From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: Hemant Agrawal <hemant.agrawal@nxp.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: Akhil Goyal <akhil.goyal@nxp.com>
Subject: Re: [dpdk-dev] [PATCH v3 07/13] crypto/dpaa_sec: add AES-GCM support for lookaside case
Date: Thu, 7 Nov 2019 08:48:07 +0000 [thread overview]
Message-ID: <VI1PR0401MB2541DB8BB078F3B6E02B2A7189780@VI1PR0401MB2541.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20191106051731.3625-7-hemant.agrawal@nxp.com>
Hi Akhil,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Hemant Agrawal
> Sent: Wednesday, November 6, 2019 10:47 AM
> To: dev@dpdk.org
> Cc: Akhil Goyal <akhil.goyal@nxp.com>
> Subject: [dpdk-dev] [PATCH v3 07/13] crypto/dpaa_sec: add AES-GCM
> support for lookaside case
>
> This patch add support for AES-128-GCM, when used in proto lookaside
> mode.
>
> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
> drivers/crypto/dpaa_sec/dpaa_sec.c | 309 ++++++++++++++++++++---------
> 1 file changed, 211 insertions(+), 98 deletions(-)
>
> diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c
> b/drivers/crypto/dpaa_sec/dpaa_sec.c
> index 0ef17ee00..27a31d065 100644
> --- a/drivers/crypto/dpaa_sec/dpaa_sec.c
> +++ b/drivers/crypto/dpaa_sec/dpaa_sec.c
> @@ -382,12 +382,14 @@ dpaa_sec_prep_ipsec_cdb(dpaa_sec_session
> *ses)
> cipherdata.algtype = ses->cipher_key.alg;
> cipherdata.algmode = ses->cipher_key.algmode;
>
> - authdata.key = (size_t)ses->auth_key.data;
> - authdata.keylen = ses->auth_key.length;
> - authdata.key_enc_flags = 0;
> - authdata.key_type = RTA_DATA_IMM;
> - authdata.algtype = ses->auth_key.alg;
> - authdata.algmode = ses->auth_key.algmode;
> + if (ses->auth_key.length) {
> + authdata.key = (size_t)ses->auth_key.data;
> + authdata.keylen = ses->auth_key.length;
> + authdata.key_enc_flags = 0;
> + authdata.key_type = RTA_DATA_IMM;
> + authdata.algtype = ses->auth_key.alg;
> + authdata.algmode = ses->auth_key.algmode;
> + }
>
> cdb->sh_desc[0] = cipherdata.keylen;
> cdb->sh_desc[1] = authdata.keylen;
> @@ -2523,33 +2525,76 @@ dpaa_sec_sym_session_clear(struct
> rte_cryptodev *dev,
>
> #ifdef RTE_LIBRTE_SECURITY
> static int
> -dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
> - struct rte_security_session_conf *conf,
> - void *sess)
> +dpaa_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform,
> + struct rte_security_ipsec_xform *ipsec_xform,
> + dpaa_sec_session *session)
> {
> - struct dpaa_sec_dev_private *internals = dev->data->dev_private;
> - struct rte_security_ipsec_xform *ipsec_xform = &conf->ipsec;
> - struct rte_crypto_auth_xform *auth_xform = NULL;
> - struct rte_crypto_cipher_xform *cipher_xform = NULL;
> - dpaa_sec_session *session = (dpaa_sec_session *)sess;
> - uint32_t i;
> -
> PMD_INIT_FUNC_TRACE();
>
> - memset(session, 0, sizeof(dpaa_sec_session));
> - if (ipsec_xform->direction ==
> RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
> - cipher_xform = &conf->crypto_xform->cipher;
> - if (conf->crypto_xform->next)
> - auth_xform = &conf->crypto_xform->next->auth;
> - } else {
> - auth_xform = &conf->crypto_xform->auth;
> - if (conf->crypto_xform->next)
> - cipher_xform = &conf->crypto_xform->next-
> >cipher;
> + session->aead_key.data = rte_zmalloc(NULL, aead_xform-
> >key.length,
> + RTE_CACHE_LINE_SIZE);
> + if (session->aead_key.data == NULL && aead_xform->key.length >
> 0) {
> + DPAA_SEC_ERR("No Memory for aead key");
> + return -1;
> }
> - session->proto_alg = conf->protocol;
> - session->ctxt = DPAA_SEC_IPSEC;
> + memcpy(session->aead_key.data, aead_xform->key.data,
> + aead_xform->key.length);
> +
> + session->digest_length = aead_xform->digest_length;
> + session->aead_key.length = aead_xform->key.length;
> +
> + switch (aead_xform->algo) {
> + case RTE_CRYPTO_AEAD_AES_GCM:
> + switch (session->digest_length) {
> + case 8:
> + session->aead_key.alg = OP_PCL_IPSEC_AES_GCM8;
> + break;
> + case 12:
> + session->aead_key.alg =
> OP_PCL_IPSEC_AES_GCM12;
> + break;
> + case 16:
> + session->aead_key.alg =
> OP_PCL_IPSEC_AES_GCM16;
> + break;
> + default:
> + DPAA_SEC_ERR("Crypto: Undefined GCM digest
> %d",
> + session->digest_length);
> + return -1;
> + }
> + if (session->dir == DIR_ENC) {
> + memcpy(session->encap_pdb.gcm.salt,
> + (uint8_t *)&(ipsec_xform->salt), 4);
> + } else {
> + memcpy(session->decap_pdb.gcm.salt,
> + (uint8_t *)&(ipsec_xform->salt), 4);
> + }
> + session->aead_key.algmode = OP_ALG_AAI_GCM;
> + session->aead_alg = RTE_CRYPTO_AEAD_AES_GCM;
> + break;
[Hemant] There is a merge error. I see that you have already applied it.
Can you remove following line from the patch.
>>> start here.
> + if (session->dir == DIR_ENC) {
> + /* todo CCM salt length is 3 bytes, left shift 8 bits */
> + memcpy(session->encap_pdb.ccm.salt,
> + (uint8_t *)&(ipsec_xform->salt), 4);
> + } else {
> + memcpy(session->decap_pdb.ccm.salt,
> + (uint8_t *)&(ipsec_xform->salt), 4);
> + }
> + session->aead_key.algmode = OP_ALG_AAI_CCM;
> + session->aead_alg = RTE_CRYPTO_AEAD_AES_CCM;
> + break;
>>> end here.
> + default:
> + DPAA_SEC_ERR("Crypto: Undefined AEAD specified %u",
> + aead_xform->algo);
> + return -1;
> + }
> + return 0;
> +}
>
> - if (cipher_xform && cipher_xform->algo !=
> RTE_CRYPTO_CIPHER_NULL) {
> +static int
> +dpaa_sec_ipsec_proto_init(struct rte_crypto_cipher_xform
> *cipher_xform,
> + struct rte_crypto_auth_xform *auth_xform,
> + dpaa_sec_session *session)
> +{
> + if (cipher_xform) {
> session->cipher_key.data = rte_zmalloc(NULL,
> cipher_xform-
> >key.length,
> RTE_CACHE_LINE_SIZE);
> @@ -2558,31 +2603,10 @@ dpaa_sec_set_ipsec_session(__rte_unused
> struct rte_cryptodev *dev,
> DPAA_SEC_ERR("No Memory for cipher key");
> return -ENOMEM;
> }
> +
> + session->cipher_key.length = cipher_xform->key.length;
> memcpy(session->cipher_key.data, cipher_xform-
> >key.data,
> cipher_xform->key.length);
> - session->cipher_key.length = cipher_xform->key.length;
> -
> - switch (cipher_xform->algo) {
> - case RTE_CRYPTO_CIPHER_NULL:
> - session->cipher_key.alg = OP_PCL_IPSEC_NULL;
> - break;
> - case RTE_CRYPTO_CIPHER_AES_CBC:
> - session->cipher_key.alg = OP_PCL_IPSEC_AES_CBC;
> - session->cipher_key.algmode = OP_ALG_AAI_CBC;
> - break;
> - case RTE_CRYPTO_CIPHER_3DES_CBC:
> - session->cipher_key.alg = OP_PCL_IPSEC_3DES;
> - session->cipher_key.algmode = OP_ALG_AAI_CBC;
> - break;
> - case RTE_CRYPTO_CIPHER_AES_CTR:
> - session->cipher_key.alg = OP_PCL_IPSEC_AES_CTR;
> - session->cipher_key.algmode = OP_ALG_AAI_CTR;
> - break;
> - default:
> - DPAA_SEC_ERR("Crypto: Unsupported Cipher alg
> %u",
> - cipher_xform->algo);
> - goto out;
> - }
> session->cipher_alg = cipher_xform->algo;
> } else {
> session->cipher_key.data = NULL;
> @@ -2590,54 +2614,18 @@ dpaa_sec_set_ipsec_session(__rte_unused
> struct rte_cryptodev *dev,
> session->cipher_alg = RTE_CRYPTO_CIPHER_NULL;
> }
>
> - if (auth_xform && auth_xform->algo != RTE_CRYPTO_AUTH_NULL) {
> + if (auth_xform) {
> session->auth_key.data = rte_zmalloc(NULL,
> auth_xform->key.length,
> RTE_CACHE_LINE_SIZE);
> if (session->auth_key.data == NULL &&
> auth_xform->key.length > 0) {
> DPAA_SEC_ERR("No Memory for auth key");
> - rte_free(session->cipher_key.data);
> return -ENOMEM;
> }
> + session->auth_key.length = auth_xform->key.length;
> memcpy(session->auth_key.data, auth_xform->key.data,
> auth_xform->key.length);
> - session->auth_key.length = auth_xform->key.length;
> -
> - switch (auth_xform->algo) {
> - case RTE_CRYPTO_AUTH_NULL:
> - session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_NULL;
> - session->digest_length = 0;
> - break;
> - case RTE_CRYPTO_AUTH_MD5_HMAC:
> - session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_MD5_96;
> - session->auth_key.algmode = OP_ALG_AAI_HMAC;
> - break;
> - case RTE_CRYPTO_AUTH_SHA1_HMAC:
> - session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA1_96;
> - session->auth_key.algmode = OP_ALG_AAI_HMAC;
> - break;
> - case RTE_CRYPTO_AUTH_SHA224_HMAC:
> - session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA1_160;
> - session->auth_key.algmode = OP_ALG_AAI_HMAC;
> - break;
> - case RTE_CRYPTO_AUTH_SHA256_HMAC:
> - session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA2_256_128;
> - session->auth_key.algmode = OP_ALG_AAI_HMAC;
> - break;
> - case RTE_CRYPTO_AUTH_SHA384_HMAC:
> - session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA2_384_192;
> - session->auth_key.algmode = OP_ALG_AAI_HMAC;
> - break;
> - case RTE_CRYPTO_AUTH_SHA512_HMAC:
> - session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA2_512_256;
> - session->auth_key.algmode = OP_ALG_AAI_HMAC;
> - break;
> - default:
> - DPAA_SEC_ERR("Crypto: Unsupported auth alg %u",
> - auth_xform->algo);
> - goto out;
> - }
> session->auth_alg = auth_xform->algo;
> } else {
> session->auth_key.data = NULL;
> @@ -2645,12 +2633,142 @@ dpaa_sec_set_ipsec_session(__rte_unused
> struct rte_cryptodev *dev,
> session->auth_alg = RTE_CRYPTO_AUTH_NULL;
> }
>
> + switch (session->auth_alg) {
> + case RTE_CRYPTO_AUTH_SHA1_HMAC:
> + session->auth_key.alg = OP_PCL_IPSEC_HMAC_SHA1_96;
> + session->auth_key.algmode = OP_ALG_AAI_HMAC;
> + break;
> + case RTE_CRYPTO_AUTH_MD5_HMAC:
> + session->auth_key.alg = OP_PCL_IPSEC_HMAC_MD5_96;
> + session->auth_key.algmode = OP_ALG_AAI_HMAC;
> + break;
> + case RTE_CRYPTO_AUTH_SHA256_HMAC:
> + session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA2_256_128;
> + session->auth_key.algmode = OP_ALG_AAI_HMAC;
> + break;
> + case RTE_CRYPTO_AUTH_SHA384_HMAC:
> + session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA2_384_192;
> + session->auth_key.algmode = OP_ALG_AAI_HMAC;
> + break;
> + case RTE_CRYPTO_AUTH_SHA512_HMAC:
> + session->auth_key.alg =
> OP_PCL_IPSEC_HMAC_SHA2_512_256;
> + session->auth_key.algmode = OP_ALG_AAI_HMAC;
> + break;
> + case RTE_CRYPTO_AUTH_AES_CMAC:
> + session->auth_key.alg = OP_PCL_IPSEC_AES_CMAC_96;
> + break;
> + case RTE_CRYPTO_AUTH_NULL:
> + session->auth_key.alg = OP_PCL_IPSEC_HMAC_NULL;
> + break;
> + case RTE_CRYPTO_AUTH_SHA224_HMAC:
> + case RTE_CRYPTO_AUTH_AES_XCBC_MAC:
> + case RTE_CRYPTO_AUTH_SNOW3G_UIA2:
> + case RTE_CRYPTO_AUTH_SHA1:
> + case RTE_CRYPTO_AUTH_SHA256:
> + case RTE_CRYPTO_AUTH_SHA512:
> + case RTE_CRYPTO_AUTH_SHA224:
> + case RTE_CRYPTO_AUTH_SHA384:
> + case RTE_CRYPTO_AUTH_MD5:
> + case RTE_CRYPTO_AUTH_AES_GMAC:
> + case RTE_CRYPTO_AUTH_KASUMI_F9:
> + case RTE_CRYPTO_AUTH_AES_CBC_MAC:
> + case RTE_CRYPTO_AUTH_ZUC_EIA3:
> + DPAA_SEC_ERR("Crypto: Unsupported auth alg %u",
> + session->auth_alg);
> + return -1;
> + default:
> + DPAA_SEC_ERR("Crypto: Undefined Auth specified %u",
> + session->auth_alg);
> + return -1;
> + }
> +
> + switch (session->cipher_alg) {
> + case RTE_CRYPTO_CIPHER_AES_CBC:
> + session->cipher_key.alg = OP_PCL_IPSEC_AES_CBC;
> + session->cipher_key.algmode = OP_ALG_AAI_CBC;
> + break;
> + case RTE_CRYPTO_CIPHER_3DES_CBC:
> + session->cipher_key.alg = OP_PCL_IPSEC_3DES;
> + session->cipher_key.algmode = OP_ALG_AAI_CBC;
> + break;
> + case RTE_CRYPTO_CIPHER_AES_CTR:
> + session->cipher_key.alg = OP_PCL_IPSEC_AES_CTR;
> + session->cipher_key.algmode = OP_ALG_AAI_CTR;
> + break;
> + case RTE_CRYPTO_CIPHER_NULL:
> + session->cipher_key.alg = OP_PCL_IPSEC_NULL;
> + break;
> + case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
> + case RTE_CRYPTO_CIPHER_ZUC_EEA3:
> + case RTE_CRYPTO_CIPHER_3DES_ECB:
> + case RTE_CRYPTO_CIPHER_AES_ECB:
> + case RTE_CRYPTO_CIPHER_KASUMI_F8:
> + DPAA_SEC_ERR("Crypto: Unsupported Cipher alg %u",
> + session->cipher_alg);
> + return -1;
> + default:
> + DPAA_SEC_ERR("Crypto: Undefined Cipher specified %u",
> + session->cipher_alg);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int
> +dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
> + struct rte_security_session_conf *conf,
> + void *sess)
> +{
> + struct dpaa_sec_dev_private *internals = dev->data->dev_private;
> + struct rte_security_ipsec_xform *ipsec_xform = &conf->ipsec;
> + struct rte_crypto_auth_xform *auth_xform = NULL;
> + struct rte_crypto_cipher_xform *cipher_xform = NULL;
> + struct rte_crypto_aead_xform *aead_xform = NULL;
> + dpaa_sec_session *session = (dpaa_sec_session *)sess;
> + uint32_t i;
> + int ret;
> +
> + PMD_INIT_FUNC_TRACE();
> +
> + memset(session, 0, sizeof(dpaa_sec_session));
> + session->proto_alg = conf->protocol;
> + session->ctxt = DPAA_SEC_IPSEC;
> +
> + if (ipsec_xform->direction ==
> RTE_SECURITY_IPSEC_SA_DIR_EGRESS)
> + session->dir = DIR_ENC;
> + else
> + session->dir = DIR_DEC;
> +
> + if (conf->crypto_xform->type ==
> RTE_CRYPTO_SYM_XFORM_CIPHER) {
> + cipher_xform = &conf->crypto_xform->cipher;
> + if (conf->crypto_xform->next)
> + auth_xform = &conf->crypto_xform->next->auth;
> + ret = dpaa_sec_ipsec_proto_init(cipher_xform, auth_xform,
> + session);
> + } else if (conf->crypto_xform->type ==
> RTE_CRYPTO_SYM_XFORM_AUTH) {
> + auth_xform = &conf->crypto_xform->auth;
> + if (conf->crypto_xform->next)
> + cipher_xform = &conf->crypto_xform->next-
> >cipher;
> + ret = dpaa_sec_ipsec_proto_init(cipher_xform, auth_xform,
> + session);
> + } else if (conf->crypto_xform->type ==
> RTE_CRYPTO_SYM_XFORM_AEAD) {
> + aead_xform = &conf->crypto_xform->aead;
> + ret = dpaa_sec_ipsec_aead_init(aead_xform,
> + ipsec_xform, session);
> + } else {
> + DPAA_SEC_ERR("XFORM not specified");
> + ret = -EINVAL;
> + goto out;
> + }
> + if (ret) {
> + DPAA_SEC_ERR("Failed to process xform");
> + goto out;
> + }
> +
> if (ipsec_xform->direction ==
> RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
> if (ipsec_xform->tunnel.type ==
> RTE_SECURITY_IPSEC_TUNNEL_IPV4) {
> - memset(&session->encap_pdb, 0,
> - sizeof(struct ipsec_encap_pdb) +
> - sizeof(session->ip4_hdr));
> session->ip4_hdr.ip_v = IPVERSION;
> session->ip4_hdr.ip_hl = 5;
> session->ip4_hdr.ip_len = rte_cpu_to_be_16( @@ -
> 2673,9 +2791,6 @@ dpaa_sec_set_ipsec_session(__rte_unused struct
> rte_cryptodev *dev,
> session->encap_pdb.ip_hdr_len = sizeof(struct ip);
> } else if (ipsec_xform->tunnel.type ==
> RTE_SECURITY_IPSEC_TUNNEL_IPV6) {
> - memset(&session->encap_pdb, 0,
> - sizeof(struct ipsec_encap_pdb) +
> - sizeof(session->ip6_hdr));
> session->ip6_hdr.vtc_flow = rte_cpu_to_be_32(
> DPAA_IPv6_DEFAULT_VTC_FLOW |
> ((ipsec_xform->tunnel.ipv6.dscp <<
> @@ -2707,10 +2822,9 @@ dpaa_sec_set_ipsec_session(__rte_unused struct
> rte_cryptodev *dev,
> if (ipsec_xform->options.esn)
> session->encap_pdb.options |= PDBOPTS_ESP_ESN;
> session->encap_pdb.spi = ipsec_xform->spi;
> - session->dir = DIR_ENC;
> +
> } else if (ipsec_xform->direction ==
> RTE_SECURITY_IPSEC_SA_DIR_INGRESS) {
> - memset(&session->decap_pdb, 0, sizeof(struct
> ipsec_decap_pdb));
> if (ipsec_xform->tunnel.type ==
> RTE_SECURITY_IPSEC_TUNNEL_IPV4)
> session->decap_pdb.options = sizeof(struct ip) << 16;
> else
> @@ -2718,7 +2832,6 @@ dpaa_sec_set_ipsec_session(__rte_unused struct
> rte_cryptodev *dev,
> sizeof(struct rte_ipv6_hdr) << 16;
> if (ipsec_xform->options.esn)
> session->decap_pdb.options |= PDBOPTS_ESP_ESN;
> - session->dir = DIR_DEC;
> } else
> goto out;
> rte_spinlock_lock(&internals->lock);
> --
> 2.17.1
next prev parent reply other threads:[~2019-11-07 8:48 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-25 8:33 [dpdk-dev] [PATCH 1/8] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-10-25 8:33 ` [dpdk-dev] [PATCH 2/8] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-10-25 8:33 ` [dpdk-dev] [PATCH 3/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25 8:33 ` [dpdk-dev] [PATCH 4/8] crypto/dpaa2_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-10-25 8:33 ` [dpdk-dev] [PATCH 5/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25 8:33 ` [dpdk-dev] [PATCH 6/8] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-10-25 8:33 ` [dpdk-dev] [PATCH 7/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25 8:33 ` [dpdk-dev] [PATCH 8/8] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 02/13] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 03/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 04/13] crypto/dpaa2_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 05/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 06/13] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 07/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 08/13] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 09/13] crypto/dpaa2_sec: enable warning with truncated sha256 Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 10/13] crypto/dpaa2_sec: remove unwanted context type check Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 11/13] crypto/dpaa_sec: use macros in queue attach and detach Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 12/13] crypto/dpaa2_sec: use aes-ctr initial counter as 1 Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 13/13] crypto/dpaa_sec: enable ipsec aes-ctr to use nonce Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 02/13] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 03/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 04/13] crypto/dpaa2_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 05/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 06/13] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 07/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-07 8:48 ` Hemant Agrawal [this message]
2019-11-07 10:07 ` Akhil Goyal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 08/13] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 09/13] crypto/dpaa2_sec: enable warning with truncated sha256 Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 10/13] crypto/dpaa2_sec: remove unwanted context type check Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 11/13] crypto/dpaa_sec: use macros in queue attach and detach Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 12/13] crypto/dpaa2_sec: use aes-ctr initial counter as 1 Hemant Agrawal
2019-11-06 5:17 ` [dpdk-dev] [PATCH v3 13/13] crypto/dpaa_sec: enable ipsec aes-ctr to use nonce Hemant Agrawal
2019-11-06 13:09 ` [dpdk-dev] [PATCH v3 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR0401MB2541DB8BB078F3B6E02B2A7189780@VI1PR0401MB2541.eurprd04.prod.outlook.com \
--to=hemant.agrawal@nxp.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).