From: "Yang, Qiming" <qiming.yang@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>,
"Cao, Yahui" <yahui.cao@intel.com>,
"Xing, Beilei" <beilei.xing@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v3] net/ice: add flow mark hint support
Date: Mon, 18 Nov 2019 05:57:47 +0000 [thread overview]
Message-ID: <F5DF4F0E3AFEF648ADC1C3C33AD4DBF17A5792A6@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20191118004325.29601-1-qi.z.zhang@intel.com>
Hi,
> -----Original Message-----
> From: Zhang, Qi Z
> Sent: Monday, November 18, 2019 8:43 AM
> To: Yang, Qiming <qiming.yang@intel.com>; Cao, Yahui
> <yahui.cao@intel.com>; Xing, Beilei <beilei.xing@intel.com>
> Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: [PATCH v3] net/ice: add flow mark hint support
>
> Since not all data paths support flow mark, the driver need a hint from
> application to select the correct data path if flow mark is required. The patch
> introduce a devarg "flow-mark-support" as a workaround solution, since a
> standard way is still ongoing.
>
> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> ---
>
> v3:
> - add "experimental notification" in ice.rst
>
> v2:
> - fix typo
>
> doc/guides/nics/ice.rst | 12 ++++++++++++
> drivers/net/ice/ice_ethdev.c | 11 ++++++++++-
> drivers/net/ice/ice_ethdev.h | 1 +
> drivers/net/ice/ice_rxtx_vec_common.h | 5 +++++
> 4 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst index
> 1a426438d..d1b80c2fa 100644
> --- a/doc/guides/nics/ice.rst
> +++ b/doc/guides/nics/ice.rst
> @@ -80,6 +80,18 @@ Runtime Config Options
>
> -w 80:00.0,pipeline-mode-support=1
>
> +- ``Flow Mark Support`` (default ``0``)
> +
> + This is a hint to the driver to select the data path that support
> + flow mark extraction by default.
> + NOTE: This is an experimental devarg, it will be removed when any of
> + below conditions is ready.
> + 1) all data path support flow mark (currently vPMD does not)
> + 2) a new offload like RTE_DEV_RX_OFFLOAD_FLOW_MARK be introduced
> as a standard way to hint.
> + Example::
> +
> + -w 80:00.0,flow-mark-support=1
> +
> - ``Protocol extraction for per queue``
>
> Configure the RX queues to do protocol extraction into mbuf for protocol
> diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c index
> abf00d404..9f2cb2f40 100644
> --- a/drivers/net/ice/ice_ethdev.c
> +++ b/drivers/net/ice/ice_ethdev.c
> @@ -23,11 +23,13 @@
> /* devargs */
> #define ICE_SAFE_MODE_SUPPORT_ARG "safe-mode-support"
> #define ICE_PIPELINE_MODE_SUPPORT_ARG "pipeline-mode-support"
> +#define ICE_FLOW_MARK_SUPPORT_ARG "flow-mark-support"
> #define ICE_PROTO_XTR_ARG "proto_xtr"
>
> static const char * const ice_valid_args[] = {
> ICE_SAFE_MODE_SUPPORT_ARG,
> ICE_PIPELINE_MODE_SUPPORT_ARG,
> + ICE_FLOW_MARK_SUPPORT_ARG,
> ICE_PROTO_XTR_ARG,
> NULL
> };
> @@ -1987,6 +1989,12 @@ static int ice_parse_devargs(struct rte_eth_dev
> *dev)
>
> ret = rte_kvargs_process(kvlist, ICE_PIPELINE_MODE_SUPPORT_ARG,
> &parse_bool, &ad-
> >devargs.pipe_mode_support);
> + if (ret)
> + goto bail;
> +
> + ret = rte_kvargs_process(kvlist, ICE_FLOW_MARK_SUPPORT_ARG,
> + &parse_bool, &ad-
> >devargs.flow_mark_support);
> + printf("flow_mark = %d\n", ad->devargs.flow_mark_support);
>
> bail:
> rte_kvargs_free(kvlist);
> @@ -4571,7 +4579,8 @@ RTE_PMD_REGISTER_KMOD_DEP(net_ice, "*
> igb_uio | uio_pci_generic | vfio-pci");
> RTE_PMD_REGISTER_PARAM_STRING(net_ice,
> ICE_PROTO_XTR_ARG
> "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp>"
> ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>"
> - ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>");
> + ICE_PIPELINE_MODE_SUPPORT_ARG "=<0|1>"
> + ICE_FLOW_MARK_SUPPORT_ARG "=<0|1>");
>
> RTE_INIT(ice_init_log)
> {
> diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h index
> 4a0d37b32..4d35339a7 100644
> --- a/drivers/net/ice/ice_ethdev.h
> +++ b/drivers/net/ice/ice_ethdev.h
> @@ -391,6 +391,7 @@ struct ice_devargs {
> int safe_mode_support;
> uint8_t proto_xtr_dflt;
> int pipe_mode_support;
> + int flow_mark_support;
> uint8_t proto_xtr[ICE_MAX_QUEUE_NUM];
> };
>
> diff --git a/drivers/net/ice/ice_rxtx_vec_common.h
> b/drivers/net/ice/ice_rxtx_vec_common.h
> index 080ca4175..086428898 100644
> --- a/drivers/net/ice/ice_rxtx_vec_common.h
> +++ b/drivers/net/ice/ice_rxtx_vec_common.h
> @@ -268,6 +268,11 @@ ice_rx_vec_dev_check_default(struct rte_eth_dev
> *dev) {
> int i;
> struct ice_rx_queue *rxq;
> + struct ice_adapter *ad =
> + ICE_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
> +
> + if (ad->devargs.flow_mark_support)
> + return -1;
>
> for (i = 0; i < dev->data->nb_rx_queues; i++) {
> rxq = dev->data->rx_queues[i];
> --
> 2.13.6
Acked-by: Qiming Yang <qiming.yang@intel.com>
next prev parent reply other threads:[~2019-11-18 5:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-18 0:43 Qi Zhang
2019-11-18 5:57 ` Yang, Qiming [this message]
2019-11-19 5:52 ` Ye Xiaolong
2019-11-19 6:03 ` Zhang, Qi Z
2019-11-19 6:08 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F5DF4F0E3AFEF648ADC1C3C33AD4DBF17A5792A6@SHSMSX101.ccr.corp.intel.com \
--to=qiming.yang@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
--cc=yahui.cao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).