From: Shijith Thotton <sthotton@marvell.com>
To: Shijith Thotton <sthotton@marvell.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Naga Harish K S V <s.v.naga.harish.k@intel.com>
Subject: RE: [RFC PATCH] eventdev: adapter API to configure multiple Rx queues
Date: Thu, 19 Dec 2024 07:40:11 +0000 [thread overview]
Message-ID: <PH0PR18MB44257D45A1336A89C554C96CD9062@PH0PR18MB4425.namprd18.prod.outlook.com> (raw)
In-Reply-To: <20241219073147.1719079-1-sthotton@marvell.com>
>This RFC introduces a new API, rte_event_eth_rx_adapter_queues_add(),
>designed to enhance the flexibility of configuring multiple Rx queues
>in eventdev Rx adapter.
>
>The existing rte_event_eth_rx_adapter_queue_add() API supports adding
>multiple queues by specifying rx_queue_id = -1, but it lacks the ability
>to apply specific configurations to each of the added queues.
>
>The proposed API, rte_event_eth_rx_adapter_queues_add, addresses this
>limitation by:
>
>- Enabling users to specify an array of rx_queue_id values alongside
> individual configurations for each queue.
>
>- Supporting a nb_rx_queues argument to define the number of queues to
> configure. When set to 0, the API applies a common configuration to
> all queues, similar to the existing rx_queue_id = -1 behavior.
>
>This enhancement allows for more granular control when configuring
>multiple Rx queues. Additionally, the API can act as a replacement for
>the older API, offering both flexibility and improved functionality.
>
>Signed-off-by: Shijith Thotton <sthotton@marvell.com>
>---
> lib/eventdev/eventdev_pmd.h | 34 +++++++++++++++++++++++++
> lib/eventdev/rte_event_eth_rx_adapter.h | 34
>+++++++++++++++++++++++++
> 2 files changed, 68 insertions(+)
>
>diff --git a/lib/eventdev/eventdev_pmd.h b/lib/eventdev/eventdev_pmd.h
>index 36148f8d86..2e458a9779 100644
>--- a/lib/eventdev/eventdev_pmd.h
>+++ b/lib/eventdev/eventdev_pmd.h
>@@ -25,6 +25,7 @@
> #include <rte_mbuf_dyn.h>
>
> #include "event_timer_adapter_pmd.h"
>+#include "rte_event_eth_rx_adapter.h"
> #include "rte_eventdev.h"
>
> #ifdef __cplusplus
>@@ -708,6 +709,37 @@ typedef int
>(*eventdev_eth_rx_adapter_queue_add_t)(
> int32_t rx_queue_id,
> const struct rte_event_eth_rx_adapter_queue_conf
>*queue_conf);
>
>+/**
>+ * Add ethernet Rx queues to event device. This callback is invoked if
>+ * the caps returned from rte_eventdev_eth_rx_adapter_caps_get(,
>eth_port_id)
>+ * has RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT set.
>+ *
>+ * @param dev
>+ * Event device pointer
>+ *
>+ * @param eth_dev
>+ * Ethernet device pointer
>+ *
>+ * @param rx_queue_id
>+ * Ethernet device receive queue index array
>+ *
>+ * @param queue_conf
>+ * Additional configuration structure array
>+ *
>+ * @param nb_rx_queues
>+ * Number of ethernet device receive queues
>+ *
>+ * @return
>+ * - 0: Success, ethernet receive queues added successfully.
>+ * - <0: Error code returned by the driver function.
>+ */
>+typedef int (*eventdev_eth_rx_adapter_queues_add_t)(
>+ const struct rte_eventdev *dev,
>+ const struct rte_eth_dev *eth_dev,
>+ int32_t rx_queue_id[],
>+ const struct rte_event_eth_rx_adapter_queue_conf
>queue_conf[],
>+ uint16_t nb_rx_queues);
>+
> /**
> * Delete ethernet Rx queues from event device. This callback is invoked if
> * the caps returned from eventdev_eth_rx_adapter_caps_get(, eth_port_id)
>@@ -1578,6 +1610,8 @@ struct eventdev_ops {
> /**< Get ethernet Rx adapter capabilities */
> eventdev_eth_rx_adapter_queue_add_t eth_rx_adapter_queue_add;
> /**< Add Rx queues to ethernet Rx adapter */
>+ eventdev_eth_rx_adapter_queues_add_t eth_rx_adapter_queues_add;
>+ /**< Add Rx queues to ethernet Rx adapter */
> eventdev_eth_rx_adapter_queue_del_t eth_rx_adapter_queue_del;
> /**< Delete Rx queues from ethernet Rx adapter */
> eventdev_eth_rx_adapter_queue_conf_get_t
>eth_rx_adapter_queue_conf_get;
>diff --git a/lib/eventdev/rte_event_eth_rx_adapter.h
>b/lib/eventdev/rte_event_eth_rx_adapter.h
>index 9237e198a7..9a5c560b67 100644
>--- a/lib/eventdev/rte_event_eth_rx_adapter.h
>+++ b/lib/eventdev/rte_event_eth_rx_adapter.h
>@@ -553,6 +553,40 @@ int rte_event_eth_rx_adapter_queue_add(uint8_t id,
> int32_t rx_queue_id,
> const struct rte_event_eth_rx_adapter_queue_conf
>*conf);
>
>+/**
>+ * Add multiple receive queues to an event adapter.
>+ *
>+ * @param id
>+ * Adapter identifier.
>+ *
>+ * @param eth_dev_id
>+ * Port identifier of Ethernet device.
>+ *
>+ * @param rx_queue_id
>+ * Array of Ethernet device receive queue indices.
>+ * If nb_rx_queues is 0, then rx_queue_id is ignored.
>+ *
>+ * @param conf
>+ * Array of additional configuration structures of type
>+ * *rte_event_eth_rx_adapter_queue_conf*. conf[i] is used for
>rx_queue_id[i].
>+ * If nb_rx_queues is 0, then conf[0] is used for all Rx queues.
>+ *
>+ * @param nb_rx_queues
>+ * Number of receive queues to add.
>+ * If nb_rx_queues is 0, then all Rx queues configured for
>+ * the device are added with the same configuration in conf[0].
>+ * @see RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ
>+ *
>+ * @return
>+ * - 0: Success, Receive queues added correctly.
>+ * - <0: Error code on failure.
>+ */
>+__rte_experimental
>+int rte_event_eth_rx_adapter_queues_add(
>+ uint8_t id, uint16_t eth_dev_id, int32_t rx_queue_id[],
>+ const struct rte_event_eth_rx_adapter_queue_conf
>conf[],
>+ uint16_t nb_rx_queues);
>+
> /**
> * Delete receive queue from an event adapter.
> *
>--
>2.25.1
Please Ignore this patch. . It has been resent after adding all maintainers.
https://lore.kernel.org/dpdk-dev/20241219073405.1724200-1-sthotton@marvell.com/
next prev parent reply other threads:[~2024-12-19 7:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 7:31 Shijith Thotton
2024-12-19 7:40 ` Shijith Thotton [this message]
2024-12-19 7:34 Shijith Thotton
2024-12-22 16:28 ` Naga Harish K, S V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PH0PR18MB44257D45A1336A89C554C96CD9062@PH0PR18MB4425.namprd18.prod.outlook.com \
--to=sthotton@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=pbhagavatula@marvell.com \
--cc=s.v.naga.harish.k@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).