DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Su, Simei" <simei.su@intel.com>
To: David Marchand <david.marchand@redhat.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Cc: "stable@dpdk.org" <stable@dpdk.org>,
	"Zhang, Yuying" <yuying.zhang@intel.com>,
	"Xing, Beilei" <beilei.xing@intel.com>,
	"Zhang, Qi Z" <qi.z.zhang@intel.com>
Subject: RE: [PATCH v2] net/i40e: don't check link status on device start
Date: Mon, 6 Mar 2023 06:53:49 +0000	[thread overview]
Message-ID: <SA1PR11MB6613118AA5A35105E71D67CE9CB69@SA1PR11MB6613.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20221213091837.87953-1-david.marchand@redhat.com>



> -----Original Message-----
> From: David Marchand <david.marchand@redhat.com>
> Sent: Tuesday, December 13, 2022 5:19 PM
> To: dev@dpdk.org
> Cc: stable@dpdk.org; Zhang, Yuying <yuying.zhang@intel.com>; Xing, Beilei
> <beilei.xing@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>; Dapeng Yu
> <dapengx.yu@intel.com>; Wenxuan Wu <wenxuanx.wu@intel.com>; Wang,
> Jie1X <jie1x.wang@intel.com>
> Subject: [PATCH v2] net/i40e: don't check link status on device start
> 
> The mentioned changes broke existing applications when the link status of
> i40e ports is down at the time the port is started.
> Revert those changes, the original issue will need a different fix.
> 
> Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
> Fixes: 2184f7cdeeaa ("net/i40e: fix max frame size config at port level")
> Fixes: 719469f13b11 ("net/i40e: fix jumbo frame Rx with X722")
> Cc: stable@dpdk.org
> 
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> Changes since v1:
> - since the CI reports a failure on v1, simplified the fix by only
>   reverting commits,
> 
> ---
>  drivers/net/i40e/i40e_ethdev.c | 50 +++++-----------------------------
>  1 file changed, 7 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 7726a89d99..a982e42264 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -387,7 +387,6 @@ static int i40e_set_default_mac_addr(struct
> rte_eth_dev *dev,
>  				      struct rte_ether_addr *mac_addr);
> 
>  static int i40e_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu); -static
> void i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size);
> 
>  static int i40e_ethertype_filter_convert(
>  	const struct rte_eth_ethertype_filter *input, @@ -1711,6 +1710,11 @@
> eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
>  	 */
>  	i40e_add_tx_flow_control_drop_filter(pf);
> 
> +	/* Set the max frame size to 0x2600 by default,
> +	 * in case other drivers changed the default value.
> +	 */
> +	i40e_aq_set_mac_config(hw, I40E_FRAME_SIZE_MAX, TRUE, false, 0,
> NULL);
> +
>  	/* initialize RSS rule list */
>  	TAILQ_INIT(&pf->rss_config_list);
> 
> @@ -2328,7 +2332,6 @@ i40e_dev_start(struct rte_eth_dev *dev)
>  	uint32_t intr_vector = 0;
>  	struct i40e_vsi *vsi;
>  	uint16_t nb_rxq, nb_txq;
> -	uint16_t max_frame_size;
> 
>  	hw->adapter_stopped = 0;
> 
> @@ -2467,9 +2470,6 @@ i40e_dev_start(struct rte_eth_dev *dev)
>  			    "please call hierarchy_commit() "
>  			    "before starting the port");
> 
> -	max_frame_size = dev->data->mtu + I40E_ETH_OVERHEAD;
> -	i40e_set_mac_max_frame(dev, max_frame_size);
> -
>  	return I40E_SUCCESS;
> 
>  tx_err:
> @@ -2809,9 +2809,6 @@ i40e_dev_set_link_down(struct rte_eth_dev *dev)
>  	return i40e_phy_conf_link(hw, abilities, speed, false);  }
> 
> -#define CHECK_INTERVAL             100  /* 100ms */
> -#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
> -
>  static __rte_always_inline void
>  update_link_reg(struct i40e_hw *hw, struct rte_eth_link *link)  { @@
> -2878,6 +2875,8 @@ static __rte_always_inline void  update_link_aq(struct
> i40e_hw *hw, struct rte_eth_link *link,
>  	bool enable_lse, int wait_to_complete)  {
> +#define CHECK_INTERVAL             100  /* 100ms */
> +#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
>  	uint32_t rep_cnt = MAX_REPEAT_TIME;
>  	struct i40e_link_status link_status;
>  	int status;
> @@ -6738,7 +6737,6 @@ i40e_dev_handle_aq_msg(struct rte_eth_dev *dev)
>  			if (!ret)
>  				rte_eth_dev_callback_process(dev,
>  					RTE_ETH_EVENT_INTR_LSC, NULL);
> -
>  			break;
>  		default:
>  			PMD_DRV_LOG(DEBUG, "Request %u is not supported yet", @@
> -12123,40 +12121,6 @@ i40e_cloud_filter_qinq_create(struct i40e_pf *pf)
>  	return ret;
>  }
> 
> -static void
> -i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size) -{
> -	struct i40e_hw *hw =
> I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> -	uint32_t rep_cnt = MAX_REPEAT_TIME;
> -	struct rte_eth_link link;
> -	enum i40e_status_code status;
> -	bool can_be_set = true;
> -
> -	/*
> -	 * I40E_MEDIA_TYPE_BASET link up can be ignored
> -	 * I40E_MEDIA_TYPE_BASET link down that hw->phy.media_type
> -	 * is I40E_MEDIA_TYPE_UNKNOWN
> -	 */
> -	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
> -	    hw->phy.media_type != I40E_MEDIA_TYPE_UNKNOWN) {
> -		do {
> -			update_link_reg(hw, &link);
> -			if (link.link_status)
> -				break;
> -			rte_delay_ms(CHECK_INTERVAL);
> -		} while (--rep_cnt);
> -		can_be_set = !!link.link_status;
> -	}
> -
> -	if (can_be_set) {
> -		status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false, NULL);
> -		if (status != I40E_SUCCESS)
> -			PMD_DRV_LOG(ERR, "Failed to set max frame size at port
> level");
> -	} else {
> -		PMD_DRV_LOG(ERR, "Set max frame size at port level not applicable
> on link down");
> -	}
> -}
> -
>  RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
> RTE_LOG_REGISTER_SUFFIX(i40e_logtype_driver, driver, NOTICE);  #ifdef
> RTE_ETHDEV_DEBUG_RX
> --
> 2.38.1

Acked-by: Simei Su <simei.su@intel.com>

Thanks,
Simei 


  parent reply	other threads:[~2023-03-06  6:53 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-07  8:59 [PATCH] net/i40e: enable max frame size at port level dapengx.yu
     [not found] ` <BYAPR11MB2711AB91F380189FB6AFCC52FE359@BYAPR11MB2711.namprd11.prod.outlook.com>
     [not found]   ` <BYAPR11MB27110434B9262C0E2BED3AD3FE3A9@BYAPR11MB2711.namprd11.prod.outlook.com>
2022-02-21  9:28     ` Zhang, Peng1X
2022-02-21 10:42     ` Zhang, Peng1X
2022-02-21 11:22       ` Zhang, Qi Z
2022-02-22  9:52         ` Kevin Traynor
2022-12-12 13:53 ` David Marchand
2022-12-12 13:58   ` David Marchand
2022-12-12 14:37     ` [PATCH] net/i40e: drop link check when configuring frame size David Marchand
2022-12-13  9:18       ` [PATCH v2] net/i40e: don't check link status on device start David Marchand
2023-01-03 14:02         ` David Marchand
2023-01-09  9:21           ` David Marchand
2023-01-13 13:33             ` David Marchand
2023-01-13 13:39               ` Zhang, Helin
2023-01-13 13:46                 ` David Marchand
2023-01-13 13:50                   ` Zhang, Helin
2023-01-13 13:53                     ` David Marchand
2023-01-16 11:02                       ` Su, Simei
2023-02-07 11:31                         ` Thomas Monjalon
2023-02-07 14:05                           ` Su, Simei
2023-03-06  6:53         ` Su, Simei [this message]
2023-03-06 11:05           ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=SA1PR11MB6613118AA5A35105E71D67CE9CB69@SA1PR11MB6613.namprd11.prod.outlook.com \
    --to=simei.su@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=stable@dpdk.org \
    --cc=yuying.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).