DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev]  [PATCH 1/2] eventdev: introduce burst mode capabality
@ 2017-06-14  4:57 Jerin Jacob
  2017-06-14  4:57 ` [dpdk-dev] [PATCH 2/2] event/sw: advertise the burst mode capability Jerin Jacob
  2017-06-14 11:21 ` [dpdk-dev] [PATCH 1/2] eventdev: introduce burst mode capabality Van Haaren, Harry
  0 siblings, 2 replies; 5+ messages in thread
From: Jerin Jacob @ 2017-06-14  4:57 UTC (permalink / raw)
  To: dev
  Cc: bruce.richardson, harry.van.haaren, hemant.agrawal, gage.eads,
	nipun.gupta, narender.vangati, nikhil.rao, Jerin Jacob

Introducing the burst mode capability flag to express the event device
is capable of operating in burst mode for enqueue(forward, release) and
dequeue operation. If the device is not capable, then the application
still uses the rte_event_dequeue_burst() and rte_event_enqueue_burst()
but PMD accepts only one event at a time which is any way transparent
with the current rte_event_*_burst API semantics.

It solves two purposes:
1) Fix performance regression on the PMD which supports only nonburst
mode, and this issue is two-fold.

Typically the burst_worker main loop consists of following pseudo code:

while(1)
{
	uint16_t nb_rx = rte_event_dequeue_burst(ev,..);

	for (i=0; i < nb_rx; i++) {
		process(ev[i]);
		if (is_release_required(ev[i]))
			release_the_event(ev);
	}

        uint16_t nb_tx = rte_event_enqueue_burst(dev_id, port_id,
                                events, nb_rx);
        while (nb_tx < nb_rx)
            nb_tx += rte_event_enqueue_burst(dev_id, port_id,
            events + nb_tx, nb_rx - nb_tx);
}

Typically the non_burst_worker main loop consists of following pseudo code:
while(1)
{
    uint16_t nb_rx = rte_event_dequeue_burst(&ev, , 1);
    if (!nb_rx)
        continue;
    process(ev);
    while (rte_event_enqueue_burst(dev, port, &ev, 1) != 1);
}

Following overhead has been seen on nonburst mode capable PMDs with
burst mode version
- Extra explicit release(PMD does release on implicitly on next
dequeue) and thus avoids the cost additional driver function overhead.
- Extra "for" loop for event processing which compiler cannot detect at
runtime

2) Simplify the application configuration by avoiding the application to
find the correct enqueue and dequeue depth across different PMD.
If burst mode is not supported then, PMD can ignore depth field.
This will enable to write portable applications and makes
RFC eventdev_pipeline application works on OCTEONTX PMD
http://dpdk.org/dev/patchwork/patch/23799/

If an application wishes to get the maximum performance on nonburst
capable PMD then the application can write the code in a way that by
keeping packet processing function as inline functions and launch the
workers based on the capability.
The generic burst based worker still work on those PMDs without
any code change but this scheme needed only when the application wants
to gets the maximum performance out of nonburst capable PMDs.

This patch is based the on the real world test cases
http://dpdk.org/dev/patchwork/patch/24832/, Where without this scheme
20.9% performance drop observed per core.

See worker_wrapper(), perf_queue_worker(), perf_queue_worker_burst()
functions to use this scheme in a portable way without losing performance
on both sets of PMDs and achieving the portability.
http://dpdk.org/dev/patchwork/patch/24832/

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
---
 lib/librte_eventdev/rte_eventdev.c | 10 ++++++----
 lib/librte_eventdev/rte_eventdev.h | 20 ++++++++++++++++----
 2 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
index 20afc3f0e..d7f858980 100644
--- a/lib/librte_eventdev/rte_eventdev.c
+++ b/lib/librte_eventdev/rte_eventdev.c
@@ -429,8 +429,9 @@ rte_event_dev_configure(uint8_t dev_id,
 					dev_id);
 		return -EINVAL;
 	}
-	if (dev_conf->nb_event_port_dequeue_depth >
-			 info.max_event_port_dequeue_depth) {
+	if ((info.event_dev_cap & RTE_EVENT_DEV_CAP_BURST_MODE) &&
+		 (dev_conf->nb_event_port_dequeue_depth >
+			 info.max_event_port_dequeue_depth)) {
 		RTE_EDEV_LOG_ERR("dev%d nb_dq_depth=%d > max_dq_depth=%d",
 		dev_id, dev_conf->nb_event_port_dequeue_depth,
 		info.max_event_port_dequeue_depth);
@@ -443,8 +444,9 @@ rte_event_dev_configure(uint8_t dev_id,
 					dev_id);
 		return -EINVAL;
 	}
-	if (dev_conf->nb_event_port_enqueue_depth >
-			 info.max_event_port_enqueue_depth) {
+	if ((info.event_dev_cap & RTE_EVENT_DEV_CAP_BURST_MODE) &&
+		(dev_conf->nb_event_port_enqueue_depth >
+			 info.max_event_port_enqueue_depth)) {
 		RTE_EDEV_LOG_ERR("dev%d nb_enq_depth=%d > max_enq_depth=%d",
 		dev_id, dev_conf->nb_event_port_enqueue_depth,
 		info.max_event_port_enqueue_depth);
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index a248fe90e..5c12a9113 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -274,6 +274,14 @@ struct rte_mbuf; /* we just use mbuf pointers; no need to include rte_mbuf.h */
  *
  * @see RTE_EVENT_QUEUE_CFG_* values
  */
+#define RTE_EVENT_DEV_CAP_BURST_MODE          (1ULL << 4)
+/**< Event device is capable of operating in burst mode for enqueue(forward,
+ * release) and dequeue operation. If this capability is not set, application
+ * still uses the rte_event_dequeue_burst() and rte_event_enqueue_burst() but
+ * PMD accepts only one event at a time.
+ *
+ * @see rte_event_dequeue_burst() rte_event_enqueue_burst()
+ */
 
 /* Event device priority levels */
 #define RTE_EVENT_DEV_PRIORITY_HIGHEST   0
@@ -433,14 +441,16 @@ struct rte_event_dev_config {
 	/**< Maximum number of events can be dequeued at a time from an
 	 * event port by this device.
 	 * This value cannot exceed the *max_event_port_dequeue_depth*
-	 * which previously provided in rte_event_dev_info_get()
+	 * which previously provided in rte_event_dev_info_get().
+	 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
 	 * @see rte_event_port_setup()
 	 */
 	uint32_t nb_event_port_enqueue_depth;
 	/**< Maximum number of events can be enqueued at a time from an
 	 * event port by this device.
 	 * This value cannot exceed the *max_event_port_enqueue_depth*
-	 * which previously provided in rte_event_dev_info_get()
+	 * which previously provided in rte_event_dev_info_get().
+	 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
 	 * @see rte_event_port_setup()
 	 */
 	uint32_t event_dev_cfg;
@@ -642,12 +652,14 @@ struct rte_event_port_conf {
 	uint16_t dequeue_depth;
 	/**< Configure number of bulk dequeues for this event port.
 	 * This value cannot exceed the *nb_event_port_dequeue_depth*
-	 * which previously supplied to rte_event_dev_configure()
+	 * which previously supplied to rte_event_dev_configure().
+	 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
 	 */
 	uint16_t enqueue_depth;
 	/**< Configure number of bulk enqueues for this event port.
 	 * This value cannot exceed the *nb_event_port_enqueue_depth*
-	 * which previously supplied to rte_event_dev_configure()
+	 * which previously supplied to rte_event_dev_configure().
+	 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
 	 */
 };
 
-- 
2.13.1

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2017-06-20 14:16 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-14  4:57 [dpdk-dev] [PATCH 1/2] eventdev: introduce burst mode capabality Jerin Jacob
2017-06-14  4:57 ` [dpdk-dev] [PATCH 2/2] event/sw: advertise the burst mode capability Jerin Jacob
2017-06-14 11:22   ` Van Haaren, Harry
2017-06-20 14:15     ` Jerin Jacob
2017-06-14 11:21 ` [dpdk-dev] [PATCH 1/2] eventdev: introduce burst mode capabality Van Haaren, Harry

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).