From: "Sebastian, Selwin" <Selwin.Sebastian@amd.com>
To: "Ande, Venkat Kumar" <VenkatKumar.Ande@amd.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: "stable@dpdk.org" <stable@dpdk.org>
Subject: RE: [PATCH v2 23/25] net/axgbe: fix the false linkup in axgbe PHY status
Date: Mon, 20 May 2024 10:43:23 +0000 [thread overview]
Message-ID: <DM4PR12MB505531883CF40AA0A17BF60F8DE92@DM4PR12MB5055.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20240507124305.2318-23-venkatkumar.ande@amd.com>
[AMD Official Use Only - AMD Internal Distribution Only]
Acked-by: Selwin Sebastian<selwin.sebastian@amd.com>
-----Original Message-----
From: Ande, Venkat Kumar <VenkatKumar.Ande@amd.com>
Sent: Tuesday, May 7, 2024 6:13 PM
To: dev@dpdk.org
Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Ande, Venkat Kumar <VenkatKumar.Ande@amd.com>; stable@dpdk.org
Subject: [PATCH v2 23/25] net/axgbe: fix the false linkup in axgbe PHY status
In the event of a change in AXGBE mode, the current auto-negotiation needs to be reset and the AN cycle needs to be re-triggered. However, the current code ignores the return value of axgbe_set_mode(), leading to false information as the link is declared without checking the status register.
Fix this by propagating the mode switch status information to axgbe_phy_status().
Fixes: 102b6ec3d5c3 ("net/axgbe: support auto-negotiation for 1Gbps")
Cc: stable@dpdk.org
Signed-off-by: Venkat Kumar Ande <venkatkumar.ande@amd.com>
---
drivers/net/axgbe/axgbe_mdio.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/axgbe/axgbe_mdio.c b/drivers/net/axgbe/axgbe_mdio.c index 9fe30e83bc..130a67479e 100644
--- a/drivers/net/axgbe/axgbe_mdio.c
+++ b/drivers/net/axgbe/axgbe_mdio.c
@@ -1028,7 +1028,7 @@ static enum axgbe_mode axgbe_phy_status_aneg(struct axgbe_port *pdata)
return pdata->phy_if.phy_impl.an_outcome(pdata);
}
-static void axgbe_phy_status_result(struct axgbe_port *pdata)
+static bool axgbe_phy_status_result(struct axgbe_port *pdata)
{
enum axgbe_mode mode;
@@ -1065,8 +1065,13 @@ static void axgbe_phy_status_result(struct axgbe_port *pdata)
pdata->phy.duplex = DUPLEX_FULL;
- if (axgbe_set_mode(pdata, mode) && pdata->an_again)
+ if (!axgbe_set_mode(pdata, mode))
+ return false;
+
+ if (pdata->an_again)
axgbe_phy_reconfig_aneg(pdata);
+
+ return true;
}
static int autoneg_time_out(unsigned long autoneg_start_time) @@ -1133,7 +1138,10 @@ static void axgbe_phy_status(struct axgbe_port *pdata)
return;
}
}
- axgbe_phy_status_result(pdata);
+
+ if (axgbe_phy_status_result(pdata))
+ return;
+
if (rte_bit_relaxed_get32(AXGBE_LINK_INIT, &pdata->dev_state))
rte_bit_relaxed_clear32(AXGBE_LINK_INIT,
&pdata->dev_state);
--
2.34.1
next prev parent reply other threads:[~2024-05-20 10:43 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240412125013.10498-1-VenkatKumar.Ande@amd.com>
2024-05-07 12:42 ` [PATCH v2 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Venkat Kumar Ande
2024-05-07 12:42 ` [PATCH v2 02/25] net/axgbe: reset link when the link never comes back Venkat Kumar Ande
2024-05-20 10:40 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 03/25] net/axgbe: fix fluctuations for 1G BELFUSE SFP Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 04/25] net/axgbe: update DMA coherency values Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 05/25] net/axgbe: disable interrupts during device removal Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 06/25] net/axgbe: yellow carp devices do not need rrc Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 07/25] net/axgbe: enable PLL control for fixed PHY modes only Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-20 11:25 ` Ferruh Yigit
2024-05-07 12:42 ` [PATCH v2 08/25] net/axgbe: fix the SFP codes check for DAC cables Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 09/25] net/axgbe: fix logic around active and passive cables Venkat Kumar Ande
2024-05-20 10:41 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 10/25] net/axgbe: check only the minimum speed for cables Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 11/25] net/axgbe: flow Tx Ctrl Registers are h/w version dependent Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 12/25] net/axgbe: delay AN timeout during KR training Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 13/25] net/axgbe: remove use of comm owned field Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 14/25] net/axgbe: remove field of SFP diagnostic support Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 15/25] net/axgbe: improve SFP 100Mbps auto-negotiation Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 16/25] net/axgbe: remove unnecessary conversion to bool Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 17/25] net/axgbe: use definitions for mailbox commands Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 18/25] net/axgbe: add support for 10 Mbps speed Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:42 ` [PATCH v2 19/25] net/axgbe: separate C22 and C45 transactions Venkat Kumar Ande
2024-05-20 10:42 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 20/25] net/axgbe: replace mii generic macro for c45 with AXGBE Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-20 11:25 ` Ferruh Yigit
2024-05-07 12:43 ` [PATCH v2 21/25] net/axgbe: add 2.5GbE support to 10G BaseT mode Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 22/25] net/axgbe: add support for Rx adaptation Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 23/25] net/axgbe: fix the false linkup in axgbe PHY status Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin [this message]
2024-05-20 11:25 ` Ferruh Yigit
2024-05-07 12:43 ` [PATCH v2 24/25] net/axgbe: extend 10Mbps support to MAC version 21H Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-07 12:43 ` [PATCH v2 25/25] net/axgbe: modify debug messages Venkat Kumar Ande
2024-05-20 10:43 ` Sebastian, Selwin
2024-05-20 10:40 ` [PATCH v2 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Sebastian, Selwin
2024-05-20 11:26 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM4PR12MB505531883CF40AA0A17BF60F8DE92@DM4PR12MB5055.namprd12.prod.outlook.com \
--to=selwin.sebastian@amd.com \
--cc=VenkatKumar.Ande@amd.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).