Re: [dpdk-dev] [PATCH v2 0/2] net/e1000: convert to new Rx/Tx offloads API

["Zhang, Helin" <helin.zhang@intel.com>]

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhang, Qi Z
> Sent: Tuesday, April 3, 2018 9:42 PM
> To: Dai, Wei; Lu, Wenzhuo
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2 0/2] net/e1000: convert to new Rx/Tx
> offloads API
> 
> 
> 
> > -----Original Message-----
> > From: Dai, Wei
> > Sent: Tuesday, April 3, 2018 10:55 AM
> > To: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Zhang, Qi Z
> > <qi.z.zhang@intel.com>
> > Cc: dev@dpdk.org; Dai, Wei <wei.dai@intel.com>
> > Subject: [PATCH v2 0/2] net/e1000: convert to new Rx/Tx offloads API
> >
> > This patch set convert net/e1000 to new Rx/Tx offloads API.
> > All Rx offloads are per port features.
> > All Tx offloads of e1000 are per queue and also per packet as they are
> > enabled in Tx descriptor.
> > In the new offload API, per queue offload only need to be set in
> > queue_setup(). So if the maimum number of queues is only one in Rx or
> > Tx path, let all offloads in the path are per queue for better convenience.
> >
> > ---
> > v2: add offloads checking
> >
> >
> > Wei Dai (2):
> >   net/e1000: convert to new Rx offloads API
> >   net/e1000: convert to new Tx offloads API
> >
> >  drivers/net/e1000/e1000_ethdev.h |  14 ++++
> >  drivers/net/e1000/em_ethdev.c    |  58 ++++++++++----
> >  drivers/net/e1000/em_rxtx.c      | 155
> > +++++++++++++++++++++++++++++++++---
> >  drivers/net/e1000/igb_ethdev.c   |  60 +++++++-------
> >  drivers/net/e1000/igb_rxtx.c     | 167
> > +++++++++++++++++++++++++++++++++++----
> >  5 files changed, 385 insertions(+), 69 deletions(-)
> >
> > --
> > 2.9.5
> 
> Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Series applied to dpdk-next-net-intel, thanks!
/Helin