* [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP
@ 2019-11-05 8:03 Xiaoyu Min
2019-11-06 11:26 ` Ori Kam
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Xiaoyu Min @ 2019-11-05 8:03 UTC (permalink / raw)
To: orika, Matan Azrad, Shahaf Shuler, Viacheslav Ovsiienko; +Cc: dev
Some applications, i.e. OVS, have rule like:
[1] pattern ipv4 / end actions ...
which intends to match ipv4 only on non-vlan ethernet and MLX5 NIC
supports this.
So PMD should accept this.
Fixes: 906a2efae8da ("net/mlx5: validate flow rule item order")
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.c | 28 ++++++++++------------------
1 file changed, 10 insertions(+), 18 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index b4b08f4c6c..24ea4a72b5 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -1276,11 +1276,17 @@ mlx5_flow_validate_item_eth(const struct rte_flow_item *item,
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"multiple L2 layers not supported");
- if (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_L3))
+ if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_L3)) ||
+ (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_L3)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "inner L2 layer should not "
- "follow inner L3 layers");
+ "L2 layer should not follow "
+ "L3 layers");
+ if ((!tunnel && (item_flags & MLX5_FLOW_LAYER_OUTER_VLAN)) ||
+ (tunnel && (item_flags & MLX5_FLOW_LAYER_INNER_VLAN)))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L2 layer should not follow VLAN");
if (!mask)
mask = &rte_flow_item_eth_mask;
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
@@ -1327,8 +1333,6 @@ mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
MLX5_FLOW_LAYER_OUTER_VLAN;
- const uint64_t l2m = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
- MLX5_FLOW_LAYER_OUTER_L2;
if (item_flags & vlanm)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
@@ -1336,11 +1340,7 @@ mlx5_flow_validate_item_vlan(const struct rte_flow_item *item,
else if ((item_flags & l34m) != 0)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
- "L2 layer cannot follow L3/L4 layer");
- else if ((item_flags & l2m) == 0)
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, item,
- "no L2 layer before VLAN");
+ "VLAN cannot follow L3/L4 layer");
if (!mask)
mask = &rte_flow_item_vlan_mask;
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
@@ -1453,10 +1453,6 @@ mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"L3 cannot follow an NVGRE layer.");
- else if (!tunnel && !(item_flags & MLX5_FLOW_LAYER_OUTER_L2))
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, item,
- "no L2 layer before IPV4");
if (!mask)
mask = &rte_flow_item_ipv4_mask;
else if (mask->hdr.next_proto_id != 0 &&
@@ -1548,10 +1544,6 @@ mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"L3 cannot follow an NVGRE layer.");
- else if (!tunnel && !(item_flags & MLX5_FLOW_LAYER_OUTER_L2))
- return rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, item,
- "no L2 layer before IPV6");
if (!mask)
mask = &rte_flow_item_ipv6_mask;
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
--
2.24.0.rc0.3.g12a4aeaad8
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP
2019-11-05 8:03 [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP Xiaoyu Min
@ 2019-11-06 11:26 ` Ori Kam
2019-11-06 12:11 ` Slava Ovsiienko
2019-11-07 14:00 ` Raslan Darawsheh
2 siblings, 0 replies; 4+ messages in thread
From: Ori Kam @ 2019-11-06 11:26 UTC (permalink / raw)
To: Jack Min, Matan Azrad, Shahaf Shuler, Slava Ovsiienko; +Cc: dev
> -----Original Message-----
> From: Xiaoyu Min <jackmin@mellanox.com>
> Sent: Tuesday, November 5, 2019 10:03 AM
> To: Ori Kam <orika@mellanox.com>; Matan Azrad <matan@mellanox.com>;
> Shahaf Shuler <shahafs@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org
> Subject: [PATCH] net/mlx5: allow pattern start from IP
>
> Some applications, i.e. OVS, have rule like:
>
> [1] pattern ipv4 / end actions ...
>
> which intends to match ipv4 only on non-vlan ethernet and MLX5 NIC
> supports this.
>
> So PMD should accept this.
>
> Fixes: 906a2efae8da ("net/mlx5: validate flow rule item order")
>
> Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
> ---
Acked-by: Ori Kam <orika@mellanox.com>
Thanks,
Ori
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP
2019-11-05 8:03 [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP Xiaoyu Min
2019-11-06 11:26 ` Ori Kam
@ 2019-11-06 12:11 ` Slava Ovsiienko
2019-11-07 14:00 ` Raslan Darawsheh
2 siblings, 0 replies; 4+ messages in thread
From: Slava Ovsiienko @ 2019-11-06 12:11 UTC (permalink / raw)
To: Jack Min, Ori Kam, Matan Azrad, Shahaf Shuler; +Cc: dev
> -----Original Message-----
> From: Xiaoyu Min <jackmin@mellanox.com>
> Sent: Tuesday, November 5, 2019 10:03
> To: Ori Kam <orika@mellanox.com>; Matan Azrad <matan@mellanox.com>;
> Shahaf Shuler <shahafs@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org
> Subject: [PATCH] net/mlx5: allow pattern start from IP
>
> Some applications, i.e. OVS, have rule like:
>
> [1] pattern ipv4 / end actions ...
>
> which intends to match ipv4 only on non-vlan ethernet and MLX5 NIC
> supports this.
>
> So PMD should accept this.
>
> Fixes: 906a2efae8da ("net/mlx5: validate flow rule item order")
>
> Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP
2019-11-05 8:03 [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP Xiaoyu Min
2019-11-06 11:26 ` Ori Kam
2019-11-06 12:11 ` Slava Ovsiienko
@ 2019-11-07 14:00 ` Raslan Darawsheh
2 siblings, 0 replies; 4+ messages in thread
From: Raslan Darawsheh @ 2019-11-07 14:00 UTC (permalink / raw)
To: Jack Min, Ori Kam, Matan Azrad, Shahaf Shuler, Slava Ovsiienko
Cc: dev, stable
Hi,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Xiaoyu Min
> Sent: Tuesday, November 5, 2019 10:03 AM
> To: Ori Kam <orika@mellanox.com>; Matan Azrad <matan@mellanox.com>;
> Shahaf Shuler <shahafs@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>
> Cc: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP
>
> Some applications, i.e. OVS, have rule like:
>
> [1] pattern ipv4 / end actions ...
>
> which intends to match ipv4 only on non-vlan ethernet and MLX5 NIC
> supports this.
>
> So PMD should accept this.
>
> Fixes: 906a2efae8da ("net/mlx5: validate flow rule item order")
added
Cc: stable@dpdk.org
>
> Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow.c | 28 ++++++++++------------------
> 1 file changed, 10 insertions(+), 18 deletions(-)
>
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-11-07 14:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-05 8:03 [dpdk-dev] [PATCH] net/mlx5: allow pattern start from IP Xiaoyu Min
2019-11-06 11:26 ` Ori Kam
2019-11-06 12:11 ` Slava Ovsiienko
2019-11-07 14:00 ` Raslan Darawsheh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).