From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id 1B01FA04F0; Thu, 19 Dec 2019 07:41:54 +0100 (CET) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id 0235A1BE8A; Thu, 19 Dec 2019 07:41:53 +0100 (CET) Received: from mx0b-0016f401.pphosted.com (mx0a-0016f401.pphosted.com [67.231.148.174]) by dpdk.org (Postfix) with ESMTP id 6F7881BDFD for ; Thu, 19 Dec 2019 07:41:50 +0100 (CET) Received: from pps.filterd (m0045849.ppops.net [127.0.0.1]) by mx0a-0016f401.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id xBJ6Zq1X009675; Wed, 18 Dec 2019 22:41:46 -0800 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=marvell.com; h=from : to : cc : subject : date : message-id : references : in-reply-to : content-type : mime-version; s=pfpt0818; bh=lBa5J33K6X+3Tnbu4IqUDTLt2HsX4Uif1nmV2ZTgJzE=; b=K0b0c2r0QIJVYsAfgqrvR40+ZTwJtq6xDNlTqsGqRU1j6qiCefczWIbKFZIL2vk/74aB iV4A+RQtAjRJldpCAPl1EJ8HQQy4g+xPs/Gwpg9JRZt9KboUvmHckc9PbsLHipQtMMAh wzAyeXusiep//6VhU4gxXOukaaTB5iFs0ieXTDi4vLlZe/beP8QuOewt8TMUJJrZYzhN kkXg73OgM0uJ8IeZYPt1nqF6md/r5w+aHhfGZib3XIFLn3+CLUOmksVMIkIBkJBSpV/E ZA9FXfesoqrZ/MsSD/MH3bRyTPs32KI5VCXfLl3qe+8jn7zSzX1pmx+bgZIg8p9O/uSv 4g== Received: from sc-exch03.marvell.com ([199.233.58.183]) by mx0a-0016f401.pphosted.com with ESMTP id 2wxneb1wbg-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-SHA384 bits=256 verify=NOT); Wed, 18 Dec 2019 22:41:45 -0800 Received: from SC-EXCH02.marvell.com (10.93.176.82) by SC-EXCH03.marvell.com (10.93.176.83) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Wed, 18 Dec 2019 22:41:43 -0800 Received: from NAM10-DM6-obe.outbound.protection.outlook.com (104.47.58.103) by SC-EXCH02.marvell.com (10.93.176.82) with Microsoft SMTP Server (TLS) id 15.0.1497.2 via Frontend Transport; Wed, 18 Dec 2019 22:41:43 -0800 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=gEkkZJWIGUIk2ZGkLuJgmntxK0qcsqVB9epwHQFALym6j+5ye/LSkw6QkYsVufoAkwRcsoUpZ60i1RtACCKMGe3D2zVwcnEbCu0UUDzGAEV5JiCgGJ2jhiE4wfHNGc6Oj23NaUjScBpzBWKp2xLT1bR5g8DRpLPksF7xPCYGzYDxfC2vzVZbyHENnZ+VFFg2pqnMHT9kbYOfylUOX07kHZ5dtl1RaNAV9wO8JkZbaf+1q/UDBgW9Ha8NmeQZ5OcovgGFTdAdIofBLUw5uCqiq5ZlhVZEdgJ7UqAISNaObVwvTYY+moumWHxPGXtwoRjp/mmKGXPHh0WbjbAEtkoKjw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=lBa5J33K6X+3Tnbu4IqUDTLt2HsX4Uif1nmV2ZTgJzE=; b=AYLXf7jvROCJrZwLOfXt/2n5GwUBADCCON8GuHVlYxP2CU3SErPPbFfwkoyAklSY68MQEg5IFtOj9DWKqnhCYaUZQsVpO40hU6kRtZ98kR9r2qUs5UNtAhXghMId4btw+7GW86CEfK5asl2r1VHh73nW2Lss9PZKksbRRrjyvaorYYHupojeCca7XhvKtAgYqtmZKRIAoftiGMij64yh8HIJuhM2AqOCbFK4AUoYyq9fidmey4ltbgTaoI/jRUOlDW/ToH23mmz5sZ3diA6NShEniUBJVXFhuj7GpzbKasuN+ZCEo4Tfry0xXgk8k21qbZc/qOkSbHwz//t3fG1Znw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=marvell.com; dmarc=pass action=none header.from=marvell.com; dkim=pass header.d=marvell.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=marvell.onmicrosoft.com; s=selector1-marvell-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=lBa5J33K6X+3Tnbu4IqUDTLt2HsX4Uif1nmV2ZTgJzE=; b=Up56V9G2JZqmBuvvRdmC8vr+zCIH9xKNA5Z9AjLbq7HG4UMExeTDe4iojNRSf7oUeRGyI2JFjmnT9Sk8c0z/vvJ0HUq2K28hFoVWFetH6NqCRkFMXbYJCMj8mYbxi1shXmFws8Y9jX0VMYytAYXxeFqVbJ3vnoEvabUn53t/8B0= Received: from MWHPR18MB1376.namprd18.prod.outlook.com (10.173.243.18) by MWHPR18MB1630.namprd18.prod.outlook.com (10.173.246.14) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.2538.20; Thu, 19 Dec 2019 06:41:41 +0000 Received: from MWHPR18MB1376.namprd18.prod.outlook.com ([fe80::24f5:9254:413a:4695]) by MWHPR18MB1376.namprd18.prod.outlook.com ([fe80::24f5:9254:413a:4695%7]) with mapi id 15.20.2559.012; Thu, 19 Dec 2019 06:41:41 +0000 From: Mahipal Challa To: "Gavin Hu (Arm Technology China)" , "dev@dpdk.org" CC: Jerin Jacob Kollanukkaran , "Narayana Prasad Raju Athreya" , Subrahmanyam Nilla , Venkateshwarlu Nalla , nd Thread-Topic: [dpdk-dev] [PATCH v1 2/6] raw/octeontx2_ep: add device configuration Thread-Index: AQHVrnLOtrlj8/GwwEa+52XVsq+Apqe503QAgAcq8cs= Date: Thu, 19 Dec 2019 06:41:41 +0000 Message-ID: References: <1575614365-8907-1-git-send-email-mchalla@marvell.com> <1575614365-8907-3-git-send-email-mchalla@marvell.com>, In-Reply-To: Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [115.113.156.2] x-ms-publictraffictype: Email x-ms-office365-filtering-correlation-id: 3993605b-535b-4326-6e32-08d7844e8198 x-ms-traffictypediagnostic: MWHPR18MB1630: x-ms-exchange-transport-forked: True x-microsoft-antispam-prvs: x-ms-oob-tlc-oobclassifiers: OLM:6430; x-forefront-prvs: 0256C18696 x-forefront-antispam-report: SFV:NSPM; SFS:(10009020)(4636009)(396003)(39850400004)(366004)(136003)(346002)(376002)(199004)(189003)(13464003)(64756008)(66556008)(55236004)(53546011)(6506007)(4326008)(66446008)(7696005)(5660300002)(86362001)(52536014)(76116006)(91956017)(66476007)(66946007)(110136005)(33656002)(81156014)(81166006)(54906003)(30864003)(316002)(55016002)(9686003)(478600001)(19627405001)(8676002)(2906002)(71200400001)(8936002)(186003)(26005)(579004)(559001)(569006); DIR:OUT; SFP:1101; SCL:1; SRVR:MWHPR18MB1630; H:MWHPR18MB1376.namprd18.prod.outlook.com; FPR:; SPF:None; LANG:en; PTR:InfoNoRecords; A:1; MX:1; received-spf: None (protection.outlook.com: marvell.com does not designate permitted sender hosts) x-ms-exchange-senderadcheck: 1 x-microsoft-antispam: BCL:0; x-microsoft-antispam-message-info: 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 MIME-Version: 1.0 X-MS-Exchange-CrossTenant-Network-Message-Id: 3993605b-535b-4326-6e32-08d7844e8198 X-MS-Exchange-CrossTenant-originalarrivaltime: 19 Dec 2019 06:41:41.0441 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 70e1fb47-1155-421d-87fc-2e58f638b6e0 X-MS-Exchange-CrossTenant-mailboxtype: HOSTED X-MS-Exchange-CrossTenant-userprincipalname: R0cudOMTZ079zdLxHMm1Rti88a7dUX55MvpqGXLBW4Wuolyrw+Ect5GUPq4os8oH5ObNqaqi1lDtR7816iTp6w== X-MS-Exchange-Transport-CrossTenantHeadersStamped: MWHPR18MB1630 X-OriginatorOrg: marvell.com X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.95,18.0.572 definitions=2019-12-18_08:2019-12-17,2019-12-18 signatures=0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.15 Subject: Re: [dpdk-dev] [PATCH v1 2/6] raw/octeontx2_ep: add device configuration X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Hi Gavin, Thanks for your suggestions, please see the response inline. ________________________________ From: Gavin Hu (Arm Technology China) Sent: Saturday, December 14, 2019 9:34 PM To: Mahipal Challa ; dev@dpdk.org Cc: Jerin Jacob Kollanukkaran ; Narayana Prasad Raju At= hreya ; Subrahmanyam Nilla ; Venk= ateshwarlu Nalla ; nd Subject: [EXT] RE: [dpdk-dev] [PATCH v1 2/6] raw/octeontx2_ep: add device c= onfiguration External Email ---------------------------------------------------------------------- Hi Mahipal, > -----Original Message----- > From: dev On Behalf Of Mahipal Challa > Sent: Friday, December 6, 2019 2:39 PM > To: dev@dpdk.org > Cc: jerinj@marvell.com; pathreya@marvell.com; snilla@marvell.com; > venkatn@marvell.com > Subject: [dpdk-dev] [PATCH v1 2/6] raw/octeontx2_ep: add device > configuration > > Register "dev_configure" API to configure/initialize the SDP > VF PCIe devices. > > Signed-off-by: Mahipal Challa > --- > doc/guides/rawdevs/octeontx2_ep.rst | 29 ++ > drivers/common/octeontx2/hw/otx2_sdp.h | 184 +++++++++ > drivers/common/octeontx2/otx2_common.c | 9 + > drivers/common/octeontx2/otx2_common.h | 4 + > .../octeontx2/rte_common_octeontx2_version.map | 6 + > drivers/raw/octeontx2_ep/Makefile | 3 + > drivers/raw/octeontx2_ep/meson.build | 4 +- > drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 294 ++++++++++++++ > drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h | 11 + > drivers/raw/octeontx2_ep/otx2_ep_rawdev.c | 148 +++++++ > drivers/raw/octeontx2_ep/otx2_ep_rawdev.h | 434 > ++++++++++++++++++++- > drivers/raw/octeontx2_ep/otx2_ep_vf.c | 408 +++++++++++++++= ++++ > drivers/raw/octeontx2_ep/otx2_ep_vf.h | 10 + > 13 files changed, 1542 insertions(+), 2 deletions(-) > > diff --git a/doc/guides/rawdevs/octeontx2_ep.rst > b/doc/guides/rawdevs/octeontx2_ep.rst > index 5f5ed01..2507fcf 100644 > --- a/doc/guides/rawdevs/octeontx2_ep.rst > +++ b/doc/guides/rawdevs/octeontx2_ep.rst > @@ -39,3 +39,32 @@ entry `sriov_numvfs` for the corresponding PF driver. > > Once the required VFs are enabled, to be accessible from DPDK, VFs need = to > be > bound to vfio-pci driver. > + > +Device Setup > +------------ > + > +The OCTEON TX2 SDP End Point VF devices will need to be bound to a > +user-space IO driver for use. The script ``dpdk-devbind.py`` script > +included with DPDK can be used to view the state of the devices and to b= ind > +them to a suitable DPDK-supported kernel driver. When querying the statu= s > +of the devices, they will appear under the category of "Misc (rawdev) > +devices", i.e. the command ``dpdk-devbind.py --status-dev misc`` can be > +used to see the state of those devices alone. > + > +Device Configuration > +-------------------- > + > +Configuring SDP EP rawdev device is done using the > ``rte_rawdev_configure()`` > +API, which takes the mempool as parameter. PMD uses this pool to > send/receive > +packets to/from the HW. > + > +The following code shows how the device is configured > + > +.. code-block:: c > + > + struct sdp_rawdev_info config =3D {0}; > + struct rte_rawdev_info rdev_info =3D {.dev_private =3D &config}; > + config.enqdeq_mpool =3D (void *)rte_mempool_create(...); > + > + rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info); > + > diff --git a/drivers/common/octeontx2/hw/otx2_sdp.h > b/drivers/common/octeontx2/hw/otx2_sdp.h > new file mode 100644 > index 0000000..7e03317 > --- /dev/null > +++ b/drivers/common/octeontx2/hw/otx2_sdp.h > @@ -0,0 +1,184 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(C) 2019 Marvell International Ltd. > + */ > + > +#ifndef __OTX2_SDP_HW_H_ > +#define __OTX2_SDP_HW_H_ > + > +/* SDP VF IOQs */ > +#define SDP_MIN_RINGS_PER_VF (1) > +#define SDP_MAX_RINGS_PER_VF (8) > + > +/* SDP VF IQ configuration */ > +#define SDP_VF_MAX_IQ_DESCRIPTORS (512) > +#define SDP_VF_MIN_IQ_DESCRIPTORS (128) > + > +#define SDP_VF_DB_MIN (1) > +#define SDP_VF_DB_TIMEOUT (1) > +#define SDP_VF_INTR_THRESHOLD (0xFFFFFFFF) > + > +#define SDP_VF_64BYTE_INSTR (64) > +#define SDP_VF_32BYTE_INSTR (32) > + > +/* SDP VF OQ configuration */ > +#define SDP_VF_MAX_OQ_DESCRIPTORS (512) > +#define SDP_VF_MIN_OQ_DESCRIPTORS (128) > +#define SDP_VF_OQ_BUF_SIZE (2048) > +#define SDP_VF_OQ_REFIL_THRESHOLD (16) > + > +#define SDP_VF_OQ_INFOPTR_MODE (1) > +#define SDP_VF_OQ_BUFPTR_MODE (0) > + > +#define SDP_VF_OQ_INTR_PKT (1) > +#define SDP_VF_OQ_INTR_TIME (10) > +#define SDP_VF_CFG_IO_QUEUES SDP_MAX_RINGS_PER_VF > + > +/* Wait time in milliseconds for FLR */ > +#define SDP_VF_PCI_FLR_WAIT (100) > +#define SDP_VF_BUSY_LOOP_COUNT (10000) > + > +#define SDP_VF_MAX_IO_QUEUES SDP_MAX_RINGS_PER_VF > +#define SDP_VF_MIN_IO_QUEUES SDP_MIN_RINGS_PER_VF > + > +/* SDP VF IOQs per rawdev */ > +#define SDP_VF_MAX_IOQS_PER_RAWDEV SDP_VF_MAX_IO_QUEUES > +#define SDP_VF_DEFAULT_IOQS_PER_RAWDEV SDP_VF_MIN_IO_QUEUES > + > +/* SDP VF Register definitions */ > +#define SDP_VF_RING_OFFSET (0x1ull << 17) > + > +/* SDP VF IQ Registers */ > +#define SDP_VF_R_IN_CONTROL_START (0x10000) > +#define SDP_VF_R_IN_ENABLE_START (0x10010) > +#define SDP_VF_R_IN_INSTR_BADDR_START (0x10020) > +#define SDP_VF_R_IN_INSTR_RSIZE_START (0x10030) > +#define SDP_VF_R_IN_INSTR_DBELL_START (0x10040) > +#define SDP_VF_R_IN_CNTS_START (0x10050) > +#define SDP_VF_R_IN_INT_LEVELS_START (0x10060) > +#define SDP_VF_R_IN_PKT_CNT_START (0x10080) > +#define SDP_VF_R_IN_BYTE_CNT_START (0x10090) > + > +#define SDP_VF_R_IN_CONTROL(ring) \ > + (SDP_VF_R_IN_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_ENABLE(ring) \ > + (SDP_VF_R_IN_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_INSTR_BADDR(ring) \ > + (SDP_VF_R_IN_INSTR_BADDR_START + ((ring) * > SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_INSTR_RSIZE(ring) \ > + (SDP_VF_R_IN_INSTR_RSIZE_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_INSTR_DBELL(ring) \ > + (SDP_VF_R_IN_INSTR_DBELL_START + ((ring) * > SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_CNTS(ring) \ > + (SDP_VF_R_IN_CNTS_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_INT_LEVELS(ring) \ > + (SDP_VF_R_IN_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_PKT_CNT(ring) \ > + (SDP_VF_R_IN_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_IN_BYTE_CNT(ring) \ > + (SDP_VF_R_IN_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +/* SDP VF IQ Masks */ > +#define SDP_VF_R_IN_CTL_RPVF_MASK (0xF) > +#define SDP_VF_R_IN_CTL_RPVF_POS (48) > + > +#define SDP_VF_R_IN_CTL_IDLE (0x1ull << 28) > +#define SDP_VF_R_IN_CTL_RDSIZE (0x3ull << 25) /* Setting to max= (4) > */ > +#define SDP_VF_R_IN_CTL_IS_64B (0x1ull << 24) > +#define SDP_VF_R_IN_CTL_D_NSR (0x1ull << 8) > +#define SDP_VF_R_IN_CTL_D_ESR (0x1ull << 6) > +#define SDP_VF_R_IN_CTL_D_ROR (0x1ull << 5) > +#define SDP_VF_R_IN_CTL_NSR (0x1ull << 3) > +#define SDP_VF_R_IN_CTL_ESR (0x1ull << 1) > +#define SDP_VF_R_IN_CTL_ROR (0x1ull << 0) > + > +#define SDP_VF_R_IN_CTL_MASK \ > + (SDP_VF_R_IN_CTL_RDSIZE | SDP_VF_R_IN_CTL_IS_64B) > + > +/* SDP VF OQ Registers */ > +#define SDP_VF_R_OUT_CNTS_START (0x10100) > +#define SDP_VF_R_OUT_INT_LEVELS_START (0x10110) > +#define SDP_VF_R_OUT_SLIST_BADDR_START (0x10120) > +#define SDP_VF_R_OUT_SLIST_RSIZE_START (0x10130) > +#define SDP_VF_R_OUT_SLIST_DBELL_START (0x10140) > +#define SDP_VF_R_OUT_CONTROL_START (0x10150) > +#define SDP_VF_R_OUT_ENABLE_START (0x10160) > +#define SDP_VF_R_OUT_PKT_CNT_START (0x10180) > +#define SDP_VF_R_OUT_BYTE_CNT_START (0x10190) > + > +#define SDP_VF_R_OUT_CONTROL(ring) \ > + (SDP_VF_R_OUT_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_ENABLE(ring) \ > + (SDP_VF_R_OUT_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_SLIST_BADDR(ring) \ > + (SDP_VF_R_OUT_SLIST_BADDR_START + ((ring) * > SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_SLIST_RSIZE(ring) \ > + (SDP_VF_R_OUT_SLIST_RSIZE_START + ((ring) * > SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_SLIST_DBELL(ring) \ > + (SDP_VF_R_OUT_SLIST_DBELL_START + ((ring) * > SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_CNTS(ring) \ > + (SDP_VF_R_OUT_CNTS_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_INT_LEVELS(ring) \ > + (SDP_VF_R_OUT_INT_LEVELS_START + ((ring) * > SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_PKT_CNT(ring) \ > + (SDP_VF_R_OUT_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +#define SDP_VF_R_OUT_BYTE_CNT(ring) \ > + (SDP_VF_R_OUT_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET)) > + > +/* SDP VF OQ Masks */ > +#define SDP_VF_R_OUT_CTL_IDLE (1ull << 40) > +#define SDP_VF_R_OUT_CTL_ES_I (1ull << 34) > +#define SDP_VF_R_OUT_CTL_NSR_I (1ull << 33) > +#define SDP_VF_R_OUT_CTL_ROR_I (1ull << 32) > +#define SDP_VF_R_OUT_CTL_ES_D (1ull << 30) > +#define SDP_VF_R_OUT_CTL_NSR_D (1ull << 29) > +#define SDP_VF_R_OUT_CTL_ROR_D (1ull << 28) > +#define SDP_VF_R_OUT_CTL_ES_P (1ull << 26) > +#define SDP_VF_R_OUT_CTL_NSR_P (1ull << 25) > +#define SDP_VF_R_OUT_CTL_ROR_P (1ull << 24) > +#define SDP_VF_R_OUT_CTL_IMODE (1ull << 23) > + > +#define SDP_VF_R_OUT_INT_LEVELS_BMODE (1ull << 63) > +#define SDP_VF_R_OUT_INT_LEVELS_TIMET (32) > + > +/* SDP Instruction Header */ > +struct sdp_instr_ih { > + /* Data Len */ > + uint64_t tlen:16; > + > + /* Reserved1 */ > + uint64_t rsvd1:20; > + > + /* PKIND for SDP */ > + uint64_t pkind:6; > + > + /* Front Data size */ > + uint64_t fsz:6; > + > + /* No. of entries in gather list */ > + uint64_t gsz:14; > + > + /* Gather indicator */ > + uint64_t gather:1; > + > + /* Reserved2 */ > + uint64_t rsvd2:1; > +}; > + > +#endif /* __OTX2_SDP_HW_H_ */ > + > diff --git a/drivers/common/octeontx2/otx2_common.c > b/drivers/common/octeontx2/otx2_common.c > index 7e45366..1a257cf 100644 > --- a/drivers/common/octeontx2/otx2_common.c > +++ b/drivers/common/octeontx2/otx2_common.c > @@ -205,6 +205,10 @@ int otx2_npa_lf_obj_ref(void) > * @internal > */ > int otx2_logtype_dpi; > +/** > + * @internal > + */ > +int otx2_logtype_ep; > > RTE_INIT(otx2_log_init); > static void > @@ -245,4 +249,9 @@ int otx2_npa_lf_obj_ref(void) > otx2_logtype_dpi =3D rte_log_register("pmd.raw.octeontx2.dpi"); > if (otx2_logtype_dpi >=3D 0) > rte_log_set_level(otx2_logtype_dpi, RTE_LOG_NOTICE); > + > + otx2_logtype_ep =3D rte_log_register("pmd.raw.octeontx2.ep"); > + if (otx2_logtype_ep >=3D 0) > + rte_log_set_level(otx2_logtype_ep, RTE_LOG_NOTICE); > + > } > diff --git a/drivers/common/octeontx2/otx2_common.h > b/drivers/common/octeontx2/otx2_common.h > index f62c45d..6bc55ca 100644 > --- a/drivers/common/octeontx2/otx2_common.h > +++ b/drivers/common/octeontx2/otx2_common.h > @@ -16,6 +16,7 @@ > #include "hw/otx2_nix.h" > #include "hw/otx2_npc.h" > #include "hw/otx2_npa.h" > +#include "hw/otx2_sdp.h" > #include "hw/otx2_sso.h" > #include "hw/otx2_ssow.h" > #include "hw/otx2_tim.h" > @@ -85,6 +86,7 @@ struct otx2_idev_cfg { > extern int otx2_logtype_tm; > extern int otx2_logtype_tim; > extern int otx2_logtype_dpi; > +extern int otx2_logtype_ep; > > #define otx2_err(fmt, args...) \ > RTE_LOG(ERR, PMD, "%s():%u " fmt "\n", \ > @@ -107,6 +109,7 @@ struct otx2_idev_cfg { > #define otx2_tm_dbg(fmt, ...) otx2_dbg(tm, fmt, ##__VA_ARGS__) > #define otx2_tim_dbg(fmt, ...) otx2_dbg(tim, fmt, ##__VA_ARGS__) > #define otx2_dpi_dbg(fmt, ...) otx2_dbg(dpi, fmt, ##__VA_ARGS__) > +#define otx2_sdp_dbg(fmt, ...) otx2_dbg(ep, fmt, ##__VA_ARGS__) > > /* PCI IDs */ > #define PCI_VENDOR_ID_CAVIUM 0x177D > @@ -121,6 +124,7 @@ struct otx2_idev_cfg { > #define PCI_DEVID_OCTEONTX2_RVU_CPT_VF 0xA0FE > #define PCI_DEVID_OCTEONTX2_RVU_AF_VF 0xA0f8 > #define PCI_DEVID_OCTEONTX2_DPI_VF 0xA081 > +#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON > TX2 EP mode */ > #define PCI_DEVID_OCTEONTX2_RVU_SDP_PF 0xA0f6 > #define PCI_DEVID_OCTEONTX2_RVU_SDP_VF 0xA0f7 > > diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map > b/drivers/common/octeontx2/rte_common_octeontx2_version.map > index adad21a..a51d719 100644 > --- a/drivers/common/octeontx2/rte_common_octeontx2_version.map > +++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map > @@ -33,3 +33,9 @@ DPDK_20.0 { > > local: *; > }; > + > +EXPERIMENTAL { > + global: > + > + otx2_logtype_ep; > +}; > diff --git a/drivers/raw/octeontx2_ep/Makefile > b/drivers/raw/octeontx2_ep/Makefile > index 8cec6bd..02853fb 100644 > --- a/drivers/raw/octeontx2_ep/Makefile > +++ b/drivers/raw/octeontx2_ep/Makefile > @@ -36,5 +36,8 @@ LIBABIVER :=3D 1 > # All source are stored in SRCS-y > # > SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) +=3D > otx2_ep_rawdev.c > +SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) +=3D > otx2_ep_enqdeq.c > +SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) +=3D > otx2_ep_vf.c > + > > include $(RTE_SDK)/mk/rte.lib.mk > diff --git a/drivers/raw/octeontx2_ep/meson.build > b/drivers/raw/octeontx2_ep/meson.build > index e513131..99e6c6d 100644 > --- a/drivers/raw/octeontx2_ep/meson.build > +++ b/drivers/raw/octeontx2_ep/meson.build > @@ -3,4 +3,6 @@ > # > > deps +=3D ['bus_pci', 'common_octeontx2', 'rawdev'] > -sources =3D files('otx2_ep_rawdev.c') > +sources =3D files('otx2_ep_rawdev.c', > + 'otx2_ep_enqdeq.c', > + 'otx2_ep_vf.c') > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c > b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c > new file mode 100644 > index 0000000..8857004 > --- /dev/null > +++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c > @@ -0,0 +1,294 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(C) 2019 Marvell International Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > + > +#include "otx2_common.h" > +#include "otx2_ep_enqdeq.h" > + > +/* IQ initialization */ > +static int > +sdp_init_instr_queue(struct sdp_device *sdpvf, int iq_no) > +{ > + const struct sdp_config *conf; > + struct sdp_instr_queue *iq; > + uint32_t q_size; > + > + conf =3D sdpvf->conf; > + iq =3D sdpvf->instr_queue[iq_no]; > + q_size =3D conf->iq.instr_type * conf->num_iqdef_descs; > + > + /* IQ memory creation for Instruction submission to OCTEON TX2 */ > + iq->iq_mz =3D rte_memzone_reserve_aligned("iqmz", > + q_size, > + rte_socket_id(), > + RTE_MEMZONE_IOVA_CONTIG, > + RTE_CACHE_LINE_SIZE); > + if (iq->iq_mz =3D=3D NULL) { > + otx2_err("IQ[%d] memzone alloc failed", iq_no); > + goto iq_init_fail; > + } > + > + iq->base_addr_dma =3D iq->iq_mz->iova; > + iq->base_addr =3D (uint8_t *)iq->iq_mz->addr; > + > + if (conf->num_iqdef_descs & (conf->num_iqdef_descs - 1)) { > + otx2_err("IQ[%d] descs not in power of 2", iq_no); > + goto iq_init_fail; > + } > + > + iq->nb_desc =3D conf->num_iqdef_descs; > + > + /* Create a IQ request list to hold requests that have been > + * posted to OCTEON TX2. This list will be used for freeing the IQ > + * data buffer(s) later once the OCTEON TX2 fetched the requests. > + */ > + iq->req_list =3D rte_zmalloc_socket("request_list", > + (iq->nb_desc * SDP_IQREQ_LIST_SIZE), > + RTE_CACHE_LINE_SIZE, > + rte_socket_id()); > + if (iq->req_list =3D=3D NULL) { > + otx2_err("IQ[%d] req_list alloc failed", iq_no); > + goto iq_init_fail; > + } > + > + otx2_info("IQ[%d]: base: %p basedma: %lx count: %d", > + iq_no, iq->base_addr, (unsigned long)iq->base_addr_dma= , > + iq->nb_desc); > + > + iq->sdp_dev =3D sdpvf; > + iq->q_no =3D iq_no; > + iq->fill_cnt =3D 0; > + iq->host_write_index =3D 0; > + iq->otx_read_index =3D 0; > + iq->flush_index =3D 0; > + > + /* Initialize the spinlock for this instruction queue */ > + rte_spinlock_init(&iq->lock); > + rte_spinlock_init(&iq->post_lock); > + > + rte_atomic64_clear(&iq->iq_flush_running); > + > + sdpvf->io_qmask.iq |=3D (1ull << iq_no); > + > + /* Set 32B/64B mode for each input queue */ > + if (conf->iq.instr_type =3D=3D 64) > + sdpvf->io_qmask.iq64B |=3D (1ull << iq_no); > + > + iq->iqcmd_64B =3D (conf->iq.instr_type =3D=3D 64); > + > + /* Set up IQ registers */ > + sdpvf->fn_list.setup_iq_regs(sdpvf, iq_no); > + > + return 0; > + > +iq_init_fail: > + return -ENOMEM; > + > +} > + > +int > +sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no) > +{ > + struct sdp_instr_queue *iq; > + > + iq =3D (struct sdp_instr_queue *)rte_zmalloc("sdp_IQ", sizeof(*iq), > + RTE_CACHE_LINE_SIZE); > + if (iq =3D=3D NULL) > + return -ENOMEM; > + > + sdpvf->instr_queue[iq_no] =3D iq; > + > + if (sdp_init_instr_queue(sdpvf, iq_no)) { > + otx2_err("IQ init is failed"); > + goto delete_IQ; > + } > + otx2_info("IQ[%d] is created.", sdpvf->num_iqs); > + > + sdpvf->num_iqs++; > + > + > + return 0; > + > +delete_IQ: > + return -ENOMEM; > +} > + > +static void > +sdp_droq_reset_indices(struct sdp_droq *droq) > +{ > + droq->read_idx =3D 0; > + droq->write_idx =3D 0; > + droq->refill_idx =3D 0; > + droq->refill_count =3D 0; > + rte_atomic64_set(&droq->pkts_pending, 0); > +} > + > +static int > +sdp_droq_setup_ring_buffers(struct sdp_device *sdpvf, > + struct sdp_droq *droq) > +{ > + struct sdp_droq_desc *desc_ring =3D droq->desc_ring; > + uint32_t idx; > + void *buf; > + > + for (idx =3D 0; idx < droq->nb_desc; idx++) { > + rte_mempool_get(sdpvf->enqdeq_mpool, &buf); > + if (buf =3D=3D NULL) { > + otx2_err("OQ buffer alloc failed"); > + /* sdp_droq_destroy_ring_buffers(droq);*/ > + return -ENOMEM; > + } > + > + droq->recv_buf_list[idx].buffer =3D buf; > + droq->info_list[idx].length =3D 0; > + > + /* Map ring buffers into memory */ > + desc_ring[idx].info_ptr =3D (uint64_t)(droq->info_list_dma = + > + (idx * SDP_DROQ_INFO_SIZE)); > + > + desc_ring[idx].buffer_ptr =3D rte_mem_virt2iova(buf); > + } > + > + sdp_droq_reset_indices(droq); > + > + return 0; > +} > + > +static void * > +sdp_alloc_info_buffer(struct sdp_device *sdpvf __rte_unused, > + struct sdp_droq *droq) > +{ > + droq->info_mz =3D rte_memzone_reserve_aligned("OQ_info_list", > + (droq->nb_desc * SDP_DROQ_INFO_SIZE), > + rte_socket_id(), > + RTE_MEMZONE_IOVA_CONTIG, > + RTE_CACHE_LINE_SIZE); > + > + if (droq->info_mz =3D=3D NULL) > + return NULL; > + > + droq->info_list_dma =3D droq->info_mz->iova; > + droq->info_alloc_size =3D droq->info_mz->len; > + droq->info_base_addr =3D (size_t)droq->info_mz->addr; > + > + return droq->info_mz->addr; > +} > + > +/* OQ initialization */ > +static int > +sdp_init_droq(struct sdp_device *sdpvf, uint32_t q_no) > +{ > + const struct sdp_config *conf =3D sdpvf->conf; > + uint32_t c_refill_threshold; > + uint32_t desc_ring_size; > + struct sdp_droq *droq; > + > + otx2_info("OQ[%d] Init start", q_no); > + > + droq =3D sdpvf->droq[q_no]; > + droq->sdp_dev =3D sdpvf; > + droq->q_no =3D q_no; > + > + c_refill_threshold =3D conf->oq.refill_threshold; > + droq->nb_desc =3D conf->num_oqdef_descs; > + droq->buffer_size =3D conf->oqdef_buf_size; > + > + /* OQ desc_ring set up */ > + desc_ring_size =3D droq->nb_desc * SDP_DROQ_DESC_SIZE; > + droq->desc_ring_mz =3D rte_memzone_reserve_aligned("sdp_oqmz", > + desc_ring_size, > + rte_socket_id(), > + > RTE_MEMZONE_IOVA_CONTIG, > + RTE_CACHE_LINE_SIZE); > + > + if (droq->desc_ring_mz =3D=3D NULL) { > + otx2_err("OQ:%d desc_ring allocation failed", q_no); > + goto init_droq_fail; > + } > + > + droq->desc_ring_dma =3D droq->desc_ring_mz->iova; > + droq->desc_ring =3D (struct sdp_droq_desc *)droq->desc_ring_mz- > >addr; > + > + otx2_sdp_dbg("OQ[%d]: desc_ring: virt: 0x%p, dma: %lx", > + q_no, droq->desc_ring, (unsigned long)droq- > >desc_ring_dma); > + otx2_sdp_dbg("OQ[%d]: num_desc: %d", q_no, droq->nb_desc); > + > + > + /* OQ info_list set up */ > + droq->info_list =3D sdp_alloc_info_buffer(sdpvf, droq); > + if (droq->info_list =3D=3D NULL) { > + otx2_err("memory allocation failed for OQ[%d] info_list", > q_no); > + goto init_droq_fail; > + } > + > + /* OQ buf_list set up */ > + droq->recv_buf_list =3D rte_zmalloc_socket("recv_buf_list", > + (droq->nb_desc * > SDP_DROQ_RECVBUF_SIZE), > + RTE_CACHE_LINE_SIZE, rte_socket_id()); > + if (droq->recv_buf_list =3D=3D NULL) { > + otx2_err("OQ recv_buf_list alloc failed"); > + goto init_droq_fail; > + } > + > + if (sdp_droq_setup_ring_buffers(sdpvf, droq)) > + goto init_droq_fail; > + > + droq->refill_threshold =3D c_refill_threshold; > + rte_spinlock_init(&droq->lock); > + > + > + /* Set up OQ registers */ > + sdpvf->fn_list.setup_oq_regs(sdpvf, q_no); > + > + sdpvf->io_qmask.oq |=3D (1ull << q_no); > + > + return 0; > + > +init_droq_fail: > + return -ENOMEM; > +} > + > +/* OQ configuration and setup */ > +int > +sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no) > +{ > + struct sdp_droq *droq; > + > + /* Allocate new droq. */ > + droq =3D (struct sdp_droq *)rte_zmalloc("sdp_OQ", > + sizeof(*droq), RTE_CACHE_LINE_SIZE); > + if (droq =3D=3D NULL) { > + otx2_err("Droq[%d] Creation Failed", oq_no); > + return -ENOMEM; > + } > + sdpvf->droq[oq_no] =3D droq; > + > + if (sdp_init_droq(sdpvf, oq_no)) { > + otx2_err("Droq[%d] Initialization failed", oq_no); > + goto delete_OQ; > + } > + otx2_info("OQ[%d] is created.", oq_no); > + > + sdpvf->num_oqs++; > + > + return 0; > + > +delete_OQ: > + return -ENOMEM; > +} > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h > b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h > new file mode 100644 > index 0000000..4c28283 > --- /dev/null > +++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h > @@ -0,0 +1,11 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(C) 2019 Marvell International Ltd. > + */ > + > +#ifndef _OTX2_EP_ENQDEQ_H_ > +#define _OTX2_EP_ENQDEQ_H_ > + > +#include > +#include "otx2_ep_rawdev.h" > + > +#endif /* _OTX2_EP_ENQDEQ_H_ */ > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c > b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c > index 04b4fac..5db9b50 100644 > --- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c > +++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c > @@ -17,6 +17,7 @@ > > #include "otx2_common.h" > #include "otx2_ep_rawdev.h" > +#include "otx2_ep_vf.h" > > static const struct rte_pci_id pci_sdp_vf_map[] =3D { > { > @@ -28,6 +29,152 @@ > }, > }; > > +/* SDP_VF default configuration */ > +const struct sdp_config default_sdp_conf =3D { > + /* IQ attributes */ > + .iq =3D { > + .max_iqs =3D SDP_VF_CFG_IO_QUEUES, > + .instr_type =3D SDP_VF_64BYTE_INSTR, > + .pending_list_size =3D (SDP_VF_MAX_IQ_DESCRIPTORS * > + SDP_VF_CFG_IO_QUEUES), > + }, > + > + /* OQ attributes */ > + .oq =3D { > + .max_oqs =3D SDP_VF_CFG_IO_QUEUES, > + .info_ptr =3D SDP_VF_OQ_INFOPTR_MODE, > + .refill_threshold =3D SDP_VF_OQ_REFIL_THRESHOLD, > + }, > + > + .num_iqdef_descs =3D SDP_VF_MAX_IQ_DESCRIPTORS, > + .num_oqdef_descs =3D SDP_VF_MAX_OQ_DESCRIPTORS, > + .oqdef_buf_size =3D SDP_VF_OQ_BUF_SIZE, > + > +}; > + > +const struct sdp_config* > +sdp_get_defconf(struct sdp_device *sdp_dev __rte_unused) > +{ > + const struct sdp_config *default_conf =3D NULL; > + > + default_conf =3D &default_sdp_conf; > + > + return default_conf; > +} > + > +static int > +sdp_chip_specific_setup(struct sdp_device *sdpvf) > +{ > + struct rte_pci_device *pdev =3D sdpvf->pci_dev; > + uint32_t dev_id =3D pdev->id.device_id; > + int ret; > + > + switch (dev_id) { > + case PCI_DEVID_OCTEONTX2_EP_VF: > + sdpvf->chip_id =3D PCI_DEVID_OCTEONTX2_EP_VF; > + ret =3D sdp_vf_setup_device(sdpvf); > + > + break; > + default: > + otx2_err("Unsupported device"); > + ret =3D -EINVAL; > + } > + > + if (!ret) > + otx2_info("SDP dev_id[%d]", dev_id); > + > + return ret; > +} > + > +/* SDP VF device initialization */ > +static int > +sdp_vfdev_init(struct sdp_device *sdpvf) > +{ > + uint32_t rawdev_queues, q; > + > + if (sdp_chip_specific_setup(sdpvf)) { > + otx2_err("Chip specific setup failed"); > + goto setup_fail; > + } > + > + if (sdpvf->fn_list.setup_device_regs(sdpvf)) { > + otx2_err("Failed to configure device registers"); > + goto setup_fail; > + } > + > + rawdev_queues =3D (uint32_t)(sdpvf->sriov_info.rings_per_vf); > + > + /* Rawdev queues setup for enqueue/dequeue */ > + for (q =3D 0; q < rawdev_queues; q++) { > + if (sdp_setup_iqs(sdpvf, q)) { > + otx2_err("Failed to setup IQs"); > + goto iq_fail; > + } > + } > + otx2_info("Total[%d] IQs setup", sdpvf->num_iqs); > + > + for (q =3D 0; q < rawdev_queues; q++) { > + if (sdp_setup_oqs(sdpvf, q)) { > + otx2_err("Failed to setup OQs"); > + goto oq_fail; > + } > + } > + otx2_info("Total [%d] OQs setup", sdpvf->num_oqs); > + > + /* Enable IQ/OQ for this device */ > + sdpvf->fn_list.enable_io_queues(sdpvf); > + > + /* Send OQ desc credits for OQs, credits are always > + * sent after the OQs are enabled. > + */ > + for (q =3D 0; q < rawdev_queues; q++) { > + rte_write32(sdpvf->droq[q]->nb_desc, > + sdpvf->droq[q]->pkts_credit_reg); > + > + rte_wmb(); As the barrier is for IO device, so the rte_io_*mb is sufficient. To order a write and a read following, rte_io_mb is required, wmb can order= store/load. /Gavin [Mahipal]: Okay, will replace it with "rte_io_mb()" API. > + otx2_info("OQ[%d] dbells [%d]", q, > + rte_read32(sdpvf->droq[q]->pkts_credit_reg)); > + } > + > + rte_wmb(); > + > + otx2_info("SDP Device is Ready"); > + > + return 0; > + > +oq_fail: > +iq_fail: > +setup_fail: > + return -ENOMEM; > +} > + > +static int > +sdp_rawdev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t > config) > +{ > + struct sdp_rawdev_info *app_info =3D (struct sdp_rawdev_info *)conf= ig; > + struct sdp_device *sdpvf; > + > + if (app_info =3D=3D NULL) { > + otx2_err("Application config info [NULL]"); > + return -EINVAL; > + } > + > + sdpvf =3D (struct sdp_device *)dev->dev_private; > + > + sdpvf->conf =3D app_info->app_conf; > + sdpvf->enqdeq_mpool =3D app_info->enqdeq_mpool; > + > + sdp_vfdev_init(sdpvf); > + > + return 0; > + > +} > + > +/* SDP VF endpoint rawdev ops */ > +static const struct rte_rawdev_ops sdp_rawdev_ops =3D { > + .dev_configure =3D sdp_rawdev_configure, > +}; > + > static int > otx2_sdp_rawdev_probe(struct rte_pci_driver *pci_drv __rte_unused, > struct rte_pci_device *pci_dev) > @@ -66,6 +213,7 @@ > return -ENOMEM; > } > > + sdp_rawdev->dev_ops =3D &sdp_rawdev_ops; > sdp_rawdev->device =3D &pci_dev->device; > sdp_rawdev->driver_name =3D pci_dev->driver->driver.name; > > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h > b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h > index 7ae7a08..bb36b6a 100644 > --- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h > +++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h > @@ -5,17 +5,449 @@ > #ifndef _OTX2_EP_RAWDEV_H_ > #define _OTX2_EP_RAWDEV_H_ > > -#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON TX2 EP mode > */ > +#include > +#include > + > + > +/* Input Request Header format */ > +struct sdp_instr_irh { > + /* Request ID */ > + uint64_t rid:16; > + > + /* PCIe port to use for response */ > + uint64_t pcie_port:3; > + > + /* Scatter indicator 1=3Dscatter */ > + uint64_t scatter:1; > + > + /* Size of Expected result OR no. of entries in scatter list */ > + uint64_t rlenssz:14; > + > + /* Desired destination port for result */ > + uint64_t dport:6; > + > + /* Opcode Specific parameters */ > + uint64_t param:8; > + > + /* Opcode for the return packet */ > + uint64_t opcode:16; > +}; > + > +/* SDP 32B instruction format */ > +struct sdp_instr_32B { > + /* Pointer where the input data is available. */ > + uint64_t dptr; > + > + /* SDP Instruction Header. */ > + uint64_t ih; > + > + /** Pointer where the response for a RAW mode packet > + * will be written by OCTEON TX2. > + */ > + uint64_t rptr; > + > + /* Input Request Header. Additional info about the input. */ > + uint64_t irh; > +}; > +#define SDP_32B_INSTR_SIZE (sizeof(sdp_instr_32B)) > + > +/* SDP 64B instruction format */ > +struct sdp_instr_64B { > + /* Pointer where the input data is available. */ > + uint64_t dptr; > + > + /* SDP Instruction Header. */ > + uint64_t ih; > + > + /** Pointer where the response for a RAW mode packet > + * will be written by OCTEON TX2. > + */ > + uint64_t rptr; > + > + /* Input Request Header. */ > + uint64_t irh; > + > + /* Additional headers available in a 64-byte instruction. */ > + uint64_t exhdr[4]; > +}; > +#define SDP_64B_INSTR_SIZE (sizeof(sdp_instr_64B)) > + > +struct sdp_soft_instr { > + /** Input data pointer. It is either pointing directly to input dat= a > + * or to a gather list. > + */ > + void *dptr; > + > + /** Response from OCTEON TX2 comes at this address. It is either > + * directlty pointing to output data buffer or to a scatter list. > + */ > + void *rptr; > + > + /* The instruction header. All input commands have this field. */ > + struct sdp_instr_ih ih; > + > + /* Input request header. */ > + struct sdp_instr_irh irh; > + > + /** The PCI instruction to be sent to OCTEON TX2. This is stored in= the > + * instr to retrieve the physical address of buffers when instr is > + * freed. > + */ > + struct sdp_instr_64B command; > + > + /** If a gather list was allocated, this ptr points to the buffer u= sed > + * for the gather list. The gather list has to be 8B aligned, so t= his > + * value may be different from dptr. > + */ > + void *gather_ptr; > + > + /* Total data bytes transferred in the gather mode request. */ > + uint64_t gather_bytes; > + > + /** If a scatter list was allocated, this ptr points to the buffer = used > + * for the scatter list. The scatter list has to be 8B aligned, so > + * this value may be different from rptr. > + */ > + void *scatter_ptr; > + > + /* Total data bytes to be received in the scatter mode request. */ > + uint64_t scatter_bytes; > + > + /* IQ number to which this instruction has to be submitted. */ > + uint32_t q_no; > + > + /* IQ instruction request type. */ > + uint32_t reqtype; > +}; > +#define SDP_SOFT_INSTR_SIZE (sizeof(sdp_soft_instr)) > + > +/* SDP IQ request list */ > +struct sdp_instr_list { > + void *buf; > + uint32_t reqtype; > +}; > +#define SDP_IQREQ_LIST_SIZE (sizeof(struct sdp_instr_list)) > + > +/* Structure to define the configuration attributes for each Input queue= . */ > +struct sdp_iq_config { > + /* Max number of IQs available */ > + uint16_t max_iqs; > + > + /* Command size - 32 or 64 bytes */ > + uint16_t instr_type; > + > + /* Pending list size, usually set to the sum of the size of all IQs= */ > + uint32_t pending_list_size; > +}; > + > +/** The instruction (input) queue. > + * The input queue is used to post raw (instruction) mode data or packe= t > data > + * to OCTEON TX2 device from the host. Each IQ of a SDP EP VF device ha= s > one > + * such structure to represent it. > + */ > +struct sdp_instr_queue { > + /* A spinlock to protect access to the input ring. */ > + rte_spinlock_t lock; > + rte_spinlock_t post_lock; > + > + struct sdp_device *sdp_dev; > + rte_atomic64_t iq_flush_running; > + > + uint32_t q_no; > + uint32_t pkt_in_done; > + > + /* Flag for 64 byte commands. */ > + uint32_t iqcmd_64B:1; > + uint32_t rsvd:17; > + uint32_t status:8; > + > + /* Number of descriptors in this ring. */ > + uint32_t nb_desc; > + > + /* Input ring index, where the driver should write the next packet = */ > + uint32_t host_write_index; > + > + /* Input ring index, where the OCTEON TX2 should read the next > packet */ > + uint32_t otx_read_index; > + > + /** This index aids in finding the window in the queue where OCTEON > TX2 > + * has read the commands. > + */ > + uint32_t flush_index; > + > + /* This keeps track of the instructions pending in this queue. */ > + rte_atomic64_t instr_pending; > + > + uint32_t reset_instr_cnt; > + > + /* Pointer to the Virtual Base addr of the input ring. */ > + uint8_t *base_addr; > + > + /* This IQ request list */ > + struct sdp_instr_list *req_list; > + > + /* SDP doorbell register for the ring. */ > + void *doorbell_reg; > + > + /* SDP instruction count register for this ring. */ > + void *inst_cnt_reg; > + > + /* Number of instructions pending to be posted to OCTEON TX2. */ > + uint32_t fill_cnt; > + > + /* DMA mapped base address of the input descriptor ring. */ > + uint64_t base_addr_dma; > + > + /* Memory zone */ > + const struct rte_memzone *iq_mz; > +}; > + > +/* DROQ packet format for application i/f. */ > +struct sdp_droq_pkt { > + /* DROQ packet data buffer pointer. */ > + uint8_t *data; > + > + /* DROQ packet data length */ > + uint32_t len; > + > + uint32_t misc; > +}; > + > +/** Descriptor format. > + * The descriptor ring is made of descriptors which have 2 64-bit value= s: > + * -# Physical (bus) address of the data buffer. > + * -# Physical (bus) address of a sdp_droq_info structure. > + * The device DMA's incoming packets and its information at the address > + * given by these descriptor fields. > + */ > +struct sdp_droq_desc { > + /* The buffer pointer */ > + uint64_t buffer_ptr; > + > + /* The Info pointer */ > + uint64_t info_ptr; > +}; > +#define SDP_DROQ_DESC_SIZE (sizeof(struct sdp_droq_desc)) > + > +/* Receive Header */ > +union sdp_rh { > + uint64_t rh64; > +}; > +#define SDP_RH_SIZE (sizeof(union sdp_rh)) > + > +/** Information about packet DMA'ed by OCTEON TX2. > + * The format of the information available at Info Pointer after OCTEON= TX2 > + * has posted a packet. Not all descriptors have valid information. Onl= y > + * the Info field of the first descriptor for a packet has information > + * about the packet. > + */ > +struct sdp_droq_info { > + /* The Output Receive Header. */ > + union sdp_rh rh; > + > + /* The Length of the packet. */ > + uint64_t length; > +}; > +#define SDP_DROQ_INFO_SIZE (sizeof(struct sdp_droq_info)) > + > +/** Pointer to data buffer. > + * Driver keeps a pointer to the data buffer that it made available to > + * the OCTEON TX2 device. Since the descriptor ring keeps physical (bus= ) > + * addresses, this field is required for the driver to keep track of > + * the virtual address pointers. > + */ > +struct sdp_recv_buffer { > + /* Packet buffer, including meta data. */ > + void *buffer; > + > + /* Data in the packet buffer. */ > + /* uint8_t *data; */ > +}; > +#define SDP_DROQ_RECVBUF_SIZE (sizeof(struct sdp_recv_buffer)) > + > +/* Structure to define the configuration attributes for each Output queu= e. */ > +struct sdp_oq_config { > + /* Max number of OQs available */ > + uint16_t max_oqs; > + > + /* If set, the Output queue uses info-pointer mode. (Default: 1 ) *= / > + uint16_t info_ptr; > + > + /** The number of buffers that were consumed during packet > processing by > + * the driver on this Output queue before the driver attempts to > + * replenish the descriptor ring with new buffers. > + */ > + uint32_t refill_threshold; > +}; > + > +/* The Descriptor Ring Output Queue(DROQ) structure. */ > +struct sdp_droq { > + /* A spinlock to protect access to this ring. */ > + rte_spinlock_t lock; > + > + struct sdp_device *sdp_dev; > + /* The 8B aligned descriptor ring starts at this address. */ > + struct sdp_droq_desc *desc_ring; > + > + uint32_t q_no; > + uint32_t last_pkt_count; > + > + /* Driver should read the next packet at this index */ > + uint32_t read_idx; > + > + /* OCTEON TX2 will write the next packet at this index */ > + uint32_t write_idx; > + > + /* At this index, the driver will refill the descriptor's buffer */ > + uint32_t refill_idx; > + > + /* Packets pending to be processed */ > + rte_atomic64_t pkts_pending; > + > + /* Number of descriptors in this ring. */ > + uint32_t nb_desc; > + > + /* The number of descriptors pending to refill. */ > + uint32_t refill_count; > + > + uint32_t refill_threshold; > + > + /* The 8B aligned info ptrs begin from this address. */ > + struct sdp_droq_info *info_list; > + > + /* receive buffer list contains virtual addresses of the buffers. *= / > + struct sdp_recv_buffer *recv_buf_list; > + > + /* The size of each buffer pointed by the buffer pointer. */ > + uint32_t buffer_size; > + > + /** Pointer to the mapped packet credit register. > + * Host writes number of info/buffer ptrs available to this regist= er > + */ > + void *pkts_credit_reg; > + > + /** Pointer to the mapped packet sent register. OCTEON TX2 writes > the > + * number of packets DMA'ed to host memory in this register. > + */ > + void *pkts_sent_reg; > + > + /* DMA mapped address of the DROQ descriptor ring. */ > + size_t desc_ring_dma; > + > + /* Info_ptr list is allocated at this virtual address. */ > + size_t info_base_addr; > + > + /* DMA mapped address of the info list */ > + size_t info_list_dma; > + > + /* Allocated size of info list. */ > + uint32_t info_alloc_size; > + > + /* Memory zone **/ > + const struct rte_memzone *desc_ring_mz; > + const struct rte_memzone *info_mz; > +}; > +#define SDP_DROQ_SIZE (sizeof(struct sdp_droq)) > + > +/* IQ/OQ mask */ > +struct sdp_io_enable { > + uint64_t iq; > + uint64_t oq; > + uint64_t iq64B; > +}; > + > +/* Structure to define the configuration. */ > +struct sdp_config { > + /* Input Queue attributes. */ > + struct sdp_iq_config iq; > + > + /* Output Queue attributes. */ > + struct sdp_oq_config oq; > + > + /* Num of desc for IQ rings */ > + uint32_t num_iqdef_descs; > + > + /* Num of desc for OQ rings */ > + uint32_t num_oqdef_descs; > + > + /* OQ buffer size */ > + uint32_t oqdef_buf_size; > +}; > + > +/* Required functions for each VF device */ > +struct sdp_fn_list { > + void (*setup_iq_regs)(struct sdp_device *sdpvf, uint32_t q_no); > + void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no); > + int (*setup_device_regs)(struct sdp_device *sdpvf); > + void (*enable_io_queues)(struct sdp_device *sdpvf); > + void (*enable_iq)(struct sdp_device *sdpvf, uint32_t q_no); > + void (*enable_oq)(struct sdp_device *sdpvf, uint32_t q_no); > +}; > + > +/* SRIOV information */ > +struct sdp_sriov_info { > + /* Number of rings assigned to VF */ > + uint32_t rings_per_vf; > + > + /* Number of VF devices enabled */ > + uint32_t num_vfs; > +}; > + > + > +/* Information to be passed from application */ > +struct sdp_rawdev_info { > + struct rte_mempool *enqdeq_mpool; > + const struct sdp_config *app_conf; > +}; > > /* SDP EP VF device */ > struct sdp_device { > /* PCI device pointer */ > struct rte_pci_device *pci_dev; > + uint16_t chip_id; > + uint16_t pf_num; > uint16_t vf_num; > > + /* This device's PCIe port used for traffic. */ > + uint16_t pcie_port; > + uint32_t pkind; > + > + /* The state of this device */ > + rte_atomic64_t status; > + > /* Memory mapped h/w address */ > uint8_t *hw_addr; > > + struct sdp_fn_list fn_list; > + > + /* Num IQs */ > + uint32_t num_iqs; > + > + /* The input instruction queues */ > + struct sdp_instr_queue > *instr_queue[SDP_VF_MAX_IOQS_PER_RAWDEV]; > + > + /* Num OQs */ > + uint32_t num_oqs; > + > + /* The DROQ output queues */ > + struct sdp_droq *droq[SDP_VF_MAX_IOQS_PER_RAWDEV]; > + > + /* IOQ data buffer pool */ > + struct rte_mempool *enqdeq_mpool; > + > + /* IOQ mask */ > + struct sdp_io_enable io_qmask; > + > + /* SR-IOV info */ > + struct sdp_sriov_info sriov_info; > + > + /* Device configuration */ > + const struct sdp_config *conf; > }; > > +const struct sdp_config *sdp_get_defconf(struct sdp_device *sdp_dev); > +int sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no); > + > +int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no); > + > #endif /* _OTX2_EP_RAWDEV_H_ */ > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c > b/drivers/raw/octeontx2_ep/otx2_ep_vf.c > new file mode 100644 > index 0000000..b6120eb > --- /dev/null > +++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c > @@ -0,0 +1,408 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(C) 2019 Marvell International Ltd. > + */ > + > +#include > +#include > +#include > + > +#include "otx2_common.h" > +#include "otx2_ep_rawdev.h" > +#include "otx2_ep_vf.h" > + > +static int > +sdp_vf_reset_iq(struct sdp_device *sdpvf, int q_no) > +{ > + uint64_t loop =3D SDP_VF_BUSY_LOOP_COUNT; > + volatile uint64_t d64 =3D 0ull; > + > + /* There is no RST for a ring. > + * Clear all registers one by one after disabling the ring > + */ > + > + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no)); > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_IN_INSTR_BADDR(q_no)); > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_IN_INSTR_RSIZE(q_no)); > + > + d64 =3D 0xFFFFFFFF; /* ~0ull */ > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_IN_INSTR_DBELL(q_no)); > + d64 =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_IN_INSTR_DBELL(q_no)); > + > + while ((d64 !=3D 0) && loop--) { > + otx2_write64(d64, sdpvf->hw_addr + > + SDP_VF_R_IN_INSTR_DBELL(q_no)); > + > + rte_delay_ms(1); > + > + d64 =3D otx2_read64(sdpvf->hw_addr + > + SDP_VF_R_IN_INSTR_DBELL(q_no)); > + } > + > + loop =3D SDP_VF_BUSY_LOOP_COUNT; > + d64 =3D otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no)); > + while ((d64 !=3D 0) && loop--) { > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_IN_CNTS(q_no)); > + > + rte_delay_ms(1); > + > + d64 =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_IN_CNTS(q_no)); > + } > + > + d64 =3D 0ull; > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_IN_INT_LEVELS(q_no)); > + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_PKT_CNT(q_no)); > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_IN_BYTE_CNT(q_no)); > + > + return 0; > +} > + > +static int > +sdp_vf_reset_oq(struct sdp_device *sdpvf, int q_no) > +{ > + uint64_t loop =3D SDP_VF_BUSY_LOOP_COUNT; > + volatile uint64_t d64 =3D 0ull; > + > + otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no)); > + > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_OUT_SLIST_BADDR(q_no)); > + > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_OUT_SLIST_RSIZE(q_no)); > + > + d64 =3D 0xFFFFFFFF; > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_OUT_SLIST_DBELL(q_no)); > + d64 =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_OUT_SLIST_DBELL(q_no)); > + > + while ((d64 !=3D 0) && loop--) { > + otx2_write64(d64, sdpvf->hw_addr + > + SDP_VF_R_OUT_SLIST_DBELL(q_no)); > + > + rte_delay_ms(1); > + > + d64 =3D otx2_read64(sdpvf->hw_addr + > + SDP_VF_R_OUT_SLIST_DBELL(q_no)); > + } > + > + loop =3D SDP_VF_BUSY_LOOP_COUNT; > + d64 =3D otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no)); > + while ((d64 !=3D 0) && (loop--)) { > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_OUT_CNTS(q_no)); > + > + rte_delay_ms(1); > + > + d64 =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_OUT_CNTS(q_no)); > + } > + > + d64 =3D 0ull; > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_OUT_INT_LEVELS(q_no)); > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_OUT_PKT_CNT(q_no)); > + otx2_write64(d64, sdpvf->hw_addr + > SDP_VF_R_OUT_BYTE_CNT(q_no)); > + > + return 0; > +} > + > +static void > +sdp_vf_setup_global_iq_reg(struct sdp_device *sdpvf, int q_no) > +{ > + volatile uint64_t reg_val =3D 0ull; > + > + /* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for IQs > + * IS_64B is by default enabled. > + */ > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_IN_CONTROL(q_no)); > + > + reg_val |=3D SDP_VF_R_IN_CTL_RDSIZE; > + reg_val |=3D SDP_VF_R_IN_CTL_IS_64B; > + reg_val |=3D SDP_VF_R_IN_CTL_ESR; > + > + otx2_write64(reg_val, sdpvf->hw_addr + > SDP_VF_R_IN_CONTROL(q_no)); > + > +} > + > +static void > +sdp_vf_setup_global_oq_reg(struct sdp_device *sdpvf, int q_no) > +{ > + volatile uint64_t reg_val =3D 0ull; > + > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_OUT_CONTROL(q_no)); > + > + reg_val |=3D (SDP_VF_R_OUT_CTL_IMODE); > + > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_ROR_P); > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_NSR_P); > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_ROR_I); > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_NSR_I); > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_ES_I); > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_ROR_D); > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_NSR_D); > + reg_val &=3D ~(SDP_VF_R_OUT_CTL_ES_D); > + > + /* INFO/DATA ptr swap is required */ > + reg_val |=3D (SDP_VF_R_OUT_CTL_ES_P); > + > + otx2_write64(reg_val, sdpvf->hw_addr + > SDP_VF_R_OUT_CONTROL(q_no)); > + > +} > + > +static int > +sdp_vf_reset_input_queues(struct sdp_device *sdpvf) > +{ > + uint32_t q_no =3D 0; > + > + otx2_sdp_dbg("%s :", __func__); > + > + for (q_no =3D 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++) > + sdp_vf_reset_iq(sdpvf, q_no); > + > + return 0; > +} > + > +static int > +sdp_vf_reset_output_queues(struct sdp_device *sdpvf) > +{ > + uint64_t q_no =3D 0ull; > + > + otx2_sdp_dbg(" %s :", __func__); > + > + for (q_no =3D 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++) > + sdp_vf_reset_oq(sdpvf, q_no); > + > + return 0; > +} > + > +static void > +sdp_vf_setup_global_input_regs(struct sdp_device *sdpvf) > +{ > + uint64_t q_no =3D 0ull; > + > + sdp_vf_reset_input_queues(sdpvf); > + > + for (q_no =3D 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++) > + sdp_vf_setup_global_iq_reg(sdpvf, q_no); > +} > + > +static void > +sdp_vf_setup_global_output_regs(struct sdp_device *sdpvf) > +{ > + uint32_t q_no; > + > + sdp_vf_reset_output_queues(sdpvf); > + > + for (q_no =3D 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++) > + sdp_vf_setup_global_oq_reg(sdpvf, q_no); > + > +} > + > +static int > +sdp_vf_setup_device_regs(struct sdp_device *sdpvf) > +{ > + sdp_vf_setup_global_input_regs(sdpvf); > + sdp_vf_setup_global_output_regs(sdpvf); > + > + return 0; > +} > + > +static void > +sdp_vf_setup_iq_regs(struct sdp_device *sdpvf, uint32_t iq_no) > +{ > + struct sdp_instr_queue *iq =3D sdpvf->instr_queue[iq_no]; > + volatile uint64_t reg_val =3D 0ull; > + > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_IN_CONTROL(iq_no)); > + > + /* Wait till IDLE to set to 1, not supposed to configure BADDR > + * as long as IDLE is 0 > + */ > + if (!(reg_val & SDP_VF_R_IN_CTL_IDLE)) { > + do { > + reg_val =3D otx2_read64(sdpvf->hw_addr + > + SDP_VF_R_IN_CONTROL(iq_no)); > + } while (!(reg_val & SDP_VF_R_IN_CTL_IDLE)); > + } > + > + /* Write the start of the input queue's ring and its size */ > + otx2_write64(iq->base_addr_dma, sdpvf->hw_addr + > + SDP_VF_R_IN_INSTR_BADDR(iq_no)); > + otx2_write64(iq->nb_desc, sdpvf->hw_addr + > + SDP_VF_R_IN_INSTR_RSIZE(iq_no)); > + > + /* Remember the doorbell & instruction count register addr > + * for this queue > + */ > + iq->doorbell_reg =3D (uint8_t *) sdpvf->hw_addr + > + SDP_VF_R_IN_INSTR_DBELL(iq_no); > + iq->inst_cnt_reg =3D (uint8_t *) sdpvf->hw_addr + > + SDP_VF_R_IN_CNTS(iq_no); > + > + otx2_sdp_dbg("InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p", > + iq_no, iq->doorbell_reg, iq->inst_cnt_reg); > + > + /* Store the current instrn counter(used in flush_iq calculation) *= / > + iq->reset_instr_cnt =3D rte_read32(iq->inst_cnt_reg); > + > + /* IN INTR_THRESHOLD is set to max(FFFFFFFF) which disable the IN > INTR > + * to raise > + */ > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_IN_INT_LEVELS(iq_no)); > + reg_val =3D 0xffffffff; > + > + otx2_write64(reg_val, sdpvf->hw_addr + > SDP_VF_R_IN_INT_LEVELS(iq_no)); > + > +} > + > +static void > +sdp_vf_setup_oq_regs(struct sdp_device *sdpvf, uint32_t oq_no) > +{ > + volatile uint64_t reg_val =3D 0ull; > + uint64_t oq_ctl =3D 0ull; > + > + struct sdp_droq *droq =3D sdpvf->droq[oq_no]; > + > + /* Wait on IDLE to set to 1, supposed to configure BADDR > + * as log as IDLE is 0 > + */ > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_OUT_CONTROL(oq_no)); > + > + while (!(reg_val & SDP_VF_R_OUT_CTL_IDLE)) { > + reg_val =3D otx2_read64(sdpvf->hw_addr + > + SDP_VF_R_OUT_CONTROL(oq_no)); > + } > + > + otx2_write64(droq->desc_ring_dma, sdpvf->hw_addr + > + SDP_VF_R_OUT_SLIST_BADDR(oq_no)); > + otx2_write64(droq->nb_desc, sdpvf->hw_addr + > + SDP_VF_R_OUT_SLIST_RSIZE(oq_no)); > + > + oq_ctl =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_OUT_CONTROL(oq_no)); > + > + /* Clear the ISIZE and BSIZE (22-0) */ > + oq_ctl &=3D ~(0x7fffffull); > + > + /* Populate the BSIZE (15-0) */ > + oq_ctl |=3D (droq->buffer_size & 0xffff); > + > + /* Populate ISIZE(22-16) */ > + oq_ctl |=3D ((SDP_RH_SIZE << 16) & 0x7fffff); > + otx2_write64(oq_ctl, sdpvf->hw_addr + > SDP_VF_R_OUT_CONTROL(oq_no)); > + > + /* Mapped address of the pkt_sent and pkts_credit regs */ > + droq->pkts_sent_reg =3D (uint8_t *) sdpvf->hw_addr + > + SDP_VF_R_OUT_CNTS(oq_no); > + droq->pkts_credit_reg =3D (uint8_t *) sdpvf->hw_addr + > + SDP_VF_R_OUT_SLIST_DBELL(oq_no); > + > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_OUT_INT_LEVELS(oq_no)); > + > + /* Clear PKT_CNT register */ > + rte_write64(0xFFFFFFFFF, (uint8_t *)sdpvf->hw_addr + > + SDP_VF_R_OUT_PKT_CNT(oq_no)); > + > + /* Clear the OQ doorbell */ > + rte_write32(0xFFFFFFFF, droq->pkts_credit_reg); > + while ((rte_read32(droq->pkts_credit_reg) !=3D 0ull)) { > + rte_write32(0xFFFFFFFF, droq->pkts_credit_reg); > + rte_delay_ms(1); > + } > + otx2_sdp_dbg("SDP_R[%d]_credit:%x", oq_no, > + rte_read32(droq->pkts_credit_reg)); > + > + /* Clear the OQ_OUT_CNTS doorbell */ > + reg_val =3D rte_read32(droq->pkts_sent_reg); > + rte_write32((uint32_t)reg_val, droq->pkts_sent_reg); > + > + otx2_sdp_dbg("SDP_R[%d]_sent: %x", oq_no, > + rte_read32(droq->pkts_sent_reg)); > + > + while (((rte_read32(droq->pkts_sent_reg)) !=3D 0ull)) { > + reg_val =3D rte_read32(droq->pkts_sent_reg); > + rte_write32((uint32_t)reg_val, droq->pkts_sent_reg); > + rte_delay_ms(1); > + } > + > +} > + > +static void > +sdp_vf_enable_iq(struct sdp_device *sdpvf, uint32_t q_no) > +{ > + volatile uint64_t reg_val =3D 0ull; > + uint64_t loop =3D SDP_VF_BUSY_LOOP_COUNT; > + > + /* Resetting doorbells during IQ enabling also to handle abrupt > + * guest reboot. IQ reset does not clear the doorbells. > + */ > + otx2_write64(0xFFFFFFFF, sdpvf->hw_addr + > + SDP_VF_R_IN_INSTR_DBELL(q_no)); > + > + while (((otx2_read64(sdpvf->hw_addr + > + SDP_VF_R_IN_INSTR_DBELL(q_no))) !=3D 0ull) && loop--) { > + > + rte_delay_ms(1); > + } > + > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_IN_ENABLE(q_no)); > + reg_val |=3D 0x1ull; > + > + otx2_write64(reg_val, sdpvf->hw_addr + > SDP_VF_R_IN_ENABLE(q_no)); > + > + otx2_info("IQ[%d] enable done", q_no); > + > +} > + > +static void > +sdp_vf_enable_oq(struct sdp_device *sdpvf, uint32_t q_no) > +{ > + volatile uint64_t reg_val =3D 0ull; > + > + reg_val =3D otx2_read64(sdpvf->hw_addr + > SDP_VF_R_OUT_ENABLE(q_no)); > + reg_val |=3D 0x1ull; > + otx2_write64(reg_val, sdpvf->hw_addr + > SDP_VF_R_OUT_ENABLE(q_no)); > + > + otx2_info("OQ[%d] enable done", q_no); > +} > + > +static void > +sdp_vf_enable_io_queues(struct sdp_device *sdpvf) > +{ > + uint32_t q_no =3D 0; > + > + for (q_no =3D 0; q_no < sdpvf->num_iqs; q_no++) > + sdp_vf_enable_iq(sdpvf, q_no); > + > + for (q_no =3D 0; q_no < sdpvf->num_oqs; q_no++) > + sdp_vf_enable_oq(sdpvf, q_no); > +} > + > +int > +sdp_vf_setup_device(struct sdp_device *sdpvf) > +{ > + uint64_t reg_val =3D 0ull; > + > + /* If application doesn't provide its conf, use driver default conf= */ > + if (sdpvf->conf =3D=3D NULL) { > + sdpvf->conf =3D sdp_get_defconf(sdpvf); > + if (sdpvf->conf =3D=3D NULL) { > + otx2_err("SDP VF default config not found"); > + return -ENOMEM; > + } > + otx2_info("Default config is used"); > + } > + > + /* Get IOQs (RPVF] count */ > + reg_val =3D otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(0)); > + > + sdpvf->sriov_info.rings_per_vf =3D ((reg_val >> > SDP_VF_R_IN_CTL_RPVF_POS) > + & SDP_VF_R_IN_CTL_RPVF_MASK); > + > + otx2_info("SDP RPVF: %d", sdpvf->sriov_info.rings_per_vf); > + > + sdpvf->fn_list.setup_iq_regs =3D sdp_vf_setup_iq_regs; > + sdpvf->fn_list.setup_oq_regs =3D sdp_vf_setup_oq_regs; > + sdpvf->fn_list.setup_device_regs =3D sdp_vf_setup_device_regs; > + sdpvf->fn_list.enable_io_queues =3D sdp_vf_enable_io_queues; > + sdpvf->fn_list.enable_iq =3D sdp_vf_enable_iq; > + sdpvf->fn_list.enable_oq =3D sdp_vf_enable_oq; > + > + > + return 0; > + > +} > + > diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.h > b/drivers/raw/octeontx2_ep/otx2_ep_vf.h > new file mode 100644 > index 0000000..974f856 > --- /dev/null > +++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.h > @@ -0,0 +1,10 @@ > +/* SPDX-License-Identifier: BSD-3-Clause > + * Copyright(C) 2019 Marvell International Ltd. > + */ > +#ifndef _OTX2_EP_VF_H_ > +#define _OTX2_EP_VF_H_ > +int > +sdp_vf_setup_device(struct sdp_device *sdpvf); > + > +#endif /*_OTX2_EP_VF_H_ */ > + > -- > 1.8.3.1 Thanks, Mahipal