From: Rakesh Kudurumalla <rkudurumalla@marvell.com>
To: Sunil Kumar Kori <skori@marvell.com>,
Sunil Kumar Kori <skori@marvell.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: RE: [PATCH] doc: update command scope information
Date: Wed, 17 Jan 2024 10:58:29 +0000 [thread overview]
Message-ID: <DM4PR18MB4255B3FB75D1BE369780FA6FCF722@DM4PR18MB4255.namprd18.prod.outlook.com> (raw)
In-Reply-To: <20240108073415.1987009-1-skori@marvell.com>
[-- Attachment #1: Type: text/plain, Size: 23838 bytes --]
Acked-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
> -----Original Message-----
> From: skori@marvell.com <skori@marvell.com>
> Sent: Monday, January 8, 2024 1:04 PM
> To: Sunil Kumar Kori <skori@marvell.com>; Rakesh Kudurumalla
> <rkudurumalla@marvell.com>
> Cc: dev@dpdk.org
> Subject: [PATCH] doc: update command scope information
>
> From: Sunil Kumar Kori <skori@marvell.com>
>
> Set of CLI commands are classified into following types;
>
> - Commands which must be used in script only.
> - Commands which must be used via telnet session only.
> - Commands which can be used either in script or via telnet session.
>
> Rename "Dynamic" column to "Scope" to provide clear scope of commands.
>
> Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
> ---
> doc/guides/tools/graph.rst | 211 +++++++++++++++++++------------------
> 1 file changed, 108 insertions(+), 103 deletions(-)
>
> diff --git a/doc/guides/tools/graph.rst b/doc/guides/tools/graph.rst index
> 1855d12891..6c559afe35 100644
> --- a/doc/guides/tools/graph.rst
> +++ b/doc/guides/tools/graph.rst
> @@ -154,109 +154,114 @@ file to express the requested use case
> configuration.
> .. table:: Exposed CLIs
> :widths: auto
>
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | Command | Description | Dynamic |
> Optional |
> -
> +======================================+========================
> ===========+=========+==========+
> - | | graph <usecases> [bsz <size>] | | Command to express the desired |
> No | No |
> - | | [tmo <ns>] [coremask <bitmask>] | | use case. Also enables/disable |
> | |
> - | | model <rtc/mcd/default> pcap_enable| | pcap capturing. |
> | |
> - | | <0/1> num_pcap_pkts <num> pcap_file| | |
> |
> - | | <output_capture_file> | | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | graph start | | Command to start the graph. | No |
> No |
> - | | | This command triggers that no | | |
> - | | | more commands are left to be | | |
> - | | | parsed and graph initialization | | |
> - | | | can be started now. It must be | | |
> - | | | the last command in usecase.cli | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | graph stats show | | Command to dump current graph |
> Yes | Yes |
> - | | | statistics. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | help graph | | Command to dump graph help | Yes |
> Yes |
> - | | | message. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | mempool <mempool_name> size | | Command to create mempool
> which | No | No |
> - | | <mbuf_size> buffers | | will be further associated to | |
> |
> - | | <number_of_buffers> | | RxQ to dequeue the packets. |
> | |
> - | | cache <cache_size> numa <numa_id> | | |
> |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | help mempool | | Command to dump mempool help |
> Yes | Yes |
> - | | | message. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | ethdev <ethdev_name> rxq <n_queues>| | Command to create DPDK
> port with| No | No |
> - | | txq <n_queues> <mempool_name> | | given number of Rx and Tx
> queues| | |
> - | | | . Also attach RxQ with given | | |
> - | | | mempool. Each port can have | | |
> - | | | single mempool only i.e. all | | |
> - | | | RxQs will share the same mempool| | |
> - | | | . | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | ethdev <ethdev_name> mtu <mtu_sz> | | Command to configure MTU
> of DPDK| Yes | Yes |
> - | | | port. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | ethdev <ethdev_name> promiscuous | | Command to enable/disable
> | Yes | Yes |
> - | | <on/off> | | promiscuous mode on DPDK port. | |
> |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | ethdev <ethdev_name> show | | Command to dump current
> ethdev | Yes | Yes |
> - | | | configuration. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | ethdev <ethdev_name> stats | | Command to dump current ethdev
> | Yes | Yes |
> - | | | statistics. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | ethdev <ethdev_name> ip4 addr add | | Command to configure IPv4
> | Yes | Yes |
> - | | <ip> netmask <mask> | | address on given PCI device. It | |
> |
> - | | | is needed if user wishes to use | | |
> - | | | ``ipv4_lookup`` node. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | ethdev <ethdev_name> ip6 addr add | | Command to configure IPv6
> | Yes | Yes |
> - | | <ip> netmask <mask> | | address on given PCI device. It | |
> |
> - | | | is needed if user wishes to use | | |
> - | | | ``ipv6_lookup`` node. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | help ethdev | | Command to dump ethdev help | Yes |
> Yes |
> - | | | message. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | ipv4_lookup route add ipv4 <ip> | | Command to add a route into |
> Yes | Yes |
> - | | netmask <mask> via <ip> | | ``ipv4_lookup`` LPM table. It is|
> | |
> - | | | needed if user wishes to route | | |
> - | | | the packets based on LPM lookup | | |
> - | | | table. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | help ipv4_lookup | | Command to dump ``ipv4_lookup`` |
> Yes | Yes |
> - | | | help message. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | ipv6_lookup route add ipv6 <ip> | | Command to add a route into |
> Yes | Yes |
> - | | netmask <mask> via <ip> | | ``ipv6_lookup`` LPM table. It is|
> | |
> - | | | needed if user wishes to route | | |
> - | | | the packets based on LPM6 lookup| | |
> - | | | table. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | help ipv6_lookup | | Command to dump ``ipv6_lookup`` |
> Yes | Yes |
> - | | | help message. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | neigh add ipv4 <ip> <mac> | | Command to add a neighbour |
> Yes | Yes |
> - | | | information into | | |
> - | | | ``ipv4_rewrite`` node. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | neigh add ipv6 <ip> <mac> | | Command to add a neighbour |
> Yes | Yes |
> - | | | information into | | |
> - | | | ``ipv6_rewrite`` node. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | help neigh | | Command to dump neigh help | Yes |
> Yes |
> - | | | message. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | | ethdev_rx map port <ethdev_name> | | Command to add port-
> queue-core | No | No |
> - | | queue <q_num> core <core_id> | | mapping to ``ethdev_rx`` node.
> | | |
> - | | | ``ethdev_rx`` node instance will| | |
> - | | | be pinned on given core and will| | |
> - | | | poll on requested port/queue | | |
> - | | | pair. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> - | help ethdev_rx | | Command to dump ethdev_rx help | Yes
> | Yes |
> - | | | message. | | |
> - +--------------------------------------+-----------------------------------+---------+---------
> -+
> -
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | Command | Description | Scope |
> Optional |
> +
> +======================================+========================
> ===========+===================+==========+
> + | | graph <usecases> [bsz <size>] | | Command to express the desired
> | :ref:`1 <scopes>` | No |
> + | | [tmo <ns>] [coremask <bitmask>] | | use case. Also enables/disable
> | | |
> + | | model <rtc/mcd/default> pcap_enable| | pcap capturing. |
> | |
> + | | <0/1> num_pcap_pkts <num> pcap_file| |
> | |
> + | | <output_capture_file> | | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | graph start | | Command to start the graph. | :ref:`1
> <scopes>` | No |
> + | | | This command triggers that no | |
> |
> + | | | more commands are left to be | |
> |
> + | | | parsed and graph initialization | |
> |
> + | | | can be started now. It must be | |
> |
> + | | | the last command in usecase.cli | |
> |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | graph stats show | | Command to dump current graph |
> :ref:`2 <scopes>` | Yes |
> + | | | statistics. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | help graph | | Command to dump graph help | :ref:`2
> <scopes>` | Yes |
> + | | | message. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | mempool <mempool_name> size | | Command to create mempool
> which | :ref:`1 <scopes>` | No |
> + | | <mbuf_size> buffers | | will be further associated to |
> | |
> + | | <number_of_buffers> | | RxQ to dequeue the packets. |
> | |
> + | | cache <cache_size> numa <numa_id> | |
> | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | help mempool | | Command to dump mempool help |
> :ref:`2 <scopes>` | Yes |
> + | | | message. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | ethdev <ethdev_name> rxq <n_queues>| | Command to create DPDK
> port with| :ref:`1 <scopes>` | No |
> + | | txq <n_queues> <mempool_name> | | given number of Rx and Tx
> queues| | |
> + | | | . Also attach RxQ with given | | |
> + | | | mempool. Each port can have | |
> |
> + | | | single mempool only i.e. all | | |
> + | | | RxQs will share the same mempool| |
> |
> + | | | . | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | ethdev <ethdev_name> mtu <mtu_sz> | | Command to configure MTU
> of DPDK| :ref:`3 <scopes>` | Yes |
> + | | | port. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | ethdev <ethdev_name> promiscuous | | Command to enable/disable
> | :ref:`3 <scopes>` | Yes |
> + | | <on/off> | | promiscuous mode on DPDK port. |
> | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | ethdev <ethdev_name> show | | Command to dump current
> ethdev | :ref:`2 <scopes>` | Yes |
> + | | | configuration. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | ethdev <ethdev_name> stats | | Command to dump current
> ethdev | :ref:`2 <scopes>` | Yes |
> + | | | statistics. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | ethdev <ethdev_name> ip4 addr add | | Command to configure IPv4
> | :ref:`3 <scopes>` | Yes |
> + | | <ip> netmask <mask> | | address on given PCI device. It |
> | |
> + | | | is needed if user wishes to use | |
> |
> + | | | ``ipv4_lookup`` node. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | ethdev <ethdev_name> ip6 addr add | | Command to configure IPv6
> | :ref:`3 <scopes>` | Yes |
> + | | <ip> netmask <mask> | | address on given PCI device. It |
> | |
> + | | | is needed if user wishes to use | |
> |
> + | | | ``ipv6_lookup`` node. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | help ethdev | | Command to dump ethdev help | :ref:`2
> <scopes>` | Yes |
> + | | | message. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | ipv4_lookup route add ipv4 <ip> | | Command to add a route into
> | :ref:`3 <scopes>` | Yes |
> + | | netmask <mask> via <ip> | | ``ipv4_lookup`` LPM table. It is|
> | |
> + | | | needed if user wishes to route | |
> |
> + | | | the packets based on LPM lookup | |
> |
> + | | | table. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | help ipv4_lookup | | Command to dump ``ipv4_lookup`` |
> :ref:`2 <scopes>` | Yes |
> + | | | help message. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | ipv6_lookup route add ipv6 <ip> | | Command to add a route into
> | :ref:`3 <scopes>` | Yes |
> + | | netmask <mask> via <ip> | | ``ipv6_lookup`` LPM table. It is|
> | |
> + | | | needed if user wishes to route | |
> |
> + | | | the packets based on LPM6 lookup| |
> |
> + | | | table. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | help ipv6_lookup | | Command to dump ``ipv6_lookup`` |
> :ref:`2 <scopes>` | Yes |
> + | | | help message. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | neigh add ipv4 <ip> <mac> | | Command to add a neighbour |
> :ref:`3 <scopes>` | Yes |
> + | | | information into | | |
> + | | | ``ipv4_rewrite`` node. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | neigh add ipv6 <ip> <mac> | | Command to add a neighbour |
> :ref:`3 <scopes>` | Yes |
> + | | | information into | | |
> + | | | ``ipv6_rewrite`` node. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | help neigh | | Command to dump neigh help | :ref:`2
> <scopes>` | Yes |
> + | | | message. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | | ethdev_rx map port <ethdev_name> | | Command to add port-
> queue-core | :ref:`1 <scopes>` | No |
> + | | queue <q_num> core <core_id> | | mapping to ``ethdev_rx`` node.
> | | |
> + | | | ``ethdev_rx`` node instance will| |
> |
> + | | | be pinned on given core and will| |
> |
> + | | | poll on requested port/queue | |
> |
> + | | | pair. | | |
> + +--------------------------------------+-----------------------------------+-------------------
> +----------+
> + | help ethdev_rx | | Command to dump ethdev_rx help |
> :ref:`2 <scopes>` | Yes |
> + | | | message. | | |
> +
> + +--------------------------------------+------------------------------
> + -----+-------------------+----------+
> +
> +.. _scopes:
> +
> +1. Script only
> +2. Telnet only
> +3. Script and telnet both
>
> Runtime configuration
> ---------------------
> --
> 2.25.1
[-- Attachment #2: winmail.dat --]
[-- Type: application/ms-tnef, Size: 40822 bytes --]
next prev parent reply other threads:[~2024-01-17 10:58 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-08 7:34 skori
2024-01-17 10:58 ` Rakesh Kudurumalla [this message]
2024-03-07 10:06 ` [PATCH v2 1/1] " skori
2024-03-07 10:08 ` Sunil Kumar Kori
2024-03-21 17:06 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM4PR18MB4255B3FB75D1BE369780FA6FCF722@DM4PR18MB4255.namprd18.prod.outlook.com \
--to=rkudurumalla@marvell.com \
--cc=dev@dpdk.org \
--cc=skori@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).