DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Xing, Beilei" <beilei.xing@intel.com>
To: Qiming Chen <chenqiming_huawei@163.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2] net/i40e: solve vf vlan strip
Date: Mon, 30 Aug 2021 05:23:16 +0000	[thread overview]
Message-ID: <MN2PR11MB3807D0F778925C8E971EF015F7CB9@MN2PR11MB3807.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20210830020945.2715-1-chenqiming_huawei@163.com>



> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Qiming Chen
> Sent: Monday, August 30, 2021 10:10 AM
> To: dev@dpdk.org
> Cc: Xing, Beilei <beilei.xing@intel.com>; Qiming Chen
> <chenqiming_huawei@163.com>
> Subject: [dpdk-dev] [PATCH v2] net/i40e: solve vf vlan strip
> 
> Kernel PF+DPDK VF mode, after vf adds vlan, the test result shows that the
> vlan received from vf has been stripped.
> 
> The patch solves the problem that the kernel i40e.ko driver strips the vlan by
> default after vf adds vlan. Determine whether to strip vlan through the
> DEV_RX_OFFLOAD_VLAN_STRIP mask bit in rxmode.offload.
> 
> Environmental information:
> 1) dpdk 19.11
> 2) Kernel PF i40e.ko: 2.7.12
> 3) Firmware: 6.01 0x800034a3 1.1747.0

Thanks for the patch.
As Qi mentioned, i40evf will be deprecated. So please don't submit the patch to master repo, but submit to LTS.
Thanks.

> 
> I did not use testpmd to test vlan filter, but write Demo for testing based on
> the following deployment:
> 1) x710 nic, use 2 PFs, each PF virtualizes 1 VF
> 2) 2 pf connected with fiber optic cable
> 3) 2 vf are hard to pass through to the VM
> 4) In vm, dpdk takes over the vf port,
> 5) One port is used as the sending port, and the other port is used as the
> receiving port, e.g. xmit portid is 0, rx portid is 1
> 
> Use the default configuration for port 0 as the sender, and configure port 1
> as the receiving port as follows:
> 1) rte_eth_dev_set_vlan_offload(1, ETH_VLAN_FILTER_OFFLOAD)
> 2) rte_eth_dev_vlan_filter(1, 100, 1)
> 
> Do the following tests:
> Demo constructs a message with vlan 100 to be sent from port 0, and found
> that the vlan header of the message received from port 1 was stripped.
> 
> Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
> ---
> v2:
>   Clear coding style quesion.
> ---
>  drivers/net/i40e/i40e_ethdev_vf.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> b/drivers/net/i40e/i40e_ethdev_vf.c
> index 625981048a..267e7be0c6 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -1852,11 +1852,15 @@ static int
>  i40evf_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)  {
>  	int ret;
> +	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
> 
> -	if (on)
> +	if (on) {
>  		ret = i40evf_add_vlan(dev, vlan_id);
> -	else
> +		if (!(dev_conf->rxmode.offloads &
> DEV_RX_OFFLOAD_VLAN_STRIP))
> +			i40evf_disable_vlan_strip(dev);
> +	} else {
>  		ret = i40evf_del_vlan(dev,vlan_id);
> +	}
> 
>  	return ret;
>  }
> --
> 2.30.1.windows.1


  reply	other threads:[~2021-08-30  5:23 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-30  2:02 [dpdk-dev] [PATCH] " Qiming Chen
2021-08-30  2:09 ` [dpdk-dev] [PATCH v2] " Qiming Chen
2021-08-30  5:23   ` Xing, Beilei [this message]
2021-08-31  4:12     ` Qiming Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MN2PR11MB3807D0F778925C8E971EF015F7CB9@MN2PR11MB3807.namprd11.prod.outlook.com \
    --to=beilei.xing@intel.com \
    --cc=chenqiming_huawei@163.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).