* [dpdk-dev] Build DPDK for different target machine.
@ 2018-10-19 16:24 Shubhachint, Chaitanya
2018-10-20 5:06 ` Shyam Shrivastav
2018-10-22 7:58 ` Ferruh Yigit
0 siblings, 2 replies; 7+ messages in thread
From: Shubhachint, Chaitanya @ 2018-10-19 16:24 UTC (permalink / raw)
To: dev
Hello,
I am trying to build DPDK library set (shared) so that there are somewhat portable. I want to build them once on a designated build machine and run them on other machines of similar architecture. I can build DPDK and use it locally successfully but running them on a different target machine always gives me core dump with 'Illegal instruction'.
I am building with
make install T=x86_64-native-linuxapp-gcc
export RTE_TARGET=x86_64-native-linuxapp-gcc
and CONFIG_RTE_BUILD_SHARED_LIB=y
I have tried setting CONFIG_RTE_MACHINE, as "default" or "snb" but that does not help.
Help is much appreciated. Details of Build machine and target machine below:
Thanks
Chai.
Build machine:
DPDK_Build/dpdk-18.08# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 1
Core(s) per socket: 8
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 79
Model name: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz
Stepping: 1
CPU MHz: 2399.998
BogoMIPS: 4799.99
Hypervisor vendor: VMware
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 25600K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm rdseed adx smap xsaveopt dtherm ida arat pln pts
Target Machine:
$lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 6
On-line CPU(s) list: 0-5
Thread(s) per core: 1
Core(s) per socket: 6
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 45
Model name: Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
Stepping: 7
CPU MHz: 1682.069
CPU max MHz: 3500.0000
CPU min MHz: 1200.0000
BogoMIPS: 5785.61
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 15360K
NUMA node0 CPU(s): 0-5
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] Build DPDK for different target machine.
2018-10-19 16:24 [dpdk-dev] Build DPDK for different target machine Shubhachint, Chaitanya
@ 2018-10-20 5:06 ` Shyam Shrivastav
2018-10-22 15:50 ` Shubhachint, Chaitanya
2018-10-22 7:58 ` Ferruh Yigit
1 sibling, 1 reply; 7+ messages in thread
From: Shyam Shrivastav @ 2018-10-20 5:06 UTC (permalink / raw)
To: Chaitanya.Shubhachint; +Cc: dev
I am doing same but including dpdk libraries with application, you can do
same. Other thing to try, copy the shared libraries from the build machine
into targets instead of building them on targets.
On Fri, Oct 19, 2018 at 9:55 PM Shubhachint, Chaitanya <
Chaitanya.Shubhachint@netscout.com> wrote:
> Hello,
>
> I am trying to build DPDK library set (shared) so that there are somewhat
> portable. I want to build them once on a designated build machine and run
> them on other machines of similar architecture. I can build DPDK and use it
> locally successfully but running them on a different target machine always
> gives me core dump with 'Illegal instruction'.
>
> I am building with
> make install T=x86_64-native-linuxapp-gcc
> export RTE_TARGET=x86_64-native-linuxapp-gcc
> and CONFIG_RTE_BUILD_SHARED_LIB=y
>
> I have tried setting CONFIG_RTE_MACHINE, as "default" or "snb" but that
> does not help.
>
> Help is much appreciated. Details of Build machine and target machine
> below:
>
> Thanks
> Chai.
>
> Build machine:
> DPDK_Build/dpdk-18.08# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-7
> Thread(s) per core: 1
> Core(s) per socket: 8
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 79
> Model name: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz
> Stepping: 1
> CPU MHz: 2399.998
> BogoMIPS: 4799.99
> Hypervisor vendor: VMware
> Virtualization type: full
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 25600K
> NUMA node0 CPU(s): 0-7
> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx
> pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology
> tsc_reliable nonstop_tsc cpuid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid
> sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c
> rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single
> pti fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm rdseed adx smap
> xsaveopt dtherm ida arat pln pts
>
>
> Target Machine:
> $lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 6
> On-line CPU(s) list: 0-5
> Thread(s) per core: 1
> Core(s) per socket: 6
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 45
> Model name: Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
> Stepping: 7
> CPU MHz: 1682.069
> CPU max MHz: 3500.0000
> CPU min MHz: 1200.0000
> BogoMIPS: 5785.61
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 15360K
> NUMA node0 CPU(s): 0-5
> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
> syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good
> nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor
> ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic
> popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi
> flexpriority ept vpid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] Build DPDK for different target machine.
2018-10-19 16:24 [dpdk-dev] Build DPDK for different target machine Shubhachint, Chaitanya
2018-10-20 5:06 ` Shyam Shrivastav
@ 2018-10-22 7:58 ` Ferruh Yigit
2018-10-22 15:49 ` Shubhachint, Chaitanya
1 sibling, 1 reply; 7+ messages in thread
From: Ferruh Yigit @ 2018-10-22 7:58 UTC (permalink / raw)
To: Shubhachint, Chaitanya, dev
On 10/19/2018 5:24 PM, Shubhachint, Chaitanya wrote:
> Hello,
>
> I am trying to build DPDK library set (shared) so that there are somewhat portable. I want to build them once on a designated build machine and run them on other machines of similar architecture. I can build DPDK and use it locally successfully but running them on a different target machine always gives me core dump with 'Illegal instruction'.
>
> I am building with
> make install T=x86_64-native-linuxapp-gcc
> export RTE_TARGET=x86_64-native-linuxapp-gcc
> and CONFIG_RTE_BUILD_SHARED_LIB=y
>
> I have tried setting CONFIG_RTE_MACHINE, as "default" or "snb" but that does not help.
Hi Chai,
By "native" machine you can have the problem you mentioned but "default" should
solve the issue.
- Are you sure you are not overwriting your change in config, how do you set it?
- Is there any specific module/part of DPDK you are getting this error?
>
> Help is much appreciated. Details of Build machine and target machine below:
>
> Thanks
> Chai.
>
> Build machine:
> DPDK_Build/dpdk-18.08# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-7
> Thread(s) per core: 1
> Core(s) per socket: 8
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 79
> Model name: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz
> Stepping: 1
> CPU MHz: 2399.998
> BogoMIPS: 4799.99
> Hypervisor vendor: VMware
> Virtualization type: full
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 25600K
> NUMA node0 CPU(s): 0-7
> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm rdseed adx smap xsaveopt dtherm ida arat pln pts
>
>
> Target Machine:
> $lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 6
> On-line CPU(s) list: 0-5
> Thread(s) per core: 1
> Core(s) per socket: 6
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 45
> Model name: Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
> Stepping: 7
> CPU MHz: 1682.069
> CPU max MHz: 3500.0000
> CPU min MHz: 1200.0000
> BogoMIPS: 5785.61
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 15360K
> NUMA node0 CPU(s): 0-5
> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] Build DPDK for different target machine.
2018-10-22 7:58 ` Ferruh Yigit
@ 2018-10-22 15:49 ` Shubhachint, Chaitanya
2018-10-22 16:11 ` Ferruh Yigit
0 siblings, 1 reply; 7+ messages in thread
From: Shubhachint, Chaitanya @ 2018-10-22 15:49 UTC (permalink / raw)
To: Ferruh Yigit, dev
Hello,
My objective is to build a shared dpdk library on a build machine and copy it over to target machine of similar hardware specs.
I am building with steps below:
1. untar dpdk source.
2. modify config/common_base as =>
CONFIG_RTE_BUILD_SHARED_LIB=y
CONFIG_RTE_MACHINE=“default”
3. make config T=x86_64-native-linuxapp-gcc export
4. make install T=x86_64-native-linuxapp-gcc export
Looks like step 2 is successful in changing the build to shared-library but there is no effect of setting CONFIG_RTE_MACHINE=“default”. I see no change in any of the header files or resultant binary files.
What am I missing?
Thanks
Chai.
-----Original Message-----
From: Ferruh Yigit <ferruh.yigit@intel.com>
Sent: Monday, October 22, 2018 02:58 AM
To: Shubhachint, Chaitanya <Chaitanya.Shubhachint@netscout.com>; dev@dpdk.org
Subject: Re: [dpdk-dev] Build DPDK for different target machine.
[EXTERNAL EMAIL]
On 10/19/2018 5:24 PM, Shubhachint, Chaitanya wrote:
> Hello,
>
> I am trying to build DPDK library set (shared) so that there are somewhat portable. I want to build them once on a designated build machine and run them on other machines of similar architecture. I can build DPDK and use it locally successfully but running them on a different target machine always gives me core dump with 'Illegal instruction'.
>
> I am building with
> make install T=x86_64-native-linuxapp-gcc export
> RTE_TARGET=x86_64-native-linuxapp-gcc
> and CONFIG_RTE_BUILD_SHARED_LIB=y
>
> I have tried setting CONFIG_RTE_MACHINE, as "default" or "snb" but that does not help.
Hi Chai,
By "native" machine you can have the problem you mentioned but "default" should solve the issue.
- Are you sure you are not overwriting your change in config, how do you set it?
- Is there any specific module/part of DPDK you are getting this error?
>
> Help is much appreciated. Details of Build machine and target machine below:
>
> Thanks
> Chai.
>
> Build machine:
> DPDK_Build/dpdk-18.08# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-7
> Thread(s) per core: 1
> Core(s) per socket: 8
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 79
> Model name: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz
> Stepping: 1
> CPU MHz: 2399.998
> BogoMIPS: 4799.99
> Hypervisor vendor: VMware
> Virtualization type: full
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 25600K
> NUMA node0 CPU(s): 0-7
> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm rdseed adx smap xsaveopt dtherm ida arat pln pts
>
>
> Target Machine:
> $lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 6
> On-line CPU(s) list: 0-5
> Thread(s) per core: 1
> Core(s) per socket: 6
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 45
> Model name: Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
> Stepping: 7
> CPU MHz: 1682.069
> CPU max MHz: 3500.0000
> CPU min MHz: 1200.0000
> BogoMIPS: 5785.61
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 15360K
> NUMA node0 CPU(s): 0-5
> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] Build DPDK for different target machine.
2018-10-20 5:06 ` Shyam Shrivastav
@ 2018-10-22 15:50 ` Shubhachint, Chaitanya
0 siblings, 0 replies; 7+ messages in thread
From: Shubhachint, Chaitanya @ 2018-10-22 15:50 UTC (permalink / raw)
To: Shyam Shrivastav; +Cc: dev
Yes, that is exactly what am I trying to do. Build on a designated build machine, copy dpdk libs over to target machine and use them. Upon usage I get the 'Illegal instruction' error.
From: Shyam Shrivastav <shrivastav.shyam@gmail.com>
Sent: Saturday, October 20, 2018 12:07 AM
To: Shubhachint, Chaitanya <Chaitanya.Shubhachint@netscout.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] Build DPDK for different target machine.
[EXTERNAL EMAIL]
I am doing same but including dpdk libraries with application, you can do same. Other thing to try, copy the shared libraries from the build machine into targets instead of building them on targets.
On Fri, Oct 19, 2018 at 9:55 PM Shubhachint, Chaitanya <Chaitanya.Shubhachint@netscout.com<mailto:Chaitanya.Shubhachint@netscout.com>> wrote:
Hello,
I am trying to build DPDK library set (shared) so that there are somewhat portable. I want to build them once on a designated build machine and run them on other machines of similar architecture. I can build DPDK and use it locally successfully but running them on a different target machine always gives me core dump with 'Illegal instruction'.
I am building with
make install T=x86_64-native-linuxapp-gcc
export RTE_TARGET=x86_64-native-linuxapp-gcc
and CONFIG_RTE_BUILD_SHARED_LIB=y
I have tried setting CONFIG_RTE_MACHINE, as "default" or "snb" but that does not help.
Help is much appreciated. Details of Build machine and target machine below:
Thanks
Chai.
Build machine:
DPDK_Build/dpdk-18.08# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 1
Core(s) per socket: 8
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 79
Model name: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz
Stepping: 1
CPU MHz: 2399.998
BogoMIPS: 4799.99
Hypervisor vendor: VMware
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 25600K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm rdseed adx smap xsaveopt dtherm ida arat pln pts
Target Machine:
$lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 6
On-line CPU(s) list: 0-5
Thread(s) per core: 1
Core(s) per socket: 6
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 45
Model name: Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
Stepping: 7
CPU MHz: 1682.069
CPU max MHz: 3500.0000
CPU min MHz: 1200.0000
BogoMIPS: 5785.61
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 15360K
NUMA node0 CPU(s): 0-5
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] Build DPDK for different target machine.
2018-10-22 15:49 ` Shubhachint, Chaitanya
@ 2018-10-22 16:11 ` Ferruh Yigit
2018-10-22 18:56 ` Shubhachint, Chaitanya
0 siblings, 1 reply; 7+ messages in thread
From: Ferruh Yigit @ 2018-10-22 16:11 UTC (permalink / raw)
To: Shubhachint, Chaitanya, dev
On 10/22/2018 4:49 PM, Shubhachint, Chaitanya wrote:
> Hello,
>
> My objective is to build a shared dpdk library on a build machine and copy it over to target machine of similar hardware specs.
> I am building with steps below:
> 1. untar dpdk source.
> 2. modify config/common_base as =>
> CONFIG_RTE_BUILD_SHARED_LIB=y
> CONFIG_RTE_MACHINE=“default”
> 3. make config T=x86_64-native-linuxapp-gcc export
> 4. make install T=x86_64-native-linuxapp-gcc export
>
> Looks like step 2 is successful in changing the build to shared-library but there is no effect of setting CONFIG_RTE_MACHINE=“default”. I see no change in any of the header files or resultant binary files.
> What am I missing?
I think problem is overwriting your setting when selecting doing step 3 & 4.
After above steps can you please check your generated config file
(x86_64-native-linuxapp-gcc/.config) for the CONFIG_RTE_MACHINE value?
What you can do is,
- do above steps
- edit "x86_64-native-linuxapp-gcc/.config", update CONFIG_RTE_MACHINE as "default"
- rebuild, "make install T=x86_64-native-linuxapp-gcc"
You can verify that this is working by enable vebose during build, with V=1:
- make install T=x86_64-native-linuxapp-gcc V=1
And during compilations verify following flag exists; "-march=corei7"
Another problem, unrelated, in your step 3 above a config file created under
"./build/.config" but you are not using it, step 4 again creates a new config
file under "x86_64-native-linuxapp-gcc/.config"
You can do either:
- make T=x86_64-native-linuxapp-gcc config
- make
output will be under ./build/
- To install libraries into system folders: "make install"
OR
- make T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc config
- make O=x86_64-native-linuxapp-gcc
output will be under ./x86_64-native-linuxapp-gcc/
- To install libraries into system folders: "make O=x86_64-native-linuxapp-gcc
install"
briefly if you omit "O=" it uses "build" by default.
> Thanks
> Chai.
>
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@intel.com>
> Sent: Monday, October 22, 2018 02:58 AM
> To: Shubhachint, Chaitanya <Chaitanya.Shubhachint@netscout.com>; dev@dpdk.org
> Subject: Re: [dpdk-dev] Build DPDK for different target machine.
>
> [EXTERNAL EMAIL]
>
> On 10/19/2018 5:24 PM, Shubhachint, Chaitanya wrote:
>> Hello,
>>
>> I am trying to build DPDK library set (shared) so that there are somewhat portable. I want to build them once on a designated build machine and run them on other machines of similar architecture. I can build DPDK and use it locally successfully but running them on a different target machine always gives me core dump with 'Illegal instruction'.
>>
>> I am building with
>> make install T=x86_64-native-linuxapp-gcc export
>> RTE_TARGET=x86_64-native-linuxapp-gcc
>> and CONFIG_RTE_BUILD_SHARED_LIB=y
>>
>> I have tried setting CONFIG_RTE_MACHINE, as "default" or "snb" but that does not help.
>
> Hi Chai,
>
> By "native" machine you can have the problem you mentioned but "default" should solve the issue.
> - Are you sure you are not overwriting your change in config, how do you set it?
> - Is there any specific module/part of DPDK you are getting this error?
>
>>
>> Help is much appreciated. Details of Build machine and target machine below:
>>
>> Thanks
>> Chai.
>>
>> Build machine:
>> DPDK_Build/dpdk-18.08# lscpu
>> Architecture: x86_64
>> CPU op-mode(s): 32-bit, 64-bit
>> Byte Order: Little Endian
>> CPU(s): 8
>> On-line CPU(s) list: 0-7
>> Thread(s) per core: 1
>> Core(s) per socket: 8
>> Socket(s): 1
>> NUMA node(s): 1
>> Vendor ID: GenuineIntel
>> CPU family: 6
>> Model: 79
>> Model name: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz
>> Stepping: 1
>> CPU MHz: 2399.998
>> BogoMIPS: 4799.99
>> Hypervisor vendor: VMware
>> Virtualization type: full
>> L1d cache: 32K
>> L1i cache: 32K
>> L2 cache: 256K
>> L3 cache: 25600K
>> NUMA node0 CPU(s): 0-7
>> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm rdseed adx smap xsaveopt dtherm ida arat pln pts
>>
>>
>> Target Machine:
>> $lscpu
>> Architecture: x86_64
>> CPU op-mode(s): 32-bit, 64-bit
>> Byte Order: Little Endian
>> CPU(s): 6
>> On-line CPU(s) list: 0-5
>> Thread(s) per core: 1
>> Core(s) per socket: 6
>> Socket(s): 1
>> NUMA node(s): 1
>> Vendor ID: GenuineIntel
>> CPU family: 6
>> Model: 45
>> Model name: Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
>> Stepping: 7
>> CPU MHz: 1682.069
>> CPU max MHz: 3500.0000
>> CPU min MHz: 1200.0000
>> BogoMIPS: 5785.61
>> Virtualization: VT-x
>> L1d cache: 32K
>> L1i cache: 32K
>> L2 cache: 256K
>> L3 cache: 15360K
>> NUMA node0 CPU(s): 0-5
>> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] Build DPDK for different target machine.
2018-10-22 16:11 ` Ferruh Yigit
@ 2018-10-22 18:56 ` Shubhachint, Chaitanya
0 siblings, 0 replies; 7+ messages in thread
From: Shubhachint, Chaitanya @ 2018-10-22 18:56 UTC (permalink / raw)
To: Ferruh Yigit, dev
Hello Ferruh,
Thanks for all your help.
Yes, the x86_64-native-linuxapp-gcc/.config still had the 'native' setup. I was doing the 'make config' with the hope that it would set up all the required config files but that didn't work. Modifying x86_64-native-linuxapp-gcc/.config and building works. Now I can build one machine as use it on another.
Thanks again.
Chai.
-----Original Message-----
From: Ferruh Yigit <ferruh.yigit@intel.com>
Sent: Monday, October 22, 2018 11:12 AM
To: Shubhachint, Chaitanya <Chaitanya.Shubhachint@netscout.com>; dev@dpdk.org
Subject: Re: [dpdk-dev] Build DPDK for different target machine.
[EXTERNAL EMAIL]
On 10/22/2018 4:49 PM, Shubhachint, Chaitanya wrote:
> Hello,
>
> My objective is to build a shared dpdk library on a build machine and copy it over to target machine of similar hardware specs.
> I am building with steps below:
> 1. untar dpdk source.
> 2. modify config/common_base as =>
> CONFIG_RTE_BUILD_SHARED_LIB=y
> CONFIG_RTE_MACHINE=“default”
> 3. make config T=x86_64-native-linuxapp-gcc export 4. make install
> T=x86_64-native-linuxapp-gcc export
>
> Looks like step 2 is successful in changing the build to shared-library but there is no effect of setting CONFIG_RTE_MACHINE=“default”. I see no change in any of the header files or resultant binary files.
> What am I missing?
I think problem is overwriting your setting when selecting doing step 3 & 4.
After above steps can you please check your generated config file
(x86_64-native-linuxapp-gcc/.config) for the CONFIG_RTE_MACHINE value?
What you can do is,
- do above steps
- edit "x86_64-native-linuxapp-gcc/.config", update CONFIG_RTE_MACHINE as "default"
- rebuild, "make install T=x86_64-native-linuxapp-gcc"
You can verify that this is working by enable vebose during build, with V=1:
- make install T=x86_64-native-linuxapp-gcc V=1 And during compilations verify following flag exists; "-march=corei7"
Another problem, unrelated, in your step 3 above a config file created under "./build/.config" but you are not using it, step 4 again creates a new config file under "x86_64-native-linuxapp-gcc/.config"
You can do either:
- make T=x86_64-native-linuxapp-gcc config
- make
output will be under ./build/
- To install libraries into system folders: "make install"
OR
- make T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc config
- make O=x86_64-native-linuxapp-gcc
output will be under ./x86_64-native-linuxapp-gcc/
- To install libraries into system folders: "make O=x86_64-native-linuxapp-gcc install"
briefly if you omit "O=" it uses "build" by default.
> Thanks
> Chai.
>
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit@intel.com>
> Sent: Monday, October 22, 2018 02:58 AM
> To: Shubhachint, Chaitanya <Chaitanya.Shubhachint@netscout.com>;
> dev@dpdk.org
> Subject: Re: [dpdk-dev] Build DPDK for different target machine.
>
> [EXTERNAL EMAIL]
>
> On 10/19/2018 5:24 PM, Shubhachint, Chaitanya wrote:
>> Hello,
>>
>> I am trying to build DPDK library set (shared) so that there are somewhat portable. I want to build them once on a designated build machine and run them on other machines of similar architecture. I can build DPDK and use it locally successfully but running them on a different target machine always gives me core dump with 'Illegal instruction'.
>>
>> I am building with
>> make install T=x86_64-native-linuxapp-gcc export
>> RTE_TARGET=x86_64-native-linuxapp-gcc
>> and CONFIG_RTE_BUILD_SHARED_LIB=y
>>
>> I have tried setting CONFIG_RTE_MACHINE, as "default" or "snb" but that does not help.
>
> Hi Chai,
>
> By "native" machine you can have the problem you mentioned but "default" should solve the issue.
> - Are you sure you are not overwriting your change in config, how do you set it?
> - Is there any specific module/part of DPDK you are getting this error?
>
>>
>> Help is much appreciated. Details of Build machine and target machine below:
>>
>> Thanks
>> Chai.
>>
>> Build machine:
>> DPDK_Build/dpdk-18.08# lscpu
>> Architecture: x86_64
>> CPU op-mode(s): 32-bit, 64-bit
>> Byte Order: Little Endian
>> CPU(s): 8
>> On-line CPU(s) list: 0-7
>> Thread(s) per core: 1
>> Core(s) per socket: 8
>> Socket(s): 1
>> NUMA node(s): 1
>> Vendor ID: GenuineIntel
>> CPU family: 6
>> Model: 79
>> Model name: Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz
>> Stepping: 1
>> CPU MHz: 2399.998
>> BogoMIPS: 4799.99
>> Hypervisor vendor: VMware
>> Virtualization type: full
>> L1d cache: 32K
>> L1i cache: 32K
>> L2 cache: 256K
>> L3 cache: 25600K
>> NUMA node0 CPU(s): 0-7
>> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 invpcid rtm rdseed adx smap xsaveopt dtherm ida arat pln pts
>>
>>
>> Target Machine:
>> $lscpu
>> Architecture: x86_64
>> CPU op-mode(s): 32-bit, 64-bit
>> Byte Order: Little Endian
>> CPU(s): 6
>> On-line CPU(s) list: 0-5
>> Thread(s) per core: 1
>> Core(s) per socket: 6
>> Socket(s): 1
>> NUMA node(s): 1
>> Vendor ID: GenuineIntel
>> CPU family: 6
>> Model: 45
>> Model name: Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz
>> Stepping: 7
>> CPU MHz: 1682.069
>> CPU max MHz: 3500.0000
>> CPU min MHz: 1200.0000
>> BogoMIPS: 5785.61
>> Virtualization: VT-x
>> L1d cache: 32K
>> L1i cache: 32K
>> L2 cache: 256K
>> L3 cache: 15360K
>> NUMA node0 CPU(s): 0-5
>> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt ibpb ibrs stibp dtherm ida arat pln pts
>>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-10-22 18:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-19 16:24 [dpdk-dev] Build DPDK for different target machine Shubhachint, Chaitanya
2018-10-20 5:06 ` Shyam Shrivastav
2018-10-22 15:50 ` Shubhachint, Chaitanya
2018-10-22 7:58 ` Ferruh Yigit
2018-10-22 15:49 ` Shubhachint, Chaitanya
2018-10-22 16:11 ` Ferruh Yigit
2018-10-22 18:56 ` Shubhachint, Chaitanya
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).