From: "Kumar, Ravi1" <Ravi1.Kumar@amd.com>
To: "Somalapuram, Amaranath" <Amaranath.Somalapuram@amd.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v1] net/axgbe: support sfp module EEPROM
Date: Thu, 9 Apr 2020 09:42:21 +0000 [thread overview]
Message-ID: <DM6PR12MB29879ED541D43D75646F323CAEC10@DM6PR12MB2987.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20200408070803.32051-1-asomalap@amd.com>
[AMD Public Use]
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
>
>
>-----Original Message-----
>From: Somalapuram, Amaranath <Amaranath.Somalapuram@amd.com>
>Sent: Wednesday, April 8, 2020 12:38 PM
>To: dev@dpdk.org
>Cc: Kumar, Ravi1 <Ravi1.Kumar@amd.com>
>Subject: [PATCH v1] net/axgbe: support sfp module EEPROM
>
>From: Amaranath Somalapuram <Amaranath.Somalapuram@amd.com>
>
>Adding API for get_module_eeprom and get_module_info.
>
>Signed-off-by: Amaranath Somalapuram <Amaranath.Somalapuram@amd.com>
>---
> drivers/net/axgbe/axgbe_ethdev.c | 2 +
> drivers/net/axgbe/axgbe_phy.h | 4 ++
> drivers/net/axgbe/axgbe_phy_impl.c | 107 +++++++++++++++++++++++++++++
> 3 files changed, 113 insertions(+)
>
>diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
>index 867058845..ea2f9bba1 100644
>--- a/drivers/net/axgbe/axgbe_ethdev.c
>+++ b/drivers/net/axgbe/axgbe_ethdev.c
>@@ -214,6 +214,8 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
> .dev_supported_ptypes_get = axgbe_dev_supported_ptypes_get,
> .rx_descriptor_status = axgbe_dev_rx_descriptor_status,
> .tx_descriptor_status = axgbe_dev_tx_descriptor_status,
>+ .get_module_info = axgbe_get_module_info,
>+ .get_module_eeprom = axgbe_get_module_eeprom,
> };
>
> static int axgbe_phy_reset(struct axgbe_port *pdata) diff --git a/drivers/net/axgbe/axgbe_phy.h b/drivers/net/axgbe/axgbe_phy.h index 77ee20a31..d9d7fde41 100644
>--- a/drivers/net/axgbe/axgbe_phy.h
>+++ b/drivers/net/axgbe/axgbe_phy.h
>@@ -188,5 +188,9 @@
> #define DUPLEX_FULL 0x01
> #define DUPLEX_UNKNOWN 0xff
>
>+int axgbe_get_module_info(struct rte_eth_dev *dev,
>+ struct rte_eth_dev_module_info *modinfo); int
>+axgbe_get_module_eeprom(struct rte_eth_dev *dev,
>+ struct rte_dev_eeprom_info *info);
> #endif
> /* PHY */
>diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
>index 02236ec19..53716071f 100644
>--- a/drivers/net/axgbe/axgbe_phy_impl.c
>+++ b/drivers/net/axgbe/axgbe_phy_impl.c
>@@ -141,12 +141,18 @@ enum axgbe_sfp_speed {
>
> #define AXGBE_SFP_EXTD_CC 31
>
>+#define AXGBE_SFP_EEPROM_PAGE_SIZE 256
>+
> struct axgbe_sfp_eeprom {
> u8 base[64];
> u8 extd[32];
> u8 vendor[32];
> };
>
>+struct axgbe_sfp_eeprom_module {
>+ u8 base[256];
>+};
>+
> #define AXGBE_BEL_FUSE_VENDOR "BEL-FUSE"
> #define AXGBE_BEL_FUSE_PARTNO "1GBT-SFP06"
>
>@@ -734,6 +740,106 @@ static int axgbe_phy_sfp_read_eeprom(struct axgbe_port *pdata)
> return ret;
> }
>
>+int axgbe_get_module_info(struct rte_eth_dev *dev,
>+ struct rte_eth_dev_module_info *modinfo) {
>+ struct axgbe_port *pdata = dev->data->dev_private;
>+ struct axgbe_sfp_eeprom sfp_eeprom;
>+ uint8_t eeprom_addr;
>+ int ret;
>+
>+ ret = axgbe_phy_get_comm_ownership(pdata);
>+
>+ if (ret)
>+ return -EIO;
>+
>+ ret = axgbe_phy_sfp_get_mux(pdata);
>+
>+ if (ret) {
>+ PMD_DRV_LOG(ERR, "I2C error setting SFP MUX\n");
>+ return ret;
>+ }
>+
>+ eeprom_addr = 0;
>+ ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_SERIAL_ID_ADDRESS,
>+ &eeprom_addr, sizeof(eeprom_addr),
>+ &sfp_eeprom, sizeof(sfp_eeprom));
>+
>+ if (ret) {
>+ PMD_DRV_LOG(ERR, "I2C error reading SFP EEPROM\n");
>+ goto put;
>+ }
>+
>+ if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] != 0xff) {
>+ if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] == 0) {
>+ modinfo->type = RTE_ETH_MODULE_SFF_8079;
>+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
>+ } else {
>+ modinfo->type = RTE_ETH_MODULE_SFF_8472;
>+ modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
>+ }
>+ }
>+
>+
>+put:
>+ axgbe_phy_sfp_put_mux(pdata);
>+ axgbe_phy_put_comm_ownership(pdata);
>+ return 0;
>+}
>+
>+int axgbe_get_module_eeprom(struct rte_eth_dev *dev,
>+ struct rte_dev_eeprom_info *info)
>+{
>+ struct axgbe_port *pdata = dev->data->dev_private;
>+ struct axgbe_sfp_eeprom_module sfp_eeprom;
>+ uint8_t eeprom_addr;
>+ uint8_t *data;
>+ uint32_t i;
>+ int ret;
>+
>+ ret = axgbe_phy_get_comm_ownership(pdata);
>+
>+ if (ret)
>+ return -EIO;
>+
>+ if (!info || !info->length || !info->data)
>+ return -EINVAL;
>+
>+ ret = axgbe_phy_sfp_get_mux(pdata);
>+ if (ret) {
>+ PMD_DRV_LOG(ERR, "I2C error setting SFP MUX\n");
>+ return ret;
>+ }
>+
>+ eeprom_addr = 0;
>+ ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_SERIAL_ID_ADDRESS,
>+ &eeprom_addr, sizeof(eeprom_addr),
>+ &sfp_eeprom, sizeof(sfp_eeprom));
>+ if (ret) {
>+ PMD_DRV_LOG(ERR, "I2C error reading SFP EEPROM\n");
>+ goto put;
>+ }
>+ data = info->data;
>+
>+ /* for AXGBE_SFP_SERIAL_ID_ADDRESS */
>+ for (i = 0; i < AXGBE_SFP_EEPROM_PAGE_SIZE; i++)
>+ data[i] = sfp_eeprom.base[i];
>+
>+ eeprom_addr = 0;
>+ ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_DIAG_INFO_ADDRESS,
>+ &eeprom_addr, sizeof(eeprom_addr),
>+ &sfp_eeprom, sizeof(sfp_eeprom));
>+
>+ /* for AXGBE_SFP_DIAG_INFO_ADDRESS */
>+ for (i = 0; i < info->length - AXGBE_SFP_EEPROM_PAGE_SIZE; i++)
>+ data[i + AXGBE_SFP_EEPROM_PAGE_SIZE] = sfp_eeprom.base[i];
>+
>+put:
>+ axgbe_phy_sfp_put_mux(pdata);
>+ axgbe_phy_put_comm_ownership(pdata);
>+ return 0;
>+}
>+
> static void axgbe_phy_sfp_signals(struct axgbe_port *pdata) {
> struct axgbe_phy_data *phy_data = pdata->phy_data; @@ -741,6 +847,7 @@ static void axgbe_phy_sfp_signals(struct axgbe_port *pdata)
> u8 gpio_reg, gpio_ports[2];
> int ret;
>
>+
> /* Read the input port registers */
> gpio_reg = 0;
> ret = axgbe_phy_i2c_read(pdata, phy_data->sfp_gpio_address,
>--
>2.17.1
>
next prev parent reply other threads:[~2020-04-09 9:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-08 7:08 asomalap
2020-04-08 8:30 ` Somalapuram, Amaranath
2020-04-09 9:42 ` Kumar, Ravi1 [this message]
2020-04-09 13:16 ` Ferruh Yigit
2020-05-14 13:43 asomalap
2020-05-14 16:35 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR12MB29879ED541D43D75646F323CAEC10@DM6PR12MB2987.namprd12.prod.outlook.com \
--to=ravi1.kumar@amd.com \
--cc=Amaranath.Somalapuram@amd.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).