RE: [PATCH v2 07/25] net/axgbe: enable PLL control for fixed PHY modes only

["Sebastian, Selwin" <Selwin.Sebastian@amd.com>]

[AMD Official Use Only - AMD Internal Distribution Only]

Acked-by: Selwin Sebastian<selwin.sebastian@amd.com>

-----Original Message-----
From: Ande, Venkat Kumar <VenkatKumar.Ande@amd.com>
Sent: Tuesday, May 7, 2024 6:13 PM
To: dev@dpdk.org
Cc: Sebastian, Selwin <Selwin.Sebastian@amd.com>; Ande, Venkat Kumar <VenkatKumar.Ande@amd.com>; stable@dpdk.org
Subject: [PATCH v2 07/25] net/axgbe: enable PLL control for fixed PHY modes only

PLL control setting(RRC) is needed only in fixed PHY configuration to fix the peer-peer issues. Without the PLL control setting, the link up takes longer time in a fixed phy configuration.

Without the fix the user will not get the link come UP.

Driver implements SW RRC for Autoneg On configuration, hence PLL control setting (RRC) is not needed for AN On configuration, and can be skipped.

Also, PLL re-initialization is not needed for PHY Power Off and RRC commands. Otherwise, they lead to mailbox errors. Added the changes accordingly.

Fixes: 09b0a36cc7ae ("net/axgbe: toggle PLL settings during rate change")
Cc: stable@dpdk.org

Signed-off-by: Venkat Kumar Ande <venkatkumar.ande@amd.com>
---
 drivers/net/axgbe/axgbe_phy_impl.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index f51830f800..9c2ae7bba0 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -1228,6 +1228,10 @@ static void axgbe_phy_rx_reset(struct axgbe_port *pdata)

 static void axgbe_phy_pll_ctrl(struct axgbe_port *pdata, bool enable)  {
+       /* PLL_CTRL feature needs to be enabled for fixed PHY modes (Non-Autoneg) only */
+       if (pdata->phy.autoneg != AUTONEG_DISABLE)
+               return;
+
        XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
                        XGBE_PMA_PLL_CTRL_MASK,
                        enable ? XGBE_PMA_PLL_CTRL_SET
@@ -1272,8 +1276,10 @@ static void axgbe_phy_perform_ratechange(struct axgbe_port *pdata,
        axgbe_phy_rx_reset(pdata);

 reenable_pll:
-        /* Re-enable the PLL control */
-       axgbe_phy_pll_ctrl(pdata, true);
+       /* Enable PLL re-initialization, not needed for PHY Power Off and RRC cmds */
+       if (cmd != AXGBE_MB_CMD_POWER_OFF &&
+           cmd != AXGBE_MB_CMD_RRC)
+               axgbe_phy_pll_ctrl(pdata, true);

        PMD_DRV_LOG(NOTICE, "firmware mailbox command did not complete\n");  }
--
2.34.1