From: "Sebastian, Selwin" <Selwin.Sebastian@amd.com>
To: "Ande, Venkat Kumar" <VenkatKumar.Ande@amd.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: RE: [PATCH v2 20/25] net/axgbe: replace mii generic macro for c45 with AXGBE
Date: Mon, 20 May 2024 10:43:05 +0000 [thread overview]
Message-ID: <DM4PR12MB50552D72129DADE13B1CD5EF8DE92@DM4PR12MB5055.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20240507124305.2318-20-venkatkumar.ande@amd.com>
[AMD Official Use Only - AMD Internal Distribution Only]
Acked-by: Selwin Sebastian<selwin.sebastian@amd.com>
-----Original Message-----
From: Ande, Venkat Kumar <VenkatKumar.Ande@amd.com>
Sent: Tuesday, May 7, 2024 6:13 PM
To: dev@dpdk.org
Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Ande, Venkat Kumar <VenkatKumar.Ande@amd.com>
Subject: [PATCH v2 20/25] net/axgbe: replace mii generic macro for c45 with AXGBE
The axgbe driver reuses MII_ADDR_C45 for its own purpose. The values derived with it are never passed to phylib or a linux MDIO bus driver.
In order that MII_ADDR_C45 can be removed, add an AXGBE specific
Signed-off-by: Venkat Kumar Ande <venkatkumar.ande@amd.com>
---
drivers/net/axgbe/axgbe_common.h | 4 ++--
drivers/net/axgbe/axgbe_dev.c | 8 ++++----
drivers/net/axgbe/axgbe_phy.h | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/axgbe/axgbe_common.h b/drivers/net/axgbe/axgbe_common.h
index 51532fb34a..1a43192630 100644
--- a/drivers/net/axgbe/axgbe_common.h
+++ b/drivers/net/axgbe/axgbe_common.h
@@ -1732,14 +1732,14 @@ do { \
*/
#define XMDIO_READ(_pdata, _mmd, _reg) \
((_pdata)->hw_if.read_mmd_regs((_pdata), 0, \
- MII_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff)))
+ AXGBE_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff)))
#define XMDIO_READ_BITS(_pdata, _mmd, _reg, _mask) \
(XMDIO_READ((_pdata), _mmd, _reg) & _mask)
#define XMDIO_WRITE(_pdata, _mmd, _reg, _val) \
((_pdata)->hw_if.write_mmd_regs((_pdata), 0, \
- MII_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff), (_val)))
+ AXGBE_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff), (_val)))
#define XMDIO_WRITE_BITS(_pdata, _mmd, _reg, _mask, _val) \
do { \
diff --git a/drivers/net/axgbe/axgbe_dev.c b/drivers/net/axgbe/axgbe_dev.c index fa7324efa7..ebe64295aa 100644
--- a/drivers/net/axgbe/axgbe_dev.c
+++ b/drivers/net/axgbe/axgbe_dev.c
@@ -207,8 +207,8 @@ static int axgbe_read_mmd_regs_v2(struct axgbe_port *pdata,
unsigned int mmd_address, index, offset;
int mmd_data;
- if (mmd_reg & MII_ADDR_C45)
- mmd_address = mmd_reg & ~MII_ADDR_C45;
+ if (mmd_reg & AXGBE_ADDR_C45)
+ mmd_address = mmd_reg & ~AXGBE_ADDR_C45;
else
mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
@@ -241,8 +241,8 @@ static void axgbe_write_mmd_regs_v2(struct axgbe_port *pdata, {
unsigned int mmd_address, index, offset;
- if (mmd_reg & MII_ADDR_C45)
- mmd_address = mmd_reg & ~MII_ADDR_C45;
+ if (mmd_reg & AXGBE_ADDR_C45)
+ mmd_address = mmd_reg & ~AXGBE_ADDR_C45;
else
mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
diff --git a/drivers/net/axgbe/axgbe_phy.h b/drivers/net/axgbe/axgbe_phy.h index 5b844e81cd..eee3afc370 100644
--- a/drivers/net/axgbe/axgbe_phy.h
+++ b/drivers/net/axgbe/axgbe_phy.h
@@ -16,7 +16,7 @@
/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
* IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips.
*/
-#define MII_ADDR_C45 (1 << 30)
+#define AXGBE_ADDR_C45 (1 << 30)
/* Basic mode status register. */
#define BMSR_LSTATUS 0x0004 /* Link status */
--
2.34.1
next prev parent reply other threads:[~2024-05-20 10:43 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240412125013.10498-1-VenkatKumar.Ande@amd.com>
2024-05-07 12:42 ` [PATCH v2 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Venkat Kumar Ande
2024-05-07 12:42 ` [PATCH v2 02/25] net/axgbe: reset link when the link never comes back Venkat Kumar Ande
2024-05-20 10:40 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 03/25] net/axgbe: fix fluctuations for 1G BELFUSE SFP Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 04/25] net/axgbe: update DMA coherency values Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 05/25] net/axgbe: disable interrupts during device removal Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 06/25] net/axgbe: yellow carp devices do not need rrc Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 07/25] net/axgbe: enable PLL control for fixed PHY modes only Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-20 11:25 ` Ferruh Yigit
2024-05-07 12:42 ` [PATCH v2 08/25] net/axgbe: fix the SFP codes check for DAC cables Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 09/25] net/axgbe: fix logic around active and passive cables Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 10/25] net/axgbe: check only the minimum speed for cables Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 11/25] net/axgbe: flow Tx Ctrl Registers are h/w version dependent Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 12/25] net/axgbe: delay AN timeout during KR training Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 13/25] net/axgbe: remove use of comm owned field Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 14/25] net/axgbe: remove field of SFP diagnostic support Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 15/25] net/axgbe: improve SFP 100Mbps auto-negotiation Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 16/25] net/axgbe: remove unnecessary conversion to bool Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 17/25] net/axgbe: use definitions for mailbox commands Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 18/25] net/axgbe: add support for 10 Mbps speed Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 19/25] net/axgbe: separate C22 and C45 transactions Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 20/25] net/axgbe: replace mii generic macro for c45 with AXGBE Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin [this message]
2024-05-20 11:25 ` Ferruh Yigit
2024-05-07 12:43 ` [PATCH v2 21/25] net/axgbe: add 2.5GbE support to 10G BaseT mode Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 22/25] net/axgbe: add support for Rx adaptation Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 23/25] net/axgbe: fix the false linkup in axgbe PHY status Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-20 11:25 ` Ferruh Yigit
2024-05-07 12:43 ` [PATCH v2 24/25] net/axgbe: extend 10Mbps support to MAC version 21H Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 25/25] net/axgbe: modify debug messages Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-20 10:40 ` [PATCH v2 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Sebastian, Selwin
2024-05-20 11:26 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM4PR12MB50552D72129DADE13B1CD5EF8DE92@DM4PR12MB5055.namprd12.prod.outlook.com \
--to=selwin.sebastian@amd.com \
--cc=VenkatKumar.Ande@amd.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).