From: Akhil Goyal <akhil.goyal@nxp.com>
To: Anoob Joseph <anoobj@marvell.com>,
Declan Doherty <declan.doherty@intel.com>,
Thomas Monjalon <thomas@monjalon.net>
Cc: Jerin Jacob <jerinj@marvell.com>,
Narayana Prasad <pathreya@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>,
Ankur Dwivedi <adwivedi@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
Tejasree Kondoj <ktejasree@marvell.com>,
Vamsi Attunuru <vattunuru@marvell.com>,
Lukasz Bartosik <lbartosik@marvell.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 00/15] add OCTEON TX2 inline IPsec support
Date: Tue, 4 Feb 2020 16:10:35 +0000 [thread overview]
Message-ID: <VE1PR04MB663940487EC74F9FFF5B61C7E6030@VE1PR04MB6639.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1580815045-32132-1-git-send-email-anoobj@marvell.com>
>
> This series adds inline IPsec support in OCTEON TX2 PMD.
>
> In the inbound path, rte_flow framework need to be used to configure
> the NPC block, which does the h/w lookup. The packets would get
> processed by the crypto block and would submit to the scheduling block,
> SSO. So inline IPsec mode can be enabled only when traffic is received
> via event device using Rx adapter.
>
> In the outbound path, the core would submit to the crypto block and the
> crypto block would submit the packet for Tx internally.
>
> v4:
> * Reverted meson.build file edit in patch 14/15
>
> v3:
> * Moved ethdev security ops to net/octeontx2
> * Segregated all security related code in common to
> common/octeontx2/otx2_sec* files
> * Segregated all security related control code in net to
> net/octeontx2/otx2_ethdev_sec* files
> * Claimed maintainership for all files added above
> * Added support for AES-CBC
>
> v2:
> * Minimized additions to common/octeontx2
> * Updated release notes
> * Renamed otx2_is_ethdev to otx2_ethdev_is_sec_capable
>
> Ankur Dwivedi (3):
> net/octeontx2: add eth security capabilities
> net/octeontx2: add datapath ops in eth security ctx
> net/octeontx2: add inline Tx path changes
>
> Anoob Joseph (4):
> common/octeontx2: add CPT LF mbox for inline inbound
> net/octeontx2: create eth security ctx
> crypto/octeontx2: enable CPT to share QP with ethdev
> net/octeontx2: add eth security session operations
>
> Archana Muniganti (3):
> net/octeontx2: add lookup mem changes to hold sa indices
> drivers/octeontx2: add sec in Rx fastpath framework
> drivers/octeontx2: add sec in Tx fastpath framework
>
> Tejasree Kondoj (3):
> crypto/octeontx2: configure for inline IPsec
> net/octeontx2: add security in eth dev configure
> net/octeontx2: add inline ipsec Rx path changes
>
> Vamsi Attunuru (2):
> common/octeontx2: add routine to check if sec capable otx2
> net/octeontx2: sync inline tag type
>
> MAINTAINERS | 6 +
> doc/guides/nics/octeontx2.rst | 20 +
> doc/guides/rel_notes/release_20_02.rst | 9 +
> drivers/common/octeontx2/Makefile | 1 +
> drivers/common/octeontx2/meson.build | 1 +
> drivers/common/octeontx2/otx2_common.h | 4 +
> drivers/common/octeontx2/otx2_mbox.h | 7 +
> drivers/common/octeontx2/otx2_sec_idev.c | 183 +++++
> drivers/common/octeontx2/otx2_sec_idev.h | 37 +
> .../octeontx2/rte_common_octeontx2_version.map | 6 +
> drivers/crypto/octeontx2/Makefile | 6 +-
> drivers/crypto/octeontx2/meson.build | 4 +
> .../crypto/octeontx2/otx2_cryptodev_hw_access.h | 22 +-
> drivers/crypto/octeontx2/otx2_cryptodev_mbox.c | 54 ++
> drivers/crypto/octeontx2/otx2_cryptodev_mbox.h | 7 +
> drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 56 ++
> drivers/crypto/octeontx2/otx2_cryptodev_qp.h | 35 +
> drivers/crypto/octeontx2/otx2_ipsec_fp.h | 350 +++++++++
> drivers/event/octeontx2/Makefile | 1 +
> drivers/event/octeontx2/meson.build | 2 +
> drivers/event/octeontx2/otx2_evdev.c | 170 +++--
> drivers/event/octeontx2/otx2_evdev.h | 4 +-
> drivers/event/octeontx2/otx2_worker.c | 6 +-
> drivers/event/octeontx2/otx2_worker.h | 6 +
> drivers/event/octeontx2/otx2_worker_dual.c | 6 +-
> drivers/net/octeontx2/Makefile | 4 +
> drivers/net/octeontx2/meson.build | 7 +-
> drivers/net/octeontx2/otx2_ethdev.c | 38 +-
> drivers/net/octeontx2/otx2_ethdev.h | 2 +
> drivers/net/octeontx2/otx2_ethdev_devargs.c | 19 +
> drivers/net/octeontx2/otx2_ethdev_sec.c | 844
> +++++++++++++++++++++
> drivers/net/octeontx2/otx2_ethdev_sec.h | 139 ++++
> drivers/net/octeontx2/otx2_ethdev_sec_tx.h | 181 +++++
> drivers/net/octeontx2/otx2_flow.c | 26 +
> drivers/net/octeontx2/otx2_lookup.c | 11 +-
> drivers/net/octeontx2/otx2_rx.c | 27 +-
> drivers/net/octeontx2/otx2_rx.h | 377 ++++++---
> drivers/net/octeontx2/otx2_tx.c | 29 +-
> drivers/net/octeontx2/otx2_tx.h | 271 +++++--
> 39 files changed, 2696 insertions(+), 282 deletions(-)
> create mode 100644 drivers/common/octeontx2/otx2_sec_idev.c
> create mode 100644 drivers/common/octeontx2/otx2_sec_idev.h
> create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_qp.h
> create mode 100644 drivers/crypto/octeontx2/otx2_ipsec_fp.h
> create mode 100644 drivers/net/octeontx2/otx2_ethdev_sec.c
> create mode 100644 drivers/net/octeontx2/otx2_ethdev_sec.h
> create mode 100644 drivers/net/octeontx2/otx2_ethdev_sec_tx.h
>
Applied to dpdk-next-crypto
Thanks.
prev parent reply other threads:[~2020-02-04 16:10 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-08 11:54 [dpdk-dev] [PATCH 00/15] add OCTEONTX2 " Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2019-12-09 7:38 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 02/15] common/octeontx2: add routine to check if rte_eth_dev belongs to otx2 Anoob Joseph
2019-12-09 7:42 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2019-12-09 7:46 ` Jerin Jacob
2019-12-09 7:52 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-09 7:53 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 04/15] crypto/octeontx2: create eth security ctx Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 05/15] crypto/octeontx2: add security in eth dev configure Anoob Joseph
2019-12-09 7:51 ` Jerin Jacob
2019-12-09 8:03 ` Anoob Joseph
2019-12-09 8:04 ` Jerin Jacob
2019-12-08 11:54 ` [dpdk-dev] [PATCH 06/15] crypto/octeontx2: add eth security capabilities Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 08/15] crypto/octeontx2: add eth security session operations Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 09/15] crypto/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 10/15] crypto/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2019-12-09 8:02 ` Jerin Jacob
2019-12-13 7:12 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 11/15] net/octeontx2: add inline ipsec rx path changes Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 12/15] drivers/octeontx2: add sec in compiler optimized RX fastpath framework Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 13/15] drivers/octeontx2: add sec in compiler optimized TX " Anoob Joseph
2019-12-08 11:54 ` [dpdk-dev] [PATCH 14/15] crypto/octeontx2: add inline tx path changes Anoob Joseph
2019-12-14 15:42 ` Gavin Hu (Arm Technology China)
2019-12-08 11:54 ` [dpdk-dev] [PATCH 15/15] crypto/octeontx2: sync inline tag type cfg with Rx adapter configuration Anoob Joseph
2019-12-09 8:06 ` [dpdk-dev] [PATCH 00/15] add OCTEONTX2 inline IPsec support Jerin Jacob
2019-12-10 22:54 ` Thomas Monjalon
2019-12-13 7:41 ` [dpdk-dev] [EXT] " Anoob Joseph
2019-12-13 10:18 ` Thomas Monjalon
2020-01-18 10:48 ` [dpdk-dev] [PATCH v2 " Anoob Joseph
2020-01-18 10:48 ` [dpdk-dev] [PATCH v2 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-01-18 14:34 ` Jerin Jacob
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-01-18 14:35 ` Jerin Jacob
2020-01-27 7:01 ` Akhil Goyal
2020-01-27 8:02 ` Anoob Joseph
2020-01-27 8:12 ` Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 04/15] crypto/octeontx2: create eth security ctx Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 05/15] crypto/octeontx2: add security in eth dev configure Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 06/15] crypto/octeontx2: add eth security capabilities Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 08/15] crypto/octeontx2: add eth security session operations Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 09/15] crypto/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 10/15] crypto/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 11/15] net/octeontx2: add inline ipsec rx path changes Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 12/15] drivers/octeontx2: add sec in compiler optimized RX fastpath framework Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 13/15] drivers/octeontx2: add sec in compiler optimized TX " Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 14/15] crypto/octeontx2: add inline tx path changes Anoob Joseph
2020-01-18 10:49 ` [dpdk-dev] [PATCH v2 15/15] crypto/octeontx2: sync inline tag type cfg with Rx adapter configuration Anoob Joseph
2020-01-18 14:38 ` [dpdk-dev] [PATCH v2 00/15] add OCTEONTX2 inline IPsec support Jerin Jacob
2020-01-19 10:43 ` Anoob Joseph
2020-01-19 10:53 ` Thomas Monjalon
2020-01-19 10:57 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-22 10:16 ` [dpdk-dev] " Akhil Goyal
2020-01-22 10:55 ` Anoob Joseph
2020-01-22 12:56 ` Akhil Goyal
2020-01-22 14:18 ` Jerin Jacob
2020-01-27 2:55 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-27 10:40 ` [dpdk-dev] " Akhil Goyal
2020-01-27 11:25 ` Jerin Jacob
2020-01-27 11:47 ` Akhil Goyal
2020-01-27 14:54 ` Anoob Joseph
2020-01-28 8:29 ` Jerin Jacob
2020-01-28 8:38 ` Akhil Goyal
2020-01-28 8:56 ` Jerin Jacob
2020-01-28 17:28 ` Ferruh Yigit
2020-01-29 4:01 ` [dpdk-dev] [EXT] " Anoob Joseph
2020-01-28 17:27 ` [dpdk-dev] " Ferruh Yigit
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 00/15] add OCTEON TX2 " Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 04/15] net/octeontx2: create eth security ctx Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 05/15] net/octeontx2: add security in eth dev configure Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 06/15] net/octeontx2: add eth security capabilities Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 08/15] net/octeontx2: add eth security session operations Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 09/15] net/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 10/15] net/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 11/15] net/octeontx2: add inline ipsec Rx path changes Anoob Joseph
2020-01-31 13:39 ` Akhil Goyal
2020-01-31 15:05 ` Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 12/15] drivers/octeontx2: add sec in Rx fastpath framework Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 13/15] drivers/octeontx2: add sec in Tx " Anoob Joseph
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 14/15] net/octeontx2: add inline Tx path changes Anoob Joseph
2020-01-31 13:36 ` Akhil Goyal
2020-01-31 15:33 ` Anoob Joseph
2020-02-01 9:35 ` Anoob Joseph
2020-02-03 13:25 ` Akhil Goyal
2020-01-31 10:03 ` [dpdk-dev] [PATCH v3 15/15] net/octeontx2: sync inline tag type Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 00/15] add OCTEON TX2 inline IPsec support Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 01/15] common/octeontx2: add CPT LF mbox for inline inbound Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 02/15] common/octeontx2: add routine to check if sec capable otx2 Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 03/15] crypto/octeontx2: configure for inline IPsec Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 04/15] net/octeontx2: create eth security ctx Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 05/15] net/octeontx2: add security in eth dev configure Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 06/15] net/octeontx2: add eth security capabilities Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 07/15] crypto/octeontx2: enable CPT to share QP with ethdev Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 08/15] net/octeontx2: add eth security session operations Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 09/15] net/octeontx2: add datapath ops in eth security ctx Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 10/15] net/octeontx2: add lookup mem changes to hold sa indices Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 11/15] net/octeontx2: add inline ipsec Rx path changes Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 12/15] drivers/octeontx2: add sec in Rx fastpath framework Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 13/15] drivers/octeontx2: add sec in Tx " Anoob Joseph
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 14/15] net/octeontx2: add inline Tx path changes Anoob Joseph
2020-02-05 23:19 ` Thomas Monjalon
2020-02-04 11:17 ` [dpdk-dev] [PATCH v4 15/15] net/octeontx2: sync inline tag type Anoob Joseph
2020-02-04 16:10 ` Akhil Goyal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VE1PR04MB663940487EC74F9FFF5B61C7E6030@VE1PR04MB6639.eurprd04.prod.outlook.com \
--to=akhil.goyal@nxp.com \
--cc=adwivedi@marvell.com \
--cc=anoobj@marvell.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=ktejasree@marvell.com \
--cc=lbartosik@marvell.com \
--cc=marchana@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=pathreya@marvell.com \
--cc=pbhagavatula@marvell.com \
--cc=thomas@monjalon.net \
--cc=vattunuru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).