* [dpdk-dev] API in dpdk to get total free physical memory
@ 2017-10-05 5:56 Venumadhav Josyula
2017-10-05 9:02 ` Burakov, Anatoly
0 siblings, 1 reply; 6+ messages in thread
From: Venumadhav Josyula @ 2017-10-05 5:56 UTC (permalink / raw)
To: dev; +Cc: Venumadhav Josyula
Hi All,
Like 'rte_eal_get_physmem_size' api to the total size of the physical memory. Is there an API to get to get total free memory physical memory available ?
We want such API we are planning to implement such API for the same
/* get the total size of memory */
uint64_t
rte_eal_get_physmem_free(int socket_id)
{
const struct rte_mem_config *mcfg;
unsigned i = 0;
uint64_t total_len = 0;
/* get pointer to global configuration */
mcfg = rte_eal_get_configuration()->mem_config;
for (i=0; i<RTE_MAX_MEMSEG; i++) {
if (mcfg->free_memseg[i].addr == NULL)
break;
if (mcfg->free_memseg[i].len == 0)
continue;
/* bad socket ID */
if (socket_id != SOCKET_ID_ANY &&
mcfg->free_memseg[i].socket_id != SOCKET_ID_ANY &&
socket_id != mcfg->free_memseg[i].socket_id)
continue;
total_len += mcfg->free_memseg[i].len;
}
return total_len;
}
Thanks,
Regards
Venu
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] API in dpdk to get total free physical memory 2017-10-05 5:56 [dpdk-dev] API in dpdk to get total free physical memory Venumadhav Josyula @ 2017-10-05 9:02 ` Burakov, Anatoly 0 siblings, 0 replies; 6+ messages in thread From: Burakov, Anatoly @ 2017-10-05 9:02 UTC (permalink / raw) To: Venumadhav Josyula, dev On 05-Oct-17 6:56 AM, Venumadhav Josyula wrote: > Hi All, > > Like 'rte_eal_get_physmem_size' api to the total size of the physical memory. Is there an API to get to get total free memory physical memory available ? > > We want such API we are planning to implement such API for the same > > /* get the total size of memory */ > uint64_t > rte_eal_get_physmem_free(int socket_id) > { > const struct rte_mem_config *mcfg; > unsigned i = 0; > uint64_t total_len = 0; > > /* get pointer to global configuration */ > mcfg = rte_eal_get_configuration()->mem_config; > > for (i=0; i<RTE_MAX_MEMSEG; i++) { > if (mcfg->free_memseg[i].addr == NULL) > break; > > if (mcfg->free_memseg[i].len == 0) > continue; > > /* bad socket ID */ > if (socket_id != SOCKET_ID_ANY && > mcfg->free_memseg[i].socket_id != SOCKET_ID_ANY && > socket_id != mcfg->free_memseg[i].socket_id) > continue; > > total_len += mcfg->free_memseg[i].len; > } > > return total_len; > } > > Thanks, > Regards > Venu > Hi Venu, I don't think there is such an API, so you're welcome to submit a patch. -- Thanks, Anatoly ^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] Api in dpdk to get total free physical memory
@ 2018-03-08 21:36 Venumadhav Josyula
2018-03-09 9:05 ` Burakov, Anatoly
0 siblings, 1 reply; 6+ messages in thread
From: Venumadhav Josyula @ 2018-03-08 21:36 UTC (permalink / raw)
To: dev
Hi All,
Like ‘rte_eal_get_physmem_size’ api to the total size of the physical
memory. Is there an API to get to get total free memory physical memory
available ?
We want such API we are planning to implement such API for the same
/* get the total size of memory */
uint64_t
rte_eal_get_physmem_free(int socket_id)
{
const struct rte_mem_config *mcfg;
unsigned i = 0;
uint64_t total_len = 0;
/* get pointer to global configuration */
mcfg = rte_eal_get_configuration()->mem_config;
for (i=0; i<RTE_MAX_MEMSEG; i++) {
if (mcfg->free_memseg[i].addr == NULL)
break;
if (mcfg->free_memseg[i].len == 0)
continue;
/* bad socket ID */
if (socket_id != SOCKET_ID_ANY &&
mcfg->free_memseg[i].socket_id != SOCKET_ID_ANY &&
socket_id != mcfg->free_memseg[i].socket_id)
continue;
total_len += mcfg->free_memseg[i].len;
}
return total_len;
}
Thanks,
Regards
Venu
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] Api in dpdk to get total free physical memory 2018-03-08 21:36 [dpdk-dev] Api " Venumadhav Josyula @ 2018-03-09 9:05 ` Burakov, Anatoly 2018-03-09 9:59 ` Venumadhav Josyula 0 siblings, 1 reply; 6+ messages in thread From: Burakov, Anatoly @ 2018-03-09 9:05 UTC (permalink / raw) To: Venumadhav Josyula, dev On 08-Mar-18 9:36 PM, Venumadhav Josyula wrote: > Hi All, > > > > Like ‘rte_eal_get_physmem_size’ api to the total size of the physical > memory. Is there an API to get to get total free memory physical memory > available ? > > > > We want such API we are planning to implement such API for the same > > > > /* get the total size of memory */ > > uint64_t > > rte_eal_get_physmem_free(int socket_id) > > { > > const struct rte_mem_config *mcfg; > > unsigned i = 0; > > uint64_t total_len = 0; > > > > /* get pointer to global configuration */ > > mcfg = rte_eal_get_configuration()->mem_config; > > > > for (i=0; i<RTE_MAX_MEMSEG; i++) { > > if (mcfg->free_memseg[i].addr == NULL) > > break; > > > > if (mcfg->free_memseg[i].len == 0) > > continue; > > > > /* bad socket ID */ > > if (socket_id != SOCKET_ID_ANY && > > mcfg->free_memseg[i].socket_id != SOCKET_ID_ANY && > > socket_id != mcfg->free_memseg[i].socket_id) > > continue; > > > > total_len += mcfg->free_memseg[i].len; > > } > > > > return total_len; > > } > > > > Thanks, > > Regards > > Venu > All memory is registered on the heap, so you might want to look at heap stats to get the same information :) It would also arguably be more useful because just the size of memory will not tell you how much you can allocate, because memory may be heavily fragmented, and heap stats will also tell you biggest free memory block size. Bear in mind, however, that there is work in progress [1] to enable mapping/unmapping hugepages at runtime, which would make such an API more or less useless - just because you don't have much free space *now* doesn't mean you can't allocate more :) [1] http://dpdk.org/ml/archives/dev/2018-March/092070.html -- Thanks, Anatoly ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Api in dpdk to get total free physical memory 2018-03-09 9:05 ` Burakov, Anatoly @ 2018-03-09 9:59 ` Venumadhav Josyula 2018-03-09 10:56 ` Burakov, Anatoly 0 siblings, 1 reply; 6+ messages in thread From: Venumadhav Josyula @ 2018-03-09 9:59 UTC (permalink / raw) To: Burakov, Anatoly, Venumadhav Josyula, dev [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 2789 bytes --] Hi Anatoly, Like we have api, rte_eal_get_physmem_size, which returns the total memory physical Ram memory. This is eal_common_memory.c, we need following following which would return free memory. For that that I was referring we need to api get the free physical ram memory ‘rte_eal_get_physmem_free’ for the we wanted to submit patch. Thanks, Regards Venumadhav From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Burakov, Anatoly Sent: Friday, March 09, 2018 2:36 PM To: Venumadhav Josyula <vjosyula@gmail.com>; dev@dpdk.org Subject: Re: [dpdk-dev] Api in dpdk to get total free physical memory On 08-Mar-18 9:36 PM, Venumadhav Josyula wrote: > Hi All, > > > > Like ‘rte_eal_get_physmem_size’ api to the total size of the physical > memory. Is there an API to get to get total free memory physical memory > available ? > > > > We want such API we are planning to implement such API for the same > > > > /* get the total size of memory */ > > uint64_t > > rte_eal_get_physmem_free(int socket_id) > > { > > const struct rte_mem_config *mcfg; > > unsigned i = 0; > > uint64_t total_len = 0; > > > > /* get pointer to global configuration */ > > mcfg = rte_eal_get_configuration()->mem_config; > > > > for (i=0; i<RTE_MAX_MEMSEG; i++) { > > if (mcfg->free_memseg[i].addr == NULL) > > break; > > > > if (mcfg->free_memseg[i].len == 0) > > continue; > > > > /* bad socket ID */ > > if (socket_id != SOCKET_ID_ANY && > > mcfg->free_memseg[i].socket_id != SOCKET_ID_ANY && > > socket_id != mcfg->free_memseg[i].socket_id) > > continue; > > > > total_len += mcfg->free_memseg[i].len; > > } > > > > return total_len; > > } > > > > Thanks, > > Regards > > Venu > All memory is registered on the heap, so you might want to look at heap stats to get the same information :) It would also arguably be more useful because just the size of memory will not tell you how much you can allocate, because memory may be heavily fragmented, and heap stats will also tell you biggest free memory block size. Bear in mind, however, that there is work in progress [1] to enable mapping/unmapping hugepages at runtime, which would make such an API more or less useless - just because you don't have much free space *now* doesn't mean you can't allocate more :) [1] http://dpdk.org/ml/archives/dev/2018-March/092070.html<http://dpdk.org/ml/archives/dev/2018-March/092070.html> -- Thanks, Anatoly \x16º&}êëº\x1c¢‚+bž×¥r‰…®#\x1a¯ÝuÓvÛM|Eën®sÚ¶\x17Þ®»¡Ê("¶)ízW(™\x17œz+Þuúèšh\x1aÓh§µé\¢i kM¢ž×¥r‰µßwã]úÛFòv—d¢¸\x0f¢Ë_‹\x1c"¶\x11\x1213âw]ÅóÎEÜ7èׯv—d¢¸\x05®/Lj½´×ÍuÓuûMtÐ!\x13\ ©Eë.–ÔŠ óÄ\x0ez\x1a¶Öœ†g§¶)æzË\x1aåÀš‘b•å)–†yÑZ–Ç‘yÇ¢½ç_®‰¨®É kM8ø§µé\¢mtïm=ßÆò¢»&tÖ7âž×¥r‰°ŠØDHÄÏý2Òü1ÄE \0\x11-¹è`ŒHp7ó=1ªöÓ_4ÛNuÓO4Ñq1´º(§]W"º'>Ší\x01Q ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] Api in dpdk to get total free physical memory 2018-03-09 9:59 ` Venumadhav Josyula @ 2018-03-09 10:56 ` Burakov, Anatoly 0 siblings, 0 replies; 6+ messages in thread From: Burakov, Anatoly @ 2018-03-09 10:56 UTC (permalink / raw) To: Venumadhav Josyula, Venumadhav Josyula, dev On 09-Mar-18 9:59 AM, Venumadhav Josyula wrote: > Hi Anatoly, > > Like we have api, rte_eal_get_physmem_size, which returns the total > memory physical Ram memory. This is eal_common_memory.c, we need > following following which would return free memory. For that that I was > referring we need to api get the free physical ram memory > ‘rte_eal_get_physmem_free’ for the we wanted to submit patch. > > Thanks, > > Regards > > Venumadhav Hi Venumadhav, Yes, i understand what you're referring to. I'm just saying that 1) getting malloc heap stats will provide you with similar (and arguably more practically useful) information, and 2) there are changes (hopefully) coming that will lessen usefulness of such an API because it would be possible to allocate hugepages at runtime, instead of preallocating them at startup. You're welcome to submit your patches, of course, but i would question the usefulness of such an API in light of coming changes to memory subsystem, because the "free" memory will not be the actual amount of free memory you have. Imagine the following: // you have roughly 1MB of free memory free_mem = rte_eal_get_free_mem(); printf("%luMB\n", free_mem >> 20); // prints "1MB" rte_malloc(1 << 20); // allocate 1MB of memory // causes allocation of 1G page free_mem = rte_eal_get_free_mem(); printf("%luMB\n", free_mem >> 20); // prints "1024MB" A second ago you had 1MB of "free space", next second you have 1G free space, despite the fact that you didn't free any memory - you just allocated more pages. "Amount of free space" will have little meaning when you can allocate more pages on the fly. I hope i've explained it clearly enough. > > *From:*dev [mailto:dev-bounces@dpdk.org] *On Behalf Of *Burakov, Anatoly > *Sent:* Friday, March 09, 2018 2:36 PM > *To:* Venumadhav Josyula <vjosyula@gmail.com>; dev@dpdk.org > *Subject:* Re: [dpdk-dev] Api in dpdk to get total free physical memory > > On 08-Mar-18 9:36 PM, Venumadhav Josyula wrote: > > Hi All, > > > > > > > > Like ‘rte_eal_get_physmem_size’ api to the total size of the physical > > memory. Is there an API to get to get total free memory physical memory > > available ? > > > > > > > > We want such API we are planning to implement such API for the same > > > > > > > > /* get the total size of memory */ > > > > uint64_t > > > > rte_eal_get_physmem_free(int socket_id) > > > > { > > > > const struct rte_mem_config *mcfg; > > > > unsigned i = 0; > > > > uint64_t total_len = 0; > > > > > > > > /* get pointer to global configuration */ > > > > mcfg = rte_eal_get_configuration()->mem_config; > > > > > > > > for (i=0; i<RTE_MAX_MEMSEG; i++) { > > > > if (mcfg->free_memseg[i].addr == NULL) > > > > break; > > > > > > > > if (mcfg->free_memseg[i].len == 0) > > > > continue; > > > > > > > > /* bad socket ID */ > > > > if (socket_id != SOCKET_ID_ANY && > > > > mcfg->free_memseg[i].socket_id != SOCKET_ID_ANY && > > > > socket_id != mcfg->free_memseg[i].socket_id) > > > > continue; > > > > > > > > total_len += mcfg->free_memseg[i].len; > > > > } > > > > > > > > return total_len; > > > > } > > > > > > > > Thanks, > > > > Regards > > > > Venu > > > > All memory is registered on the heap, so you might want to look at heap > stats to get the same information :) It would also arguably be more > useful because just the size of memory will not tell you how much you > can allocate, because memory may be heavily fragmented, and heap stats > will also tell you biggest free memory block size. > > Bear in mind, however, that there is work in progress [1] to enable > mapping/unmapping hugepages at runtime, which would make such an API > more or less useless - just because you don't have much free space *now* > doesn't mean you can't allocate more :) > > [1] http://dpdk.org/ml/archives/dev/2018-March/092070.html > > -- > Thanks, > Anatoly > -- Thanks, Anatoly ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-03-09 10:56 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-10-05 5:56 [dpdk-dev] API in dpdk to get total free physical memory Venumadhav Josyula 2017-10-05 9:02 ` Burakov, Anatoly 2018-03-08 21:36 [dpdk-dev] Api " Venumadhav Josyula 2018-03-09 9:05 ` Burakov, Anatoly 2018-03-09 9:59 ` Venumadhav Josyula 2018-03-09 10:56 ` Burakov, Anatoly
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).