[dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Ori Kam]

When creating a flow rule without the port_id pattern item, always the
PF was selected.

This commit fixes this issue, if no port_id pattern item is available
then we use the port that the flow was created on as source port.

Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")

Signed-off-by: Ori Kam <orika@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index c2a2fc6..d17adbe 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
 	union flow_dv_attr flow_attr = { .attr = 0 };
 	struct mlx5_flow_dv_tag_resource tag_resource;
 	uint32_t modify_action_position = UINT32_MAX;
+	void *match_mask = matcher.mask.buf;
+	void *match_value = dev_flow->dv.value.buf;
 
 	flow->group = attr->group;
 	if (attr->transfer)
@@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
 	}
 	dev_flow->dv.actions_n = actions_n;
 	flow->actions = action_flags;
-	if (attr->ingress && !attr->transfer &&
-	    (priv->representor || priv->master)) {
-		/* It was validated - we support unidirection flows only. */
-		assert(!attr->egress);
-		/*
-		 * Add matching on source vport index only
-		 * for ingress rules in E-Switch configurations.
-		 */
-		flow_dv_translate_item_source_vport(matcher.mask.buf,
-						    dev_flow->dv.value.buf,
-						    priv->vport_id,
-						    0xffff);
-	}
 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
-		void *match_mask = matcher.mask.buf;
-		void *match_value = dev_flow->dv.value.buf;
 
 		switch (items->type) {
 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
@@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
 		}
 		item_flags |= last_item;
 	}
+	if (((attr->ingress && !attr->transfer) ||
+	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID))) &&
+	    (priv->representor || priv->master)) {
+		/* It was validated - we support unidirection flows only. */
+		assert(!attr->egress);
+		/*
+		 * Add matching on source vport index only
+		 * for ingress rules in E-Switch configurations.
+		 */
+		if (flow_dv_translate_item_port_id(dev, match_mask,
+						   match_value, NULL))
+			return -rte_errno;
+	}
 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
 					 dev_flow->dv.value.buf));
 	dev_flow->layers = item_flags;
-- 
1.8.3.1

[dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Ori Kam]

When creating a flow rule without the port_id pattern item, always the
PF was selected.

This commit fixes this issue, if no port_id pattern item is available
then we use the port that the flow was created on as source port.

Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")

Signed-off-by: Ori Kam <orika@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index c2a2fc6..d17adbe 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
 	union flow_dv_attr flow_attr = { .attr = 0 };
 	struct mlx5_flow_dv_tag_resource tag_resource;
 	uint32_t modify_action_position = UINT32_MAX;
+	void *match_mask = matcher.mask.buf;
+	void *match_value = dev_flow->dv.value.buf;
 
 	flow->group = attr->group;
 	if (attr->transfer)
@@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
 	}
 	dev_flow->dv.actions_n = actions_n;
 	flow->actions = action_flags;
-	if (attr->ingress && !attr->transfer &&
-	    (priv->representor || priv->master)) {
-		/* It was validated - we support unidirection flows only. */
-		assert(!attr->egress);
-		/*
-		 * Add matching on source vport index only
-		 * for ingress rules in E-Switch configurations.
-		 */
-		flow_dv_translate_item_source_vport(matcher.mask.buf,
-						    dev_flow->dv.value.buf,
-						    priv->vport_id,
-						    0xffff);
-	}
 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
-		void *match_mask = matcher.mask.buf;
-		void *match_value = dev_flow->dv.value.buf;
 
 		switch (items->type) {
 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
@@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
 		}
 		item_flags |= last_item;
 	}
+	if (((attr->ingress && !attr->transfer) ||
+	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID))) &&
+	    (priv->representor || priv->master)) {
+		/* It was validated - we support unidirection flows only. */
+		assert(!attr->egress);
+		/*
+		 * Add matching on source vport index only
+		 * for ingress rules in E-Switch configurations.
+		 */
+		if (flow_dv_translate_item_port_id(dev, match_mask,
+						   match_value, NULL))
+			return -rte_errno;
+	}
 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
 					 dev_flow->dv.value.buf));
 	dev_flow->layers = item_flags;
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Yongseok Koh]

On Tue, Apr 23, 2019 at 11:19:16AM +0000, Ori Kam wrote:
> When creating a flow rule without the port_id pattern item, always the
> PF was selected.
> 
> This commit fixes this issue, if no port_id pattern item is available
> then we use the port that the flow was created on as source port.
> 
> Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> 
> Signed-off-by: Ori Kam <orika@mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
>  1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index c2a2fc6..d17adbe 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
>  	union flow_dv_attr flow_attr = { .attr = 0 };
>  	struct mlx5_flow_dv_tag_resource tag_resource;
>  	uint32_t modify_action_position = UINT32_MAX;
> +	void *match_mask = matcher.mask.buf;
> +	void *match_value = dev_flow->dv.value.buf;
>  
>  	flow->group = attr->group;
>  	if (attr->transfer)
> @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
>  	}
>  	dev_flow->dv.actions_n = actions_n;
>  	flow->actions = action_flags;
> -	if (attr->ingress && !attr->transfer &&
> -	    (priv->representor || priv->master)) {
> -		/* It was validated - we support unidirection flows only. */
> -		assert(!attr->egress);
> -		/*
> -		 * Add matching on source vport index only
> -		 * for ingress rules in E-Switch configurations.
> -		 */
> -		flow_dv_translate_item_source_vport(matcher.mask.buf,
> -						    dev_flow->dv.value.buf,
> -						    priv->vport_id,
> -						    0xffff);
> -	}
>  	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
>  		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> -		void *match_mask = matcher.mask.buf;
> -		void *match_value = dev_flow->dv.value.buf;
>  
>  		switch (items->type) {
>  		case RTE_FLOW_ITEM_TYPE_PORT_ID:
> @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
>  		}
>  		item_flags |= last_item;
>  	}
> +	if (((attr->ingress && !attr->transfer) ||
> +	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID))) &&
> +	    (priv->representor || priv->master)) {

>From the validations, I could figure out
- Either ingress (I) or egress (E) must be specified
- Transfer (T) can't be egress
- Port ID (P) is valid only if transfer (T) is specified.

(!T and I) or (T and !P)
= (I - T) + (T - P)
= I - P

So, this condition is equivalent to 
	if (attr->ingress && !!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
	    (priv->representor || priv->master)) {
		...
	}

Right?

If agreed, please add comment properly.

> +		/* It was validated - we support unidirection flows only. */
> +		assert(!attr->egress);

This comment and assert are there to mention ingress and egress are exclusive.
Is it still relevant? Did you also test the patch with enabling DEBUG?

> +		/*
> +		 * Add matching on source vport index only
> +		 * for ingress rules in E-Switch configurations.
> +		 */

Please make this comment appropriate as well.

Thanks,
Yongseok

> +		if (flow_dv_translate_item_port_id(dev, match_mask,
> +						   match_value, NULL))
> +			return -rte_errno;
> +	}
>  	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
>  					 dev_flow->dv.value.buf));
>  	dev_flow->layers = item_flags;
> -- 
> 1.8.3.1
> 

Re: [dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Yongseok Koh]

On Tue, Apr 23, 2019 at 11:19:16AM +0000, Ori Kam wrote:
> When creating a flow rule without the port_id pattern item, always the
> PF was selected.
> 
> This commit fixes this issue, if no port_id pattern item is available
> then we use the port that the flow was created on as source port.
> 
> Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> 
> Signed-off-by: Ori Kam <orika@mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
>  1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index c2a2fc6..d17adbe 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
>  	union flow_dv_attr flow_attr = { .attr = 0 };
>  	struct mlx5_flow_dv_tag_resource tag_resource;
>  	uint32_t modify_action_position = UINT32_MAX;
> +	void *match_mask = matcher.mask.buf;
> +	void *match_value = dev_flow->dv.value.buf;
>  
>  	flow->group = attr->group;
>  	if (attr->transfer)
> @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
>  	}
>  	dev_flow->dv.actions_n = actions_n;
>  	flow->actions = action_flags;
> -	if (attr->ingress && !attr->transfer &&
> -	    (priv->representor || priv->master)) {
> -		/* It was validated - we support unidirection flows only. */
> -		assert(!attr->egress);
> -		/*
> -		 * Add matching on source vport index only
> -		 * for ingress rules in E-Switch configurations.
> -		 */
> -		flow_dv_translate_item_source_vport(matcher.mask.buf,
> -						    dev_flow->dv.value.buf,
> -						    priv->vport_id,
> -						    0xffff);
> -	}
>  	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
>  		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> -		void *match_mask = matcher.mask.buf;
> -		void *match_value = dev_flow->dv.value.buf;
>  
>  		switch (items->type) {
>  		case RTE_FLOW_ITEM_TYPE_PORT_ID:
> @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
>  		}
>  		item_flags |= last_item;
>  	}
> +	if (((attr->ingress && !attr->transfer) ||
> +	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID))) &&
> +	    (priv->representor || priv->master)) {

From the validations, I could figure out
- Either ingress (I) or egress (E) must be specified
- Transfer (T) can't be egress
- Port ID (P) is valid only if transfer (T) is specified.

(!T and I) or (T and !P)
= (I - T) + (T - P)
= I - P

So, this condition is equivalent to 
	if (attr->ingress && !!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
	    (priv->representor || priv->master)) {
		...
	}

Right?

If agreed, please add comment properly.

> +		/* It was validated - we support unidirection flows only. */
> +		assert(!attr->egress);

This comment and assert are there to mention ingress and egress are exclusive.
Is it still relevant? Did you also test the patch with enabling DEBUG?

> +		/*
> +		 * Add matching on source vport index only
> +		 * for ingress rules in E-Switch configurations.
> +		 */

Please make this comment appropriate as well.

Thanks,
Yongseok

> +		if (flow_dv_translate_item_port_id(dev, match_mask,
> +						   match_value, NULL))
> +			return -rte_errno;
> +	}
>  	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
>  					 dev_flow->dv.value.buf));
>  	dev_flow->layers = item_flags;
> -- 
> 1.8.3.1
> 

Re: [dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Ori Kam]

Hi Yongseok,
PSB,

Ori

> -----Original Message-----
> From: Yongseok Koh
> Sent: Wednesday, April 24, 2019 12:03 AM
> To: Ori Kam <orika@mellanox.com>
> Cc: Shahaf Shuler <shahafs@mellanox.com>; Matan Azrad
> <matan@mellanox.com>; dev@dpdk.org
> Subject: Re: [PATCH] net/mlx5: fix E-Switch flow without port item
> 
> On Tue, Apr 23, 2019 at 11:19:16AM +0000, Ori Kam wrote:
> > When creating a flow rule without the port_id pattern item, always the
> > PF was selected.
> >
> > This commit fixes this issue, if no port_id pattern item is available
> > then we use the port that the flow was created on as source port.
> >
> > Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> >
> > Signed-off-by: Ori Kam <orika@mellanox.com>
> > ---
> >  drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
> >  1 file changed, 15 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> > index c2a2fc6..d17adbe 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
> >  	union flow_dv_attr flow_attr = { .attr = 0 };
> >  	struct mlx5_flow_dv_tag_resource tag_resource;
> >  	uint32_t modify_action_position = UINT32_MAX;
> > +	void *match_mask = matcher.mask.buf;
> > +	void *match_value = dev_flow->dv.value.buf;
> >
> >  	flow->group = attr->group;
> >  	if (attr->transfer)
> > @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
> >  	}
> >  	dev_flow->dv.actions_n = actions_n;
> >  	flow->actions = action_flags;
> > -	if (attr->ingress && !attr->transfer &&
> > -	    (priv->representor || priv->master)) {
> > -		/* It was validated - we support unidirection flows only. */
> > -		assert(!attr->egress);
> > -		/*
> > -		 * Add matching on source vport index only
> > -		 * for ingress rules in E-Switch configurations.
> > -		 */
> > -		flow_dv_translate_item_source_vport(matcher.mask.buf,
> > -						    dev_flow->dv.value.buf,
> > -						    priv->vport_id,
> > -						    0xffff);
> > -	}
> >  	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> >  		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> > -		void *match_mask = matcher.mask.buf;
> > -		void *match_value = dev_flow->dv.value.buf;
> >
> >  		switch (items->type) {
> >  		case RTE_FLOW_ITEM_TYPE_PORT_ID:
> > @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
> >  		}
> >  		item_flags |= last_item;
> >  	}
> > +	if (((attr->ingress && !attr->transfer) ||
> > +	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)))
> &&
> > +	    (priv->representor || priv->master)) {
> 
> From the validations, I could figure out
> - Either ingress (I) or egress (E) must be specified
> - Transfer (T) can't be egress
0> - Port ID (P) is valid only if transfer (T) is specified.
> 
> (!T and I) or (T and !P)
> = (I - T) + (T - P)
> = I - P
> 
> So, this condition is equivalent to
> 	if (attr->ingress && !!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
> 	    (priv->representor || priv->master)) {
> 		...
> 	}
> 
> Right?
> 

You are right that we correnlty only support ingress rules for E-Switch, I want to keep it open if in future we
will support also egress for E-Switch rules, but I guess we can update it when it will be relevant.
Regarding the if you wrote there should be only one ! not 2 since this code is relevant only if the user
didn't specified port_id.

Am I right?

> If agreed, please add comment properly.
> 
> > +		/* It was validated - we support unidirection flows only. */
> > +		assert(!attr->egress);
> 
> This comment and assert are there to mention ingress and egress are
> exclusive.
> Is it still relevant? Did you also test the patch with enabling DEBUG?
> 

I will remove this code.

> > +		/*
> > +		 * Add matching on source vport index only
> > +		 * for ingress rules in E-Switch configurations.
> > +		 */
> 
> Please make this comment appropriate as well.
> 

This comment is correct, due to the second part of the if (E-Switch mode is enabled, never mind if 
it is E-Switch rule or Nic rule), but I will remove this comment and add it as part of the if updated comment.

> Thanks,
> Yongseok
> 
> > +		if (flow_dv_translate_item_port_id(dev, match_mask,
> > +						   match_value, NULL))
> > +			return -rte_errno;
> > +	}
> >  	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
> >  					 dev_flow->dv.value.buf));
> >  	dev_flow->layers = item_flags;
> > --
> > 1.8.3.1
> >

Re: [dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Ori Kam]

Hi Yongseok,
PSB,

Ori

> -----Original Message-----
> From: Yongseok Koh
> Sent: Wednesday, April 24, 2019 12:03 AM
> To: Ori Kam <orika@mellanox.com>
> Cc: Shahaf Shuler <shahafs@mellanox.com>; Matan Azrad
> <matan@mellanox.com>; dev@dpdk.org
> Subject: Re: [PATCH] net/mlx5: fix E-Switch flow without port item
> 
> On Tue, Apr 23, 2019 at 11:19:16AM +0000, Ori Kam wrote:
> > When creating a flow rule without the port_id pattern item, always the
> > PF was selected.
> >
> > This commit fixes this issue, if no port_id pattern item is available
> > then we use the port that the flow was created on as source port.
> >
> > Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> >
> > Signed-off-by: Ori Kam <orika@mellanox.com>
> > ---
> >  drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
> >  1 file changed, 15 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> > index c2a2fc6..d17adbe 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
> >  	union flow_dv_attr flow_attr = { .attr = 0 };
> >  	struct mlx5_flow_dv_tag_resource tag_resource;
> >  	uint32_t modify_action_position = UINT32_MAX;
> > +	void *match_mask = matcher.mask.buf;
> > +	void *match_value = dev_flow->dv.value.buf;
> >
> >  	flow->group = attr->group;
> >  	if (attr->transfer)
> > @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
> >  	}
> >  	dev_flow->dv.actions_n = actions_n;
> >  	flow->actions = action_flags;
> > -	if (attr->ingress && !attr->transfer &&
> > -	    (priv->representor || priv->master)) {
> > -		/* It was validated - we support unidirection flows only. */
> > -		assert(!attr->egress);
> > -		/*
> > -		 * Add matching on source vport index only
> > -		 * for ingress rules in E-Switch configurations.
> > -		 */
> > -		flow_dv_translate_item_source_vport(matcher.mask.buf,
> > -						    dev_flow->dv.value.buf,
> > -						    priv->vport_id,
> > -						    0xffff);
> > -	}
> >  	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> >  		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> > -		void *match_mask = matcher.mask.buf;
> > -		void *match_value = dev_flow->dv.value.buf;
> >
> >  		switch (items->type) {
> >  		case RTE_FLOW_ITEM_TYPE_PORT_ID:
> > @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
> >  		}
> >  		item_flags |= last_item;
> >  	}
> > +	if (((attr->ingress && !attr->transfer) ||
> > +	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)))
> &&
> > +	    (priv->representor || priv->master)) {
> 
> From the validations, I could figure out
> - Either ingress (I) or egress (E) must be specified
> - Transfer (T) can't be egress
0> - Port ID (P) is valid only if transfer (T) is specified.
> 
> (!T and I) or (T and !P)
> = (I - T) + (T - P)
> = I - P
> 
> So, this condition is equivalent to
> 	if (attr->ingress && !!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
> 	    (priv->representor || priv->master)) {
> 		...
> 	}
> 
> Right?
> 

You are right that we correnlty only support ingress rules for E-Switch, I want to keep it open if in future we
will support also egress for E-Switch rules, but I guess we can update it when it will be relevant.
Regarding the if you wrote there should be only one ! not 2 since this code is relevant only if the user
didn't specified port_id.

Am I right?

> If agreed, please add comment properly.
> 
> > +		/* It was validated - we support unidirection flows only. */
> > +		assert(!attr->egress);
> 
> This comment and assert are there to mention ingress and egress are
> exclusive.
> Is it still relevant? Did you also test the patch with enabling DEBUG?
> 

I will remove this code.

> > +		/*
> > +		 * Add matching on source vport index only
> > +		 * for ingress rules in E-Switch configurations.
> > +		 */
> 
> Please make this comment appropriate as well.
> 

This comment is correct, due to the second part of the if (E-Switch mode is enabled, never mind if 
it is E-Switch rule or Nic rule), but I will remove this comment and add it as part of the if updated comment.

> Thanks,
> Yongseok
> 
> > +		if (flow_dv_translate_item_port_id(dev, match_mask,
> > +						   match_value, NULL))
> > +			return -rte_errno;
> > +	}
> >  	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
> >  					 dev_flow->dv.value.buf));
> >  	dev_flow->layers = item_flags;
> > --
> > 1.8.3.1
> >

Re: [dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Yongseok Koh]

> On Apr 25, 2019, at 12:02 AM, Ori Kam <orika@mellanox.com> wrote:
> 
> Hi Yongseok,
> PSB,
> 
> Ori
> 
>> -----Original Message-----
>> From: Yongseok Koh
>> Sent: Wednesday, April 24, 2019 12:03 AM
>> To: Ori Kam <orika@mellanox.com>
>> Cc: Shahaf Shuler <shahafs@mellanox.com>; Matan Azrad
>> <matan@mellanox.com>; dev@dpdk.org
>> Subject: Re: [PATCH] net/mlx5: fix E-Switch flow without port item
>> 
>> On Tue, Apr 23, 2019 at 11:19:16AM +0000, Ori Kam wrote:
>>> When creating a flow rule without the port_id pattern item, always the
>>> PF was selected.
>>> 
>>> This commit fixes this issue, if no port_id pattern item is available
>>> then we use the port that the flow was created on as source port.
>>> 
>>> Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
>>> 
>>> Signed-off-by: Ori Kam <orika@mellanox.com>
>>> ---
>>> drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
>>> 1 file changed, 15 insertions(+), 15 deletions(-)
>>> 
>>> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
>> b/drivers/net/mlx5/mlx5_flow_dv.c
>>> index c2a2fc6..d17adbe 100644
>>> --- a/drivers/net/mlx5/mlx5_flow_dv.c
>>> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
>>> @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
>>> 	union flow_dv_attr flow_attr = { .attr = 0 };
>>> 	struct mlx5_flow_dv_tag_resource tag_resource;
>>> 	uint32_t modify_action_position = UINT32_MAX;
>>> +	void *match_mask = matcher.mask.buf;
>>> +	void *match_value = dev_flow->dv.value.buf;
>>> 
>>> 	flow->group = attr->group;
>>> 	if (attr->transfer)
>>> @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
>>> 	}
>>> 	dev_flow->dv.actions_n = actions_n;
>>> 	flow->actions = action_flags;
>>> -	if (attr->ingress && !attr->transfer &&
>>> -	    (priv->representor || priv->master)) {
>>> -		/* It was validated - we support unidirection flows only. */
>>> -		assert(!attr->egress);
>>> -		/*
>>> -		 * Add matching on source vport index only
>>> -		 * for ingress rules in E-Switch configurations.
>>> -		 */
>>> -		flow_dv_translate_item_source_vport(matcher.mask.buf,
>>> -						    dev_flow->dv.value.buf,
>>> -						    priv->vport_id,
>>> -						    0xffff);
>>> -	}
>>> 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
>>> 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
>>> -		void *match_mask = matcher.mask.buf;
>>> -		void *match_value = dev_flow->dv.value.buf;
>>> 
>>> 		switch (items->type) {
>>> 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
>>> @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
>>> 		}
>>> 		item_flags |= last_item;
>>> 	}
>>> +	if (((attr->ingress && !attr->transfer) ||
>>> +	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)))
>> &&
>>> +	    (priv->representor || priv->master)) {
>> 
>> From the validations, I could figure out
>> - Either ingress (I) or egress (E) must be specified
>> - Transfer (T) can't be egress
> 0> - Port ID (P) is valid only if transfer (T) is specified.
>> 
>> (!T and I) or (T and !P)
>> = (I - T) + (T - P)
>> = I - P
>> 
>> So, this condition is equivalent to
>> 	if (attr->ingress && !!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
>> 	    (priv->representor || priv->master)) {
>> 		...
>> 	}
>> 
>> Right?

Right that was my typo.
Thanks,
Yongseok

>> 
> 
> You are right that we correnlty only support ingress rules for E-Switch, I want to keep it open if in future we
> will support also egress for E-Switch rules, but I guess we can update it when it will be relevant.
> Regarding the if you wrote there should be only one ! not 2 since this code is relevant only if the user
> didn't specified port_id.
> 
> Am I right?
> 
>> If agreed, please add comment properly.
>> 
>>> +		/* It was validated - we support unidirection flows only. */
>>> +		assert(!attr->egress);
>> 
>> This comment and assert are there to mention ingress and egress are
>> exclusive.
>> Is it still relevant? Did you also test the patch with enabling DEBUG?
>> 
> 
> I will remove this code.
> 
>>> +		/*
>>> +		 * Add matching on source vport index only
>>> +		 * for ingress rules in E-Switch configurations.
>>> +		 */
>> 
>> Please make this comment appropriate as well.
>> 
> 
> This comment is correct, due to the second part of the if (E-Switch mode is enabled, never mind if 
> it is E-Switch rule or Nic rule), but I will remove this comment and add it as part of the if updated comment.
> 
>> Thanks,
>> Yongseok
>> 
>>> +		if (flow_dv_translate_item_port_id(dev, match_mask,
>>> +						   match_value, NULL))
>>> +			return -rte_errno;
>>> +	}
>>> 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
>>> 					 dev_flow->dv.value.buf));
>>> 	dev_flow->layers = item_flags;
>>> --
>>> 1.8.3.1

Re: [dpdk-dev] [PATCH] net/mlx5: fix E-Switch flow without port item

[Yongseok Koh]

> On Apr 25, 2019, at 12:02 AM, Ori Kam <orika@mellanox.com> wrote:
> 
> Hi Yongseok,
> PSB,
> 
> Ori
> 
>> -----Original Message-----
>> From: Yongseok Koh
>> Sent: Wednesday, April 24, 2019 12:03 AM
>> To: Ori Kam <orika@mellanox.com>
>> Cc: Shahaf Shuler <shahafs@mellanox.com>; Matan Azrad
>> <matan@mellanox.com>; dev@dpdk.org
>> Subject: Re: [PATCH] net/mlx5: fix E-Switch flow without port item
>> 
>> On Tue, Apr 23, 2019 at 11:19:16AM +0000, Ori Kam wrote:
>>> When creating a flow rule without the port_id pattern item, always the
>>> PF was selected.
>>> 
>>> This commit fixes this issue, if no port_id pattern item is available
>>> then we use the port that the flow was created on as source port.
>>> 
>>> Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
>>> 
>>> Signed-off-by: Ori Kam <orika@mellanox.com>
>>> ---
>>> drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
>>> 1 file changed, 15 insertions(+), 15 deletions(-)
>>> 
>>> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
>> b/drivers/net/mlx5/mlx5_flow_dv.c
>>> index c2a2fc6..d17adbe 100644
>>> --- a/drivers/net/mlx5/mlx5_flow_dv.c
>>> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
>>> @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
>>> 	union flow_dv_attr flow_attr = { .attr = 0 };
>>> 	struct mlx5_flow_dv_tag_resource tag_resource;
>>> 	uint32_t modify_action_position = UINT32_MAX;
>>> +	void *match_mask = matcher.mask.buf;
>>> +	void *match_value = dev_flow->dv.value.buf;
>>> 
>>> 	flow->group = attr->group;
>>> 	if (attr->transfer)
>>> @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
>>> 	}
>>> 	dev_flow->dv.actions_n = actions_n;
>>> 	flow->actions = action_flags;
>>> -	if (attr->ingress && !attr->transfer &&
>>> -	    (priv->representor || priv->master)) {
>>> -		/* It was validated - we support unidirection flows only. */
>>> -		assert(!attr->egress);
>>> -		/*
>>> -		 * Add matching on source vport index only
>>> -		 * for ingress rules in E-Switch configurations.
>>> -		 */
>>> -		flow_dv_translate_item_source_vport(matcher.mask.buf,
>>> -						    dev_flow->dv.value.buf,
>>> -						    priv->vport_id,
>>> -						    0xffff);
>>> -	}
>>> 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
>>> 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
>>> -		void *match_mask = matcher.mask.buf;
>>> -		void *match_value = dev_flow->dv.value.buf;
>>> 
>>> 		switch (items->type) {
>>> 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
>>> @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
>>> 		}
>>> 		item_flags |= last_item;
>>> 	}
>>> +	if (((attr->ingress && !attr->transfer) ||
>>> +	     (attr->transfer && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)))
>> &&
>>> +	    (priv->representor || priv->master)) {
>> 
>> From the validations, I could figure out
>> - Either ingress (I) or egress (E) must be specified
>> - Transfer (T) can't be egress
> 0> - Port ID (P) is valid only if transfer (T) is specified.
>> 
>> (!T and I) or (T and !P)
>> = (I - T) + (T - P)
>> = I - P
>> 
>> So, this condition is equivalent to
>> 	if (attr->ingress && !!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
>> 	    (priv->representor || priv->master)) {
>> 		...
>> 	}
>> 
>> Right?

Right that was my typo.
Thanks,
Yongseok

>> 
> 
> You are right that we correnlty only support ingress rules for E-Switch, I want to keep it open if in future we
> will support also egress for E-Switch rules, but I guess we can update it when it will be relevant.
> Regarding the if you wrote there should be only one ! not 2 since this code is relevant only if the user
> didn't specified port_id.
> 
> Am I right?
> 
>> If agreed, please add comment properly.
>> 
>>> +		/* It was validated - we support unidirection flows only. */
>>> +		assert(!attr->egress);
>> 
>> This comment and assert are there to mention ingress and egress are
>> exclusive.
>> Is it still relevant? Did you also test the patch with enabling DEBUG?
>> 
> 
> I will remove this code.
> 
>>> +		/*
>>> +		 * Add matching on source vport index only
>>> +		 * for ingress rules in E-Switch configurations.
>>> +		 */
>> 
>> Please make this comment appropriate as well.
>> 
> 
> This comment is correct, due to the second part of the if (E-Switch mode is enabled, never mind if 
> it is E-Switch rule or Nic rule), but I will remove this comment and add it as part of the if updated comment.
> 
>> Thanks,
>> Yongseok
>> 
>>> +		if (flow_dv_translate_item_port_id(dev, match_mask,
>>> +						   match_value, NULL))
>>> +			return -rte_errno;
>>> +	}
>>> 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
>>> 					 dev_flow->dv.value.buf));
>>> 	dev_flow->layers = item_flags;
>>> --
>>> 1.8.3.1

[dpdk-dev] [PATCH v2] net/mlx5: fix E-Switch flow without port item

[Ori Kam]

When creating a flow rule without the port_id pattern item, always the
PF was selected.

This commit fixes this issue, if no port_id pattern item is available
then we use the port that the flow was created on as source port.

Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")

Signed-off-by: Ori Kam <orika@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index c2a2fc6..b3f802d 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
 	union flow_dv_attr flow_attr = { .attr = 0 };
 	struct mlx5_flow_dv_tag_resource tag_resource;
 	uint32_t modify_action_position = UINT32_MAX;
+	void *match_mask = matcher.mask.buf;
+	void *match_value = dev_flow->dv.value.buf;
 
 	flow->group = attr->group;
 	if (attr->transfer)
@@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
 	}
 	dev_flow->dv.actions_n = actions_n;
 	flow->actions = action_flags;
-	if (attr->ingress && !attr->transfer &&
-	    (priv->representor || priv->master)) {
-		/* It was validated - we support unidirection flows only. */
-		assert(!attr->egress);
-		/*
-		 * Add matching on source vport index only
-		 * for ingress rules in E-Switch configurations.
-		 */
-		flow_dv_translate_item_source_vport(matcher.mask.buf,
-						    dev_flow->dv.value.buf,
-						    priv->vport_id,
-						    0xffff);
-	}
 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
-		void *match_mask = matcher.mask.buf;
-		void *match_value = dev_flow->dv.value.buf;
 
 		switch (items->type) {
 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
@@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
 		}
 		item_flags |= last_item;
 	}
+	/*
+	 * In case of ingress traffic when E-Switch mode is enabled,
+	 * we have two cases where we need to set the source port manually.
+	 * The first one, is in case of Nic steering rule, and the second is
+	 * E-Switch rule where no port_id item was found. In both cases
+	 * the source port is set according the current port in use.
+	 */
+	if ((attr->ingress && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)) &&
+	    (priv->representor || priv->master)) {
+		if (flow_dv_translate_item_port_id(dev, match_mask,
+						   match_value, NULL))
+			return -rte_errno;
+	}
 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
 					 dev_flow->dv.value.buf));
 	dev_flow->layers = item_flags;
-- 
1.8.3.1

[dpdk-dev] [PATCH v2] net/mlx5: fix E-Switch flow without port item

[Ori Kam]

When creating a flow rule without the port_id pattern item, always the
PF was selected.

This commit fixes this issue, if no port_id pattern item is available
then we use the port that the flow was created on as source port.

Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")

Signed-off-by: Ori Kam <orika@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index c2a2fc6..b3f802d 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
 	union flow_dv_attr flow_attr = { .attr = 0 };
 	struct mlx5_flow_dv_tag_resource tag_resource;
 	uint32_t modify_action_position = UINT32_MAX;
+	void *match_mask = matcher.mask.buf;
+	void *match_value = dev_flow->dv.value.buf;
 
 	flow->group = attr->group;
 	if (attr->transfer)
@@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
 	}
 	dev_flow->dv.actions_n = actions_n;
 	flow->actions = action_flags;
-	if (attr->ingress && !attr->transfer &&
-	    (priv->representor || priv->master)) {
-		/* It was validated - we support unidirection flows only. */
-		assert(!attr->egress);
-		/*
-		 * Add matching on source vport index only
-		 * for ingress rules in E-Switch configurations.
-		 */
-		flow_dv_translate_item_source_vport(matcher.mask.buf,
-						    dev_flow->dv.value.buf,
-						    priv->vport_id,
-						    0xffff);
-	}
 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
-		void *match_mask = matcher.mask.buf;
-		void *match_value = dev_flow->dv.value.buf;
 
 		switch (items->type) {
 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
@@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
 		}
 		item_flags |= last_item;
 	}
+	/*
+	 * In case of ingress traffic when E-Switch mode is enabled,
+	 * we have two cases where we need to set the source port manually.
+	 * The first one, is in case of Nic steering rule, and the second is
+	 * E-Switch rule where no port_id item was found. In both cases
+	 * the source port is set according the current port in use.
+	 */
+	if ((attr->ingress && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)) &&
+	    (priv->representor || priv->master)) {
+		if (flow_dv_translate_item_port_id(dev, match_mask,
+						   match_value, NULL))
+			return -rte_errno;
+	}
 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
 					 dev_flow->dv.value.buf));
 	dev_flow->layers = item_flags;
-- 
1.8.3.1

Re: [dpdk-dev] [PATCH v2] net/mlx5: fix E-Switch flow without port item

[Yongseok Koh]

> On Apr 25, 2019, at 5:20 AM, Ori Kam <orika@mellanox.com> wrote:
> 
> When creating a flow rule without the port_id pattern item, always the
> PF was selected.
> 
> This commit fixes this issue, if no port_id pattern item is available
> then we use the port that the flow was created on as source port.
> 
> Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> 
> Signed-off-by: Ori Kam <orika@mellanox.com>
> ---
Acked-by: Yongseok Koh <yskoh@mellanox.com>

> drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index c2a2fc6..b3f802d 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
> 	union flow_dv_attr flow_attr = { .attr = 0 };
> 	struct mlx5_flow_dv_tag_resource tag_resource;
> 	uint32_t modify_action_position = UINT32_MAX;
> +	void *match_mask = matcher.mask.buf;
> +	void *match_value = dev_flow->dv.value.buf;
> 
> 	flow->group = attr->group;
> 	if (attr->transfer)
> @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
> 	}
> 	dev_flow->dv.actions_n = actions_n;
> 	flow->actions = action_flags;
> -	if (attr->ingress && !attr->transfer &&
> -	    (priv->representor || priv->master)) {
> -		/* It was validated - we support unidirection flows only. */
> -		assert(!attr->egress);
> -		/*
> -		 * Add matching on source vport index only
> -		 * for ingress rules in E-Switch configurations.
> -		 */
> -		flow_dv_translate_item_source_vport(matcher.mask.buf,
> -						    dev_flow->dv.value.buf,
> -						    priv->vport_id,
> -						    0xffff);
> -	}
> 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> -		void *match_mask = matcher.mask.buf;
> -		void *match_value = dev_flow->dv.value.buf;
> 
> 		switch (items->type) {
> 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
> @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
> 		}
> 		item_flags |= last_item;
> 	}
> +	/*
> +	 * In case of ingress traffic when E-Switch mode is enabled,
> +	 * we have two cases where we need to set the source port manually.
> +	 * The first one, is in case of Nic steering rule, and the second is
> +	 * E-Switch rule where no port_id item was found. In both cases
> +	 * the source port is set according the current port in use.
> +	 */
> +	if ((attr->ingress && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)) &&
> +	    (priv->representor || priv->master)) {
> +		if (flow_dv_translate_item_port_id(dev, match_mask,
> +						   match_value, NULL))
> +			return -rte_errno;
> +	}
> 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
> 					 dev_flow->dv.value.buf));
> 	dev_flow->layers = item_flags;
> -- 
> 1.8.3.1
> 

Re: [dpdk-dev] [PATCH v2] net/mlx5: fix E-Switch flow without port item

[Yongseok Koh]

> On Apr 25, 2019, at 5:20 AM, Ori Kam <orika@mellanox.com> wrote:
> 
> When creating a flow rule without the port_id pattern item, always the
> PF was selected.
> 
> This commit fixes this issue, if no port_id pattern item is available
> then we use the port that the flow was created on as source port.
> 
> Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> 
> Signed-off-by: Ori Kam <orika@mellanox.com>
> ---
Acked-by: Yongseok Koh <yskoh@mellanox.com>

> drivers/net/mlx5/mlx5_flow_dv.c | 30 +++++++++++++++---------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index c2a2fc6..b3f802d 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -3623,6 +3623,8 @@ struct field_modify_info modify_tcp[] = {
> 	union flow_dv_attr flow_attr = { .attr = 0 };
> 	struct mlx5_flow_dv_tag_resource tag_resource;
> 	uint32_t modify_action_position = UINT32_MAX;
> +	void *match_mask = matcher.mask.buf;
> +	void *match_value = dev_flow->dv.value.buf;
> 
> 	flow->group = attr->group;
> 	if (attr->transfer)
> @@ -3895,23 +3897,8 @@ struct field_modify_info modify_tcp[] = {
> 	}
> 	dev_flow->dv.actions_n = actions_n;
> 	flow->actions = action_flags;
> -	if (attr->ingress && !attr->transfer &&
> -	    (priv->representor || priv->master)) {
> -		/* It was validated - we support unidirection flows only. */
> -		assert(!attr->egress);
> -		/*
> -		 * Add matching on source vport index only
> -		 * for ingress rules in E-Switch configurations.
> -		 */
> -		flow_dv_translate_item_source_vport(matcher.mask.buf,
> -						    dev_flow->dv.value.buf,
> -						    priv->vport_id,
> -						    0xffff);
> -	}
> 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
> 		int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
> -		void *match_mask = matcher.mask.buf;
> -		void *match_value = dev_flow->dv.value.buf;
> 
> 		switch (items->type) {
> 		case RTE_FLOW_ITEM_TYPE_PORT_ID:
> @@ -4018,6 +4005,19 @@ struct field_modify_info modify_tcp[] = {
> 		}
> 		item_flags |= last_item;
> 	}
> +	/*
> +	 * In case of ingress traffic when E-Switch mode is enabled,
> +	 * we have two cases where we need to set the source port manually.
> +	 * The first one, is in case of Nic steering rule, and the second is
> +	 * E-Switch rule where no port_id item was found. In both cases
> +	 * the source port is set according the current port in use.
> +	 */
> +	if ((attr->ingress && !(item_flags & MLX5_FLOW_ITEM_PORT_ID)) &&
> +	    (priv->representor || priv->master)) {
> +		if (flow_dv_translate_item_port_id(dev, match_mask,
> +						   match_value, NULL))
> +			return -rte_errno;
> +	}
> 	assert(!flow_dv_check_valid_spec(matcher.mask.buf,
> 					 dev_flow->dv.value.buf));
> 	dev_flow->layers = item_flags;
> -- 
> 1.8.3.1
> 

Re: [dpdk-dev] [PATCH v2] net/mlx5: fix E-Switch flow without port item

[Shahaf Shuler]

Thursday, April 25, 2019 8:54 PM, Yongseok Koh:
> Subject: Re: [PATCH v2] net/mlx5: fix E-Switch flow without port item
> 
> 
> 
> > On Apr 25, 2019, at 5:20 AM, Ori Kam <orika@mellanox.com> wrote:
> >
> > When creating a flow rule without the port_id pattern item, always the
> > PF was selected.
> >
> > This commit fixes this issue, if no port_id pattern item is available
> > then we use the port that the flow was created on as source port.
> >
> > Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> >
> > Signed-off-by: Ori Kam <orika@mellanox.com>
> > ---
> Acked-by: Yongseok Koh <yskoh@mellanox.com>

Applied to next-net-mlx, thanks.

Re: [dpdk-dev] [PATCH v2] net/mlx5: fix E-Switch flow without port item

[Shahaf Shuler]

Thursday, April 25, 2019 8:54 PM, Yongseok Koh:
> Subject: Re: [PATCH v2] net/mlx5: fix E-Switch flow without port item
> 
> 
> 
> > On Apr 25, 2019, at 5:20 AM, Ori Kam <orika@mellanox.com> wrote:
> >
> > When creating a flow rule without the port_id pattern item, always the
> > PF was selected.
> >
> > This commit fixes this issue, if no port_id pattern item is available
> > then we use the port that the flow was created on as source port.
> >
> > Fixes: 822fb3195348 ("net/mlx5: add port id item to Direct Verbs")
> >
> > Signed-off-by: Ori Kam <orika@mellanox.com>
> > ---
> Acked-by: Yongseok Koh <yskoh@mellanox.com>

Applied to next-net-mlx, thanks.