From: "Kumar, Ravi1" <Ravi1.Kumar@amd.com>
To: "Somalapuram, Amaranath" <Amaranath.Somalapuram@amd.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 1/2] net/axgbe: support flow control API
Date: Mon, 16 Mar 2020 03:53:15 +0000 [thread overview]
Message-ID: <DM6PR12MB2987006B8A1923EBE0EE32E2AEF90@DM6PR12MB2987.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20200303081958.71437-1-asomalap@amd.com>
[AMD Public Use]
For series,
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
>From: Amaranath Somalapuram <asomalap@amd.com>
>
>Adding api for flow_ctrl_get and flow_ctrl_set.
>By default axgbe driver flow control is disabled.
>Adding dpdk flow control to set water high and low.
>
>Signed-off-by: Amaranath Somalapuram <asomalap@amd.com>
>---
> drivers/net/axgbe/axgbe_ethdev.c | 84 ++++++++++++++++++++++++++++++++ drivers/net/axgbe/axgbe_ethdev.h | 11 +++++
> 2 files changed, 95 insertions(+)
>
>diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
>index 00974e737..867c4744f 100644
>--- a/drivers/net/axgbe/axgbe_ethdev.c
>+++ b/drivers/net/axgbe/axgbe_ethdev.c
>@@ -47,6 +47,10 @@ axgbe_dev_xstats_get_names_by_id(struct rte_eth_dev *dev, static int axgbe_dev_xstats_reset(struct rte_eth_dev *dev); static int axgbe_dev_info_get(struct rte_eth_dev *dev,
> struct rte_eth_dev_info *dev_info);
>+static int axgbe_flow_ctrl_get(struct rte_eth_dev *dev,
>+ struct rte_eth_fc_conf *fc_conf);
>+static int axgbe_flow_ctrl_set(struct rte_eth_dev *dev,
>+ struct rte_eth_fc_conf *fc_conf);
>
> struct axgbe_xstats {
> char name[RTE_ETH_XSTATS_NAME_SIZE];
>@@ -174,6 +178,8 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
> .rx_queue_release = axgbe_dev_rx_queue_release,
> .tx_queue_setup = axgbe_dev_tx_queue_setup,
> .tx_queue_release = axgbe_dev_tx_queue_release,
>+ .flow_ctrl_get = axgbe_flow_ctrl_get,
>+ .flow_ctrl_set = axgbe_flow_ctrl_set,
> };
>
> static int axgbe_phy_reset(struct axgbe_port *pdata) @@ -843,6 +849,84 @@ axgbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
> return 0;
> }
>
>+static int
>+axgbe_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf
>+*fc_conf) {
>+ struct axgbe_port *pdata = dev->data->dev_private;
>+ struct xgbe_fc_info fc = pdata->fc;
>+ unsigned int reg, reg_val = 0;
>+
>+ reg = MAC_Q0TFCR;
>+ reg_val = AXGMAC_IOREAD(pdata, reg);
>+ fc.low_water[0] = AXGMAC_MTL_IOREAD_BITS(pdata, 0, MTL_Q_RQFCR, RFA);
>+ fc.high_water[0] = AXGMAC_MTL_IOREAD_BITS(pdata, 0, MTL_Q_RQFCR, RFD);
>+ fc.pause_time[0] = AXGMAC_GET_BITS(reg_val, MAC_Q0TFCR, PT);
>+ fc.autoneg = pdata->pause_autoneg;
>+
>+ if (pdata->rx_pause && pdata->tx_pause)
>+ fc.mode = RTE_FC_FULL;
>+ else if (pdata->rx_pause)
>+ fc.mode = RTE_FC_RX_PAUSE;
>+ else if (pdata->tx_pause)
>+ fc.mode = RTE_FC_TX_PAUSE;
>+ else
>+ fc.mode = RTE_FC_NONE;
>+
>+ fc_conf->high_water = (1024 + (fc.low_water[0] << 9)) / 1024;
>+ fc_conf->low_water = (1024 + (fc.high_water[0] << 9)) / 1024;
>+ fc_conf->pause_time = fc.pause_time[0];
>+ fc_conf->send_xon = fc.send_xon;
>+ fc_conf->mode = fc.mode;
>+
>+ return 0;
>+}
>+
>+static int
>+axgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf
>+*fc_conf) {
>+ struct axgbe_port *pdata = dev->data->dev_private;
>+ struct xgbe_fc_info fc = pdata->fc;
>+ unsigned int reg, reg_val = 0;
>+ reg = MAC_Q0TFCR;
>+
>+ pdata->pause_autoneg = fc_conf->autoneg;
>+ pdata->phy.pause_autoneg = pdata->pause_autoneg;
>+ fc.send_xon = fc_conf->send_xon;
>+ AXGMAC_MTL_IOWRITE_BITS(pdata, 0, MTL_Q_RQFCR, RFA,
>+ AXGMAC_FLOW_CONTROL_VALUE(1024 * fc_conf->high_water));
>+ AXGMAC_MTL_IOWRITE_BITS(pdata, 0, MTL_Q_RQFCR, RFD,
>+ AXGMAC_FLOW_CONTROL_VALUE(1024 * fc_conf->low_water));
>+ AXGMAC_SET_BITS(reg_val, MAC_Q0TFCR, PT, fc_conf->pause_time);
>+ AXGMAC_IOWRITE(pdata, reg, reg_val);
>+ fc.mode = fc_conf->mode;
>+
>+ if (fc.mode == RTE_FC_FULL) {
>+ pdata->tx_pause = 1;
>+ pdata->rx_pause = 1;
>+ } else if (fc.mode == RTE_FC_RX_PAUSE) {
>+ pdata->tx_pause = 0;
>+ pdata->rx_pause = 1;
>+ } else if (fc.mode == RTE_FC_TX_PAUSE) {
>+ pdata->tx_pause = 1;
>+ pdata->rx_pause = 0;
>+ } else {
>+ pdata->tx_pause = 0;
>+ pdata->rx_pause = 0;
>+ }
>+
>+ if (pdata->tx_pause != (unsigned int)pdata->phy.tx_pause)
>+ pdata->hw_if.config_tx_flow_control(pdata);
>+
>+ if (pdata->rx_pause != (unsigned int)pdata->phy.rx_pause)
>+ pdata->hw_if.config_rx_flow_control(pdata);
>+
>+ pdata->hw_if.config_flow_control(pdata);
>+ pdata->phy.tx_pause = pdata->tx_pause;
>+ pdata->phy.rx_pause = pdata->rx_pause;
>+
>+ return 0;
>+}
>+
> static void axgbe_get_all_hw_features(struct axgbe_port *pdata) {
> unsigned int mac_hfr0, mac_hfr1, mac_hfr2; diff --git a/drivers/net/axgbe/axgbe_ethdev.h b/drivers/net/axgbe/axgbe_ethdev.h
>index a1083b17b..436d780c9 100644
>--- a/drivers/net/axgbe/axgbe_ethdev.h
>+++ b/drivers/net/axgbe/axgbe_ethdev.h
>@@ -485,6 +485,16 @@ struct axgbe_mmc_stats {
> uint64_t rxwatchdogerror;
> };
>
>+/* Flow control parameters */
>+struct xgbe_fc_info {
>+ uint32_t high_water[AXGBE_PRIORITY_QUEUES];
>+ uint32_t low_water[AXGBE_PRIORITY_QUEUES];
>+ uint16_t pause_time[AXGBE_PRIORITY_QUEUES];
>+ uint16_t send_xon;
>+ enum rte_eth_fc_mode mode;
>+ uint8_t autoneg;
>+};
>+
> /*
> * Structure to store private data for each port.
> */
>@@ -625,6 +635,7 @@ struct axgbe_port {
> uint32_t rx_csum_enable;
>
> struct axgbe_mmc_stats mmc_stats;
>+ struct xgbe_fc_info fc;
> };
>
> void axgbe_init_function_ptrs_dev(struct axgbe_hw_if *hw_if);
>--
>2.17.1
>
next prev parent reply other threads:[~2020-03-16 3:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 8:19 asomalap
2020-03-03 8:19 ` [dpdk-dev] [PATCH v4 2/2] net/axgbe: support priority " asomalap
2020-03-16 3:53 ` Kumar, Ravi1 [this message]
2020-03-16 12:52 ` [dpdk-dev] [PATCH v4 1/2] net/axgbe: support " Ferruh Yigit
-- strict thread matches above, loose matches on Subject: below --
2020-03-02 8:15 asomalap
2020-03-02 7:46 asomalap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR12MB2987006B8A1923EBE0EE32E2AEF90@DM6PR12MB2987.namprd12.prod.outlook.com \
--to=ravi1.kumar@amd.com \
--cc=Amaranath.Somalapuram@amd.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).