From: "Gujjar, Abhinandan S" <abhinandan.gujjar@intel.com>
To: Shijith Thotton <sthotton@marvell.com>,
"dev@dpdk.org" <dev@dpdk.org>,
Jerin Jacob Kollanukkaran <jerinj@marvell.com>,
"dpdklab@iol.unh.edu" <dpdklab@iol.unh.edu>,
"aconole@redhat.com" <aconole@redhat.com>
Cc: Anoob Joseph <anoobj@marvell.com>,
Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>,
Akhil Goyal <gakhil@marvell.com>
Subject: RE: [PATCH v2] app/eventdev: add crypto producer mode
Date: Mon, 3 Jan 2022 08:46:43 +0000 [thread overview]
Message-ID: <PH0PR11MB4824A15D330EF8903BE7CFD4E8499@PH0PR11MB4824.namprd11.prod.outlook.com> (raw)
In-Reply-To: <CO6PR18MB4418E1BDC472850B91154265D9499@CO6PR18MB4418.namprd18.prod.outlook.com>
Hi Shijith,
> -----Original Message-----
> From: Shijith Thotton <sthotton@marvell.com>
> Sent: Monday, January 3, 2022 11:34 AM
> To: Gujjar, Abhinandan S <abhinandan.gujjar@intel.com>; dev@dpdk.org; Jerin
> Jacob Kollanukkaran <jerinj@marvell.com>
> Cc: Anoob Joseph <anoobj@marvell.com>; Pavan Nikhilesh Bhagavatula
> <pbhagavatula@marvell.com>; Akhil Goyal <gakhil@marvell.com>
> Subject: RE: [PATCH v2] app/eventdev: add crypto producer mode
>
> Hi Abhinandan,
>
> >> Subject: [PATCH v2] app/eventdev: add crypto producer mode
> >>
> >> In crypto producer mode, producer core enqueues cryptodev with
> >> software generated crypto ops and worker core dequeues crypto
> >> completion events from the eventdev. Event crypto metadata used for
> >> above processing is pre- populated in each crypto session.
> >>
> >> Parameter --prod_type_cryptodev can be used to enable crypto producer
> >mode.
> >> Parameter --crypto_adptr_mode can be set to select the crypto adapter
> >> mode,
> >0
> >> for OP_NEW and 1 for OP_FORWARD.
> >>
> >> This mode can be used to measure the performance of crypto adapter.
> >>
> >> Example:
> >> ./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
> >> --prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
> >> --stlist=a --wlcores 1 --plcores 2
> >
> >This patch has some perf failure as shown below. Could you please look into
> this?
> >105300 --> performance testing fail
> >
> >Test environment and result as below:
> >
> >Ubuntu 20.04
> >Kernel: 4.15.0-generic
> >Compiler: gcc 7.4
> >NIC: Intel Corporation Ethernet Converged Network Adapter 82599ES 10000
> >Mbps
> >Target: x86_64-native-linuxapp-gcc
> >Fail/Total: 0/4
> >
> >Detail performance results:
> >+------------+---------+----------+-------------+------------------------------+
> >| frame_size | txd/rxd | num_cpus | num_threads | throughput
> >| difference from
> >|
> >| | | | | expected |
> >+============+=========+==========+=============+=============
> >=================+
> >| 64 | 512 | 1 | 1 | 0.3% |
> >+------------+---------+----------+-------------+------------------------------+
> >| 64 | 2048 | 1 | 1 | -0.2% |
> >+------------+---------+----------+-------------+------------------------------+
> >| 64 | 512 | 1 | 2 | 0.0% |
> >+------------+---------+----------+-------------+------------------------------+
> >| 64 | 2048 | 1 | 2 | 0.3% |
> >+------------+---------+----------+-------------+------------------------------+
> >
> >Ubuntu 20.04
> >Kernel: 4.15.0-generic
> >Compiler: gcc 7.4
> >NIC: Intel Corporation Ethernet Converged Network Adapter XL710-QDA2
> >40000 Mbps
> >Target: x86_64-native-linuxapp-gcc
> >Fail/Total: 1/4
> >
> >Detail performance results:
> >+------------+---------+----------+-------------+------------------------------+
> >| frame_size | txd/rxd | num_cpus | num_threads | throughput
> >| difference from
> >|
> >| | | | | expected |
> >+============+=========+==========+=============+=============
> >=================+
> >| 64 | 512 | 1 | 1 | 0.2% |
> >+------------+---------+----------+-------------+------------------------------+
> >| 64 | 2048 | 1 | 1 | -0.7% |
> >+------------+---------+----------+-------------+------------------------------+
> >| 64 | 512 | 1 | 2 | -1.5% |
> >+------------+---------+----------+-------------+------------------------------+
> >| 64 | 2048 | 1 | 2 | -5.3% |
> >+------------+---------+----------+-------------+------------------------------+
> >
> >Ubuntu 20.04 ARM
> >Kernel: 4.15.0-132-generic
> >Compiler: gcc 7.5
> >NIC: Arm Intel Corporation Ethernet Converged Network Adapter
> >XL710-QDA2
> >40000 Mbps
> >Target: x86_64-native-linuxapp-gcc
> >Fail/Total: 0/2
> >
> >Detail performance results:
> >+------------+---------+----------+-------------+------------------------------+
> >| frame_size | txd/rxd | num_cpus | num_threads | throughput
> >| difference from
> >|
> >| | | | | expected |
> >+============+=========+==========+=============+=============
> >=================+
> >| 64 | 512 | 1 | 1 | 0.1% |
> >+------------+---------+----------+-------------+------------------------------+
> >| 64 | 2048 | 1 | 1 | -0.5% |
> >+------------+---------+----------+-------------+------------------------------+
> >
> >To view detailed results, visit:
> >https://urldefense.proofpoint.com/v2/url?u=https-
> >3A__lab.dpdk.org_results_dashboard_patchsets_20534_&d=DwIFAg&c=nKjWe
> c2
> >b6R0mOyPaz7xtfQ&r=G9w4KsPaQLACBfGCL35PtiRH996yqJDxAZwrWegU2qQ&
> m=
> >dPDgmKiLC_KqhgjwZrodyFlBdlFPgckVr9IW0c7t2cIHpkw6u9pGqgElFqqwuU1v&s
> =E
> >ajYUFziZY27q6LB4p5sOGuFlty3VlOjbMsLXaQ5MeI&e=
> >
>
> Performance regression is reported by nic_single_core_perf, but is using
> testpmd to measure performance. As this patch does not touch testpmd, the
> issue could be with DPDK CI. Is it possible to re-trigger CI ?
I have don't have option to trigger CI from my side.
So, I have added dpdklab and Aaron to the loop.
Please check with them.
>
> >>
> >> Signed-off-by: Shijith Thotton <sthotton@marvell.com>
> >> ---
> >> v2:
> >> * Fix RHEL compilation warning.
> >>
> >> app/test-eventdev/evt_common.h | 3 +
> >> app/test-eventdev/evt_main.c | 13 +-
> >> app/test-eventdev/evt_options.c | 27 ++
> >> app/test-eventdev/evt_options.h | 12 +
> >> app/test-eventdev/evt_test.h | 6 +
> >> app/test-eventdev/test_perf_atq.c | 51 ++++
> >> app/test-eventdev/test_perf_common.c | 406
> >++++++++++++++++++++++++++-
> >> app/test-eventdev/test_perf_common.h | 16 ++ app/test-
> >> eventdev/test_perf_queue.c | 52 ++++
> >> doc/guides/tools/testeventdev.rst | 13 +
> >> 10 files changed, 592 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/app/test-eventdev/evt_common.h b/app/test-
> >> eventdev/evt_common.h index f466434459..2f301a7e79 100644
> >> --- a/app/test-eventdev/evt_common.h
> >> +++ b/app/test-eventdev/evt_common.h
> >> @@ -7,6 +7,7 @@
> >>
> >> #include <rte_common.h>
> >> #include <rte_debug.h>
> >> +#include <rte_event_crypto_adapter.h>
> >> #include <rte_eventdev.h>
> >> #include <rte_service.h>
> >>
> >> @@ -39,6 +40,7 @@ enum evt_prod_type {
> >> EVT_PROD_TYPE_SYNT, /* Producer type Synthetic i.e. CPU. */
> >> EVT_PROD_TYPE_ETH_RX_ADPTR, /* Producer type Eth Rx Adapter. */
> >> EVT_PROD_TYPE_EVENT_TIMER_ADPTR, /* Producer type Timer
> Adapter.
> >> */
> >> + EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR, /* Producer type Crypto
> >> Adapter. */
> >> EVT_PROD_TYPE_MAX,
> >> };
> >>
> >> @@ -77,6 +79,7 @@ struct evt_options {
> >> uint64_t timer_tick_nsec;
> >> uint64_t optm_timer_tick_nsec;
> >> enum evt_prod_type prod_type;
> >> + enum rte_event_crypto_adapter_mode crypto_adptr_mode;
> >> };
> >>
> >> static inline bool
> >> diff --git a/app/test-eventdev/evt_main.c
> >> b/app/test-eventdev/evt_main.c index 194c980c7a..cef0fb1382 100644
> >> --- a/app/test-eventdev/evt_main.c
> >> +++ b/app/test-eventdev/evt_main.c
> >> @@ -161,12 +161,19 @@ main(int argc, char **argv)
> >> goto mempool_destroy;
> >> }
> >> }
> >> + /* Test specific cryptodev setup */
> >> + if (test->ops.cryptodev_setup) {
> >> + if (test->ops.cryptodev_setup(test, &opt)) {
> >> + evt_err("%s: cryptodev setup failed", opt.test_name);
> >> + goto ethdev_destroy;
> >> + }
> >> + }
> >>
> >> /* Test specific eventdev setup */
> >> if (test->ops.eventdev_setup) {
> >> if (test->ops.eventdev_setup(test, &opt)) {
> >> evt_err("%s: eventdev setup failed", opt.test_name);
> >> - goto ethdev_destroy;
> >> + goto cryptodev_destroy;
> >> }
> >> }
> >>
> >> @@ -197,6 +204,10 @@ main(int argc, char **argv)
> >> if (test->ops.eventdev_destroy)
> >> test->ops.eventdev_destroy(test, &opt);
> >>
> >> +cryptodev_destroy:
> >> + if (test->ops.cryptodev_destroy)
> >> + test->ops.cryptodev_destroy(test, &opt);
> >> +
> >> ethdev_destroy:
> >> if (test->ops.ethdev_destroy)
> >> test->ops.ethdev_destroy(test, &opt); diff --git a/app/test-
> >> eventdev/evt_options.c b/app/test-eventdev/evt_options.c index
> >> 753a7dbd7d..5ad1491020 100644
> >> --- a/app/test-eventdev/evt_options.c
> >> +++ b/app/test-eventdev/evt_options.c
> >> @@ -122,6 +122,26 @@ evt_parse_timer_prod_type_burst(struct
> >> evt_options *opt,
> >> return 0;
> >> }
> >>
> >> +static int
> >> +evt_parse_crypto_prod_type(struct evt_options *opt,
> >> + const char *arg __rte_unused)
> >> +{
> >> + opt->prod_type = EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR;
> >> + return 0;
> >> +}
> >> +
> >> +static int
> >> +evt_parse_crypto_adptr_mode(struct evt_options *opt, const char *arg) {
> >> + uint8_t mode;
> >> + int ret;
> >> +
> >> + ret = parser_read_uint8(&mode, arg);
> >> + opt->crypto_adptr_mode = mode ?
> >> RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD :
> >> +
> >> RTE_EVENT_CRYPTO_ADAPTER_OP_NEW;
> >> + return ret;
> >> +}
> >> +
> >> static int
> >> evt_parse_test_name(struct evt_options *opt, const char *arg) { @@
> >> -335,6
> >> +355,7 @@ usage(char *program)
> >> "\t--queue_priority : enable queue priority\n"
> >> "\t--deq_tmo_nsec : global dequeue timeout\n"
> >> "\t--prod_type_ethdev : use ethernet device as producer.\n"
> >> + "\t--prod_type_cryptodev : use crypto device as producer.\n"
> >> "\t--prod_type_timerdev : use event timer device as
> producer.\n"
> >> "\t expity_nsec would be the timeout\n"
> >> "\t in ns.\n"
> >> @@ -345,6 +366,8 @@ usage(char *program)
> >> "\t--timer_tick_nsec : timer tick interval in ns.\n"
> >> "\t--max_tmo_nsec : max timeout interval in ns.\n"
> >> "\t--expiry_nsec : event timer expiry ns.\n"
> >> + "\t--crypto_adptr_mode : 0 for OP_NEW mode (default) and\n"
> >> + "\t 1 for OP_FORWARD mode.\n"
> >> "\t--mbuf_sz : packet mbuf size.\n"
> >> "\t--max_pkt_sz : max packet size.\n"
> >> "\t--prod_enq_burst_sz : producer enqueue burst size.\n"
> >> @@ -415,8 +438,10 @@ static struct option lgopts[] = {
> >> { EVT_QUEUE_PRIORITY, 0, 0, 0 },
> >> { EVT_DEQ_TMO_NSEC, 1, 0, 0 },
> >> { EVT_PROD_ETHDEV, 0, 0, 0 },
> >> + { EVT_PROD_CRYPTODEV, 0, 0, 0 },
> >> { EVT_PROD_TIMERDEV, 0, 0, 0 },
> >> { EVT_PROD_TIMERDEV_BURST, 0, 0, 0 },
> >> + { EVT_CRYPTO_ADPTR_MODE, 1, 0, 0 },
> >> { EVT_NB_TIMERS, 1, 0, 0 },
> >> { EVT_NB_TIMER_ADPTRS, 1, 0, 0 },
> >> { EVT_TIMER_TICK_NSEC, 1, 0, 0 },
> >> @@ -455,8 +480,10 @@ evt_opts_parse_long(int opt_idx, struct
> >> evt_options
> >> *opt)
> >> { EVT_QUEUE_PRIORITY, evt_parse_queue_priority},
> >> { EVT_DEQ_TMO_NSEC, evt_parse_deq_tmo_nsec},
> >> { EVT_PROD_ETHDEV, evt_parse_eth_prod_type},
> >> + { EVT_PROD_CRYPTODEV, evt_parse_crypto_prod_type},
> >> { EVT_PROD_TIMERDEV, evt_parse_timer_prod_type},
> >> { EVT_PROD_TIMERDEV_BURST,
> >> evt_parse_timer_prod_type_burst},
> >> + { EVT_CRYPTO_ADPTR_MODE, evt_parse_crypto_adptr_mode},
> >> { EVT_NB_TIMERS, evt_parse_nb_timers},
> >> { EVT_NB_TIMER_ADPTRS, evt_parse_nb_timer_adptrs},
> >> { EVT_TIMER_TICK_NSEC, evt_parse_timer_tick_nsec}, diff --git
> >> a/app/test-eventdev/evt_options.h b/app/test-eventdev/evt_options.h
> >> index
> >> 413d7092f0..2231c58801 100644
> >> --- a/app/test-eventdev/evt_options.h
> >> +++ b/app/test-eventdev/evt_options.h
> >> @@ -9,6 +9,7 @@
> >> #include <stdbool.h>
> >>
> >> #include <rte_common.h>
> >> +#include <rte_cryptodev.h>
> >> #include <rte_ethdev.h>
> >> #include <rte_eventdev.h>
> >> #include <rte_lcore.h>
> >> @@ -33,8 +34,10 @@
> >> #define EVT_QUEUE_PRIORITY ("queue_priority")
> >> #define EVT_DEQ_TMO_NSEC ("deq_tmo_nsec")
> >> #define EVT_PROD_ETHDEV ("prod_type_ethdev")
> >> +#define EVT_PROD_CRYPTODEV ("prod_type_cryptodev")
> >> #define EVT_PROD_TIMERDEV ("prod_type_timerdev")
> >> #define EVT_PROD_TIMERDEV_BURST ("prod_type_timerdev_burst")
> >> +#define EVT_CRYPTO_ADPTR_MODE ("crypto_adptr_mode")
> >> #define EVT_NB_TIMERS ("nb_timers")
> >> #define EVT_NB_TIMER_ADPTRS ("nb_timer_adptrs")
> >> #define EVT_TIMER_TICK_NSEC ("timer_tick_nsec")
> >> @@ -249,6 +252,8 @@ evt_prod_id_to_name(enum evt_prod_type
> prod_type)
> >> return "Ethdev Rx Adapter";
> >> case EVT_PROD_TYPE_EVENT_TIMER_ADPTR:
> >> return "Event timer adapter";
> >> + case EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR:
> >> + return "Event crypto adapter";
> >> }
> >>
> >> return "";
> >> @@ -288,6 +293,13 @@ evt_dump_producer_type(struct evt_options *opt)
> >> evt_dump("timer_tick_nsec", "%"PRIu64"",
> >> opt->timer_tick_nsec);
> >> break;
> >> + case EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR:
> >> + snprintf(name, EVT_PROD_MAX_NAME_LEN,
> >> + "Event crypto adapter producers");
> >> + evt_dump("crypto adapter mode", "%s",
> >> + opt->crypto_adptr_mode ? "OP_FORWARD" :
> >> "OP_NEW");
> >> + evt_dump("nb_cryptodev", "%u", rte_cryptodev_count());
> >> + break;
> >> }
> >> evt_dump("prod_type", "%s", name);
> >> }
> >> diff --git a/app/test-eventdev/evt_test.h
> >> b/app/test-eventdev/evt_test.h
> >index
> >> f07d2c3336..50fa474ec2 100644
> >> --- a/app/test-eventdev/evt_test.h
> >> +++ b/app/test-eventdev/evt_test.h
> >> @@ -29,6 +29,8 @@ typedef int (*evt_test_mempool_setup_t)
> >> (struct evt_test *test, struct evt_options *opt); typedef int
> >> (*evt_test_ethdev_setup_t)
> >> (struct evt_test *test, struct evt_options *opt);
> >> +typedef int (*evt_test_cryptodev_setup_t)
> >> + (struct evt_test *test, struct evt_options *opt);
> >> typedef int (*evt_test_eventdev_setup_t)
> >> (struct evt_test *test, struct evt_options *opt); typedef int
> >> (*evt_test_launch_lcores_t) @@ -39,6 +41,8 @@ typedef void
> >> (*evt_test_eventdev_destroy_t)
> >> (struct evt_test *test, struct evt_options *opt); typedef void
> >> (*evt_test_ethdev_destroy_t)
> >> (struct evt_test *test, struct evt_options *opt);
> >> +typedef void (*evt_test_cryptodev_destroy_t)
> >> + (struct evt_test *test, struct evt_options *opt);
> >> typedef void (*evt_test_mempool_destroy_t)
> >> (struct evt_test *test, struct evt_options *opt); typedef void
> >> (*evt_test_destroy_t) @@ -52,10 +56,12 @@ struct evt_test_ops {
> >> evt_test_mempool_setup_t mempool_setup;
> >> evt_test_ethdev_setup_t ethdev_setup;
> >> evt_test_eventdev_setup_t eventdev_setup;
> >> + evt_test_cryptodev_setup_t cryptodev_setup;
> >> evt_test_launch_lcores_t launch_lcores;
> >> evt_test_result_t test_result;
> >> evt_test_eventdev_destroy_t eventdev_destroy;
> >> evt_test_ethdev_destroy_t ethdev_destroy;
> >> + evt_test_cryptodev_destroy_t cryptodev_destroy;
> >> evt_test_mempool_destroy_t mempool_destroy;
> >> evt_test_destroy_t test_destroy;
> >> };
> >> diff --git a/app/test-eventdev/test_perf_atq.c b/app/test-
> >> eventdev/test_perf_atq.c index 8fd51004ee..dbb1dc8c0c 100644
> >> --- a/app/test-eventdev/test_perf_atq.c
> >> +++ b/app/test-eventdev/test_perf_atq.c
> >> @@ -48,6 +48,22 @@ perf_atq_worker(void *arg, const int
> >> enable_fwd_latency)
> >> continue;
> >> }
> >>
> >> + if (prod_crypto_type &&
> >> + (ev.event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
> >> + struct rte_crypto_op *op = ev.event_ptr;
> >> +
> >> + if (op->status == RTE_CRYPTO_OP_STATUS_SUCCESS) {
> >> + if (op->sym->m_dst == NULL)
> >> + ev.event_ptr = op->sym->m_src;
> >> + else
> >> + ev.event_ptr = op->sym->m_dst;
> >> + rte_crypto_op_free(op);
> >> + } else {
> >> + rte_crypto_op_free(op);
> >> + continue;
> >> + }
> >> + }
> >> +
> >> if (enable_fwd_latency && !prod_timer_type)
> >> /* first stage in pipeline, mark ts to compute fwd latency */
> >> atq_mark_fwd_latency(&ev);
> >> @@ -87,6 +103,25 @@ perf_atq_worker_burst(void *arg, const int
> >> enable_fwd_latency)
> >> }
> >>
> >> for (i = 0; i < nb_rx; i++) {
> >> + if (prod_crypto_type &&
> >> + (ev[i].event_type == RTE_EVENT_TYPE_CRYPTODEV))
> >> {
> >> + struct rte_crypto_op *op = ev[i].event_ptr;
> >> +
> >> + if (op->status ==
> >> + RTE_CRYPTO_OP_STATUS_SUCCESS) {
> >> + if (op->sym->m_dst == NULL)
> >> + ev[i].event_ptr =
> >> + op->sym->m_src;
> >> + else
> >> + ev[i].event_ptr =
> >> + op->sym->m_dst;
> >> + rte_crypto_op_free(op);
> >> + } else {
> >> + rte_crypto_op_free(op);
> >> + continue;
> >> + }
> >> + }
> >> +
> >> if (enable_fwd_latency && !prod_timer_type) {
> >> rte_prefetch0(ev[i+1].event_ptr);
> >> /* first stage in pipeline.
> >> @@ -254,6 +289,20 @@ perf_atq_eventdev_setup(struct evt_test *test,
> >> struct evt_options *opt)
> >> return ret;
> >> }
> >> }
> >> + } else if (opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> >> + uint8_t cdev_id, cdev_count;
> >> +
> >> + cdev_count = rte_cryptodev_count();
> >> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> >> + ret = rte_cryptodev_start(cdev_id);
> >> + if (ret) {
> >> + evt_err("Failed to start cryptodev %u",
> >> + cdev_id);
> >> + return ret;
> >> + }
> >> + }
> >> +
> >> + rte_event_crypto_adapter_start(t->crypto_adptr.id);
> >> }
> >>
> >> return 0;
> >> @@ -295,12 +344,14 @@ static const struct evt_test_ops perf_atq = {
> >> .opt_dump = perf_atq_opt_dump,
> >> .test_setup = perf_test_setup,
> >> .ethdev_setup = perf_ethdev_setup,
> >> + .cryptodev_setup = perf_cryptodev_setup,
> >> .mempool_setup = perf_mempool_setup,
> >> .eventdev_setup = perf_atq_eventdev_setup,
> >> .launch_lcores = perf_atq_launch_lcores,
> >> .eventdev_destroy = perf_eventdev_destroy,
> >> .mempool_destroy = perf_mempool_destroy,
> >> .ethdev_destroy = perf_ethdev_destroy,
> >> + .cryptodev_destroy = perf_cryptodev_destroy,
> >> .test_result = perf_test_result,
> >> .test_destroy = perf_test_destroy,
> >> };
> >> diff --git a/app/test-eventdev/test_perf_common.c b/app/test-
> >> eventdev/test_perf_common.c index 9b73874151..7b964ab8dc 100644
> >> --- a/app/test-eventdev/test_perf_common.c
> >> +++ b/app/test-eventdev/test_perf_common.c
> >> @@ -6,6 +6,8 @@
> >>
> >> #include "test_perf_common.h"
> >>
> >> +#define NB_CRYPTODEV_DESCRIPTORS 128
> >> +
> >> int
> >> perf_test_result(struct evt_test *test, struct evt_options *opt) {
> >> @@ -272,6
> >> +274,121 @@ perf_event_timer_producer_burst(void *arg)
> >> return 0;
> >> }
> >>
> >> +static inline void
> >> +crypto_adapter_enq_op_new(struct prod_data *p) {
> >> + struct test_perf *t = p->t;
> >> + const uint32_t nb_flows = t->nb_flows;
> >> + const uint64_t nb_pkts = t->nb_pkts;
> >> + struct rte_mempool *pool = t->pool;
> >> + struct rte_crypto_sym_op *sym_op;
> >> + struct evt_options *opt = t->opt;
> >> + uint32_t flow_counter = 0;
> >> + struct rte_crypto_op *op;
> >> + struct rte_mbuf *m;
> >> + uint64_t count = 0;
> >> + uint16_t len;
> >> +
> >> + if (opt->verbose_level > 1)
> >> + printf("%s(): lcore %d queue %d cdev_id %u cdev_qp_id %u\n",
> >> + __func__, rte_lcore_id(), p->queue_id, p->cdev_id,
> >> + p->cdev_qp_id);
> >> +
> >> + len = opt->mbuf_sz ? opt->mbuf_sz : RTE_ETHER_MIN_LEN;
> >> +
> >> + while (count < nb_pkts && t->done == false) {
> >> + m = rte_pktmbuf_alloc(pool);
> >> + if (m == NULL)
> >> + continue;
> >> +
> >> + rte_pktmbuf_append(m, len);
> >> + op = rte_crypto_op_alloc(t->crypto_adptr.op_pool,
> >> + RTE_CRYPTO_OP_TYPE_SYMMETRIC);
> >> + sym_op = op->sym;
> >> + sym_op->m_src = m;
> >> + sym_op->cipher.data.offset = 0;
> >> + sym_op->cipher.data.length = len;
> >> + rte_crypto_op_attach_sym_session(
> >> + op, p->crypto_sess[flow_counter++ % nb_flows]);
> >> + while (rte_cryptodev_enqueue_burst(p->cdev_id, p-
> >> >cdev_qp_id,
> >> + &op, 1) != 1) {
> >> + if (t->done)
> >> + break;
> >> + rte_pause();
> >> + }
> >> + count++;
> >> + }
> >> +}
> >> +
> >> +static inline void
> >> +crypto_adapter_enq_op_fwd(struct prod_data *p) {
> >> + const uint8_t dev_id = p->dev_id;
> >> + const uint8_t port = p->port_id;
> >> + struct test_perf *t = p->t;
> >> + const uint32_t nb_flows = t->nb_flows;
> >> + const uint64_t nb_pkts = t->nb_pkts;
> >> + struct rte_mempool *pool = t->pool;
> >> + struct evt_options *opt = t->opt;
> >> + struct rte_crypto_sym_op *sym_op;
> >> + uint32_t flow_counter = 0;
> >> + struct rte_crypto_op *op;
> >> + struct rte_event ev;
> >> + struct rte_mbuf *m;
> >> + uint64_t count = 0;
> >> + uint16_t len;
> >> +
> >> + if (opt->verbose_level > 1)
> >> + printf("%s(): lcore %d port %d queue %d cdev_id %u cdev_qp_id
> >> %u\n",
> >> + __func__, rte_lcore_id(), port, p->queue_id, p->cdev_id,
> >> + p->cdev_qp_id);
> >> +
> >> + ev.event = 0;
> >> + ev.op = RTE_EVENT_OP_NEW;
> >> + ev.queue_id = p->queue_id;
> >> + ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
> >> + ev.event_type = RTE_EVENT_TYPE_CPU;
> >> + len = opt->mbuf_sz ? opt->mbuf_sz : RTE_ETHER_MIN_LEN;
> >> +
> >> + while (count < nb_pkts && t->done == false) {
> >> + m = rte_pktmbuf_alloc(pool);
> >> + if (m == NULL)
> >> + continue;
> >> +
> >> + rte_pktmbuf_append(m, len);
> >> + op = rte_crypto_op_alloc(t->crypto_adptr.op_pool,
> >> + RTE_CRYPTO_OP_TYPE_SYMMETRIC);
> >> + sym_op = op->sym;
> >> + sym_op->m_src = m;
> >> + sym_op->cipher.data.offset = 0;
> >> + sym_op->cipher.data.length = len;
> >> + rte_crypto_op_attach_sym_session(
> >> + op, p->crypto_sess[flow_counter++ % nb_flows]);
> >> + ev.event_ptr = op;
> >> + while (rte_event_crypto_adapter_enqueue(dev_id, port, &ev, 1)
> >> !=
> >> + 1) {
> >> + if (t->done)
> >> + break;
> >> + rte_pause();
> >> + }
> >> + count++;
> >> + }
> >> +}
> >> +
> >> +static inline int
> >> +perf_event_crypto_producer(void *arg) {
> >> + struct prod_data *p = arg;
> >> + struct evt_options *opt = p->t->opt;
> >> +
> >> + if (opt->crypto_adptr_mode ==
> >> RTE_EVENT_CRYPTO_ADAPTER_OP_NEW)
> >> + crypto_adapter_enq_op_new(p);
> >> + else
> >> + crypto_adapter_enq_op_fwd(p);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> static int
> >> perf_producer_wrapper(void *arg)
> >> {
> >> @@ -298,6 +415,8 @@ perf_producer_wrapper(void *arg)
> >> else if (t->opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR
> &&
> >> t->opt->timdev_use_burst)
> >> return perf_event_timer_producer_burst(arg);
> >> + else if (t->opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
> >> + return perf_event_crypto_producer(arg);
> >> return 0;
> >> }
> >>
> >> @@ -405,8 +524,10 @@ perf_launch_lcores(struct evt_test *test, struct
> >> evt_options *opt,
> >> if (remaining <= 0) {
> >> t->result = EVT_TEST_SUCCESS;
> >> if (opt->prod_type == EVT_PROD_TYPE_SYNT
> >> ||
> >> - opt->prod_type ==
> >> -
> >> EVT_PROD_TYPE_EVENT_TIMER_ADPTR) {
> >> + opt->prod_type ==
> >> +
> >> EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
> >> + opt->prod_type ==
> >> +
> >> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> >> t->done = true;
> >> break;
> >> }
> >> @@ -415,7 +536,8 @@ perf_launch_lcores(struct evt_test *test, struct
> >> evt_options *opt,
> >>
> >> if (new_cycles - dead_lock_cycles > dead_lock_sample &&
> >> (opt->prod_type == EVT_PROD_TYPE_SYNT ||
> >> - opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR))
> >> {
> >> + opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR
> >> ||
> >> + opt->prod_type ==
> >> EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)) {
> >> remaining = t->outstand_pkts - processed_pkts(t);
> >> if (dead_lock_remaining == remaining) {
> >> rte_event_dev_dump(opt->dev_id, stdout);
> @@ -537,6 +659,96 @@
> >> perf_event_timer_adapter_setup(struct test_perf *t)
> >> return 0;
> >> }
> >>
> >> +static int
> >> +perf_event_crypto_adapter_setup(struct test_perf *t,
> >> + struct rte_event_port_conf port_conf) {
> >> + struct evt_options *opt = t->opt;
> >> + uint8_t cdev_id, cdev_count;
> >> + int ret;
> >> +
> >> + t->crypto_adptr.id = 0;
> >> + ret = rte_event_crypto_adapter_create(t->crypto_adptr.id, opt->dev_id,
> >> + &port_conf, 0);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + cdev_count = rte_cryptodev_count();
> >> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> >> + uint32_t cap;
> >> +
> >> + ret = rte_event_crypto_adapter_caps_get(opt->dev_id,
> >> cdev_id,
> >> + &cap);
> >> + if (ret) {
> >> + evt_err("Failed to get crypto adapter capabilities");
> >> + return ret;
> >> + }
> >> +
> >> + if (((opt->crypto_adptr_mode ==
> >> + RTE_EVENT_CRYPTO_ADAPTER_OP_NEW) &&
> >> + !(cap &
> >> +
> >> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW)) ||
> >> + ((opt->crypto_adptr_mode ==
> >> + RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD) &&
> >> + !(cap &
> >> +
> >> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD))) {
> >> + evt_err("crypto adapter %s mode unsupported\n",
> >> + opt->crypto_adptr_mode ? "OP_FORWARD" :
> >> + "OP_NEW");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + if (!(cap &
> >> +
> >> RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA)) {
> >> + evt_err("Storing crypto session not supported");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + if (cap &
> >> +
> >> RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND) {
> >> + struct rte_event response_info;
> >> +
> >> + response_info.event = 0;
> >> + ret = rte_event_crypto_adapter_queue_pair_add(
> >> + t->crypto_adptr.id, cdev_id, -1,
> >> + &response_info);
> >> + } else {
> >> + ret = rte_event_crypto_adapter_queue_pair_add(
> >> + t->crypto_adptr.id, cdev_id, -1, NULL);
> >> + }
> >> + if (ret)
> >> + return ret;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static struct rte_cryptodev_sym_session *
> >> +cryptodev_session_create(struct prod_data *p, struct test_perf *t) {
> >> + struct rte_crypto_sym_xform cipher_xform;
> >> + struct rte_cryptodev_sym_session *sess;
> >> +
> >> + cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
> >> + cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
> >> + cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
> >> + cipher_xform.next = NULL;
> >> +
> >> + sess = rte_cryptodev_sym_session_create(t->crypto_adptr.sess_pool);
> >> + if (sess == NULL) {
> >> + evt_err("Failed to create sym session");
> >> + return NULL;
> >> + }
> >> +
> >> + if (rte_cryptodev_sym_session_init(p->cdev_id, sess, &cipher_xform,
> >> + t->crypto_adptr.sess_priv_pool)) {
> >> + evt_err("Failed to init session");
> >> + return NULL;
> >> + }
> >> +
> >> + return sess;
> >> +}
> >> +
> >> int
> >> perf_event_dev_port_setup(struct evt_test *test, struct evt_options *opt,
> >> uint8_t stride, uint8_t nb_queues, @@ -598,6
> +810,55 @@
> >> perf_event_dev_port_setup(struct evt_test *test, struct evt_options
> >> *opt,
> >> ret = perf_event_timer_adapter_setup(t);
> >> if (ret)
> >> return ret;
> >> + } else if (opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> >> + uint8_t cdev_id = 0;
> >> + uint16_t qp_id = 0;
> >> +
> >> + prod = 0;
> >> + for (; port < perf_nb_event_ports(opt); port++) {
> >> + struct rte_cryptodev_sym_session *crypto_sess;
> >> + union rte_event_crypto_metadata m_data;
> >> + struct prod_data *p = &t->prod[port];
> >> + uint32_t flow_id;
> >> +
> >> + if (qp_id == rte_cryptodev_queue_pair_count(cdev_id))
> >> {
> >> + cdev_id++;
> >> + qp_id = 0;
> >> + }
> >> +
> >> + p->dev_id = opt->dev_id;
> >> + p->port_id = port;
> >> + p->queue_id = prod * stride;
> >> + p->cdev_id = cdev_id;
> >> + p->cdev_qp_id = qp_id;
> >> + p->crypto_sess = rte_zmalloc_socket(
> >> + NULL, sizeof(crypto_sess) * t->nb_flows,
> >> + RTE_CACHE_LINE_SIZE, opt->socket_id);
> >> +
> >> + m_data.request_info.cdev_id = p->cdev_id;
> >> + m_data.request_info.queue_pair_id = p->cdev_qp_id;
> >> + m_data.response_info.op = RTE_EVENT_OP_NEW;
> >> + m_data.response_info.sched_type =
> >> RTE_SCHED_TYPE_ATOMIC;
> >> + m_data.response_info.event_type =
> >> RTE_EVENT_TYPE_CPU;
> >> + m_data.response_info.queue_id = p->queue_id;
> >> + for (flow_id = 0; flow_id < t->nb_flows; flow_id++) {
> >> + crypto_sess = cryptodev_session_create(p, t);
> >> + if (crypto_sess == NULL)
> >> + return -ENOMEM;
> >> +
> >> + m_data.response_info.flow_id = flow_id;
> >> + rte_cryptodev_sym_session_set_user_data(
> >> + crypto_sess, &m_data,
> >> sizeof(m_data));
> >> + p->crypto_sess[flow_id] = crypto_sess;
> >> + }
> >> + p->t = t;
> >> + qp_id++;
> >> + prod++;
> >> + }
> >> +
> >> + ret = perf_event_crypto_adapter_setup(t, *port_conf);
> >> + if (ret)
> >> + return ret;
> >> } else {
> >> prod = 0;
> >> for ( ; port < perf_nb_event_ports(opt); port++) { @@ -659,7
> >> +920,8 @@ perf_opt_check(struct evt_options *opt, uint64_t nb_queues)
> >> }
> >>
> >> if (opt->prod_type == EVT_PROD_TYPE_SYNT ||
> >> - opt->prod_type ==
> >> EVT_PROD_TYPE_EVENT_TIMER_ADPTR) {
> >> + opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR ||
> >> + opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> >> /* Validate producer lcores */
> >> if (evt_lcores_has_overlap(opt->plcores,
> >> rte_get_main_lcore())) {
> >> @@ -767,8 +1029,7 @@ perf_ethdev_setup(struct evt_test *test, struct
> >> evt_options *opt)
> >> },
> >> };
> >>
> >> - if (opt->prod_type == EVT_PROD_TYPE_SYNT ||
> >> - opt->prod_type ==
> >> EVT_PROD_TYPE_EVENT_TIMER_ADPTR)
> >> + if (opt->prod_type != EVT_PROD_TYPE_ETH_RX_ADPTR)
> >> return 0;
> >>
> >> if (!rte_eth_dev_count_avail()) {
> >> @@ -841,6 +1102,139 @@ void perf_ethdev_destroy(struct evt_test
> >> *test, struct evt_options *opt)
> >> }
> >> }
> >>
> >> +int
> >> +perf_cryptodev_setup(struct evt_test *test, struct evt_options *opt) {
> >> + uint8_t cdev_count, cdev_id, nb_plcores, nb_qps;
> >> + struct test_perf *t = evt_test_priv(test);
> >> + unsigned int max_session_size;
> >> + uint32_t nb_sessions;
> >> + int ret;
> >> +
> >> + if (opt->prod_type != EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
> >> + return 0;
> >> +
> >> + cdev_count = rte_cryptodev_count();
> >> + if (cdev_count == 0) {
> >> + evt_err("No crypto devices available\n");
> >> + return -ENODEV;
> >> + }
> >> +
> >> + t->crypto_adptr.op_pool = rte_crypto_op_pool_create(
> >> + "crypto_op_pool", RTE_CRYPTO_OP_TYPE_SYMMETRIC, opt-
> >> >pool_sz,
> >> + 128, 0, rte_socket_id());
> >> + if (t->crypto_adptr.op_pool == NULL) {
> >> + evt_err("Failed to create crypto op pool");
> >> + return -ENOMEM;
> >> + }
> >> +
> >> + nb_sessions = evt_nr_active_lcores(opt->plcores) * t->nb_flows;
> >> + t->crypto_adptr.sess_pool = rte_cryptodev_sym_session_pool_create(
> >> + "ca_sess_pool", nb_sessions, 0, 0,
> >> + sizeof(union rte_event_crypto_metadata), SOCKET_ID_ANY);
> >> + if (t->crypto_adptr.sess_pool == NULL) {
> >> + evt_err("Failed to create sym session pool");
> >> + ret = -ENOMEM;
> >> + goto err;
> >> + }
> >> +
> >> + max_session_size = 0;
> >> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> >> + unsigned int session_size;
> >> +
> >> + session_size =
> >> + rte_cryptodev_sym_get_private_session_size(cdev_id);
> >> + if (session_size > max_session_size)
> >> + max_session_size = session_size;
> >> + }
> >> + max_session_size += sizeof(union rte_event_crypto_metadata);
> >> + t->crypto_adptr.sess_priv_pool = rte_mempool_create(
> >> + "ca_sess_priv_pool", nb_sessions, max_session_size, 0, 0,
> >> NULL,
> >> + NULL, NULL, NULL, SOCKET_ID_ANY, 0);
> >> + if (t->crypto_adptr.sess_priv_pool == NULL) {
> >> + evt_err("failed to create sym session private pool");
> >> + ret = -ENOMEM;
> >> + goto err;
> >> + }
> >> +
> >> + nb_plcores = evt_nr_active_lcores(opt->plcores);
> >> + nb_qps = (nb_plcores % cdev_count) ? (nb_plcores / cdev_count) + 1 :
> >> + nb_plcores / cdev_count;
> >> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> >> + struct rte_cryptodev_qp_conf qp_conf;
> >> + struct rte_cryptodev_config conf;
> >> + struct rte_cryptodev_info info;
> >> + int qp_id;
> >> +
> >> + rte_cryptodev_info_get(cdev_id, &info);
> >> + if (nb_qps > info.max_nb_queue_pairs) {
> >> + evt_err("Not enough queue pairs per cryptodev (%u)",
> >> + nb_qps);
> >> + ret = -EINVAL;
> >> + goto err;
> >> + }
> >> +
> >> + conf.nb_queue_pairs = nb_qps;
> >> + conf.socket_id = SOCKET_ID_ANY;
> >> + conf.ff_disable = RTE_CRYPTODEV_FF_SECURITY;
> >> +
> >> + ret = rte_cryptodev_configure(cdev_id, &conf);
> >> + if (ret) {
> >> + evt_err("Failed to configure cryptodev (%u)", cdev_id);
> >> + goto err;
> >> + }
> >> +
> >> + qp_conf.nb_descriptors = NB_CRYPTODEV_DESCRIPTORS;
> >> + qp_conf.mp_session = t->crypto_adptr.sess_pool;
> >> + qp_conf.mp_session_private = t->crypto_adptr.sess_priv_pool;
> >> +
> >> + for (qp_id = 0; qp_id < conf.nb_queue_pairs; qp_id++) {
> >> + ret = rte_cryptodev_queue_pair_setup(
> >> + cdev_id, qp_id, &qp_conf,
> >> + rte_cryptodev_socket_id(cdev_id));
> >> + if (ret) {
> >> + evt_err("Failed to setup queue pairs on
> >> cryptodev %u\n",
> >> + cdev_id);
> >> + goto err;
> >> + }
> >> + }
> >> + }
> >> +
> >> + return 0;
> >> +err:
> >> + rte_mempool_free(t->crypto_adptr.op_pool);
> >> + rte_mempool_free(t->crypto_adptr.sess_pool);
> >> + rte_mempool_free(t->crypto_adptr.sess_priv_pool);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +void
> >> +perf_cryptodev_destroy(struct evt_test *test, struct evt_options
> >> +*opt) {
> >> + uint8_t cdev_id, cdev_count = rte_cryptodev_count();
> >> + struct test_perf *t = evt_test_priv(test);
> >> +
> >> + RTE_SET_USED(opt);
> >> +
> >> + if (opt->prod_type != EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR)
> >> + return;
> >> +
> >> + rte_event_crypto_adapter_stop(t->crypto_adptr.id);
> >> +
> >> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> >> + rte_cryptodev_stop(cdev_id);
> >> + rte_event_crypto_adapter_queue_pair_del(t->crypto_adptr.id,
> >> + cdev_id, -1);
> >> + }
> >> +
> >> + rte_event_crypto_adapter_free(t->crypto_adptr.id);
> >> +
> >> + rte_mempool_free(t->crypto_adptr.op_pool);
> >> + rte_mempool_free(t->crypto_adptr.sess_pool);
> >> + rte_mempool_free(t->crypto_adptr.sess_priv_pool);
> >> +}
> >> +
> >> int
> >> perf_mempool_setup(struct evt_test *test, struct evt_options *opt)
> >> { diff --git a/app/test-eventdev/test_perf_common.h b/app/test-
> >> eventdev/test_perf_common.h index 14dcf80429..d9ad3a0b0d 100644
> >> --- a/app/test-eventdev/test_perf_common.h
> >> +++ b/app/test-eventdev/test_perf_common.h
> >> @@ -9,9 +9,11 @@
> >> #include <stdbool.h>
> >> #include <unistd.h>
> >>
> >> +#include <rte_cryptodev.h>
> >> #include <rte_cycles.h>
> >> #include <rte_ethdev.h>
> >> #include <rte_eventdev.h>
> >> +#include <rte_event_crypto_adapter.h>
> >> #include <rte_event_eth_rx_adapter.h> #include
> >> <rte_event_timer_adapter.h> #include <rte_lcore.h> @@ -37,9 +39,18
> >> @@ struct prod_data {
> >> uint8_t dev_id;
> >> uint8_t port_id;
> >> uint8_t queue_id;
> >> + uint8_t cdev_id;
> >> + uint16_t cdev_qp_id;
> >> + struct rte_cryptodev_sym_session **crypto_sess;
> >> struct test_perf *t;
> >> } __rte_cache_aligned;
> >>
> >> +struct crypto_adptr_data {
> >> + uint8_t id;
> >> + struct rte_mempool *op_pool;
> >> + struct rte_mempool *sess_pool;
> >> + struct rte_mempool *sess_priv_pool; };
> >>
> >> struct test_perf {
> >> /* Don't change the offset of "done". Signal handler use this
> >> memory @@ -58,6 +69,7 @@ struct test_perf {
> >> uint8_t sched_type_list[EVT_MAX_STAGES] __rte_cache_aligned;
> >> struct rte_event_timer_adapter *timer_adptr[
> >> RTE_EVENT_TIMER_ADAPTER_NUM_MAX]
> >> __rte_cache_aligned;
> >> + struct crypto_adptr_data crypto_adptr;
> >> } __rte_cache_aligned;
> >>
> >> struct perf_elt {
> >> @@ -81,6 +93,8 @@ struct perf_elt {
> >> const uint8_t port = w->port_id;\
> >> const uint8_t prod_timer_type = \
> >> opt->prod_type == EVT_PROD_TYPE_EVENT_TIMER_ADPTR;\
> >> + const uint8_t prod_crypto_type = \
> >> + opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR;\
> >> uint8_t *const sched_type_list = &t->sched_type_list[0];\
> >> struct rte_mempool *const pool = t->pool;\
> >> const uint8_t nb_stages = t->opt->nb_stages;\ @@ -154,6 +168,7 @@
> >> int perf_test_result(struct evt_test *test, struct evt_options *opt);
> >> int perf_opt_check(struct evt_options *opt, uint64_t nb_queues); int
> >> perf_test_setup(struct evt_test *test, struct evt_options *opt); int
> >> perf_ethdev_setup(struct evt_test *test, struct evt_options *opt);
> >> +int perf_cryptodev_setup(struct evt_test *test, struct evt_options
> >> +*opt);
> >> int perf_mempool_setup(struct evt_test *test, struct evt_options
> >> *opt); int perf_event_dev_port_setup(struct evt_test *test, struct
> evt_options *opt,
> >> uint8_t stride, uint8_t nb_queues, @@ -164,6
> +179,7 @@ int
> >> perf_launch_lcores(struct evt_test *test, struct evt_options *opt,
> >> void perf_opt_dump(struct evt_options *opt, uint8_t nb_queues); void
> >> perf_test_destroy(struct evt_test *test, struct evt_options *opt);
> >> void perf_eventdev_destroy(struct evt_test *test, struct evt_options
> >> *opt);
> >> +void perf_cryptodev_destroy(struct evt_test *test, struct
> >> +evt_options *opt);
> >> void perf_ethdev_destroy(struct evt_test *test, struct evt_options
> >> *opt); void perf_mempool_destroy(struct evt_test *test, struct
> >> evt_options *opt);
> >>
> >> diff --git a/app/test-eventdev/test_perf_queue.c b/app/test-
> >> eventdev/test_perf_queue.c index f4ea3a795f..5657c8b3cd 100644
> >> --- a/app/test-eventdev/test_perf_queue.c
> >> +++ b/app/test-eventdev/test_perf_queue.c
> >> @@ -49,6 +49,23 @@ perf_queue_worker(void *arg, const int
> >> enable_fwd_latency)
> >> rte_pause();
> >> continue;
> >> }
> >> +
> >> + if (prod_crypto_type &&
> >> + (ev.event_type == RTE_EVENT_TYPE_CRYPTODEV)) {
> >> + struct rte_crypto_op *op = ev.event_ptr;
> >> +
> >> + if (op->status == RTE_CRYPTO_OP_STATUS_SUCCESS) {
> >> + if (op->sym->m_dst == NULL)
> >> + ev.event_ptr = op->sym->m_src;
> >> + else
> >> + ev.event_ptr = op->sym->m_dst;
> >> + rte_crypto_op_free(op);
> >> + } else {
> >> + rte_crypto_op_free(op);
> >> + continue;
> >> + }
> >> + }
> >> +
> >> if (enable_fwd_latency && !prod_timer_type)
> >> /* first q in pipeline, mark timestamp to compute fwd latency */
> >> mark_fwd_latency(&ev, nb_stages); @@ -88,6 +105,25
> @@
> >> perf_queue_worker_burst(void *arg, const int
> >> enable_fwd_latency)
> >> }
> >>
> >> for (i = 0; i < nb_rx; i++) {
> >> + if (prod_crypto_type &&
> >> + (ev[i].event_type == RTE_EVENT_TYPE_CRYPTODEV))
> >> {
> >> + struct rte_crypto_op *op = ev[i].event_ptr;
> >> +
> >> + if (op->status ==
> >> + RTE_CRYPTO_OP_STATUS_SUCCESS) {
> >> + if (op->sym->m_dst == NULL)
> >> + ev[i].event_ptr =
> >> + op->sym->m_src;
> >> + else
> >> + ev[i].event_ptr =
> >> + op->sym->m_dst;
> >> + rte_crypto_op_free(op);
> >> + } else {
> >> + rte_crypto_op_free(op);
> >> + continue;
> >> + }
> >> + }
> >> +
> >> if (enable_fwd_latency && !prod_timer_type) {
> >> rte_prefetch0(ev[i+1].event_ptr);
> >> /* first queue in pipeline.
> >> @@ -269,6 +305,20 @@ perf_queue_eventdev_setup(struct evt_test *test,
> >> struct evt_options *opt)
> >> return ret;
> >> }
> >> }
> >> + } else if (opt->prod_type == EVT_PROD_TYPE_EVENT_CRYPTO_ADPTR) {
> >> + uint8_t cdev_id, cdev_count;
> >> +
> >> + cdev_count = rte_cryptodev_count();
> >> + for (cdev_id = 0; cdev_id < cdev_count; cdev_id++) {
> >> + ret = rte_cryptodev_start(cdev_id);
> >> + if (ret) {
> >> + evt_err("Failed to start cryptodev %u",
> >> + cdev_id);
> >> + return ret;
> >> + }
> >> + }
> >> +
> >> + rte_event_crypto_adapter_start(t->crypto_adptr.id);
> >> }
> >>
> >> return 0;
> >> @@ -311,11 +361,13 @@ static const struct evt_test_ops perf_queue = {
> >> .test_setup = perf_test_setup,
> >> .mempool_setup = perf_mempool_setup,
> >> .ethdev_setup = perf_ethdev_setup,
> >> + .cryptodev_setup = perf_cryptodev_setup,
> >> .eventdev_setup = perf_queue_eventdev_setup,
> >> .launch_lcores = perf_queue_launch_lcores,
> >> .eventdev_destroy = perf_eventdev_destroy,
> >> .mempool_destroy = perf_mempool_destroy,
> >> .ethdev_destroy = perf_ethdev_destroy,
> >> + .cryptodev_destroy = perf_cryptodev_destroy,
> >> .test_result = perf_test_result,
> >> .test_destroy = perf_test_destroy,
> >> };
> >> diff --git a/doc/guides/tools/testeventdev.rst
> >> b/doc/guides/tools/testeventdev.rst
> >> index 48efb9ea6e..f7d813226d 100644
> >> --- a/doc/guides/tools/testeventdev.rst
> >> +++ b/doc/guides/tools/testeventdev.rst
> >> @@ -120,6 +120,10 @@ The following are the application command-line
> >> options:
> >>
> >> Use burst mode event timer adapter as producer.
> >>
> >> +* ``--prod_type_cryptodev``
> >> +
> >> + Use crypto device as producer.
> >> +
> >> * ``--timer_tick_nsec``
> >>
> >> Used to dictate number of nano seconds between bucket
> >> traversal of the @@ -148,6 +152,11 @@ The following are the
> >> application command-line
> >> options:
> >> timeout is out of the supported range of event device it will be
> >> adjusted to the highest/lowest supported dequeue timeout supported.
> >>
> >> +* ``--crypto_adptr_mode``
> >> +
> >> + Set crypto adapter mode. Use 0 for OP_NEW (default) and 1 for
> >> + OP_FORWARD mode.
> >> +
> >> * ``--mbuf_sz``
> >>
> >> Set packet mbuf size. Can be used to configure Jumbo Frames.
> >> Only @@ -
> >> 420,6 +429,7 @@ Supported application command line options are
> following::
> >> --prod_type_ethdev
> >> --prod_type_timerdev_burst
> >> --prod_type_timerdev
> >> + --prod_type_cryptodev
> >> --prod_enq_burst_sz
> >> --timer_tick_nsec
> >> --max_tmo_nsec
> >> @@ -427,6 +437,7 @@ Supported application command line options are
> >> following::
> >> --nb_timers
> >> --nb_timer_adptrs
> >> --deq_tmo_nsec
> >> + --crypto_adptr_mode
> >>
> >> Example
> >> ^^^^^^^
> >> @@ -529,12 +540,14 @@ Supported application command line options are
> >> following::
> >> --prod_type_ethdev
> >> --prod_type_timerdev_burst
> >> --prod_type_timerdev
> >> + --prod_type_cryptodev
> >> --timer_tick_nsec
> >> --max_tmo_nsec
> >> --expiry_nsec
> >> --nb_timers
> >> --nb_timer_adptrs
> >> --deq_tmo_nsec
> >> + --crypto_adptr_mode
> >>
> >> Example
> >> ^^^^^^^
> >> --
> >> 2.25.1
next prev parent reply other threads:[~2022-01-03 8:46 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-20 19:53 [PATCH] " Shijith Thotton
2021-12-21 8:51 ` [PATCH v2] " Shijith Thotton
2021-12-30 11:56 ` Gujjar, Abhinandan S
2022-01-03 6:04 ` Shijith Thotton
2022-01-03 8:46 ` Gujjar, Abhinandan S [this message]
2022-01-03 9:14 ` Shijith Thotton
2022-01-04 15:28 ` Aaron Conole
2022-01-04 15:49 ` [EXT] " Shijith Thotton
2022-01-04 10:30 ` [PATCH v3] " Shijith Thotton
2022-01-21 12:25 ` Jerin Jacob
2022-01-23 16:56 ` Gujjar, Abhinandan S
2022-01-23 18:44 ` Gujjar, Abhinandan S
2022-01-24 6:09 ` Shijith Thotton
2022-01-24 6:59 ` Shijith Thotton
2022-01-25 14:15 ` Gujjar, Abhinandan S
2022-01-25 13:39 ` Gujjar, Abhinandan S
2022-02-08 17:00 ` Shijith Thotton
2022-02-14 15:26 ` Jerin Jacob
2022-02-14 15:31 ` Gujjar, Abhinandan S
2022-02-08 16:33 ` [PATCH v4] " Shijith Thotton
2022-02-15 6:03 ` Gujjar, Abhinandan S
2022-02-15 16:08 ` Shijith Thotton
2022-02-15 16:46 ` Gujjar, Abhinandan S
2022-02-15 16:56 ` [PATCH v5] " Shijith Thotton
2022-02-16 4:47 ` Gujjar, Abhinandan S
2022-02-16 7:08 ` Shijith Thotton
2022-02-16 7:49 ` Gujjar, Abhinandan S
2022-02-16 8:44 ` Jerin Jacob
2022-02-16 8:54 ` Jerin Jacob
2022-02-17 5:33 ` Gujjar, Abhinandan S
2022-02-21 13:10 ` Van Haaren, Harry
2022-02-22 7:03 ` Shijith Thotton
2022-02-23 9:02 ` Gujjar, Abhinandan S
2022-02-23 10:02 ` Shijith Thotton
2022-02-23 10:13 ` Van Haaren, Harry
2022-02-23 16:33 ` Gujjar, Abhinandan S
2022-02-23 17:02 ` Shijith Thotton
2022-02-17 6:56 ` [EXT] " Akhil Goyal
2022-02-18 12:00 ` Shijith Thotton
2022-02-18 12:11 ` [PATCH v6] " Shijith Thotton
2022-02-24 4:46 ` [PATCH v7] " Shijith Thotton
2022-02-24 6:18 ` Gujjar, Abhinandan S
2022-02-24 7:58 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH0PR11MB4824A15D330EF8903BE7CFD4E8499@PH0PR11MB4824.namprd11.prod.outlook.com \
--to=abhinandan.gujjar@intel.com \
--cc=aconole@redhat.com \
--cc=anoobj@marvell.com \
--cc=dev@dpdk.org \
--cc=dpdklab@iol.unh.edu \
--cc=gakhil@marvell.com \
--cc=jerinj@marvell.com \
--cc=pbhagavatula@marvell.com \
--cc=sthotton@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).