[dpdk-dev] [PATCH 0/4] crypto/qat: add DOCSISBPI mode support

[dpdk-dev] [PATCH 0/4] crypto/qat: add DOCSISBPI mode support

[Fiona Trahe]

This patchset adds DOCSISBPI mode support to the
QuickAssist PMD and extends test-suites accordingly.

This patchset depends on the following patches/patchsets:
(http://dpdk.org/dev/patchwork/patch/20691)
(http://dpdk.org/dev/patchwork/patch/20693)
(http://dpdk.org/dev/patchwork/patch/20694)
(http://dpdk.org/dev/patchwork/patch/20899)

Fiona Trahe (4):
  crypto/qat: adding docsisbpi mode support
  test: add AES DOCSIS tests for QAT PMD
  test: add DES DOCSIS tests for QAT PMD
  test: added crypto OOP tests

 doc/guides/cryptodevs/overview.rst               |   2 +
 doc/guides/cryptodevs/qat.rst                    |   2 +
 doc/guides/rel_notes/release_17_05.rst           |   8 +
 app/test/test_cryptodev.c                        |  36 +++
 app/test/test_cryptodev_aes_test_vectors.h       |  76 +++++-
 app/test/test_cryptodev_des_test_vectors.h       |  67 ++++-
 drivers/crypto/qat/qat_adf/qat_algs.h            |   4 +
 drivers/crypto/qat/qat_adf/qat_algs_build_desc.c |  34 ++-
 drivers/crypto/qat/qat_crypto.c                  | 305 ++++++++++++++++++++++-
 9 files changed, 518 insertions(+), 16 deletions(-)

-- 
2.5.0

[dpdk-dev] [PATCH 1/4] crypto/qat: adding docsisbpi mode support

[Fiona Trahe]

DOCSISPBI mode is handled in the QAT PMD by sending full blocks to the
hardware device for encryption and using openssl libcrypto for pre- or
post-processing of any partial blocks.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 doc/guides/cryptodevs/overview.rst               |   2 +
 doc/guides/cryptodevs/qat.rst                    |   2 +
 doc/guides/rel_notes/release_17_05.rst           |   6 +
 drivers/crypto/qat/qat_adf/qat_algs.h            |   4 +
 drivers/crypto/qat/qat_adf/qat_algs_build_desc.c |  34 ++-
 drivers/crypto/qat/qat_crypto.c                  | 305 ++++++++++++++++++++++-
 6 files changed, 350 insertions(+), 3 deletions(-)

diff --git a/doc/guides/cryptodevs/overview.rst b/doc/guides/cryptodevs/overview.rst
index 4bbfadb..7dda404 100644
--- a/doc/guides/cryptodevs/overview.rst
+++ b/doc/guides/cryptodevs/overview.rst
@@ -65,6 +65,8 @@ Supported Cipher Algorithms
    "SNOW3G_UEA2",x,,,,x,,,
    "KASUMI_F8",,,,,,x,,
    "ZUC_EEA3",,,,,,,x,
+   "AES_DOCSISBPI",x,,,,,,,
+   "DES_DOCSISBPI",x,,,,,,,
 
 Supported Authentication Algorithms
 
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 9ecd19b..e239a25 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -55,6 +55,8 @@ Cipher algorithms:
 * ``RTE_CRYPTO_CIPHER_NULL``
 * ``RTE_CRYPTO_CIPHER_KASUMI_F8``
 * ``RTE_CRYPTO_CIPHER_DES_CBC``
+* ``RTE_CRYPTO_CIPHER_AES_DOCSISBPI``
+* ``RTE_CRYPTO_CIPHER_DES_DOCSISBPI``
 
 Hash algorithms:
 
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 43d9b25..1725f77 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -53,6 +53,12 @@ New Features
 
   * DES DOCSIS BPI algorithm.
 
+* **Updated the QAT PMD.**
+
+  The QAT PMD has been updated with additional support for:
+
+  * AES DOCSIS BPI algorithm.
+  * DES DOCSIS BPI algorithm.
 
 Resolved Issues
 ---------------
diff --git a/drivers/crypto/qat/qat_adf/qat_algs.h b/drivers/crypto/qat/qat_adf/qat_algs.h
index b9e3fd6..011a88c 100644
--- a/drivers/crypto/qat/qat_adf/qat_algs.h
+++ b/drivers/crypto/qat/qat_adf/qat_algs.h
@@ -112,6 +112,7 @@ struct qat_session {
 	enum icp_qat_hw_cipher_mode qat_mode;
 	enum icp_qat_hw_auth_algo qat_hash_alg;
 	enum icp_qat_hw_auth_op auth_op;
+	void *bpi_ctx;
 	struct qat_alg_cd cd;
 	uint8_t *cd_cur_ptr;
 	phys_addr_t cd_paddr;
@@ -154,8 +155,11 @@ void qat_alg_ablkcipher_init_dec(struct qat_alg_ablkcipher_cd *cd,
 					unsigned int keylen);
 
 int qat_alg_validate_aes_key(int key_len, enum icp_qat_hw_cipher_algo *alg);
+int qat_alg_validate_aes_docsisbpi_key(int key_len,
+					enum icp_qat_hw_cipher_algo *alg);
 int qat_alg_validate_snow3g_key(int key_len, enum icp_qat_hw_cipher_algo *alg);
 int qat_alg_validate_kasumi_key(int key_len, enum icp_qat_hw_cipher_algo *alg);
 int qat_alg_validate_3des_key(int key_len, enum icp_qat_hw_cipher_algo *alg);
 int qat_alg_validate_des_key(int key_len, enum icp_qat_hw_cipher_algo *alg);
+int qat_cipher_get_block_size(enum icp_qat_hw_cipher_algo qat_cipher_alg);
 #endif
diff --git a/drivers/crypto/qat/qat_adf/qat_algs_build_desc.c b/drivers/crypto/qat/qat_adf/qat_algs_build_desc.c
index fbeef0a..96835d9 100644
--- a/drivers/crypto/qat/qat_adf/qat_algs_build_desc.c
+++ b/drivers/crypto/qat/qat_adf/qat_algs_build_desc.c
@@ -54,12 +54,31 @@
 #include <rte_crypto_sym.h>
 
 #include "../qat_logs.h"
-#include "qat_algs.h"
 
 #include <openssl/sha.h>	/* Needed to calculate pre-compute values */
 #include <openssl/aes.h>	/* Needed to calculate pre-compute values */
 #include <openssl/md5.h>	/* Needed to calculate pre-compute values */
 
+#include "qat_algs.h"
+
+/* returns block size in bytes per cipher algo */
+int qat_cipher_get_block_size(enum icp_qat_hw_cipher_algo qat_cipher_alg)
+{
+	switch (qat_cipher_alg) {
+	case ICP_QAT_HW_CIPHER_ALGO_DES:
+		return ICP_QAT_HW_DES_BLK_SZ;
+	case ICP_QAT_HW_CIPHER_ALGO_3DES:
+		return ICP_QAT_HW_3DES_BLK_SZ;
+	case ICP_QAT_HW_CIPHER_ALGO_AES128:
+	case ICP_QAT_HW_CIPHER_ALGO_AES192:
+	case ICP_QAT_HW_CIPHER_ALGO_AES256:
+		return ICP_QAT_HW_AES_BLK_SZ;
+	default:
+		PMD_DRV_LOG(ERR, "invalid block cipher alg %u", qat_cipher_alg);
+		return -EFAULT;
+	};
+	return -EFAULT;
+}
 
 /*
  * Returns size in bytes per hash algo for state1 size field in cd_ctrl
@@ -838,6 +857,19 @@ int qat_alg_validate_aes_key(int key_len, enum icp_qat_hw_cipher_algo *alg)
 	return 0;
 }
 
+int qat_alg_validate_aes_docsisbpi_key(int key_len,
+		enum icp_qat_hw_cipher_algo *alg)
+{
+	switch (key_len) {
+	case ICP_QAT_HW_AES_128_KEY_SZ:
+		*alg = ICP_QAT_HW_CIPHER_ALGO_AES128;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
 int qat_alg_validate_snow3g_key(int key_len, enum icp_qat_hw_cipher_algo *alg)
 {
 	switch (key_len) {
diff --git a/drivers/crypto/qat/qat_crypto.c b/drivers/crypto/qat/qat_crypto.c
index 43e1d00..d20aa40 100644
--- a/drivers/crypto/qat/qat_crypto.c
+++ b/drivers/crypto/qat/qat_crypto.c
@@ -59,6 +59,8 @@
 #include <rte_string_fns.h>
 #include <rte_spinlock.h>
 #include <rte_hexdump.h>
+#include <rte_crypto_sym.h>
+#include <openssl/evp.h>
 
 #include "qat_logs.h"
 #include "qat_algs.h"
@@ -330,6 +332,26 @@ static const struct rte_cryptodev_capabilities qat_pmd_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* AES DOCSISBPI */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
+				.block_size = 16,
+				.key_size = {
+					.min = 16,
+					.max = 16,
+					.increment = 0
+				},
+				.iv_size = {
+					.min = 16,
+					.max = 16,
+					.increment = 0
+				}
+			}, }
+		}, }
+	},
 	{	/* SNOW 3G (UEA2) */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -516,9 +538,128 @@ static const struct rte_cryptodev_capabilities qat_pmd_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* DES DOCSISBPI */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_DES_DOCSISBPI,
+				.block_size = 8,
+				.key_size = {
+					.min = 8,
+					.max = 8,
+					.increment = 0
+				},
+				.iv_size = {
+					.min = 8,
+					.max = 8,
+					.increment = 0
+				}
+			}, }
+		}, }
+	},
 	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };
 
+/** Encrypt a single partial block
+ *  Depends on openssl libcrypto
+ *  Uses ECB+XOR to do CFB encryption, same result, more performant
+ */
+static inline int
+bpi_cipher_encrypt(uint8_t *src, uint8_t *dst,
+		uint8_t *iv, int ivlen, int srclen,
+		void *bpi_ctx)
+{
+	EVP_CIPHER_CTX *ctx = (EVP_CIPHER_CTX *)bpi_ctx;
+	int encrypted_ivlen;
+	uint8_t encrypted_iv[16];
+	int i;
+
+	/* ECB method: encrypt the IV, then XOR this with plaintext */
+	if (EVP_EncryptUpdate(ctx, encrypted_iv, &encrypted_ivlen, iv, ivlen)
+								<= 0)
+		goto cipher_encrypt_err;
+
+	for (i = 0; i < srclen; i++)
+		*(dst+i) = *(src+i)^(encrypted_iv[i]);
+
+	return 0;
+
+cipher_encrypt_err:
+	PMD_DRV_LOG(ERR, "libcrypto ECB cipher encrypt failed");
+	return -EINVAL;
+}
+
+/** Decrypt a single partial block
+ *  Depends on openssl libcrypto
+ *  Uses ECB+XOR to do CFB encryption, same result, more performant
+ */
+static inline int
+bpi_cipher_decrypt(uint8_t *src, uint8_t *dst,
+		uint8_t *iv, int ivlen, int srclen,
+		void *bpi_ctx)
+{
+	EVP_CIPHER_CTX *ctx = (EVP_CIPHER_CTX *)bpi_ctx;
+	int encrypted_ivlen;
+	uint8_t encrypted_iv[16];
+	int i;
+
+	/* ECB method: encrypt (not decrypt!) the IV, then XOR with plaintext */
+	if (EVP_EncryptUpdate(ctx, encrypted_iv, &encrypted_ivlen, iv, ivlen)
+								<= 0)
+		goto cipher_decrypt_err;
+
+	for (i = 0; i < srclen; i++)
+		*(dst+i) = *(src+i)^(encrypted_iv[i]);
+
+	return 0;
+
+cipher_decrypt_err:
+	PMD_DRV_LOG(ERR, "libcrypto ECB cipher encrypt for BPI IV failed");
+	return -EINVAL;
+}
+
+/** Creates a context in either AES or DES in ECB mode
+ *  Depends on openssl libcrypto
+ */
+static void *
+bpi_cipher_ctx_init(enum rte_crypto_cipher_algorithm cryptodev_algo,
+		enum rte_crypto_cipher_operation direction __rte_unused,
+					uint8_t *key)
+{
+	const EVP_CIPHER *algo = NULL;
+	EVP_CIPHER_CTX *ctx = EVP_CIPHER_CTX_new();
+
+	if (ctx == NULL)
+		goto ctx_init_err;
+
+	if (cryptodev_algo == RTE_CRYPTO_CIPHER_DES_DOCSISBPI)
+		algo = EVP_des_ecb();
+	else
+		algo = EVP_aes_128_ecb();
+
+	/* IV will be ECB encrypted whether direction is encrypt or decrypt*/
+	if (EVP_EncryptInit_ex(ctx, algo, NULL, key, 0) != 1)
+		goto ctx_init_err;
+
+	return ctx;
+
+ctx_init_err:
+	if (ctx != NULL)
+		EVP_CIPHER_CTX_free(ctx);
+	return NULL;
+}
+
+/** Frees a context previously created
+ *  Depends on openssl libcrypto
+ */
+static void
+bpi_cipher_ctx_free(void *bpi_ctx)
+{
+	if (bpi_ctx != NULL)
+		EVP_CIPHER_CTX_free((EVP_CIPHER_CTX *)bpi_ctx);
+}
+
 static inline uint32_t
 adf_modulo(uint32_t data, uint32_t shift);
 
@@ -533,7 +674,11 @@ void qat_crypto_sym_clear_session(struct rte_cryptodev *dev,
 	phys_addr_t cd_paddr;
 
 	PMD_INIT_FUNC_TRACE();
-	if (session) {
+	if (sess) {
+		if (sess->bpi_ctx) {
+			bpi_cipher_ctx_free(sess->bpi_ctx);
+			sess->bpi_ctx = NULL;
+		}
 		cd_paddr = sess->cd_paddr;
 		memset(sess, 0, qat_crypto_sym_get_session_private_size(dev));
 		sess->cd_paddr = cd_paddr;
@@ -674,6 +819,38 @@ qat_crypto_sym_configure_session_cipher(struct rte_cryptodev *dev,
 		}
 		session->qat_mode = ICP_QAT_HW_CIPHER_CTR_MODE;
 		break;
+	case RTE_CRYPTO_CIPHER_DES_DOCSISBPI:
+		session->bpi_ctx = bpi_cipher_ctx_init(
+					cipher_xform->algo,
+					cipher_xform->op,
+					cipher_xform->key.data);
+		if (session->bpi_ctx == NULL) {
+			PMD_DRV_LOG(ERR, "failed to create DES BPI ctx");
+			goto error_out;
+		}
+		if (qat_alg_validate_des_key(cipher_xform->key.length,
+				&session->qat_cipher_alg) != 0) {
+			PMD_DRV_LOG(ERR, "Invalid DES cipher key size");
+			goto error_out;
+		}
+		session->qat_mode = ICP_QAT_HW_CIPHER_CBC_MODE;
+		break;
+	case RTE_CRYPTO_CIPHER_AES_DOCSISBPI:
+		session->bpi_ctx = bpi_cipher_ctx_init(
+					cipher_xform->algo,
+					cipher_xform->op,
+					cipher_xform->key.data);
+		if (session->bpi_ctx == NULL) {
+			PMD_DRV_LOG(ERR, "failed to create AES BPI ctx");
+			goto error_out;
+		}
+		if (qat_alg_validate_aes_docsisbpi_key(cipher_xform->key.length,
+				&session->qat_cipher_alg) != 0) {
+			PMD_DRV_LOG(ERR, "Invalid AES DOCSISBPI key size");
+			goto error_out;
+		}
+		session->qat_mode = ICP_QAT_HW_CIPHER_CBC_MODE;
+		break;
 	case RTE_CRYPTO_CIPHER_3DES_ECB:
 	case RTE_CRYPTO_CIPHER_AES_ECB:
 	case RTE_CRYPTO_CIPHER_AES_CCM:
@@ -703,6 +880,10 @@ qat_crypto_sym_configure_session_cipher(struct rte_cryptodev *dev,
 	return session;
 
 error_out:
+	if (session->bpi_ctx) {
+		bpi_cipher_ctx_free(session->bpi_ctx);
+		session->bpi_ctx = NULL;
+	}
 	rte_mempool_put(internals->sess_mp, session);
 	return NULL;
 }
@@ -717,7 +898,6 @@ qat_crypto_sym_configure_session(struct rte_cryptodev *dev,
 	struct qat_session *session = session_private;
 
 	int qat_cmd_id;
-
 	PMD_INIT_FUNC_TRACE();
 
 	/* Get requested QAT command id */
@@ -759,6 +939,7 @@ qat_crypto_sym_configure_session(struct rte_cryptodev *dev,
 		session->qat_cmd);
 		goto error_out;
 	}
+
 	return session;
 
 error_out:
@@ -868,6 +1049,113 @@ unsigned qat_crypto_sym_get_session_private_size(
 	return RTE_ALIGN_CEIL(sizeof(struct qat_session), 8);
 }
 
+static inline uint32_t
+qat_bpicipher_preprocess(struct qat_session *ctx,
+				struct rte_crypto_op *op)
+{
+	uint8_t block_len = qat_cipher_get_block_size(ctx->qat_cipher_alg);
+	struct rte_crypto_sym_op *sym_op = op->sym;
+	uint8_t last_block_len = sym_op->cipher.data.length % block_len;
+
+	if (last_block_len &&
+			ctx->qat_dir == ICP_QAT_HW_CIPHER_DECRYPT) {
+
+		/* Decrypt last block */
+		uint8_t *last_block, *dst, *iv;
+		uint32_t last_block_offset = sym_op->cipher.data.offset +
+				sym_op->cipher.data.length - last_block_len;
+		last_block = (uint8_t *) rte_pktmbuf_mtod_offset(sym_op->m_src,
+				uint8_t *, last_block_offset);
+
+		if (unlikely(sym_op->m_dst != NULL))
+			/* out-of-place operation (OOP) */
+			dst = (uint8_t *) rte_pktmbuf_mtod_offset(sym_op->m_dst,
+						uint8_t *, last_block_offset);
+		else
+			dst = last_block;
+
+		if (last_block_len < sym_op->cipher.data.length)
+			/* use previous block ciphertext as IV */
+			iv = last_block - block_len;
+		else
+			/* runt block, i.e. less than one full block */
+			iv = sym_op->cipher.iv.data;
+
+#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_TX
+		rte_hexdump(stdout, "BPI: src before pre-process:", last_block,
+			last_block_len);
+		if (sym_op->m_dst != NULL)
+			rte_hexdump(stdout, "BPI: dst before pre-process:", dst,
+				last_block_len);
+#endif
+		bpi_cipher_decrypt(last_block, dst, iv, block_len,
+				last_block_len, ctx->bpi_ctx);
+#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_TX
+		rte_hexdump(stdout, "BPI: src after pre-process:", last_block,
+			last_block_len);
+		if (sym_op->m_dst != NULL)
+			rte_hexdump(stdout, "BPI: dst after pre-process:", dst,
+				last_block_len);
+#endif
+	}
+
+	return sym_op->cipher.data.length - last_block_len;
+}
+
+static inline uint32_t
+qat_bpicipher_postprocess(struct qat_session *ctx,
+				struct rte_crypto_op *op)
+{
+	uint8_t block_len = qat_cipher_get_block_size(ctx->qat_cipher_alg);
+	struct rte_crypto_sym_op *sym_op = op->sym;
+	uint8_t last_block_len = sym_op->cipher.data.length % block_len;
+
+	if (last_block_len > 0 &&
+			ctx->qat_dir == ICP_QAT_HW_CIPHER_ENCRYPT) {
+
+		/* Encrypt last block */
+		uint8_t *last_block, *dst, *iv;
+		uint32_t last_block_offset;
+
+		last_block_offset = sym_op->cipher.data.offset +
+				sym_op->cipher.data.length - last_block_len;
+		last_block = (uint8_t *) rte_pktmbuf_mtod_offset(sym_op->m_src,
+				uint8_t *, last_block_offset);
+
+		if (unlikely(sym_op->m_dst != NULL))
+			/* out-of-place operation (OOP) */
+			dst = (uint8_t *) rte_pktmbuf_mtod_offset(sym_op->m_dst,
+						uint8_t *, last_block_offset);
+		else
+			dst = last_block;
+
+		if (last_block_len < sym_op->cipher.data.length)
+			/* use previous block ciphertext as IV */
+			iv = dst - block_len;
+		else
+			/* runt block, i.e. less than one full block */
+			iv = sym_op->cipher.iv.data;
+
+#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_RX
+		rte_hexdump(stdout, "BPI: src before post-process:", last_block,
+			last_block_len);
+		if (sym_op->m_dst != NULL)
+			rte_hexdump(stdout, "BPI: dst before post-process:",
+					dst, last_block_len);
+#endif
+		bpi_cipher_encrypt(last_block, dst, iv, block_len,
+				last_block_len, ctx->bpi_ctx);
+#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_RX
+		rte_hexdump(stdout, "BPI: src after post-process:", last_block,
+			last_block_len);
+		if (sym_op->m_dst != NULL)
+			rte_hexdump(stdout, "BPI: dst after post-process:", dst,
+				last_block_len);
+#endif
+	}
+	return sym_op->cipher.data.length - last_block_len;
+}
+
 uint16_t
 qat_pmd_enqueue_op_burst(void *qp, struct rte_crypto_op **ops,
 		uint16_t nb_ops)
@@ -956,8 +1244,13 @@ qat_pmd_dequeue_op_burst(void *qp, struct rte_crypto_op **ops,
 					resp_msg->comn_hdr.comn_status)) {
 			rx_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
 		} else {
+			struct qat_session *sess = (struct qat_session *)
+						(rx_op->sym->session->_private);
+			if (sess->bpi_ctx)
+				qat_bpicipher_postprocess(sess, rx_op);
 			rx_op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
 		}
+
 		*(uint32_t *)resp_msg = ADF_RING_EMPTY_SIG;
 		queue->head = adf_modulo(queue->head +
 				queue->msg_size,
@@ -1099,6 +1392,14 @@ qat_write_hw_desc_entry(struct rte_crypto_op *op, uint8_t *out_msg,
 			cipher_len = op->sym->cipher.data.length >> 3;
 			cipher_ofs = op->sym->cipher.data.offset >> 3;
 
+		} else if (ctx->bpi_ctx) {
+			/* DOCSIS - only send complete blocks to device
+			 * Process any partial block using CFB mode.
+			 * Even if 0 complete blocks, still send this to device
+			 * to get into rx queue for post-process and dequeuing
+			 */
+			cipher_len = qat_bpicipher_preprocess(ctx, op);
+			cipher_ofs = op->sym->cipher.data.offset;
 		} else {
 			cipher_len = op->sym->cipher.data.length;
 			cipher_ofs = op->sym->cipher.data.offset;
-- 
2.5.0

[dpdk-dev] [PATCH 2/4] test: add AES DOCSIS tests for QAT PMD

[Fiona Trahe]

Extend test suite to run AES DOCSIS tests on Intel
QuickAssist PMD.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 app/test/test_cryptodev.c                  | 18 ++++++++++++++++++
 app/test/test_cryptodev_aes_test_vectors.h | 18 ++++++++++++------
 2 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 7208fa6..ebc011b 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -1548,6 +1548,22 @@ test_AES_docsis_mb_all(void)
 }
 
 static int
+test_AES_docsis_qat_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool, ts_params->valid_devs[0],
+		RTE_CRYPTODEV_QAT_SYM_PMD,
+		BLKCIPHER_AES_DOCSIS_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
 test_authonly_mb_all(void)
 {
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -7570,6 +7586,8 @@ static struct unit_test_suite cryptodev_qat_testsuite  = {
 						test_3DES_cipheronly_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown,
 						test_DES_cipheronly_qat_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+						test_AES_docsis_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
 
 		/** AES GCM Authenticated Encryption */
diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index aacabab..992705e 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -1439,37 +1439,43 @@ static const struct blockcipher_test_case aes_docsis_test_cases[] = {
 		.test_descr = "AES-DOCSIS-BPI Full Block Encryption",
 		.test_data = &aes_test_data_docsis_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Runt Block Encryption",
 		.test_data = &aes_test_data_docsis_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Uneven Encryption",
 		.test_data = &aes_test_data_docsis_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Full Block Decryption",
 		.test_data = &aes_test_data_docsis_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Runt Block Decryption",
 		.test_data = &aes_test_data_docsis_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Uneven Decryption",
 		.test_data = &aes_test_data_docsis_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	}
 };
 #endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
-- 
2.5.0

[dpdk-dev] [PATCH 3/4] test: add DES DOCSIS tests for QAT PMD

[Fiona Trahe]

    Extend test suite to run DES DOCSIS tests on Intel
    QuickAssist PMD.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 app/test/test_cryptodev.c                  | 18 ++++++++++++++++++
 app/test/test_cryptodev_des_test_vectors.h | 18 ++++++++++++------
 2 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index ebc011b..b7c99ed 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -1564,6 +1564,22 @@ test_AES_docsis_qat_all(void)
 }
 
 static int
+test_DES_docsis_qat_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool, ts_params->valid_devs[0],
+		RTE_CRYPTODEV_QAT_SYM_PMD,
+		BLKCIPHER_DES_DOCSIS_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
 test_authonly_mb_all(void)
 {
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
@@ -7588,6 +7604,8 @@ static struct unit_test_suite cryptodev_qat_testsuite  = {
 						test_DES_cipheronly_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown,
 						test_AES_docsis_qat_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+						test_DES_docsis_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
 
 		/** AES GCM Authenticated Encryption */
diff --git a/app/test/test_cryptodev_des_test_vectors.h b/app/test/test_cryptodev_des_test_vectors.h
index b29a49e..06dcf5e 100644
--- a/app/test/test_cryptodev_des_test_vectors.h
+++ b/app/test/test_cryptodev_des_test_vectors.h
@@ -964,37 +964,43 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
 		.test_descr = "DES-DOCSIS-BPI Full Block Encryption",
 		.test_data = &des_test_data_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Runt Block Encryption",
 		.test_data = &des_test_data_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Uneven Encryption",
 		.test_data = &des_test_data_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Full Block Decryption",
 		.test_data = &des_test_data_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Runt Block Decryption",
 		.test_data = &des_test_data_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Uneven Decryption",
 		.test_data = &des_test_data_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	}
 
 };
-- 
2.5.0

[dpdk-dev] [PATCH 4/4] test: added crypto OOP tests

[Fiona Trahe]

Added out-of-place (OOP) tests for AES-CBC, AES-DOCSIS and DES-DOCSIS
to tests suites for QuickAssist and openssl PMDs.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 app/test/test_cryptodev_aes_test_vectors.h | 58 ++++++++++++++++++++++++++++++
 app/test/test_cryptodev_des_test_vectors.h | 49 ++++++++++++++++++++++++-
 2 files changed, 106 insertions(+), 1 deletion(-)

diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index 992705e..07d6eab 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -1378,6 +1378,22 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER
 	},
 	{
+		.test_descr = "AES-256-CBC OOP Encryption",
+		.test_data = &aes_test_data_11,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-256-CBC OOP Decryption",
+		.test_data = &aes_test_data_11,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
 		.test_descr = "AES-128-CTR Encryption",
 		.test_data = &aes_test_data_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
@@ -1476,6 +1492,48 @@ static const struct blockcipher_test_case aes_docsis_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-DOCSIS-BPI OOP Full Block Encryption",
+		.test_data = &aes_test_data_docsis_1,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-DOCSIS-BPI OOP Runt Block Encryption",
+		.test_data = &aes_test_data_docsis_2,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-DOCSIS-BPI OOP Uneven Block Encryption",
+		.test_data = &aes_test_data_docsis_3,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-DOCSIS-BPI OOP Full Block Decryption",
+		.test_data = &aes_test_data_docsis_1,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-DOCSIS-BPI OOP Runt Block Decryption",
+		.test_data = &aes_test_data_docsis_2,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "AES-DOCSIS-BPI OOP Uneven Block Decryption",
+		.test_data = &aes_test_data_docsis_3,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	}
 };
 #endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
diff --git a/app/test/test_cryptodev_des_test_vectors.h b/app/test/test_cryptodev_des_test_vectors.h
index 06dcf5e..b226794 100644
--- a/app/test/test_cryptodev_des_test_vectors.h
+++ b/app/test/test_cryptodev_des_test_vectors.h
@@ -1001,8 +1001,55 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "DES-DOCSIS-BPI OOP Full Block Encryption",
+		.test_data = &des_test_data_1,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "DES-DOCSIS-BPI OOP Runt Block Encryption",
+		.test_data = &des_test_data_2,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "DES-DOCSIS-BPI OOP Uneven Encryption",
+		.test_data = &des_test_data_3,
+		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "DES-DOCSIS-BPI OOP Full Block Decryption",
+		.test_data = &des_test_data_1,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "DES-DOCSIS-BPI OOP Runt Block Decryption",
+		.test_data = &des_test_data_2,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
+	},
+	{
+		.test_descr = "DES-DOCSIS-BPI OOP Uneven Decryption",
+		.test_data = &des_test_data_3,
+		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+		.feature_mask = BLOCKCIPHER_TEST_FEATURE_OOP,
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	}
-
 };
 
 static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
-- 
2.5.0

Re: [dpdk-dev] [PATCH 1/4] crypto/qat: adding docsisbpi mode support

[Jain, Deepak K]

> -----Original Message-----
> From: Trahe, Fiona
> Sent: Thursday, March 2, 2017 1:03 PM
> To: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Cc: Jain, Deepak K <deepak.k.jain@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>
> Subject: [PATCH 1/4] crypto/qat: adding docsisbpi mode support
> 
> DOCSISPBI mode is handled in the QAT PMD by sending full blocks to the
> hardware device for encryption and using openssl libcrypto for pre- or post-
> processing of any partial blocks.
> 
> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> ---
>  doc/guides/cryptodevs/overview.rst               |   2 +
>  doc/guides/cryptodevs/qat.rst                    |   2 +
>  doc/guides/rel_notes/release_17_05.rst           |   6 +
>  drivers/crypto/qat/qat_adf/qat_algs.h            |   4 +
>  drivers/crypto/qat/qat_adf/qat_algs_build_desc.c |  34 ++-
>  drivers/crypto/qat/qat_crypto.c                  | 305 ++++++++++++++++++++++-
>  6 files changed, 350 insertions(+), 3 deletions(-)
> 
> --
> 2.5.0
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>

Re: [dpdk-dev] [PATCH 4/4] test: added crypto OOP tests

[Jain, Deepak K]

> -----Original Message-----
> From: Trahe, Fiona
> Sent: Thursday, March 2, 2017 1:03 PM
> To: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Cc: Jain, Deepak K <deepak.k.jain@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>
> Subject: [PATCH 4/4] test: added crypto OOP tests
> 
> Added out-of-place (OOP) tests for AES-CBC, AES-DOCSIS and DES-DOCSIS to
> tests suites for QuickAssist and openssl PMDs.
> 
> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> --
> 2.5.0

Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>

Re: [dpdk-dev] [PATCH 2/4] test: add AES DOCSIS tests for QAT PMD

[Jain, Deepak K]

> -----Original Message-----
> From: Trahe, Fiona
> Sent: Thursday, March 2, 2017 1:03 PM
> To: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Cc: Jain, Deepak K <deepak.k.jain@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>
> Subject: [PATCH 2/4] test: add AES DOCSIS tests for QAT PMD
> 
> Extend test suite to run AES DOCSIS tests on Intel QuickAssist PMD.
> 
> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> ---
>  app/test/test_cryptodev.c                  | 18 ++++++++++++++++++
>  app/test/test_cryptodev_aes_test_vectors.h | 18 ++++++++++++------
>  2 files changed, 30 insertions(+), 6 deletions(-)
> 
> --
> 2.5.0
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>

Re: [dpdk-dev] [PATCH 3/4] test: add DES DOCSIS tests for QAT PMD

[Jain, Deepak K]

> -----Original Message-----
> From: Trahe, Fiona
> Sent: Thursday, March 2, 2017 1:03 PM
> To: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Cc: Jain, Deepak K <deepak.k.jain@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>
> Subject: [PATCH 3/4] test: add DES DOCSIS tests for QAT PMD
> 
>     Extend test suite to run DES DOCSIS tests on Intel
>     QuickAssist PMD.
> 

Is there an extra space above?
Otherwise

> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> ---
>  app/test/test_cryptodev.c                  | 18 ++++++++++++++++++
>  app/test/test_cryptodev_des_test_vectors.h | 18 ++++++++++++------
> --
> 2.5.0


Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>

Re: [dpdk-dev] [PATCH 2/4] test: add AES DOCSIS tests for QAT PMD

[Yang, GangX]

Tested-by: Yang Gang < gangx.yang@intel.com >
- Check patch: success
- Apply patch: success
- compilation: success
      OS: fedora23
      GCC: gcc_x86-64, 5.3.1
      Commit: dpdk-next-crypto(081fefb01748e7063b1b9692af89d8115ec64632)
      x86_64-native-linuxapp-gcc: compile pass
- dts validation:
-- Test Commit: e5041333988936fdb09d578ec4fb7cb0ce796ecb
-- OS/Kernel: Fedora23/4.2.3-300.fc23.x86_64
-- GCC: gcc version 5.3.1
-- CPU: Intel(R) Xeon(R) CPU E5-2680 v2 @ 1.80GHz
-- NIC: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572]
-- total 2,failed 0 (case1: contain cryptodev_qat_autotest and all of others cryptodev cases on unit test .
		 case 2: all of the related cases about QAT AES DOCSIS BPI cipher only and  cipher auth on l2fwd-crypto test)

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Fiona Trahe
Sent: Thursday, March 02, 2017 9:03 PM
To: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
Cc: Jain, Deepak K <deepak.k.jain@intel.com>; Trahe, Fiona <fiona.trahe@intel.com>
Subject: [dpdk-dev] [PATCH 2/4] test: add AES DOCSIS tests for QAT PMD

Extend test suite to run AES DOCSIS tests on Intel QuickAssist PMD.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 app/test/test_cryptodev.c                  | 18 ++++++++++++++++++
 app/test/test_cryptodev_aes_test_vectors.h | 18 ++++++++++++------
 2 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index 7208fa6..ebc011b 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -1548,6 +1548,22 @@ test_AES_docsis_mb_all(void)  }
 
 static int
+test_AES_docsis_qat_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool, ts_params->valid_devs[0],
+		RTE_CRYPTODEV_QAT_SYM_PMD,
+		BLKCIPHER_AES_DOCSIS_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
 test_authonly_mb_all(void)
 {
 	struct crypto_testsuite_params *ts_params = &testsuite_params; @@ -7570,6 +7586,8 @@ static struct unit_test_suite cryptodev_qat_testsuite  = {
 						test_3DES_cipheronly_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown,
 						test_DES_cipheronly_qat_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+						test_AES_docsis_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
 
 		/** AES GCM Authenticated Encryption */ diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index aacabab..992705e 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -1439,37 +1439,43 @@ static const struct blockcipher_test_case aes_docsis_test_cases[] = {
 		.test_descr = "AES-DOCSIS-BPI Full Block Encryption",
 		.test_data = &aes_test_data_docsis_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Runt Block Encryption",
 		.test_data = &aes_test_data_docsis_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Uneven Encryption",
 		.test_data = &aes_test_data_docsis_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Full Block Decryption",
 		.test_data = &aes_test_data_docsis_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Runt Block Decryption",
 		.test_data = &aes_test_data_docsis_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "AES-DOCSIS-BPI Uneven Decryption",
 		.test_data = &aes_test_data_docsis_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	}
 };
 #endif /* TEST_CRYPTODEV_AES_TEST_VECTORS_H_ */
--
2.5.0

Re: [dpdk-dev] [PATCH 3/4] test: add DES DOCSIS tests for QAT PMD

[Yang, GangX]

Tested-by: Yang Gang < gangx.yang@intel.com >
- Check patch: success
- Apply patch: success
- compilation: success
      OS: fedora23
      GCC: gcc_x86-64, 5.3.1
      Commit: dpdk-next-crypto(081fefb01748e7063b1b9692af89d8115ec64632)
      x86_64-native-linuxapp-gcc: compile pass
- dts validation:
-- Test Commit: e5041333988936fdb09d578ec4fb7cb0ce796ecb
-- OS/Kernel: Fedora23/4.2.3-300.fc23.x86_64
-- GCC: gcc version 5.3.1
-- CPU: Intel(R) Xeon(R) CPU E5-2680 v2 @ 1.80GHz
-- NIC: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ [8086:1572]
-- total 2,failed 0 (case1: contain cryptodev_qat_autotest and all of others cryptodev cases on unit test .
		 case 2: all of the related cases about QAT DES DOCSIS BPI cipher only and  cipher auth on l2fwd-crypto test)

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Fiona Trahe
Sent: Thursday, March 02, 2017 9:03 PM
To: dev@dpdk.org; De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
Cc: Jain, Deepak K <deepak.k.jain@intel.com>; Trahe, Fiona <fiona.trahe@intel.com>
Subject: [dpdk-dev] [PATCH 3/4] test: add DES DOCSIS tests for QAT PMD

    Extend test suite to run DES DOCSIS tests on Intel
    QuickAssist PMD.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 app/test/test_cryptodev.c                  | 18 ++++++++++++++++++
 app/test/test_cryptodev_des_test_vectors.h | 18 ++++++++++++------
 2 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c index ebc011b..b7c99ed 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -1564,6 +1564,22 @@ test_AES_docsis_qat_all(void)  }
 
 static int
+test_DES_docsis_qat_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool, ts_params->valid_devs[0],
+		RTE_CRYPTODEV_QAT_SYM_PMD,
+		BLKCIPHER_DES_DOCSIS_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
 test_authonly_mb_all(void)
 {
 	struct crypto_testsuite_params *ts_params = &testsuite_params; @@ -7588,6 +7604,8 @@ static struct unit_test_suite cryptodev_qat_testsuite  = {
 						test_DES_cipheronly_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown,
 						test_AES_docsis_qat_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+						test_DES_docsis_qat_all),
 		TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
 
 		/** AES GCM Authenticated Encryption */ diff --git a/app/test/test_cryptodev_des_test_vectors.h b/app/test/test_cryptodev_des_test_vectors.h
index b29a49e..06dcf5e 100644
--- a/app/test/test_cryptodev_des_test_vectors.h
+++ b/app/test/test_cryptodev_des_test_vectors.h
@@ -964,37 +964,43 @@ static const struct blockcipher_test_case des_docsis_test_cases[] = {
 		.test_descr = "DES-DOCSIS-BPI Full Block Encryption",
 		.test_data = &des_test_data_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Runt Block Encryption",
 		.test_data = &des_test_data_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Uneven Encryption",
 		.test_data = &des_test_data_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Full Block Decryption",
 		.test_data = &des_test_data_1,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Runt Block Decryption",
 		.test_data = &des_test_data_2,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	},
 	{
 		.test_descr = "DES-DOCSIS-BPI Uneven Decryption",
 		.test_data = &des_test_data_3,
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_QAT
 	}
 
 };
--
2.5.0

Re: [dpdk-dev] [PATCH 0/4] crypto/qat: add DOCSISBPI mode support

[De Lara Guarch, Pablo]

> -----Original Message-----
> From: Trahe, Fiona
> Sent: Thursday, March 02, 2017 1:03 PM
> To: dev@dpdk.org; De Lara Guarch, Pablo
> Cc: Jain, Deepak K; Trahe, Fiona
> Subject: [PATCH 0/4] crypto/qat: add DOCSISBPI mode support
> 
> This patchset adds DOCSISBPI mode support to the
> QuickAssist PMD and extends test-suites accordingly.
> 
> This patchset depends on the following patches/patchsets:
> (http://dpdk.org/dev/patchwork/patch/20691)
> (http://dpdk.org/dev/patchwork/patch/20693)
> (http://dpdk.org/dev/patchwork/patch/20694)
> (http://dpdk.org/dev/patchwork/patch/20899)
> 
> Fiona Trahe (4):
>   crypto/qat: adding docsisbpi mode support
>   test: add AES DOCSIS tests for QAT PMD
>   test: add DES DOCSIS tests for QAT PMD
>   test: added crypto OOP tests
> 
>  doc/guides/cryptodevs/overview.rst               |   2 +
>  doc/guides/cryptodevs/qat.rst                    |   2 +
>  doc/guides/rel_notes/release_17_05.rst           |   8 +
>  app/test/test_cryptodev.c                        |  36 +++
>  app/test/test_cryptodev_aes_test_vectors.h       |  76 +++++-
>  app/test/test_cryptodev_des_test_vectors.h       |  67 ++++-
>  drivers/crypto/qat/qat_adf/qat_algs.h            |   4 +
>  drivers/crypto/qat/qat_adf/qat_algs_build_desc.c |  34 ++-
>  drivers/crypto/qat/qat_crypto.c                  | 305
> ++++++++++++++++++++++-
>  9 files changed, 518 insertions(+), 16 deletions(-)
> 
> --
> 2.5.0

Applied to dpdk-next-crypto, after squashing the first three patches into one.

Thanks,
Pablo