From: "Gujjar, Abhinandan S" <abhinandan.gujjar@intel.com>
To: Jerin Jacob <jerinjacobk@gmail.com>,
Shijith Thotton <sthotton@marvell.com>
Cc: dpdk-dev <dev@dpdk.org>, Jerin Jacob <jerinj@marvell.com>,
Anoob Joseph <anoobj@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>,
Akhil Goyal <gakhil@marvell.com>
Subject: RE: [PATCH v3] app/eventdev: add crypto producer mode
Date: Sun, 23 Jan 2022 16:56:44 +0000 [thread overview]
Message-ID: <PH0PR11MB48248914B263D35CEE60671BE85D9@PH0PR11MB4824.namprd11.prod.outlook.com> (raw)
In-Reply-To: <CALBAE1OnE-ObksBTPjwPL-koPp=RG2z5JSxPqagav=TA9uKWLg@mail.gmail.com>
Hi Jerin,
> -----Original Message-----
> From: Jerin Jacob <jerinjacobk@gmail.com>
> Sent: Friday, January 21, 2022 5:55 PM
> To: Shijith Thotton <sthotton@marvell.com>
> Cc: dpdk-dev <dev@dpdk.org>; Jerin Jacob <jerinj@marvell.com>; Anoob
> Joseph <anoobj@marvell.com>; Pavan Nikhilesh
> <pbhagavatula@marvell.com>; Akhil Goyal <gakhil@marvell.com>; Gujjar,
> Abhinandan S <abhinandan.gujjar@intel.com>
> Subject: Re: [PATCH v3] app/eventdev: add crypto producer mode
>
> On Tue, Jan 4, 2022 at 4:04 PM Shijith Thotton <sthotton@marvell.com>
> wrote:
> >
> > In crypto producer mode, producer core enqueues cryptodev with
> > software generated crypto ops and worker core dequeues crypto
> > completion events from the eventdev. Event crypto metadata used for
> > above processing is pre-populated in each crypto session.
> >
> > Parameter --prod_type_cryptodev can be used to enable crypto producer
> > mode. Parameter --crypto_adptr_mode can be set to select the crypto
> > adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.
> >
> > This mode can be used to measure the performance of crypto adapter.
> >
> > Example:
> > ./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
> > --prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
> > --stlist=a --wlcores 1 --plcores 2
> >
> > Signed-off-by: Shijith Thotton <sthotton@marvell.com>
> > ---
> > v3:
> > * Reduce dereference inside loop.
>
> Hi @Gujjar, Abhinandan S
>
> Do you have any comments or objections to merging this change?
I am trying to get the app working on my sandbox. I have few comments for Shijith.
@Shijith Thotton, After trying with openssl cryptodev, I tried with cryptodev_null pmd to get the app working.
It throws an error here too:
root@abhi-VirtualBox:/XDP/DPDK_GIT/dpdk-next-eventdev/abhi# ./app/dpdk-test-eventdev -l 0-2 --vdev=event_sw0 --vdev="crypto_null" -- --prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_queue --stlist=a --wlcores 1 --plcores 2
EAL: Detected CPU lcores: 4
EAL: Detected NUMA nodes: 1
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: VFIO support initialized
CRYPTODEV: Creating cryptodev crypto_null
CRYPTODEV: Initialisation parameters - name: crypto_null,socket id: 0, max queue pairs: 8
TELEMETRY: No legacy callbacks, legacy socket not created
driver : event_sw
test : perf_queue
dev : 0
verbose_level : 1
socket_id : -1
pool_sz : 16384
main lcore : 0
nb_pkts : 67108864
nb_timers : 100000000
available lcores : {0 1 2}
nb_flows : 1024
worker deq depth : 16
fwd_latency : false
nb_prod_lcores : 1
producer lcores : {2}
nb_worker_lcores : 1
worker lcores : {1}
nb_stages : 1
nb_evdev_ports : 2
nb_evdev_queues : 1
queue_priority : false
sched_type_list : {A}
crypto adapter mode : OP_FORWARD
nb_cryptodev : 1
prod_type : Event crypto adapter producers
prod_enq_burst_sz : 1
CRYPTODEV: elt_size 0 is expanded to 288
error: perf_event_crypto_adapter_setup() crypto adapter OP_FORWARD mode unsupported
error: main() perf_queue: eventdev setup failed
CRYPTODEV: rte_cryptodev_stop() line 1116: Device with dev_id=0 already stopped
With --crypto_adptr_mode 0
error: perf_event_crypto_adapter_setup() crypto adapter OP_NEW mode unsupported
Could you please provide the right commands to get this running?
Meantime, I will go through the code. Thanks!
>
>
> >
> > v2:
> > * Fix RHEL compilation warning.
> >
> > app/test-eventdev/evt_common.h | 3 +
> > app/test-eventdev/evt_main.c | 13 +-
> > app/test-eventdev/evt_options.c | 27 ++
> > app/test-eventdev/evt_options.h | 12 +
> > app/test-eventdev/evt_test.h | 6 +
> > app/test-eventdev/test_perf_atq.c | 51 ++++
> > app/test-eventdev/test_perf_common.c | 410
> > ++++++++++++++++++++++++++- app/test-
> eventdev/test_perf_common.h |
> > 16 ++ app/test-eventdev/test_perf_queue.c | 52 ++++
> > doc/guides/tools/testeventdev.rst | 13 +
> > 10 files changed, 596 insertions(+), 7 deletions(-)
> >
> > diff --git a/app/test-eventdev/evt_common.h
> > b/app/test-eventdev/evt_common.h index f466434459..2f301a7e79
> 100644
> > --- a/app/test-eventdev/evt_common.h
> > +++ b/app/test-eventdev/evt_common.h
> > @@ -7,6 +7,7 @@
> >
> > #include <rte_common.h>
> > #include <rte_debug.h>
> > +#include <rte_event_crypto_adapter.h>
> > #include <rte_eventdev.h>
> > #include <rte_service.h>
> >
> > @@ -39,6 +40,7 @@ enum evt_prod_type {
> > EVT_PROD_TYPE_SYNT, /* Producer type Synthetic i.e. CPU. */
> > EVT_PROD_TYPE_ETH_RX_ADPTR, /* Producer type Eth Rx Adapter.
> */
> > EVT_PROD_TYPE_EVENT_TIMER_ADPTR, /* Producer type Timer
> > Adapter. */
> > + EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR, /* Producer type Crypto
> > + Adapter. */
> > EVT_PROD_TYPE_MAX,
> > };
> >
> > @@ -77,6 +79,7 @@ struct evt_options {
> > uint64_t timer_tick_nsec;
> > uint64_t optm_timer_tick_nsec;
> > enum evt_prod_type prod_type;
> > + enum rte_event_crypto_adapter_mode crypto_adptr_mode;
> > };
> >
> > static inline bool
> > diff --git a/app/test-eventdev/evt_main.c
> > b/app/test-eventdev/evt_main.c index 194c980c7a..cef0fb1382 100644
> > --- a/app/test-eventdev/evt_main.c
> > +++ b/app/test-eventdev/evt_main.c
> > @@ -161,12 +161,19 @@ main(int argc, char **argv)
> > goto mempool_destroy;
> > }
> > }
> > + /* Test specific cryptodev setup */
> > + if (test->ops.cryptodev_setup) {
> > + if (test->ops.cryptodev_setup(test, &opt)) {
> > + evt_err("%s: cryptodev setup failed", opt.test_name);
> > + goto ethdev_destroy;
> > + }
> > + }
> >
> > /* Test specific eventdev setup */
> > if (test->ops.eventdev_setup) {
> > if (test->ops.eventdev_setup(test, &opt)) {
> > evt_err("%s: eventdev setup failed", opt.test_name);
> > - goto ethdev_destroy;
> > + goto cryptodev_destroy;
> > }
> > }
> >
> > @@ -197,6 +204,10 @@ main(int argc, char **argv)
> > if (test->ops.eventdev_destroy)
> > test->ops.eventdev_destroy(test, &opt);
> >
> > +cryptodev_destroy:
> > + if (test->ops.cryptodev_destroy)
> > + test->ops.cryptodev_destroy(test, &opt);
> > +
> > ethdev_destroy:
> > if (test->ops.ethdev_destroy)
> > test->ops.ethdev_destroy(test, &opt); diff --git
> > a/app/test-eventdev/evt_options.c b/app/test-eventdev/evt_options.c
> > index 753a7dbd7d..5ad1491020 100644
> > --- a/app/test-eventdev/evt_options.c
> > +++ b/app/test-eventdev/evt_options.c
> > @@ -122,6 +122,26 @@ evt_parse_timer_prod_type_burst(struct
> evt_options *opt,
> > return 0;
> > }
> >
> > +static int
> > +evt_parse_crypto_prod_type(struct evt_options *opt,
> > + const char *arg __rte_unused) {
> > + opt->prod_type = EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR;
> > + return 0;
> > +}
> > +
> > +static int
> > +evt_parse_crypto_adptr_mode(struct evt_options *opt, const char *arg)
> > +{
> > + uint8_t mode;
> > + int ret;
> > +
> > + ret = parser_read_uint8(&mode, arg);
> > + opt->crypto_adptr_mode = mode ?
> RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD :
> > + RTE_EVENT_CRYPTO_ADAPTER_OP_NEW;
> > + return ret;
> > +}
> > +
> > static int
> > evt_parse_test_name(struct evt_options *opt, const char *arg) { @@
> > -335,6 +355,7 @@ usage(char *program)
> > "\t--queue_priority : enable queue priority\n"
> > "\t--deq_tmo_nsec : global dequeue timeout\n"
> > "\t--prod_type_ethdev : use ethernet device as producer.\n"
> > + "\t--prod_type_cryptodev : use crypto device as producer.\n"
> > "\t--prod_type_timerdev : use event timer device as producer.\n"
> > "\t expity_nsec would be the timeout\n"
> > "\t in ns.\n"
> > @@ -345,6 +366,8 @@ usage(char *program)
> > "\t--timer_tick_nsec : timer tick interval in ns.\n"
> > "\t--max_tmo_nsec : max timeout interval in ns.\n"
> > "\t--expiry_nsec : event timer expiry ns.\n"
> > + "\t--crypto_adptr_mode : 0 for OP_NEW mode (default) and\n"
> > + "\t 1 for OP_FORWARD mode.\n"
> > "\t--mbuf_sz : packet mbuf size.\n"
> > "\t--max_pkt_sz : max packet size.\n"
> > "\t--prod_enq_burst_sz : producer enqueue burst size.\n"
> > @@ -415,8 +438,10 @@ static struct option lgopts[] = {
> > { EVT_QUEUE_PRIORITY, 0, 0, 0 },
> > { EVT_DEQ_TMO_NSEC, 1, 0, 0 },
> > { EVT_PROD_ETHDEV, 0, 0, 0 },
> > + { EVT_PROD_CRYPTODEV, 0, 0, 0 },
> > { EVT_PROD_TIMERDEV, 0, 0, 0 },
> > { EVT_PROD_TIMERDEV_BURST, 0, 0, 0 },
> > + { EVT_CRYPTO_ADPTR_MODE, 1, 0, 0 },
> > { EVT_NB_TIMERS, 1, 0, 0 },
> > { EVT_NB_TIMER_ADPTRS, 1, 0, 0 },
> > { EVT_TIMER_TICK_NSEC, 1, 0, 0 },
> > @@ -455,8 +480,10 @@ evt_opts_parse_long(int opt_idx, struct
> evt_options *opt)
> > { EVT_QUEUE_PRIORITY, evt_parse_queue_priority},
> > { EVT_DEQ_TMO_NSEC, evt_parse_deq_tmo_nsec},
> > { EVT_PROD_ETHDEV, evt_parse_eth_prod_type},
> > + { EVT_PROD_CRYPTODEV, evt_parse_crypto_prod_type},
> > { EVT_PROD_TIMERDEV, evt_parse_timer_prod_type},
> > { EVT_PROD_TIMERDEV_BURST,
> > evt_parse_timer_prod_type_burst},
> > + { EVT_CRYPTO_ADPTR_MODE, evt_parse_crypto_adptr_mode},
> > { EVT_NB_TIMERS, evt_parse_nb_timers},
> > { EVT_NB_TIMER_ADPTRS, evt_parse_nb_timer_adptrs},
> > { EVT_TIMER_TICK_NSEC, evt_parse_timer_tick_nsec},
> > diff --git a/app/test-eventdev/evt_options.h
> > b/app/test-eventdev/evt_options.h index 413d7092f0..2231c58801 100644
> > --- a/app/test-eventdev/evt_options.h
> > +++ b/app/test-eventdev/evt_options.h
> > @@ -9,6 +9,7 @@
> > #include <stdbool.h>
> >
> > #include <rte_common.h>
> > +#include <rte_cryptodev.h>
> > #include <rte_ethdev.h>
> > #include <rte_eventdev.h>
> > #include <rte_lcore.h>
> > @@ -33,8 +34,10 @@
> > #define EVT_QUEUE_PRIORITY ("queue_priority")
> > #define EVT_DEQ_TMO_NSEC ("deq_tmo_nsec")
> > #define EVT_PROD_ETHDEV ("prod_type_ethdev")
> > +#define EVT_PROD_CRYPTODEV ("prod_type_cryptodev")
> > #define EVT_PROD_TIMERDEV ("prod_type_timerdev")
> > #define EVT_PROD_TIMERDEV_BURST ("prod_type_timerdev_burst")
> > +#define EVT_CRYPTO_ADPTR_MODE ("crypto_adptr_mode")
> > #define EVT_NB_TIMERS ("nb_timers")
> > #define EVT_NB_TIMER_ADPTRS ("nb_timer_adptrs")
> > #define EVT_TIMER_TICK_NSEC ("timer_tick_nsec")
> > @@ -249,6 +252,8 @@ evt_prod_id_to_name(enum evt_prod_type
> prod_type)
> > return "Ethdev Rx Adapter";
> > case EVT_PROD_TYPE_EVENT_TIMER_ADPTR:
> > return "Event timer adapter";
> > + case EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR:
> > + return "Event crypto adapter";
> > }
> >
> > return "";
> > @@ -288,6 +293,13 @@ evt_dump_producer_type(struct evt_options
> *opt)
> > evt_dump("timer_tick_nsec", "%"PRIu64"",
> > opt->timer_tick_nsec);
> > break;
> > + case EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR:
> > + snprintf(name, EVT_PROD_MAX_NAME_LEN,
> > + "Event crypto adapter producers");
> > + evt_dump("crypto adapter mode", "%s",
> > + opt->crypto_adptr_mode ? "OP_FORWARD" : "OP_NEW");
> > + evt_dump("nb_cryptodev", "%u", rte_cryptodev_count());
> > + break;
> > }
> > evt_dump("prod_type", "%s", name); } diff --git
> > a/app/test-eventdev/evt_test.h b/app/test-eventdev/evt_test.h index
> > f07d2c3336..50fa474ec2 100644
> > --- a/app/test-eventdev/evt_test.h
> > +++ b/app/test-eventdev/evt_test.h
> > @@ -29,6 +29,8 @@ typedef int (*evt_test_mempool_setup_t)
> > (struct evt_test *test, struct evt_options *opt);
> > typedef int (*evt_test_ethdev_setup_t)
> > (struct evt_test *test, struct evt_options *opt);
> > +typedef int (*evt_test_cryptodev_setup_t)
> > + (struct evt_test *test, struct evt_options *opt);
> > typedef int (*evt_test_eventdev_setup_t)
> > (struct evt_test *test, struct evt_options *opt);
> > typedef int (*evt_test_launch_lcores_t) @@ -39,6 +41,8 @@ typedef void
> > (*evt_test_eventdev_destroy_t)
> > (struct evt_test *test, struct evt_options *opt);
> > typedef void (*evt_test_ethdev_destroy_t)
> > (struct evt_test *test, struct evt_options *opt);
> > +typedef void (*evt_test_cryptodev_destroy_t)
> > + (struct evt_test *test, struct evt_options *opt);
> > typedef void (*evt_test_mempool_destroy_t)
> > (struct evt_test *test, struct evt_options *opt);
> > typedef void (*evt_test_destroy_t) @@ -52,10 +56,12 @@ struct
> > evt_test_ops {
> > evt_test_mempool_setup_t mempool_setup;
> > evt_test_ethdev_setup_t ethdev_setup;
> > evt_test_eventdev_setup_t eventdev_setup;
> > + evt_test_cryptodev_setup_t cryptodev_setup;
> > evt_test_launch_lcores_t launch_lcores;
> > evt_test_result_t test_result;
> > evt_test_eventdev_destroy_t eventdev_destroy;
> > evt_test_ethdev_destroy_t ethdev_destroy;
> > + evt_test_cryptodev_destroy_t cryptodev_destroy;
> > evt_test_mempool_destroy_t mempool_destroy;
> > evt_test_destroy_t test_destroy; }; diff --git
> > a/app/test-eventdev/test_perf_atq.c
> > b/app/test-eventdev/test_perf_atq.c
> > index 8fd51004ee..dbb1dc8c0c 100644
> > --- a/app/test-eventdev/test_perf_atq.c
> > +++ b/app/test-eventdev/test_perf_atq.c
> > @@ -48,6 +48,22 @@ perf_atq_worker(void *arg, const int
> enable_fwd_latency)
> > continue;
> > }
> >
> > + if (prod_crypto_type &&
> > + (ev.event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
> > + struct rte_crypto_op *op = ev.event_ptr;
> > +
> > + if (op->status == RTE_CRYPTO_OP_STATUS_SUCCESS) {
> > + if (op->sym->m_dst == NULL)
> > + ev.event_ptr = op->sym->m_src;
> > + else
> > + ev.event_ptr = op->sym->m_dst;
> > + rte_crypto_op_free(op);
> > + } else {
> > + rte_crypto_op_free(op);
> > + continue;
> > + }
> > + }
> > +
> > if (enable_fwd_latency && !prod_timer_type)
> > /* first stage in pipeline, mark ts to compute fwd latency */
> > atq_mark_fwd_latency(&ev); @@ -87,6 +103,25 @@
> > perf_atq_worker_burst(void *arg, const int enable_fwd_latency)
> > }
> >
> > for (i = 0; i < nb_rx; i++) {
> > + if (prod_crypto_type &&
> > + (ev[i].event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
> > + struct rte_crypto_op *op =
> > + ev[i].event_ptr;
> > +
> > + if (op->status ==
> > + RTE_CRYPTO_OP_STATUS_SUCCESS) {
> > + if (op->sym->m_dst == NULL)
> > + ev[i].event_ptr =
> > + op->sym->m_src;
> > + else
> > + ev[i].event_ptr =
> > + op->sym->m_dst;
> > + rte_crypto_op_free(op);
> > + } else {
> > + rte_crypto_op_free(op);
> > + continue;
> > + }
> > + }
> > +
> > if (enable_fwd_latency && !prod_timer_type) {
> > rte_prefetch0(ev[i+1].event_ptr);
> > /* first stage in pipeline.
> > @@ -254,6 +289,20 @@ perf_atq_eventdev_setup(struct evt_test *test,
> struct evt_options *opt)
> > return ret;
> > }
> > }
> > + } else if (opt->prod_type ==
> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> > + uint8_t cdev_id, cdev_count;
> > +
> > + cdev_count = rte_cryptodev_count();
> > + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> > + ret = rte_cryptodev_start(cdev_id);
> > + if (ret) {
> > + evt_err("Failed to start cryptodev %u",
> > + cdev_id);
> > + return ret;
> > + }
> > + }
> > +
> > + rte_event_crypto_adapter_start(t->crypto_adptr.id);
> > }
> >
> > return 0;
> > @@ -295,12 +344,14 @@ static const struct evt_test_ops perf_atq = {
> > .opt_dump = perf_atq_opt_dump,
> > .test_setup = perf_test_setup,
> > .ethdev_setup = perf_ethdev_setup,
> > + .cryptodev_setup = perf_cryptodev_setup,
> > .mempool_setup = perf_mempool_setup,
> > .eventdev_setup = perf_atq_eventdev_setup,
> > .launch_lcores = perf_atq_launch_lcores,
> > .eventdev_destroy = perf_eventdev_destroy,
> > .mempool_destroy = perf_mempool_destroy,
> > .ethdev_destroy = perf_ethdev_destroy,
> > + .cryptodev_destroy = perf_cryptodev_destroy,
> > .test_result = perf_test_result,
> > .test_destroy = perf_test_destroy,
> > };
> > diff --git a/app/test-eventdev/test_perf_common.c
> > b/app/test-eventdev/test_perf_common.c
> > index 9b73874151..91cb6748ee 100644
> > --- a/app/test-eventdev/test_perf_common.c
> > +++ b/app/test-eventdev/test_perf_common.c
> > @@ -6,6 +6,8 @@
> >
> > #include "test_perf_common.h"
> >
> > +#define NB_CRYPTODEV_DESCRIPTORS 128
> > +
> > int
> > perf_test_result(struct evt_test *test, struct evt_options *opt) {
> > @@ -272,6 +274,125 @@ perf_event_timer_producer_burst(void *arg)
> > return 0;
> > }
> >
> > +static inline void
> > +crypto_adapter_enq_op_new(struct prod_data *p) {
> > + struct rte_cryptodev_sym_session **crypto_sess = p->crypto_sess;
> > + struct test_perf *t = p->t;
> > + const uint32_t nb_flows = t->nb_flows;
> > + const uint64_t nb_pkts = t->nb_pkts;
> > + struct rte_mempool *pool = t->pool;
> > + struct rte_crypto_sym_op *sym_op;
> > + struct evt_options *opt = t->opt;
> > + uint16_t qp_id = p->cdev_qp_id;
> > + uint8_t cdev_id = p->cdev_id;
> > + uint32_t flow_counter = 0;
> > + struct rte_crypto_op *op;
> > + struct rte_mbuf *m;
> > + uint64_t count = 0;
> > + uint16_t len;
> > +
> > + if (opt->verbose_level > 1)
> > + printf("%s(): lcore %d queue %d cdev_id %u cdev_qp_id %u\n",
> > + __func__, rte_lcore_id(), p->queue_id, p->cdev_id,
> > + p->cdev_qp_id);
> > +
> > + len = opt->mbuf_sz ? opt->mbuf_sz : RTE_ETHER_MIN_LEN;
> > +
> > + while (count < nb_pkts && t->done == false) {
> > + m = rte_pktmbuf_alloc(pool);
> > + if (m == NULL)
> > + continue;
> > +
> > + rte_pktmbuf_append(m, len);
> > + op = rte_crypto_op_alloc(t->crypto_adptr.op_pool,
> > + RTE_CRYPTO_OP_TYPE_SYMMETRIC);
> > + sym_op = op->sym;
> > + sym_op->m_src = m;
> > + sym_op->cipher.data.offset = 0;
> > + sym_op->cipher.data.length = len;
> > + rte_crypto_op_attach_sym_session(
> > + op, crypto_sess[flow_counter++ % nb_flows]);
> > + while (rte_cryptodev_enqueue_burst(cdev_id, qp_id, &op, 1) !=
> > + 1) {
> > + if (t->done)
> > + break;
> > + rte_pause();
> > + }
> > + count++;
> > + }
> > +}
> > +
> > +static inline void
> > +crypto_adapter_enq_op_fwd(struct prod_data *p) {
> > + struct rte_cryptodev_sym_session **crypto_sess = p->crypto_sess;
> > + const uint8_t dev_id = p->dev_id;
> > + const uint8_t port = p->port_id;
> > + struct test_perf *t = p->t;
> > + const uint32_t nb_flows = t->nb_flows;
> > + const uint64_t nb_pkts = t->nb_pkts;
> > + struct rte_mempool *pool = t->pool;
> > + struct evt_options *opt = t->opt;
> > + struct rte_crypto_sym_op *sym_op;
> > + uint32_t flow_counter = 0;
> > + struct rte_crypto_op *op;
> > + struct rte_event ev;
> > + struct rte_mbuf *m;
> > + uint64_t count = 0;
> > + uint16_t len;
> > +
> > + if (opt->verbose_level > 1)
> > + printf("%s(): lcore %d port %d queue %d cdev_id %u cdev_qp_id
> %u\n",
> > + __func__, rte_lcore_id(), port, p->queue_id, p->cdev_id,
> > + p->cdev_qp_id);
> > +
> > + ev.event = 0;
> > + ev.op = RTE_EVENT_OP_NEW;
> > + ev.queue_id = p->queue_id;
> > + ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> > + ev.event_type = RTE_EVENT_TYPE_CPU;
> > + len = opt->mbuf_sz ? opt->mbuf_sz : RTE_ETHER_MIN_LEN;
> > +
> > + while (count < nb_pkts && t->done == false) {
> > + m = rte_pktmbuf_alloc(pool);
> > + if (m == NULL)
> > + continue;
> > +
> > + rte_pktmbuf_append(m, len);
> > + op = rte_crypto_op_alloc(t->crypto_adptr.op_pool,
> > + RTE_CRYPTO_OP_TYPE_SYMMETRIC);
> > + sym_op = op->sym;
> > + sym_op->m_src = m;
> > + sym_op->cipher.data.offset = 0;
> > + sym_op->cipher.data.length = len;
> > + rte_crypto_op_attach_sym_session(
> > + op, crypto_sess[flow_counter++ % nb_flows]);
> > + ev.event_ptr = op;
> > + while (rte_event_crypto_adapter_enqueue(dev_id, port, &ev, 1)
> !=
> > + 1) {
> > + if (t->done)
> > + break;
> > + rte_pause();
> > + }
> > + count++;
> > + }
> > +}
> > +
> > +static inline int
> > +perf_event_crypto_producer(void *arg) {
> > + struct prod_data *p = arg;
> > + struct evt_options *opt = p->t->opt;
> > +
> > + if (opt->crypto_adptr_mode ==
> RTE_EVENT_CRYPTO_ADAPTER_OP_NEW)
> > + crypto_adapter_enq_op_new(p);
> > + else
> > + crypto_adapter_enq_op_fwd(p);
> > +
> > + return 0;
> > +}
> > +
> > static int
> > perf_producer_wrapper(void *arg)
> > {
> > @@ -298,6 +419,8 @@ perf_producer_wrapper(void *arg)
> > else if (t->opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR
> &&
> > t->opt->timdev_use_burst)
> > return perf_event_timer_producer_burst(arg);
> > + else if (t->opt->prod_type ==
> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
> > + return perf_event_crypto_producer(arg);
> > return 0;
> > }
> >
> > @@ -405,8 +528,10 @@ perf_launch_lcores(struct evt_test *test, struct
> evt_options *opt,
> > if (remaining <= 0) {
> > t->result = EVT_TEST_SUCCESS;
> > if (opt->prod_type == EVT_PROD_TYPE_SYNT ||
> > - opt->prod_type ==
> > - EVT_PROD_TYPE_EVENT_TIMER_ADPTR) {
> > + opt->prod_type ==
> > + EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
> > + opt->prod_type ==
> > +
> > + EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> > t->done = true;
> > break;
> > }
> > @@ -415,7 +540,8 @@ perf_launch_lcores(struct evt_test *test, struct
> > evt_options *opt,
> >
> > if (new_cycles - dead_lock_cycles > dead_lock_sample &&
> > (opt->prod_type == EVT_PROD_TYPE_SYNT ||
> > - opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR)) {
> > + opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
> > + opt->prod_type ==
> > + EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)) {
> > remaining = t->outstand_pkts - processed_pkts(t);
> > if (dead_lock_remaining == remaining) {
> > rte_event_dev_dump(opt->dev_id,
> > stdout); @@ -537,6 +663,96 @@ perf_event_timer_adapter_setup(struct
> test_perf *t)
> > return 0;
> > }
> >
> > +static int
> > +perf_event_crypto_adapter_setup(struct test_perf *t,
> > + struct rte_event_port_conf port_conf)
> > +{
> > + struct evt_options *opt = t->opt;
> > + uint8_t cdev_id, cdev_count;
> > + int ret;
> > +
> > + t->crypto_adptr.id = 0;
> > + ret = rte_event_crypto_adapter_create(t->crypto_adptr.id, opt-
> >dev_id,
> > + &port_conf, 0);
> > + if (ret)
> > + return ret;
> > +
> > + cdev_count = rte_cryptodev_count();
> > + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> > + uint32_t cap;
> > +
> > + ret = rte_event_crypto_adapter_caps_get(opt->dev_id, cdev_id,
> > + &cap);
> > + if (ret) {
> > + evt_err("Failed to get crypto adapter capabilities");
> > + return ret;
> > + }
> > +
> > + if (((opt->crypto_adptr_mode ==
> > + RTE_EVENT_CRYPTO_ADAPTER_OP_NEW) &&
> > + !(cap &
> > +
> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW)) ||
> > + ((opt->crypto_adptr_mode ==
> > + RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD) &&
> > + !(cap &
> > +
> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD))) {
> > + evt_err("crypto adapter %s mode unsupported\n",
> > + opt->crypto_adptr_mode ? "OP_FORWARD" :
> > + "OP_NEW");
> > + return -EINVAL;
> > + }
> > +
> > + if (!(cap &
> > +
> RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA)) {
> > + evt_err("Storing crypto session not supported");
> > + return -EINVAL;
> > + }
> > +
> > + if (cap &
> > +
> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) {
> > + struct rte_event response_info;
> > +
> > + response_info.event = 0;
> > + ret = rte_event_crypto_adapter_queue_pair_add(
> > + t->crypto_adptr.id, cdev_id, -1,
> > + &response_info);
> > + } else {
> > + ret = rte_event_crypto_adapter_queue_pair_add(
> > + t->crypto_adptr.id, cdev_id, -1, NULL);
> > + }
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static struct rte_cryptodev_sym_session *
> > +cryptodev_sym_sess_create(struct prod_data *p, struct test_perf *t) {
> > + struct rte_crypto_sym_xform cipher_xform;
> > + struct rte_cryptodev_sym_session *sess;
> > +
> > + cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> > + cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
> > + cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
> > + cipher_xform.next = NULL;
> > +
> > + sess = rte_cryptodev_sym_session_create(t-
> >crypto_adptr.sess_pool);
> > + if (sess == NULL) {
> > + evt_err("Failed to create sym session");
> > + return NULL;
> > + }
> > +
> > + if (rte_cryptodev_sym_session_init(p->cdev_id, sess, &cipher_xform,
> > + t->crypto_adptr.sess_priv_pool)) {
> > + evt_err("Failed to init session");
> > + return NULL;
> > + }
> > +
> > + return sess;
> > +}
> > +
> > int
> > perf_event_dev_port_setup(struct evt_test *test, struct evt_options
> *opt,
> > uint8_t stride, uint8_t nb_queues, @@
> > -598,6 +814,55 @@ perf_event_dev_port_setup(struct evt_test *test,
> struct evt_options *opt,
> > ret = perf_event_timer_adapter_setup(t);
> > if (ret)
> > return ret;
> > + } else if (opt->prod_type ==
> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> > + uint8_t cdev_id = 0;
> > + uint16_t qp_id = 0;
> > +
> > + prod = 0;
> > + for (; port < perf_nb_event_ports(opt); port++) {
> > + struct rte_cryptodev_sym_session *crypto_sess;
> > + union rte_event_crypto_metadata m_data;
> > + struct prod_data *p = &t->prod[port];
> > + uint32_t flow_id;
> > +
> > + if (qp_id == rte_cryptodev_queue_pair_count(cdev_id)) {
> > + cdev_id++;
> > + qp_id = 0;
> > + }
> > +
> > + p->dev_id = opt->dev_id;
> > + p->port_id = port;
> > + p->queue_id = prod * stride;
> > + p->cdev_id = cdev_id;
> > + p->cdev_qp_id = qp_id;
> > + p->crypto_sess = rte_zmalloc_socket(
> > + NULL, sizeof(crypto_sess) * t->nb_flows,
> > + RTE_CACHE_LINE_SIZE, opt->socket_id);
> > +
> > + m_data.request_info.cdev_id = p->cdev_id;
> > + m_data.request_info.queue_pair_id = p->cdev_qp_id;
> > + m_data.response_info.op = RTE_EVENT_OP_NEW;
> > + m_data.response_info.sched_type =
> RTE_SCHED_TYPE_ATOMIC;
> > + m_data.response_info.event_type = RTE_EVENT_TYPE_CPU;
> > + m_data.response_info.queue_id = p->queue_id;
> > + for (flow_id = 0; flow_id < t->nb_flows; flow_id++) {
> > + crypto_sess = cryptodev_sym_sess_create(p, t);
> > + if (crypto_sess == NULL)
> > + return -ENOMEM;
> > +
> > + m_data.response_info.flow_id = flow_id;
> > + rte_cryptodev_sym_session_set_user_data(
> > + crypto_sess, &m_data, sizeof(m_data));
> > + p->crypto_sess[flow_id] = crypto_sess;
> > + }
> > + p->t = t;
> > + qp_id++;
> > + prod++;
> > + }
> > +
> > + ret = perf_event_crypto_adapter_setup(t, *port_conf);
> > + if (ret)
> > + return ret;
> > } else {
> > prod = 0;
> > for ( ; port < perf_nb_event_ports(opt); port++) { @@
> > -659,7 +924,8 @@ perf_opt_check(struct evt_options *opt, uint64_t
> nb_queues)
> > }
> >
> > if (opt->prod_type == EVT_PROD_TYPE_SYNT ||
> > - opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR) {
> > + opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
> > + opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> > /* Validate producer lcores */
> > if (evt_lcores_has_overlap(opt->plcores,
> > rte_get_main_lcore())) { @@
> > -767,8 +1033,7 @@ perf_ethdev_setup(struct evt_test *test, struct
> evt_options *opt)
> > },
> > };
> >
> > - if (opt->prod_type == EVT_PROD_TYPE_SYNT ||
> > - opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR)
> > + if (opt->prod_type != EVT_PROD_TYPE_ETH_RX_ADPTR)
> > return 0;
> >
> > if (!rte_eth_dev_count_avail()) { @@ -841,6 +1106,139 @@ void
> > perf_ethdev_destroy(struct evt_test *test, struct evt_options *opt)
> > }
> > }
> >
> > +int
> > +perf_cryptodev_setup(struct evt_test *test, struct evt_options *opt)
> > +{
> > + uint8_t cdev_count, cdev_id, nb_plcores, nb_qps;
> > + struct test_perf *t = evt_test_priv(test);
> > + unsigned int max_session_size;
> > + uint32_t nb_sessions;
> > + int ret;
> > +
> > + if (opt->prod_type != EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
> > + return 0;
> > +
> > + cdev_count = rte_cryptodev_count();
> > + if (cdev_count == 0) {
> > + evt_err("No crypto devices available\n");
> > + return -ENODEV;
> > + }
> > +
> > + t->crypto_adptr.op_pool = rte_crypto_op_pool_create(
> > + "crypto_op_pool", RTE_CRYPTO_OP_TYPE_SYMMETRIC, opt-
> >pool_sz,
> > + 128, 0, rte_socket_id());
> > + if (t->crypto_adptr.op_pool == NULL) {
> > + evt_err("Failed to create crypto op pool");
> > + return -ENOMEM;
> > + }
> > +
> > + nb_sessions = evt_nr_active_lcores(opt->plcores) * t->nb_flows;
> > + t->crypto_adptr.sess_pool =
> rte_cryptodev_sym_session_pool_create(
> > + "ca_sess_pool", nb_sessions, 0, 0,
> > + sizeof(union rte_event_crypto_metadata), SOCKET_ID_ANY);
> > + if (t->crypto_adptr.sess_pool == NULL) {
> > + evt_err("Failed to create sym session pool");
> > + ret = -ENOMEM;
> > + goto err;
> > + }
> > +
> > + max_session_size = 0;
> > + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> > + unsigned int session_size;
> > +
> > + session_size =
> > + rte_cryptodev_sym_get_private_session_size(cdev_id);
> > + if (session_size > max_session_size)
> > + max_session_size = session_size;
> > + }
> > + max_session_size += sizeof(union rte_event_crypto_metadata);
> > + t->crypto_adptr.sess_priv_pool = rte_mempool_create(
> > + "ca_sess_priv_pool", nb_sessions, max_session_size, 0, 0, NULL,
> > + NULL, NULL, NULL, SOCKET_ID_ANY, 0);
> > + if (t->crypto_adptr.sess_priv_pool == NULL) {
> > + evt_err("failed to create sym session private pool");
> > + ret = -ENOMEM;
> > + goto err;
> > + }
> > +
> > + nb_plcores = evt_nr_active_lcores(opt->plcores);
> > + nb_qps = (nb_plcores % cdev_count) ? (nb_plcores / cdev_count) + 1 :
> > + nb_plcores / cdev_count;
> > + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> > + struct rte_cryptodev_qp_conf qp_conf;
> > + struct rte_cryptodev_config conf;
> > + struct rte_cryptodev_info info;
> > + int qp_id;
> > +
> > + rte_cryptodev_info_get(cdev_id, &info);
> > + if (nb_qps > info.max_nb_queue_pairs) {
> > + evt_err("Not enough queue pairs per cryptodev (%u)",
> > + nb_qps);
> > + ret = -EINVAL;
> > + goto err;
> > + }
> > +
> > + conf.nb_queue_pairs = nb_qps;
> > + conf.socket_id = SOCKET_ID_ANY;
> > + conf.ff_disable = RTE_CRYPTODEV_FF_SECURITY;
> > +
> > + ret = rte_cryptodev_configure(cdev_id, &conf);
> > + if (ret) {
> > + evt_err("Failed to configure cryptodev (%u)", cdev_id);
> > + goto err;
> > + }
> > +
> > + qp_conf.nb_descriptors = NB_CRYPTODEV_DESCRIPTORS;
> > + qp_conf.mp_session = t->crypto_adptr.sess_pool;
> > + qp_conf.mp_session_private =
> > + t->crypto_adptr.sess_priv_pool;
> > +
> > + for (qp_id = 0; qp_id < conf.nb_queue_pairs; qp_id++) {
> > + ret = rte_cryptodev_queue_pair_setup(
> > + cdev_id, qp_id, &qp_conf,
> > + rte_cryptodev_socket_id(cdev_id));
> > + if (ret) {
> > + evt_err("Failed to setup queue pairs on cryptodev %u\n",
> > + cdev_id);
> > + goto err;
> > + }
> > + }
> > + }
> > +
> > + return 0;
> > +err:
> > + rte_mempool_free(t->crypto_adptr.op_pool);
> > + rte_mempool_free(t->crypto_adptr.sess_pool);
> > + rte_mempool_free(t->crypto_adptr.sess_priv_pool);
> > +
> > + return ret;
> > +}
> > +
> > +void
> > +perf_cryptodev_destroy(struct evt_test *test, struct evt_options
> > +*opt) {
> > + uint8_t cdev_id, cdev_count = rte_cryptodev_count();
> > + struct test_perf *t = evt_test_priv(test);
> > +
> > + RTE_SET_USED(opt);
> > +
> > + if (opt->prod_type != EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
> > + return;
> > +
> > + rte_event_crypto_adapter_stop(t->crypto_adptr.id);
> > +
> > + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> > + rte_cryptodev_stop(cdev_id);
> > + rte_event_crypto_adapter_queue_pair_del(t->crypto_adptr.id,
> > + cdev_id, -1);
> > + }
> > +
> > + rte_event_crypto_adapter_free(t->crypto_adptr.id);
> > +
> > + rte_mempool_free(t->crypto_adptr.op_pool);
> > + rte_mempool_free(t->crypto_adptr.sess_pool);
> > + rte_mempool_free(t->crypto_adptr.sess_priv_pool);
> > +}
> > +
> > int
> > perf_mempool_setup(struct evt_test *test, struct evt_options *opt) {
> > diff --git a/app/test-eventdev/test_perf_common.h
> > b/app/test-eventdev/test_perf_common.h
> > index 14dcf80429..d9ad3a0b0d 100644
> > --- a/app/test-eventdev/test_perf_common.h
> > +++ b/app/test-eventdev/test_perf_common.h
> > @@ -9,9 +9,11 @@
> > #include <stdbool.h>
> > #include <unistd.h>
> >
> > +#include <rte_cryptodev.h>
> > #include <rte_cycles.h>
> > #include <rte_ethdev.h>
> > #include <rte_eventdev.h>
> > +#include <rte_event_crypto_adapter.h>
> > #include <rte_event_eth_rx_adapter.h> #include
> > <rte_event_timer_adapter.h> #include <rte_lcore.h> @@ -37,9 +39,18
> @@
> > struct prod_data {
> > uint8_t dev_id;
> > uint8_t port_id;
> > uint8_t queue_id;
> > + uint8_t cdev_id;
> > + uint16_t cdev_qp_id;
> > + struct rte_cryptodev_sym_session **crypto_sess;
> > struct test_perf *t;
> > } __rte_cache_aligned;
> >
> > +struct crypto_adptr_data {
> > + uint8_t id;
> > + struct rte_mempool *op_pool;
> > + struct rte_mempool *sess_pool;
> > + struct rte_mempool *sess_priv_pool; };
> >
> > struct test_perf {
> > /* Don't change the offset of "done". Signal handler use this
> > memory @@ -58,6 +69,7 @@ struct test_perf {
> > uint8_t sched_type_list[EVT_MAX_STAGES] __rte_cache_aligned;
> > struct rte_event_timer_adapter *timer_adptr[
> > RTE_EVENT_TIMER_ADAPTER_NUM_MAX] __rte_cache_aligned;
> > + struct crypto_adptr_data crypto_adptr;
> > } __rte_cache_aligned;
> >
> > struct perf_elt {
> > @@ -81,6 +93,8 @@ struct perf_elt {
> > const uint8_t port = w->port_id;\
> > const uint8_t prod_timer_type = \
> > opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR;\
> > + const uint8_t prod_crypto_type = \
> > + opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR;\
> > uint8_t *const sched_type_list = &t->sched_type_list[0];\
> > struct rte_mempool *const pool = t->pool;\
> > const uint8_t nb_stages = t->opt->nb_stages;\ @@ -154,6 +168,7
> > @@ int perf_test_result(struct evt_test *test, struct evt_options
> > *opt); int perf_opt_check(struct evt_options *opt, uint64_t
> > nb_queues); int perf_test_setup(struct evt_test *test, struct
> > evt_options *opt); int perf_ethdev_setup(struct evt_test *test,
> > struct evt_options *opt);
> > +int perf_cryptodev_setup(struct evt_test *test, struct evt_options
> > +*opt);
> > int perf_mempool_setup(struct evt_test *test, struct evt_options
> > *opt); int perf_event_dev_port_setup(struct evt_test *test, struct
> evt_options *opt,
> > uint8_t stride, uint8_t nb_queues, @@
> > -164,6 +179,7 @@ int perf_launch_lcores(struct evt_test *test, struct
> > evt_options *opt, void perf_opt_dump(struct evt_options *opt, uint8_t
> > nb_queues); void perf_test_destroy(struct evt_test *test, struct
> > evt_options *opt); void perf_eventdev_destroy(struct evt_test *test,
> > struct evt_options *opt);
> > +void perf_cryptodev_destroy(struct evt_test *test, struct evt_options
> > +*opt);
> > void perf_ethdev_destroy(struct evt_test *test, struct evt_options
> > *opt); void perf_mempool_destroy(struct evt_test *test, struct
> > evt_options *opt);
> >
> > diff --git a/app/test-eventdev/test_perf_queue.c
> > b/app/test-eventdev/test_perf_queue.c
> > index f4ea3a795f..5657c8b3cd 100644
> > --- a/app/test-eventdev/test_perf_queue.c
> > +++ b/app/test-eventdev/test_perf_queue.c
> > @@ -49,6 +49,23 @@ perf_queue_worker(void *arg, const int
> enable_fwd_latency)
> > rte_pause();
> > continue;
> > }
> > +
> > + if (prod_crypto_type &&
> > + (ev.event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
> > + struct rte_crypto_op *op = ev.event_ptr;
> > +
> > + if (op->status == RTE_CRYPTO_OP_STATUS_SUCCESS) {
> > + if (op->sym->m_dst == NULL)
> > + ev.event_ptr = op->sym->m_src;
> > + else
> > + ev.event_ptr = op->sym->m_dst;
> > + rte_crypto_op_free(op);
> > + } else {
> > + rte_crypto_op_free(op);
> > + continue;
> > + }
> > + }
> > +
> > if (enable_fwd_latency && !prod_timer_type)
> > /* first q in pipeline, mark timestamp to compute fwd latency */
> > mark_fwd_latency(&ev, nb_stages); @@ -88,6
> > +105,25 @@ perf_queue_worker_burst(void *arg, const int
> enable_fwd_latency)
> > }
> >
> > for (i = 0; i < nb_rx; i++) {
> > + if (prod_crypto_type &&
> > + (ev[i].event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
> > + struct rte_crypto_op *op =
> > + ev[i].event_ptr;
> > +
> > + if (op->status ==
> > + RTE_CRYPTO_OP_STATUS_SUCCESS) {
> > + if (op->sym->m_dst == NULL)
> > + ev[i].event_ptr =
> > + op->sym->m_src;
> > + else
> > + ev[i].event_ptr =
> > + op->sym->m_dst;
> > + rte_crypto_op_free(op);
> > + } else {
> > + rte_crypto_op_free(op);
> > + continue;
> > + }
> > + }
> > +
> > if (enable_fwd_latency && !prod_timer_type) {
> > rte_prefetch0(ev[i+1].event_ptr);
> > /* first queue in pipeline.
> > @@ -269,6 +305,20 @@ perf_queue_eventdev_setup(struct evt_test
> *test, struct evt_options *opt)
> > return ret;
> > }
> > }
> > + } else if (opt->prod_type ==
> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> > + uint8_t cdev_id, cdev_count;
> > +
> > + cdev_count = rte_cryptodev_count();
> > + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> > + ret = rte_cryptodev_start(cdev_id);
> > + if (ret) {
> > + evt_err("Failed to start cryptodev %u",
> > + cdev_id);
> > + return ret;
> > + }
> > + }
> > +
> > + rte_event_crypto_adapter_start(t->crypto_adptr.id);
> > }
> >
> > return 0;
> > @@ -311,11 +361,13 @@ static const struct evt_test_ops perf_queue = {
> > .test_setup = perf_test_setup,
> > .mempool_setup = perf_mempool_setup,
> > .ethdev_setup = perf_ethdev_setup,
> > + .cryptodev_setup = perf_cryptodev_setup,
> > .eventdev_setup = perf_queue_eventdev_setup,
> > .launch_lcores = perf_queue_launch_lcores,
> > .eventdev_destroy = perf_eventdev_destroy,
> > .mempool_destroy = perf_mempool_destroy,
> > .ethdev_destroy = perf_ethdev_destroy,
> > + .cryptodev_destroy = perf_cryptodev_destroy,
> > .test_result = perf_test_result,
> > .test_destroy = perf_test_destroy,
> > };
> > diff --git a/doc/guides/tools/testeventdev.rst
> > b/doc/guides/tools/testeventdev.rst
> > index 48efb9ea6e..f7d813226d 100644
> > --- a/doc/guides/tools/testeventdev.rst
> > +++ b/doc/guides/tools/testeventdev.rst
> > @@ -120,6 +120,10 @@ The following are the application command-line
> options:
> >
> > Use burst mode event timer adapter as producer.
> >
> > +* ``--prod_type_cryptodev``
> > +
> > + Use crypto device as producer.
> > +
> > * ``--timer_tick_nsec``
> >
> > Used to dictate number of nano seconds between bucket
> > traversal of the @@ -148,6 +152,11 @@ The following are the application
> command-line options:
> > timeout is out of the supported range of event device it will be
> > adjusted to the highest/lowest supported dequeue timeout
> supported.
> >
> > +* ``--crypto_adptr_mode``
> > +
> > + Set crypto adapter mode. Use 0 for OP_NEW (default) and 1 for
> > + OP_FORWARD mode.
> > +
> > * ``--mbuf_sz``
> >
> > Set packet mbuf size. Can be used to configure Jumbo Frames.
> > Only @@ -420,6 +429,7 @@ Supported application command line options
> are following::
> > --prod_type_ethdev
> > --prod_type_timerdev_burst
> > --prod_type_timerdev
> > + --prod_type_cryptodev
> > --prod_enq_burst_sz
> > --timer_tick_nsec
> > --max_tmo_nsec
> > @@ -427,6 +437,7 @@ Supported application command line options are
> following::
> > --nb_timers
> > --nb_timer_adptrs
> > --deq_tmo_nsec
> > + --crypto_adptr_mode
> >
> > Example
> > ^^^^^^^
> > @@ -529,12 +540,14 @@ Supported application command line options are
> following::
> > --prod_type_ethdev
> > --prod_type_timerdev_burst
> > --prod_type_timerdev
> > + --prod_type_cryptodev
> > --timer_tick_nsec
> > --max_tmo_nsec
> > --expiry_nsec
> > --nb_timers
> > --nb_timer_adptrs
> > --deq_tmo_nsec
> > + --crypto_adptr_mode
> >
> > Example
> > ^^^^^^^
> > --
> > 2.25.1
> >
next prev parent reply other threads:[~2022-01-23 16:56 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-20 19:53 [PATCH] " Shijith Thotton
2021-12-21 8:51 ` [PATCH v2] " Shijith Thotton
2021-12-30 11:56 ` Gujjar, Abhinandan S
2022-01-03 6:04 ` Shijith Thotton
2022-01-03 8:46 ` Gujjar, Abhinandan S
2022-01-03 9:14 ` Shijith Thotton
2022-01-04 15:28 ` Aaron Conole
2022-01-04 15:49 ` [EXT] " Shijith Thotton
2022-01-04 10:30 ` [PATCH v3] " Shijith Thotton
2022-01-21 12:25 ` Jerin Jacob
2022-01-23 16:56 ` Gujjar, Abhinandan S [this message]
2022-01-23 18:44 ` Gujjar, Abhinandan S
2022-01-24 6:09 ` Shijith Thotton
2022-01-24 6:59 ` Shijith Thotton
2022-01-25 14:15 ` Gujjar, Abhinandan S
2022-01-25 13:39 ` Gujjar, Abhinandan S
2022-02-08 17:00 ` Shijith Thotton
2022-02-14 15:26 ` Jerin Jacob
2022-02-14 15:31 ` Gujjar, Abhinandan S
2022-02-08 16:33 ` [PATCH v4] " Shijith Thotton
2022-02-15 6:03 ` Gujjar, Abhinandan S
2022-02-15 16:08 ` Shijith Thotton
2022-02-15 16:46 ` Gujjar, Abhinandan S
2022-02-15 16:56 ` [PATCH v5] " Shijith Thotton
2022-02-16 4:47 ` Gujjar, Abhinandan S
2022-02-16 7:08 ` Shijith Thotton
2022-02-16 7:49 ` Gujjar, Abhinandan S
2022-02-16 8:44 ` Jerin Jacob
2022-02-16 8:54 ` Jerin Jacob
2022-02-17 5:33 ` Gujjar, Abhinandan S
2022-02-21 13:10 ` Van Haaren, Harry
2022-02-22 7:03 ` Shijith Thotton
2022-02-23 9:02 ` Gujjar, Abhinandan S
2022-02-23 10:02 ` Shijith Thotton
2022-02-23 10:13 ` Van Haaren, Harry
2022-02-23 16:33 ` Gujjar, Abhinandan S
2022-02-23 17:02 ` Shijith Thotton
2022-02-17 6:56 ` [EXT] " Akhil Goyal
2022-02-18 12:00 ` Shijith Thotton
2022-02-18 12:11 ` [PATCH v6] " Shijith Thotton
2022-02-24 4:46 ` [PATCH v7] " Shijith Thotton
2022-02-24 6:18 ` Gujjar, Abhinandan S
2022-02-24 7:58 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH0PR11MB48248914B263D35CEE60671BE85D9@PH0PR11MB4824.namprd11.prod.outlook.com \
--to=abhinandan.gujjar@intel.com \
--cc=anoobj@marvell.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jerinj@marvell.com \
--cc=jerinjacobk@gmail.com \
--cc=pbhagavatula@marvell.com \
--cc=sthotton@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).