* [RFC] net/vhost: support asynchronous data path
@ 2022-12-16 2:00 Yuan Wang
2023-01-02 10:58 ` Maxime Coquelin
0 siblings, 1 reply; 5+ messages in thread
From: Yuan Wang @ 2022-12-16 2:00 UTC (permalink / raw)
To: dev; +Cc: jiayu.hu
Vhost asynchronous data-path offloads packet copy from the CPU
to the DMA engine. As a result, large packet copy can be accelerated
by the DMA engine, and vhost can free CPU cycles for higher level
functions.
In this patch, we enable asynchronous data-path for vhostpmd.
Asynchronous data path is enabled per tx/rx queue, and users need
to specify the DMA device used by the tx/rx queue. Each tx/rx queue
only supports to use one DMA device, but one DMA device can be shared
among multiple tx/rx queues of different vhost PMD ports.
Two PMD parameters are added:
- dmas: specify the used DMA device for a tx/rx queue.
(Default: no queues enable asynchronous data path)
- dma-ring-size: DMA ring size.
(Default: 4096).
Here is an example:
--vdev 'eth_vhost0,iface=./s0,dmas=[txq0@0000:00.01.0;rxq0@0000:00.01.1],dma-ring-size=4096'
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
---
drivers/net/vhost/meson.build | 1 +
drivers/net/vhost/rte_eth_vhost.c | 512 ++++++++++++++++++++++++++++--
drivers/net/vhost/rte_eth_vhost.h | 15 +
drivers/net/vhost/version.map | 7 +
drivers/net/vhost/vhost_testpmd.c | 67 ++++
5 files changed, 569 insertions(+), 33 deletions(-)
create mode 100644 drivers/net/vhost/vhost_testpmd.c
diff --git a/drivers/net/vhost/meson.build b/drivers/net/vhost/meson.build
index f481a3a4b8..22a0ab3a58 100644
--- a/drivers/net/vhost/meson.build
+++ b/drivers/net/vhost/meson.build
@@ -9,4 +9,5 @@ endif
deps += 'vhost'
sources = files('rte_eth_vhost.c')
+testpmd_sources = files('vhost_testpmd.c')
headers = files('rte_eth_vhost.h')
diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
index b152279fac..80cd9c8d92 100644
--- a/drivers/net/vhost/rte_eth_vhost.c
+++ b/drivers/net/vhost/rte_eth_vhost.c
@@ -7,6 +7,7 @@
#include <pthread.h>
#include <stdbool.h>
#include <sys/epoll.h>
+#include <ctype.h>
#include <rte_mbuf.h>
#include <ethdev_driver.h>
@@ -18,6 +19,8 @@
#include <rte_kvargs.h>
#include <rte_vhost.h>
#include <rte_spinlock.h>
+#include <rte_vhost_async.h>
+#include <rte_dmadev.h>
#include "rte_eth_vhost.h"
@@ -37,8 +40,15 @@ enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
#define ETH_VHOST_LINEAR_BUF "linear-buffer"
#define ETH_VHOST_EXT_BUF "ext-buffer"
#define ETH_VHOST_LEGACY_OL_FLAGS "legacy-ol-flags"
+#define ETH_VHOST_DMA_ARG "dmas"
+#define ETH_VHOST_DMA_RING_SIZE "dma-ring-size"
#define VHOST_MAX_PKT_BURST 32
+#define INVALID_DMA_ID -1
+#define DEFAULT_DMA_RING_SIZE 4096
+/* Minimum package size is 64, dma ring size should be greater than 32 */
+#define MINIMUM_DMA_RING_SIZE 64
+
static const char *valid_arguments[] = {
ETH_VHOST_IFACE_ARG,
ETH_VHOST_QUEUES_ARG,
@@ -49,6 +59,8 @@ static const char *valid_arguments[] = {
ETH_VHOST_LINEAR_BUF,
ETH_VHOST_EXT_BUF,
ETH_VHOST_LEGACY_OL_FLAGS,
+ ETH_VHOST_DMA_ARG,
+ ETH_VHOST_DMA_RING_SIZE,
NULL
};
@@ -80,8 +92,39 @@ struct vhost_queue {
struct vhost_stats stats;
int intr_enable;
rte_spinlock_t intr_lock;
+
+ /* Flag of enabling async data path */
+ bool async_register;
+ /* DMA device ID */
+ int16_t dma_id;
+ /**
+ * For a Rx queue, "txq" points to its peer Tx queue.
+ * For a Tx queue, "txq" is never used.
+ */
+ struct vhost_queue *txq;
+ /* Array to keep DMA completed packets */
+ struct rte_mbuf *cmpl_pkts[VHOST_MAX_PKT_BURST];
};
+struct dma_input_info {
+ int16_t dmas[RTE_MAX_QUEUES_PER_PORT * 2];
+ uint16_t dma_ring_size;
+};
+
+static int16_t configured_dmas[RTE_DMADEV_DEFAULT_MAX];
+static int dma_count;
+
+/**
+ * By default, its Rx path to call rte_vhost_poll_enqueue_completed() for enqueue operations.
+ * However, Rx function is never been called in testpmd "txonly" mode, thus causing virtio
+ * cannot receive DMA completed packets. To make txonly mode work correctly, we provide a
+ * command in testpmd to call rte_vhost_poll_enqueue_completed() in Tx path.
+ *
+ * When set async_tx_poll_completed to true, Tx path calls rte_vhost_poll_enqueue_completed();
+ * otherwise, Rx path calls it.
+ */
+bool async_tx_poll_completed;
+
struct pmd_internal {
rte_atomic32_t dev_attached;
char *iface_name;
@@ -94,6 +137,10 @@ struct pmd_internal {
bool vlan_strip;
bool rx_sw_csum;
bool tx_sw_csum;
+ struct {
+ int16_t dma_id;
+ bool async_register;
+ } queue_dmas[RTE_MAX_QUEUES_PER_PORT * 2];
};
struct internal_list {
@@ -124,6 +171,17 @@ struct rte_vhost_vring_state {
static struct rte_vhost_vring_state *vring_states[RTE_MAX_ETHPORTS];
+static bool
+dma_is_configured(int16_t dma_id)
+{
+ int i;
+
+ for (i = 0; i < dma_count; i++)
+ if (configured_dmas[i] == dma_id)
+ return true;
+ return false;
+}
+
static int
vhost_dev_xstats_reset(struct rte_eth_dev *dev)
{
@@ -396,15 +454,27 @@ vhost_dev_rx_sw_csum(struct rte_mbuf *mbuf)
mbuf->ol_flags |= RTE_MBUF_F_RX_L4_CKSUM_GOOD;
}
+static inline void
+vhost_tx_free_completed(int vid, uint16_t virtqueue_id, int16_t dma_id,
+ struct rte_mbuf **pkts, uint16_t count)
+{
+ uint16_t i, ret;
+
+ ret = rte_vhost_poll_enqueue_completed(vid, virtqueue_id, pkts, count, dma_id, 0);
+ for (i = 0; likely(i < ret); i++)
+ rte_pktmbuf_free(pkts[i]);
+}
+
static uint16_t
eth_vhost_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
{
struct vhost_queue *r = q;
uint16_t i, nb_rx = 0;
uint16_t nb_receive = nb_bufs;
+ uint16_t nb_pkts, num;
if (unlikely(rte_atomic32_read(&r->allow_queuing) == 0))
- return 0;
+ goto tx_poll;
rte_atomic32_set(&r->while_queuing, 1);
@@ -412,19 +482,32 @@ eth_vhost_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
goto out;
/* Dequeue packets from guest TX queue */
- while (nb_receive) {
- uint16_t nb_pkts;
- uint16_t num = (uint16_t)RTE_MIN(nb_receive,
- VHOST_MAX_PKT_BURST);
-
- nb_pkts = rte_vhost_dequeue_burst(r->vid, r->virtqueue_id,
- r->mb_pool, &bufs[nb_rx],
- num);
-
- nb_rx += nb_pkts;
- nb_receive -= nb_pkts;
- if (nb_pkts < num)
- break;
+ if (!r->async_register) {
+ while (nb_receive) {
+ num = (uint16_t)RTE_MIN(nb_receive, VHOST_MAX_PKT_BURST);
+ nb_pkts = rte_vhost_dequeue_burst(r->vid, r->virtqueue_id,
+ r->mb_pool, &bufs[nb_rx],
+ num);
+
+ nb_rx += nb_pkts;
+ nb_receive -= nb_pkts;
+ if (nb_pkts < num)
+ break;
+ }
+ } else {
+ int nr_inflight;
+
+ while (nb_receive) {
+ num = (uint16_t)RTE_MIN(nb_receive, VHOST_MAX_PKT_BURST);
+ nb_pkts = rte_vhost_async_try_dequeue_burst(r->vid, r->virtqueue_id,
+ r->mb_pool, &bufs[nb_rx], num, &nr_inflight,
+ r->dma_id, 0);
+
+ nb_rx += nb_pkts;
+ nb_receive -= nb_pkts;
+ if (nb_pkts < num)
+ break;
+ }
}
r->stats.pkts += nb_rx;
@@ -445,6 +528,17 @@ eth_vhost_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
out:
rte_atomic32_set(&r->while_queuing, 0);
+tx_poll:
+ /**
+ * Poll and free completed packets for the virtqueue of Tx queue.
+ * Note that we access Tx queue's virtqueue, which is protected
+ * by vring lock.
+ */
+ if (r->txq->async_register && !async_tx_poll_completed &&
+ rte_atomic32_read(&r->txq->allow_queuing) == 1)
+ vhost_tx_free_completed(r->vid, r->txq->virtqueue_id, r->txq->dma_id,
+ r->cmpl_pkts, VHOST_MAX_PKT_BURST);
+
return nb_rx;
}
@@ -456,6 +550,7 @@ eth_vhost_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
uint16_t nb_send = 0;
uint64_t nb_bytes = 0;
uint64_t nb_missed = 0;
+ uint16_t nb_pkts, num;
if (unlikely(rte_atomic32_read(&r->allow_queuing) == 0))
return 0;
@@ -486,31 +581,49 @@ eth_vhost_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
}
/* Enqueue packets to guest RX queue */
- while (nb_send) {
- uint16_t nb_pkts;
- uint16_t num = (uint16_t)RTE_MIN(nb_send,
- VHOST_MAX_PKT_BURST);
+ if (!r->async_register) {
+ while (nb_send) {
+ num = (uint16_t)RTE_MIN(nb_send, VHOST_MAX_PKT_BURST);
+ nb_pkts = rte_vhost_enqueue_burst(r->vid, r->virtqueue_id,
+ &bufs[nb_tx], num);
+
+ nb_tx += nb_pkts;
+ nb_send -= nb_pkts;
+ if (nb_pkts < num)
+ break;
+ }
- nb_pkts = rte_vhost_enqueue_burst(r->vid, r->virtqueue_id,
- &bufs[nb_tx], num);
+ for (i = 0; likely(i < nb_tx); i++) {
+ nb_bytes += bufs[i]->pkt_len;
+ rte_pktmbuf_free(bufs[i]);
+ }
- nb_tx += nb_pkts;
- nb_send -= nb_pkts;
- if (nb_pkts < num)
- break;
- }
+ } else {
+ while (nb_send) {
+ num = (uint16_t)RTE_MIN(nb_send, VHOST_MAX_PKT_BURST);
+ nb_pkts = rte_vhost_submit_enqueue_burst(r->vid, r->virtqueue_id,
+ &bufs[nb_tx], num, r->dma_id, 0);
+
+ nb_tx += nb_pkts;
+ nb_send -= nb_pkts;
+ if (nb_pkts < num)
+ break;
+ }
- for (i = 0; likely(i < nb_tx); i++)
- nb_bytes += bufs[i]->pkt_len;
+ for (i = 0; likely(i < nb_tx); i++)
+ nb_bytes += bufs[i]->pkt_len;
- nb_missed = nb_bufs - nb_tx;
+ if (unlikely(async_tx_poll_completed)) {
+ vhost_tx_free_completed(r->vid, r->virtqueue_id, r->dma_id, r->cmpl_pkts,
+ VHOST_MAX_PKT_BURST);
+ }
+ }
+ nb_missed = nb_bufs - nb_tx;
r->stats.pkts += nb_tx;
r->stats.bytes += nb_bytes;
r->stats.missed_pkts += nb_missed;
- for (i = 0; likely(i < nb_tx); i++)
- rte_pktmbuf_free(bufs[i]);
out:
rte_atomic32_set(&r->while_queuing, 0);
@@ -798,6 +911,8 @@ queue_setup(struct rte_eth_dev *eth_dev, struct pmd_internal *internal)
vq->vid = internal->vid;
vq->internal = internal;
vq->port = eth_dev->data->port_id;
+ if (i < eth_dev->data->nb_tx_queues)
+ vq->txq = eth_dev->data->tx_queues[i];
}
for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
vq = eth_dev->data->tx_queues[i];
@@ -878,6 +993,30 @@ new_device(int vid)
return 0;
}
+static inline void
+async_clear_virtqueue(int vid, uint16_t virtqueue_id, int16_t dma_id)
+{
+ struct rte_mbuf *pkts[VHOST_MAX_PKT_BURST];
+ uint16_t i, ret, nr_done = 0;
+
+ if (vid == -1)
+ return;
+
+ while (rte_vhost_async_get_inflight(vid, virtqueue_id) > 0) {
+ ret = rte_vhost_clear_queue(vid, virtqueue_id, pkts, VHOST_MAX_PKT_BURST, dma_id,
+ 0);
+ for (i = 0; i < ret ; i++)
+ rte_pktmbuf_free(pkts[i]);
+
+ nr_done += ret;
+ }
+ VHOST_LOG(INFO, "Completed %u pkts for vid-%u vring-%u\n", nr_done, vid, virtqueue_id);
+
+ if (rte_vhost_async_channel_unregister(vid, virtqueue_id))
+ VHOST_LOG(ERR, "Failed to unregister async for vid-%u vring-%u\n", vid,
+ virtqueue_id);
+}
+
static void
destroy_device(int vid)
{
@@ -908,13 +1047,27 @@ destroy_device(int vid)
vq = eth_dev->data->rx_queues[i];
if (!vq)
continue;
+ if (vq->async_register) {
+ async_clear_virtqueue(vq->vid, vq->virtqueue_id,
+ vq->dma_id);
+ vq->async_register = false;
+ internal->queue_dmas[vq->virtqueue_id].async_register = false;
+ }
vq->vid = -1;
+
}
for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
vq = eth_dev->data->tx_queues[i];
if (!vq)
continue;
+ if (vq->async_register) {
+ async_clear_virtqueue(vq->vid, vq->virtqueue_id,
+ vq->dma_id);
+ vq->async_register = false;
+ internal->queue_dmas[vq->virtqueue_id].async_register = false;
+ }
vq->vid = -1;
+
}
}
@@ -983,6 +1136,9 @@ vring_state_changed(int vid, uint16_t vring, int enable)
struct rte_vhost_vring_state *state;
struct rte_eth_dev *eth_dev;
struct internal_list *list;
+ struct vhost_queue *queue;
+ struct pmd_internal *internal;
+ int qid;
char ifname[PATH_MAX];
rte_vhost_get_ifname(vid, ifname, sizeof(ifname));
@@ -1011,6 +1167,65 @@ vring_state_changed(int vid, uint16_t vring, int enable)
update_queuing_status(eth_dev, false);
+ qid = vring / VIRTIO_QNUM;
+ if (vring % VIRTIO_QNUM == VIRTIO_RXQ)
+ queue = eth_dev->data->tx_queues[qid];
+ else
+ queue = eth_dev->data->rx_queues[qid];
+
+ if (!queue)
+ goto skip;
+
+ internal = eth_dev->data->dev_private;
+
+ /* Register async data path for the queue assigned valid DMA device */
+ if (internal->queue_dmas[queue->virtqueue_id].dma_id == INVALID_DMA_ID)
+ goto skip;
+
+ if (enable && !queue->async_register) {
+ if (rte_vhost_async_channel_register_thread_unsafe(vid, vring)) {
+ VHOST_LOG(ERR, "Failed to register async for vid-%u vring-%u!\n", vid,
+ vring);
+ return -1;
+ }
+
+ queue->async_register = true;
+ internal->queue_dmas[vring].async_register = true;
+
+ VHOST_LOG(INFO, "Succeed to register async for vid-%u vring-%u\n", vid, vring);
+ }
+
+ if (!enable && queue->async_register) {
+ struct rte_mbuf *pkts[VHOST_MAX_PKT_BURST];
+ uint16_t ret, i, nr_done = 0;
+ uint16_t dma_id = queue->dma_id;
+
+ while (rte_vhost_async_get_inflight_thread_unsafe(vid, vring) > 0) {
+ ret = rte_vhost_clear_queue_thread_unsafe(vid, vring, pkts,
+ VHOST_MAX_PKT_BURST, dma_id, 0);
+
+ for (i = 0; i < ret ; i++)
+ rte_pktmbuf_free(pkts[i]);
+
+ nr_done += ret;
+ }
+
+ VHOST_LOG(INFO, "Completed %u in-flight pkts for vid-%u vring-%u\n", nr_done, vid,
+ vring);
+
+ if (rte_vhost_async_channel_unregister_thread_unsafe(vid, vring)) {
+ VHOST_LOG(ERR, "Failed to unregister async for vid-%u vring-%u\n", vid,
+ vring);
+ return -1;
+ }
+
+ queue->async_register = false;
+ internal->queue_dmas[vring].async_register = false;
+
+ VHOST_LOG(INFO, "Succeed to unregister async for vid-%u vring-%u\n", vid, vring);
+ }
+
+skip:
VHOST_LOG(INFO, "vring%u is %s\n",
vring, enable ? "enabled" : "disabled");
@@ -1159,6 +1374,12 @@ rte_eth_vhost_get_vid_from_port_id(uint16_t port_id)
return vid;
}
+void
+rte_eth_vhost_async_tx_poll_completed(bool enable)
+{
+ async_tx_poll_completed = enable;
+}
+
static int
eth_dev_configure(struct rte_eth_dev *dev)
{
@@ -1220,6 +1441,7 @@ eth_dev_close(struct rte_eth_dev *dev)
{
struct pmd_internal *internal;
struct internal_list *list;
+ struct vhost_queue *queue;
unsigned int i, ret;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
@@ -1233,6 +1455,25 @@ eth_dev_close(struct rte_eth_dev *dev)
list = find_internal_resource(internal->iface_name);
if (list) {
+ /* Make sure all in-flight packets are completed before destroy vhost */
+ if (dev->data->rx_queues) {
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ queue = dev->data->rx_queues[i];
+ if (queue->async_register)
+ async_clear_virtqueue(queue->vid, queue->virtqueue_id,
+ queue->dma_id);
+ }
+ }
+
+ if (dev->data->tx_queues) {
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ queue = dev->data->tx_queues[i];
+ if (queue->async_register)
+ async_clear_virtqueue(queue->vid, queue->virtqueue_id,
+ queue->dma_id);
+ }
+ }
+
rte_vhost_driver_unregister(internal->iface_name);
pthread_mutex_lock(&internal_list_lock);
TAILQ_REMOVE(&internal_list, list, next);
@@ -1267,6 +1508,7 @@ eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
struct rte_mempool *mb_pool)
{
struct vhost_queue *vq;
+ struct pmd_internal *internal = dev->data->dev_private;
vq = rte_zmalloc_socket(NULL, sizeof(struct vhost_queue),
RTE_CACHE_LINE_SIZE, socket_id);
@@ -1277,6 +1519,8 @@ eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
vq->mb_pool = mb_pool;
vq->virtqueue_id = rx_queue_id * VIRTIO_QNUM + VIRTIO_TXQ;
+ vq->async_register = internal->queue_dmas[vq->virtqueue_id].async_register;
+ vq->dma_id = internal->queue_dmas[vq->virtqueue_id].dma_id;
rte_spinlock_init(&vq->intr_lock);
dev->data->rx_queues[rx_queue_id] = vq;
@@ -1290,6 +1534,7 @@ eth_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
const struct rte_eth_txconf *tx_conf __rte_unused)
{
struct vhost_queue *vq;
+ struct pmd_internal *internal = dev->data->dev_private;
vq = rte_zmalloc_socket(NULL, sizeof(struct vhost_queue),
RTE_CACHE_LINE_SIZE, socket_id);
@@ -1299,6 +1544,8 @@ eth_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
}
vq->virtqueue_id = tx_queue_id * VIRTIO_QNUM + VIRTIO_RXQ;
+ vq->async_register = internal->queue_dmas[vq->virtqueue_id].async_register;
+ vq->dma_id = internal->queue_dmas[vq->virtqueue_id].dma_id;
rte_spinlock_init(&vq->intr_lock);
dev->data->tx_queues[tx_queue_id] = vq;
@@ -1509,13 +1756,14 @@ static const struct eth_dev_ops ops = {
static int
eth_dev_vhost_create(struct rte_vdev_device *dev, char *iface_name,
int16_t queues, const unsigned int numa_node, uint64_t flags,
- uint64_t disable_flags)
+ uint64_t disable_flags, struct dma_input_info *dma_input)
{
const char *name = rte_vdev_device_name(dev);
struct rte_eth_dev_data *data;
struct pmd_internal *internal = NULL;
struct rte_eth_dev *eth_dev = NULL;
struct rte_ether_addr *eth_addr = NULL;
+ int i;
VHOST_LOG(INFO, "Creating VHOST-USER backend on numa socket %u\n",
numa_node);
@@ -1564,6 +1812,12 @@ eth_dev_vhost_create(struct rte_vdev_device *dev, char *iface_name,
eth_dev->rx_pkt_burst = eth_vhost_rx;
eth_dev->tx_pkt_burst = eth_vhost_tx;
+ for (i = 0; i < RTE_MAX_QUEUES_PER_PORT * 2; i++) {
+ /* Invalid DMA ID indicates the queue does not want to enable async data path */
+ internal->queue_dmas[i].dma_id = dma_input->dmas[i];
+ internal->queue_dmas[i].async_register = false;
+ }
+
rte_eth_dev_probing_finish(eth_dev);
return 0;
@@ -1603,6 +1857,155 @@ open_int(const char *key __rte_unused, const char *value, void *extra_args)
return 0;
}
+static int
+init_dma(int16_t dma_id, uint16_t ring_size)
+{
+ struct rte_dma_info info;
+ struct rte_dma_conf dev_config = { .nb_vchans = 1 };
+ struct rte_dma_vchan_conf qconf = {
+ .direction = RTE_DMA_DIR_MEM_TO_MEM,
+ };
+ int ret = 0;
+
+ if (dma_is_configured(dma_id))
+ goto out;
+
+ if (rte_dma_info_get(dma_id, &info) != 0) {
+ VHOST_LOG(ERR, "dma %u get info failed\n", dma_id);
+ ret = -1;
+ goto out;
+ }
+
+ if (info.max_vchans < 1) {
+ VHOST_LOG(ERR, "No channels available on dma %d\n", dma_id);
+ ret = -1;
+ goto out;
+ }
+
+ if (rte_dma_configure(dma_id, &dev_config) != 0) {
+ VHOST_LOG(ERR, "dma %u configure failed\n", dma_id);
+ ret = -1;
+ goto out;
+ }
+
+ rte_dma_info_get(dma_id, &info);
+ if (info.nb_vchans != 1) {
+ VHOST_LOG(ERR, "dma %u has no queues\n", dma_id);
+ ret = -1;
+ goto out;
+ }
+
+ ring_size = RTE_MAX(ring_size, MINIMUM_DMA_RING_SIZE);
+ ring_size = RTE_MAX(ring_size, info.min_desc);
+ qconf.nb_desc = RTE_MIN(ring_size, info.max_desc);
+ if (rte_dma_vchan_setup(dma_id, 0, &qconf) != 0) {
+ VHOST_LOG(ERR, "dma %u queue setup failed\n", dma_id);
+ ret = -1;
+ goto out;
+ }
+
+ if (rte_dma_start(dma_id) != 0) {
+ VHOST_LOG(ERR, "dma %u start failed\n", dma_id);
+ ret = -1;
+ goto out;
+ }
+
+ configured_dmas[dma_count++] = dma_id;
+
+out:
+ return ret;
+}
+
+static int
+open_dma(const char *key __rte_unused, const char *value, void *extra_args)
+{
+ struct dma_input_info *dma_input = extra_args;
+ char *input = strndup(value, strlen(value) + 1);
+ char *addrs = input;
+ char *ptrs[2];
+ char *start, *end, *substr;
+ uint16_t qid, virtqueue_id;
+ int16_t dma_id;
+ int i, ret = 0;
+
+ while (isblank(*addrs))
+ addrs++;
+ if (*addrs == '\0') {
+ VHOST_LOG(ERR, "No input DMA addresses\n");
+ ret = -1;
+ goto out;
+ }
+
+ /* process DMA devices within bracket. */
+ addrs++;
+ substr = strtok(addrs, ";]");
+ if (!substr) {
+ VHOST_LOG(ERR, "No input DMA addresse\n");
+ ret = -1;
+ goto out;
+ }
+
+ do {
+ rte_strsplit(substr, strlen(substr), ptrs, 2, '@');
+
+ char *txq, *rxq;
+ bool is_txq;
+
+ txq = strstr(ptrs[0], "txq");
+ rxq = strstr(ptrs[0], "rxq");
+ if (txq == NULL && rxq == NULL) {
+ VHOST_LOG(ERR, "Illegal queue\n");
+ ret = -1;
+ goto out;
+ } else if (txq) {
+ is_txq = true;
+ start = txq;
+ } else {
+ is_txq = false;
+ start = rxq;
+ }
+
+ start += 3;
+ qid = strtol(start, &end, 0);
+ if (end == start) {
+ VHOST_LOG(ERR, "No input queue ID\n");
+ ret = -1;
+ goto out;
+ }
+
+ virtqueue_id = is_txq ? qid * 2 + VIRTIO_RXQ : qid * 2 + VIRTIO_TXQ;
+
+ dma_id = rte_dma_get_dev_id_by_name(ptrs[1]);
+ if (dma_id < 0) {
+ VHOST_LOG(ERR, "Fail to find DMA device %s.\n", ptrs[1]);
+ ret = -1;
+ goto out;
+ }
+
+ ret = init_dma(dma_id, dma_input->dma_ring_size);
+ if (ret != 0) {
+ VHOST_LOG(ERR, "Fail to initialize DMA %u\n", dma_id);
+ ret = -1;
+ break;
+ }
+
+ dma_input->dmas[virtqueue_id] = dma_id;
+
+ substr = strtok(NULL, ";]");
+ } while (substr);
+
+ for (i = 0; i < dma_count; i++) {
+ if (rte_vhost_async_dma_configure(configured_dmas[i], 0) < 0) {
+ VHOST_LOG(ERR, "Fail to configure DMA %u to vhost\n", configured_dmas[i]);
+ ret = -1;
+ }
+ }
+
+out:
+ free(input);
+ return ret;
+}
+
static int
rte_pmd_vhost_probe(struct rte_vdev_device *dev)
{
@@ -1621,6 +2024,10 @@ rte_pmd_vhost_probe(struct rte_vdev_device *dev)
int legacy_ol_flags = 0;
struct rte_eth_dev *eth_dev;
const char *name = rte_vdev_device_name(dev);
+ struct dma_input_info dma_input;
+
+ memset(dma_input.dmas, INVALID_DMA_ID, sizeof(dma_input.dmas));
+ dma_input.dma_ring_size = DEFAULT_DMA_RING_SIZE;
VHOST_LOG(INFO, "Initializing pmd_vhost for %s\n", name);
@@ -1736,6 +2143,43 @@ rte_pmd_vhost_probe(struct rte_vdev_device *dev)
goto out_free;
}
+ if (rte_kvargs_count(kvlist, ETH_VHOST_DMA_RING_SIZE) == 1) {
+ if (rte_kvargs_count(kvlist, ETH_VHOST_DMA_ARG) == 1) {
+ ret = rte_kvargs_process(kvlist, ETH_VHOST_DMA_RING_SIZE,
+ &open_int, &dma_input.dma_ring_size);
+ if (ret < 0)
+ goto out_free;
+
+ if (!rte_is_power_of_2(dma_input.dma_ring_size)) {
+ dma_input.dma_ring_size = rte_align32pow2(dma_input.dma_ring_size);
+ VHOST_LOG(INFO, "Convert dma_ring_size to the power of two %u\n",
+ dma_input.dma_ring_size);
+ }
+ } else {
+ VHOST_LOG(WARNING, "%s is not specified, skip to parse %s\n",
+ ETH_VHOST_DMA_ARG, ETH_VHOST_DMA_RING_SIZE);
+ }
+ }
+
+ if (rte_kvargs_count(kvlist, ETH_VHOST_DMA_ARG) == 1) {
+ if (rte_kvargs_count(kvlist, ETH_VHOST_DMA_RING_SIZE) == 0)
+ VHOST_LOG(INFO, "Use default dma ring size %d\n", DEFAULT_DMA_RING_SIZE);
+
+ ret = rte_kvargs_process(kvlist, ETH_VHOST_DMA_ARG,
+ &open_dma, &dma_input);
+ if (ret < 0) {
+ VHOST_LOG(ERR, "Failed to parse %s\n", ETH_VHOST_DMA_ARG);
+ goto out_free;
+ }
+
+ flags |= RTE_VHOST_USER_ASYNC_COPY;
+ /**
+ * Don't support live migration when enable
+ * DMA acceleration.
+ */
+ disable_flags |= (1ULL << VHOST_F_LOG_ALL);
+ }
+
if (legacy_ol_flags == 0)
flags |= RTE_VHOST_USER_NET_COMPLIANT_OL_FLAGS;
@@ -1743,7 +2187,7 @@ rte_pmd_vhost_probe(struct rte_vdev_device *dev)
dev->device.numa_node = rte_socket_id();
ret = eth_dev_vhost_create(dev, iface_name, queues,
- dev->device.numa_node, flags, disable_flags);
+ dev->device.numa_node, flags, disable_flags, &dma_input);
if (ret == -1)
VHOST_LOG(ERR, "Failed to create %s\n", name);
@@ -1787,4 +2231,6 @@ RTE_PMD_REGISTER_PARAM_STRING(net_vhost,
"postcopy-support=<0|1> "
"tso=<0|1> "
"linear-buffer=<0|1> "
- "ext-buffer=<0|1>");
+ "ext-buffer=<0|1> "
+ "dma-ring-size=<int> "
+ "dmas=[txq0@dma_addr;rxq0@dma_addr]");
diff --git a/drivers/net/vhost/rte_eth_vhost.h b/drivers/net/vhost/rte_eth_vhost.h
index 0e68b9f668..146c98803d 100644
--- a/drivers/net/vhost/rte_eth_vhost.h
+++ b/drivers/net/vhost/rte_eth_vhost.h
@@ -52,6 +52,21 @@ int rte_eth_vhost_get_queue_event(uint16_t port_id,
*/
int rte_eth_vhost_get_vid_from_port_id(uint16_t port_id);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * By default, rte_vhost_poll_enqueue_completed() is called in Rx path.
+ * This function enables Tx path, rather than Rx path, to poll completed
+ * packets for vhost async enqueue operations. Note that virtio may never
+ * receive DMA completed packets if there are no more Tx operations.
+ *
+ * @param enable
+ * True indicates Tx path to call rte_vhost_poll_enqueue_completed().
+ */
+__rte_experimental
+void rte_eth_vhost_async_tx_poll_completed(bool enable);
+
#ifdef __cplusplus
}
#endif
diff --git a/drivers/net/vhost/version.map b/drivers/net/vhost/version.map
index e42c89f1eb..0a40441227 100644
--- a/drivers/net/vhost/version.map
+++ b/drivers/net/vhost/version.map
@@ -6,3 +6,10 @@ DPDK_23 {
local: *;
};
+
+EXPERIMENTAL {
+ global:
+
+ # added in 22.11
+ rte_eth_vhost_async_tx_poll_completed;
+};
diff --git a/drivers/net/vhost/vhost_testpmd.c b/drivers/net/vhost/vhost_testpmd.c
new file mode 100644
index 0000000000..11990ea152
--- /dev/null
+++ b/drivers/net/vhost/vhost_testpmd.c
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation.
+ */
+#include <rte_eth_vhost.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_parse_string.h>
+
+#include "testpmd.h"
+
+struct cmd_tx_poll_result {
+ cmdline_fixed_string_t async_vhost;
+ cmdline_fixed_string_t tx;
+ cmdline_fixed_string_t poll;
+ cmdline_fixed_string_t completed;
+ cmdline_fixed_string_t what;
+};
+
+static cmdline_parse_token_string_t cmd_tx_async_vhost =
+ TOKEN_STRING_INITIALIZER(struct cmd_tx_poll_result, async_vhost, "async_vhost");
+static cmdline_parse_token_string_t cmd_tx_tx =
+ TOKEN_STRING_INITIALIZER(struct cmd_tx_poll_result, tx, "tx");
+static cmdline_parse_token_string_t cmd_tx_poll =
+ TOKEN_STRING_INITIALIZER(struct cmd_tx_poll_result, poll, "poll");
+static cmdline_parse_token_string_t cmd_tx_completed =
+ TOKEN_STRING_INITIALIZER(struct cmd_tx_poll_result, completed, "completed");
+static cmdline_parse_token_string_t cmd_tx_what =
+ TOKEN_STRING_INITIALIZER(struct cmd_tx_poll_result, what, "on#off");
+
+static void
+cmd_tx_poll_parsed(void *parsed_result, __rte_unused struct cmdline *cl, __rte_unused void *data)
+{
+ struct cmd_tx_poll_result *res = parsed_result;
+
+ if (!strcmp(res->what, "on"))
+ rte_eth_vhost_async_tx_poll_completed(true);
+ else if (!strcmp(res->what, "off"))
+ rte_eth_vhost_async_tx_poll_completed(false);
+ else
+ fprintf(stderr, "Unknown parameter\n");
+}
+
+static cmdline_parse_inst_t async_vhost_cmd_tx_poll = {
+ .f = cmd_tx_poll_parsed,
+ .data = NULL,
+ .help_str = "async-vhost tx poll completed on|off",
+ .tokens = {
+ (void *)&cmd_tx_async_vhost,
+ (void *)&cmd_tx_tx,
+ (void *)&cmd_tx_poll,
+ (void *)&cmd_tx_completed,
+ (void *)&cmd_tx_what,
+ NULL,
+ },
+};
+
+static struct testpmd_driver_commands async_vhost_cmds = {
+ .commands = {
+ {
+ &async_vhost_cmd_tx_poll,
+ "async_vhost tx poll completed (on|off)\n"
+ " Poll and free DMA completed packets in Tx path.\n",
+ },
+ { NULL, NULL },
+ },
+};
+
+TESTPMD_ADD_DRIVER_COMMANDS(async_vhost_cmds)
--
2.25.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [RFC] net/vhost: support asynchronous data path
2022-12-16 2:00 [RFC] net/vhost: support asynchronous data path Yuan Wang
@ 2023-01-02 10:58 ` Maxime Coquelin
2023-01-06 9:08 ` Wang, YuanX
0 siblings, 1 reply; 5+ messages in thread
From: Maxime Coquelin @ 2023-01-02 10:58 UTC (permalink / raw)
To: Yuan Wang, dev; +Cc: jiayu.hu
Hi Yuan,
On 12/16/22 03:00, Yuan Wang wrote:
> Vhost asynchronous data-path offloads packet copy from the CPU
> to the DMA engine. As a result, large packet copy can be accelerated
> by the DMA engine, and vhost can free CPU cycles for higher level
> functions.
>
> In this patch, we enable asynchronous data-path for vhostpmd.
> Asynchronous data path is enabled per tx/rx queue, and users need
> to specify the DMA device used by the tx/rx queue. Each tx/rx queue
> only supports to use one DMA device, but one DMA device can be shared
> among multiple tx/rx queues of different vhost PMD ports.
>
> Two PMD parameters are added:
> - dmas: specify the used DMA device for a tx/rx queue.
> (Default: no queues enable asynchronous data path)
> - dma-ring-size: DMA ring size.
> (Default: 4096).
>
> Here is an example:
> --vdev 'eth_vhost0,iface=./s0,dmas=[txq0@0000:00.01.0;rxq0@0000:00.01.1],dma-ring-size=4096'
>
> Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
> Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
> Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
> ---
> drivers/net/vhost/meson.build | 1 +
> drivers/net/vhost/rte_eth_vhost.c | 512 ++++++++++++++++++++++++++++--
> drivers/net/vhost/rte_eth_vhost.h | 15 +
> drivers/net/vhost/version.map | 7 +
> drivers/net/vhost/vhost_testpmd.c | 67 ++++
> 5 files changed, 569 insertions(+), 33 deletions(-)
> create mode 100644 drivers/net/vhost/vhost_testpmd.c
>
This RFC is identical to the v5 that you sent for last release, and so
the comments I made on it are still valid.
Is this intentionally re-sent?
Regards,
Maxime
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [RFC] net/vhost: support asynchronous data path
2023-01-02 10:58 ` Maxime Coquelin
@ 2023-01-06 9:08 ` Wang, YuanX
2023-01-06 9:33 ` Maxime Coquelin
0 siblings, 1 reply; 5+ messages in thread
From: Wang, YuanX @ 2023-01-06 9:08 UTC (permalink / raw)
To: Maxime Coquelin, dev; +Cc: Hu, Jiayu
Hi Maxime,
Sorry about not being clear about the intentions.
The patch is for a whitepaper, we use it for tests and we need to attach the patch link.
Maybe I should set the patch state to superseded?
Thanks,
Yuan
> -----Original Message-----
> From: Maxime Coquelin <maxime.coquelin@redhat.com>
> Sent: Monday, January 2, 2023 6:59 PM
> To: Wang, YuanX <yuanx.wang@intel.com>; dev@dpdk.org
> Cc: Hu, Jiayu <jiayu.hu@intel.com>
> Subject: Re: [RFC] net/vhost: support asynchronous data path
>
> Hi Yuan,
>
> On 12/16/22 03:00, Yuan Wang wrote:
> > Vhost asynchronous data-path offloads packet copy from the CPU to the
> > DMA engine. As a result, large packet copy can be accelerated by the
> > DMA engine, and vhost can free CPU cycles for higher level functions.
> >
> > In this patch, we enable asynchronous data-path for vhostpmd.
> > Asynchronous data path is enabled per tx/rx queue, and users need to
> > specify the DMA device used by the tx/rx queue. Each tx/rx queue only
> > supports to use one DMA device, but one DMA device can be shared
> among
> > multiple tx/rx queues of different vhost PMD ports.
> >
> > Two PMD parameters are added:
> > - dmas: specify the used DMA device for a tx/rx queue.
> > (Default: no queues enable asynchronous data path)
> > - dma-ring-size: DMA ring size.
> > (Default: 4096).
> >
> > Here is an example:
> > --vdev
> 'eth_vhost0,iface=./s0,dmas=[txq0@0000:00.01.0;rxq0@0000:00.01.1],dma-
> ring-size=4096'
> >
> > Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
> > Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
> > Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
> > ---
> > drivers/net/vhost/meson.build | 1 +
> > drivers/net/vhost/rte_eth_vhost.c | 512
> ++++++++++++++++++++++++++++--
> > drivers/net/vhost/rte_eth_vhost.h | 15 +
> > drivers/net/vhost/version.map | 7 +
> > drivers/net/vhost/vhost_testpmd.c | 67 ++++
> > 5 files changed, 569 insertions(+), 33 deletions(-)
> > create mode 100644 drivers/net/vhost/vhost_testpmd.c
> >
>
> This RFC is identical to the v5 that you sent for last release, and so the
> comments I made on it are still valid.
>
> Is this intentionally re-sent?
>
> Regards,
> Maxime
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [RFC] net/vhost: support asynchronous data path
2023-01-06 9:08 ` Wang, YuanX
@ 2023-01-06 9:33 ` Maxime Coquelin
2023-01-06 9:47 ` Wang, YuanX
0 siblings, 1 reply; 5+ messages in thread
From: Maxime Coquelin @ 2023-01-06 9:33 UTC (permalink / raw)
To: Wang, YuanX, dev; +Cc: Hu, Jiayu
Hi,
On 1/6/23 10:08, Wang, YuanX wrote:
> Hi Maxime,
>
> Sorry about not being clear about the intentions.
> The patch is for a whitepaper, we use it for tests and we need to attach the patch link.
Thanks for the clarification.
> Maybe I should set the patch state to superseded?
I think setting it to rejected would be the appropriate state, as there
are no patch that supersedes it.
Thanks,
Maxime
> Thanks,
> Yuan
>
>> -----Original Message-----
>> From: Maxime Coquelin <maxime.coquelin@redhat.com>
>> Sent: Monday, January 2, 2023 6:59 PM
>> To: Wang, YuanX <yuanx.wang@intel.com>; dev@dpdk.org
>> Cc: Hu, Jiayu <jiayu.hu@intel.com>
>> Subject: Re: [RFC] net/vhost: support asynchronous data path
>>
>> Hi Yuan,
>>
>> On 12/16/22 03:00, Yuan Wang wrote:
>>> Vhost asynchronous data-path offloads packet copy from the CPU to the
>>> DMA engine. As a result, large packet copy can be accelerated by the
>>> DMA engine, and vhost can free CPU cycles for higher level functions.
>>>
>>> In this patch, we enable asynchronous data-path for vhostpmd.
>>> Asynchronous data path is enabled per tx/rx queue, and users need to
>>> specify the DMA device used by the tx/rx queue. Each tx/rx queue only
>>> supports to use one DMA device, but one DMA device can be shared
>> among
>>> multiple tx/rx queues of different vhost PMD ports.
>>>
>>> Two PMD parameters are added:
>>> - dmas: specify the used DMA device for a tx/rx queue.
>>> (Default: no queues enable asynchronous data path)
>>> - dma-ring-size: DMA ring size.
>>> (Default: 4096).
>>>
>>> Here is an example:
>>> --vdev
>> 'eth_vhost0,iface=./s0,dmas=[txq0@0000:00.01.0;rxq0@0000:00.01.1],dma-
>> ring-size=4096'
>>>
>>> Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
>>> Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
>>> Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
>>> ---
>>> drivers/net/vhost/meson.build | 1 +
>>> drivers/net/vhost/rte_eth_vhost.c | 512
>> ++++++++++++++++++++++++++++--
>>> drivers/net/vhost/rte_eth_vhost.h | 15 +
>>> drivers/net/vhost/version.map | 7 +
>>> drivers/net/vhost/vhost_testpmd.c | 67 ++++
>>> 5 files changed, 569 insertions(+), 33 deletions(-)
>>> create mode 100644 drivers/net/vhost/vhost_testpmd.c
>>>
>>
>> This RFC is identical to the v5 that you sent for last release, and so the
>> comments I made on it are still valid.
>>
>> Is this intentionally re-sent?
>>
>> Regards,
>> Maxime
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [RFC] net/vhost: support asynchronous data path
2023-01-06 9:33 ` Maxime Coquelin
@ 2023-01-06 9:47 ` Wang, YuanX
0 siblings, 0 replies; 5+ messages in thread
From: Wang, YuanX @ 2023-01-06 9:47 UTC (permalink / raw)
To: Maxime Coquelin, dev; +Cc: Hu, Jiayu
Hi,
> -----Original Message-----
> From: Maxime Coquelin <maxime.coquelin@redhat.com>
> Sent: Friday, January 6, 2023 5:34 PM
> To: Wang, YuanX <yuanx.wang@intel.com>; dev@dpdk.org
> Cc: Hu, Jiayu <jiayu.hu@intel.com>
> Subject: Re: [RFC] net/vhost: support asynchronous data path
>
> Hi,
>
> On 1/6/23 10:08, Wang, YuanX wrote:
> > Hi Maxime,
> >
> > Sorry about not being clear about the intentions.
> > The patch is for a whitepaper, we use it for tests and we need to attach the
> patch link.
>
> Thanks for the clarification.
>
> > Maybe I should set the patch state to superseded?
>
> I think setting it to rejected would be the appropriate state, as there are no
> patch that supersedes it.
Ok, thanks for your advice.
Regards,
Yuan
>
> Thanks,
> Maxime
>
> > Thanks,
> > Yuan
> >
> >> -----Original Message-----
> >> From: Maxime Coquelin <maxime.coquelin@redhat.com>
> >> Sent: Monday, January 2, 2023 6:59 PM
> >> To: Wang, YuanX <yuanx.wang@intel.com>; dev@dpdk.org
> >> Cc: Hu, Jiayu <jiayu.hu@intel.com>
> >> Subject: Re: [RFC] net/vhost: support asynchronous data path
> >>
> >> Hi Yuan,
> >>
> >> On 12/16/22 03:00, Yuan Wang wrote:
> >>> Vhost asynchronous data-path offloads packet copy from the CPU to
> >>> the DMA engine. As a result, large packet copy can be accelerated by
> >>> the DMA engine, and vhost can free CPU cycles for higher level functions.
> >>>
> >>> In this patch, we enable asynchronous data-path for vhostpmd.
> >>> Asynchronous data path is enabled per tx/rx queue, and users need to
> >>> specify the DMA device used by the tx/rx queue. Each tx/rx queue
> >>> only supports to use one DMA device, but one DMA device can be
> >>> shared
> >> among
> >>> multiple tx/rx queues of different vhost PMD ports.
> >>>
> >>> Two PMD parameters are added:
> >>> - dmas: specify the used DMA device for a tx/rx queue.
> >>> (Default: no queues enable asynchronous data path)
> >>> - dma-ring-size: DMA ring size.
> >>> (Default: 4096).
> >>>
> >>> Here is an example:
> >>> --vdev
> >>
> 'eth_vhost0,iface=./s0,dmas=[txq0@0000:00.01.0;rxq0@0000:00.01.1],dma
> >> -
> >> ring-size=4096'
> >>>
> >>> Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
> >>> Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
> >>> Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
> >>> ---
> >>> drivers/net/vhost/meson.build | 1 +
> >>> drivers/net/vhost/rte_eth_vhost.c | 512
> >> ++++++++++++++++++++++++++++--
> >>> drivers/net/vhost/rte_eth_vhost.h | 15 +
> >>> drivers/net/vhost/version.map | 7 +
> >>> drivers/net/vhost/vhost_testpmd.c | 67 ++++
> >>> 5 files changed, 569 insertions(+), 33 deletions(-)
> >>> create mode 100644 drivers/net/vhost/vhost_testpmd.c
> >>>
> >>
> >> This RFC is identical to the v5 that you sent for last release, and
> >> so the comments I made on it are still valid.
> >>
> >> Is this intentionally re-sent?
> >>
> >> Regards,
> >> Maxime
> >
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-01-06 9:47 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-16 2:00 [RFC] net/vhost: support asynchronous data path Yuan Wang
2023-01-02 10:58 ` Maxime Coquelin
2023-01-06 9:08 ` Wang, YuanX
2023-01-06 9:33 ` Maxime Coquelin
2023-01-06 9:47 ` Wang, YuanX
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).