DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Li, Xiaoyun" <xiaoyun.li@intel.com>
To: "Yigit, Ferruh" <ferruh.yigit@intel.com>,
	"Singh, Aman Deep" <aman.deep.singh@intel.com>,
	"olivier.matz@6wind.com" <olivier.matz@6wind.com>,
	"mb@smartsharesystems.com" <mb@smartsharesystems.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	"stephen@networkplumber.org" <stephen@networkplumber.org>,
	"Medvedkin, Vladimir" <vladimir.medvedkin@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "Pai G, Sunil" <sunil.pai.g@intel.com>
Subject: RE: [PATCH v5 2/2] testpmd: fix l4 sw csum over multi segments
Date: Mon, 24 Jan 2022 09:43:42 +0000	[thread overview]
Message-ID: <DM4PR11MB5534CE7BAA79960417CD115D995E9@DM4PR11MB5534.namprd11.prod.outlook.com> (raw)
In-Reply-To: <1c366b66-4e1a-94ba-e1af-161a1dded713@intel.com>

Hi

> -----Original Message-----
> From: Yigit, Ferruh <ferruh.yigit@intel.com>
> Sent: Friday, January 21, 2022 15:17
> To: Li, Xiaoyun <xiaoyun.li@intel.com>; Singh, Aman Deep
> <aman.deep.singh@intel.com>; olivier.matz@6wind.com;
> mb@smartsharesystems.com; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>; stephen@networkplumber.org;
> Medvedkin, Vladimir <vladimir.medvedkin@intel.com>
> Cc: dev@dpdk.org; Pai G, Sunil <sunil.pai.g@intel.com>
> Subject: Re: [PATCH v5 2/2] testpmd: fix l4 sw csum over multi segments
> 
> On 1/6/2022 4:03 PM, Xiaoyun Li wrote:
> > In csum forwarding mode, software UDP/TCP csum calculation only takes
> > the first segment into account while using the whole packet length so
> > the calculation will read invalid memory region with multi-segments
> > packets and will get wrong value.
> > This patch fixes this issue.
> >
> > Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> > Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
> 
> Can you please check following check-git-log.sh warnings:
> 
> ./devtools/check-git-log.sh -2
> Wrong headline label:
>          testpmd: fix l4 sw csum over multi segments Wrong headline case:
>                          "testpmd: fix l4 sw csum over multi segments": l4 --> L4 Wrong
> headline case:
>                          "testpmd: fix l4 sw csum over multi segments": sw --> SW
> Missing 'Fixes' tag:
>          testpmd: fix l4 sw csum over multi segments
> 

Will fix this in next version.
BTW, should I change the patch name to "app/testpmd: enable L4 SW csum over multi segments"? or ignore the fixline complaining?

> 
> 
> > ---
> >   app/test-pmd/csumonly.c | 41 ++++++++++++++++++++++++++-----------
> ----
> >   1 file changed, 26 insertions(+), 15 deletions(-)
> >
> > diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c index
> > 2aeea243b6..0fbe1f1be7 100644
> > --- a/app/test-pmd/csumonly.c
> > +++ b/app/test-pmd/csumonly.c
> > @@ -96,12 +96,13 @@ struct simple_gre_hdr {
> >   } __rte_packed;
> >
> >   static uint16_t
> > -get_udptcp_checksum(void *l3_hdr, void *l4_hdr, uint16_t ethertype)
> > +get_udptcp_checksum(struct rte_mbuf *m, void *l3_hdr, uint16_t l4_off,
> > +		    uint16_t ethertype)
> >   {
> >   	if (ethertype == _htons(RTE_ETHER_TYPE_IPV4))
> > -		return rte_ipv4_udptcp_cksum(l3_hdr, l4_hdr);
> > +		return rte_ipv4_udptcp_cksum_mbuf(m, l3_hdr, l4_off);
> >   	else /* assume ethertype == RTE_ETHER_TYPE_IPV6 */
> > -		return rte_ipv6_udptcp_cksum(l3_hdr, l4_hdr);
> > +		return rte_ipv6_udptcp_cksum_mbuf(m, l3_hdr, l4_off);
> >   }
> >
> >   /* Parse an IPv4 header to fill l3_len, l4_len, and l4_proto */ @@
> > -460,7 +461,7 @@ parse_encap_ip(void *encap_ip, struct
> testpmd_offload_info *info)
> >    * depending on the testpmd command line configuration */
> >   static uint64_t
> >   process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info
> *info,
> > -	uint64_t tx_offloads)
> > +	uint64_t tx_offloads, struct rte_mbuf *m)
> >   {
> >   	struct rte_ipv4_hdr *ipv4_hdr = l3_hdr;
> >   	struct rte_udp_hdr *udp_hdr;
> > @@ -468,6 +469,7 @@ process_inner_cksums(void *l3_hdr, const struct
> testpmd_offload_info *info,
> >   	struct rte_sctp_hdr *sctp_hdr;
> >   	uint64_t ol_flags = 0;
> >   	uint32_t max_pkt_len, tso_segsz = 0;
> > +	uint16_t l4_off;
> >
> >   	/* ensure packet is large enough to require tso */
> >   	if (!info->is_tunnel) {
> > @@ -510,9 +512,15 @@ process_inner_cksums(void *l3_hdr, const struct
> testpmd_offload_info *info,
> >   			if (tx_offloads &
> RTE_ETH_TX_OFFLOAD_UDP_CKSUM) {
> >   				ol_flags |= RTE_MBUF_F_TX_UDP_CKSUM;
> >   			} else {
> > +				if (info->is_tunnel)
> > +					l4_off = info->l2_len +
> > +						 info->outer_l3_len +
> > +						 info->l2_len + info->l3_len;
> > +				else
> > +					l4_off = info->l2_len +	info->l3_len;
> >   				udp_hdr->dgram_cksum = 0;
> >   				udp_hdr->dgram_cksum =
> > -					get_udptcp_checksum(l3_hdr,
> udp_hdr,
> > +					get_udptcp_checksum(m, l3_hdr,
> l4_off,
> >   						info->ethertype);
> >   			}
> >   		}
> > @@ -527,9 +535,14 @@ process_inner_cksums(void *l3_hdr, const struct
> testpmd_offload_info *info,
> >   		else if (tx_offloads & RTE_ETH_TX_OFFLOAD_TCP_CKSUM) {
> >   			ol_flags |= RTE_MBUF_F_TX_TCP_CKSUM;
> >   		} else {
> > +			if (info->is_tunnel)
> > +				l4_off = info->l2_len + info->outer_l3_len +
> > +					 info->l2_len + info->l3_len;
> > +			else
> > +				l4_off = info->l2_len + info->l3_len;
> >   			tcp_hdr->cksum = 0;
> >   			tcp_hdr->cksum =
> > -				get_udptcp_checksum(l3_hdr, tcp_hdr,
> > +				get_udptcp_checksum(m, l3_hdr, l4_off,
> >   					info->ethertype);
> >   		}
> >   #ifdef RTE_LIB_GSO
> > @@ -557,7 +570,7 @@ process_inner_cksums(void *l3_hdr, const struct
> testpmd_offload_info *info,
> >   /* Calculate the checksum of outer header */
> >   static uint64_t
> >   process_outer_cksums(void *outer_l3_hdr, struct testpmd_offload_info
> *info,
> > -	uint64_t tx_offloads, int tso_enabled)
> > +	uint64_t tx_offloads, int tso_enabled, struct rte_mbuf *m)
> >   {
> >   	struct rte_ipv4_hdr *ipv4_hdr = outer_l3_hdr;
> >   	struct rte_ipv6_hdr *ipv6_hdr = outer_l3_hdr; @@ -611,12 +624,9
> @@
> > process_outer_cksums(void *outer_l3_hdr, struct testpmd_offload_info
> *info,
> >   	/* do not recalculate udp cksum if it was 0 */
> >   	if (udp_hdr->dgram_cksum != 0) {
> >   		udp_hdr->dgram_cksum = 0;
> > -		if (info->outer_ethertype == _htons(RTE_ETHER_TYPE_IPV4))
> > -			udp_hdr->dgram_cksum =
> > -				rte_ipv4_udptcp_cksum(ipv4_hdr, udp_hdr);
> > -		else
> > -			udp_hdr->dgram_cksum =
> > -				rte_ipv6_udptcp_cksum(ipv6_hdr, udp_hdr);
> > +		udp_hdr->dgram_cksum = get_udptcp_checksum(m,
> outer_l3_hdr,
> > +					info->l2_len + info->outer_l3_len,
> > +					info->outer_ethertype);
> >   	}
> >
> >   	return ol_flags;
> > @@ -957,7 +967,7 @@ pkt_burst_checksum_forward(struct fwd_stream
> *fs)
> >
> >   		/* process checksums of inner headers first */
> >   		tx_ol_flags |= process_inner_cksums(l3_hdr, &info,
> > -			tx_offloads);
> > +			tx_offloads, m);
> >
> >   		/* Then process outer headers if any. Note that the software
> >   		 * checksum will be wrong if one of the inner checksums is
> @@
> > -965,7 +975,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
> >   		if (info.is_tunnel == 1) {
> >   			tx_ol_flags |= process_outer_cksums(outer_l3_hdr,
> &info,
> >   					tx_offloads,
> > -					!!(tx_ol_flags &
> RTE_MBUF_F_TX_TCP_SEG));
> > +					!!(tx_ol_flags &
> RTE_MBUF_F_TX_TCP_SEG),
> > +					m);
> >   		}
> >
> >   		/* step 3: fill the mbuf meta data (flags and header lengths)
> */


  reply	other threads:[~2022-01-24  9:43 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-15  5:13 [dpdk-dev] [PATCH] app/testpmd: " Xiaoyun Li
2021-10-15  8:09 ` David Marchand
2021-10-18  2:02   ` Li, Xiaoyun
2021-10-18  2:16 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
2021-10-18  3:00 ` [dpdk-dev] [PATCH] " Stephen Hemminger
2021-10-18  3:16   ` Li, Xiaoyun
2021-10-18  4:40     ` Li, Xiaoyun
2021-10-18 10:15     ` Ananyev, Konstantin
2021-10-19  1:54       ` Li, Xiaoyun
2021-10-20 10:12 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
2021-10-27 10:48   ` Ferruh Yigit
2021-10-27 11:29     ` Morten Brørup
2021-10-29  8:29       ` Olivier Matz
2021-12-03 11:31         ` Li, Xiaoyun
2021-12-03 11:38 ` [PATCH v4 0/2] Add functions to calculate UDP/TCP cksum in mbuf Xiaoyun Li
2021-12-03 11:38   ` [PATCH v4 1/2] net: add " Xiaoyun Li
2021-12-15 11:33     ` Singh, Aman Deep
2022-01-04 15:18       ` Li, Xiaoyun
2022-01-04 15:40         ` Li, Xiaoyun
2022-01-06 12:56           ` Singh, Aman Deep
2021-12-03 11:38   ` [PATCH v4 2/2] testpmd: fix l4 sw csum over multi segments Xiaoyun Li
2021-12-08  6:10   ` [PATCH v4 0/2] Add functions to calculate UDP/TCP cksum in mbuf Pai G, Sunil
2022-01-06 16:03 ` [PATCH v5 " Xiaoyun Li
2022-01-06 16:03   ` [PATCH v5 1/2] net: add " Xiaoyun Li
2022-01-21 15:16     ` Ferruh Yigit
2022-01-06 16:03   ` [PATCH v5 2/2] testpmd: fix l4 sw csum over multi segments Xiaoyun Li
2022-01-21 15:16     ` Ferruh Yigit
2022-01-24  9:43       ` Li, Xiaoyun [this message]
2022-01-24 10:16         ` Ferruh Yigit
2022-01-21 17:09     ` Kevin Traynor
2022-01-24  9:16       ` Ferruh Yigit
2022-01-24 10:30         ` Kevin Traynor
2022-01-24 11:02           ` Ferruh Yigit
2022-01-24 12:28 ` [PATCH v6 0/2] Add functions to calculate UDP/TCP cksum in mbuf Xiaoyun Li
2022-01-24 12:28   ` [PATCH v6 1/2] net: add " Xiaoyun Li
2022-02-03 12:41     ` Ferruh Yigit
2022-01-24 12:28   ` [PATCH v6 2/2] app/testpmd: enable L4 SW csum over multi segments Xiaoyun Li
2022-02-04 13:12     ` Ferruh Yigit
2022-02-04 13:12   ` [PATCH v6 0/2] Add functions to calculate UDP/TCP cksum in mbuf Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM4PR11MB5534CE7BAA79960417CD115D995E9@DM4PR11MB5534.namprd11.prod.outlook.com \
    --to=xiaoyun.li@intel.com \
    --cc=aman.deep.singh@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=mb@smartsharesystems.com \
    --cc=olivier.matz@6wind.com \
    --cc=stephen@networkplumber.org \
    --cc=sunil.pai.g@intel.com \
    --cc=vladimir.medvedkin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).