From: Dekel Peled <dekelp@mellanox.com>
To: Yongseok Koh <yskoh@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Shahaf Shuler <shahafs@mellanox.com>,
Ori Kam <orika@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH] net/mlx5: allow flow rule with attribute egress
Date: Wed, 3 Oct 2018 06:06:07 +0000 [thread overview]
Message-ID: <VI1PR05MB4224A336385FC107970884B3B6E90@VI1PR05MB4224.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <20180929092415.GB95127@minint-98vp2qg>
Thanks, PSB.
> -----Original Message-----
> From: Yongseok Koh
> Sent: Saturday, September 29, 2018 12:24 PM
> To: Dekel Peled <dekelp@mellanox.com>
> Cc: dev@dpdk.org; Shahaf Shuler <shahafs@mellanox.com>; Ori Kam
> <orika@mellanox.com>
> Subject: Re: [PATCH] net/mlx5: allow flow rule with attribute egress
>
> On Thu, Sep 27, 2018 at 05:25:30PM +0300, Dekel Peled wrote:
> > This patch complements [1], adding to MLX5 PMD the option to set flow
> > rule for egress traffic.
> >
> > [1] "net/mlx5: support metadata as flow rule criteria"
> > http://mails.dpdk.org/archives/dev/2018-September/113275.html
> >
> > Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> > ---
> > drivers/net/mlx5/mlx5_flow.c | 54
> ++++++++++++++++++++++++++++++++++++++
> > drivers/net/mlx5/mlx5_flow.h | 6 +++++
> > drivers/net/mlx5/mlx5_flow_dv.c | 24 ++++++++++-------
> > drivers/net/mlx5/mlx5_flow_verbs.c | 7 ++++-
> > 4 files changed, 80 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.c
> > b/drivers/net/mlx5/mlx5_flow.c index 9581691..79a06df 100644
> > --- a/drivers/net/mlx5/mlx5_flow.c
> > +++ b/drivers/net/mlx5/mlx5_flow.c
> > @@ -644,6 +644,8 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > *
> > * @param[in] action_flags
> > * Bit-fields that holds the actions detected until now.
> > + * @param[in] attr
> > + * Attributes of flow that includes this action.
> > * @param[out] error
> > * Pointer to error structure.
> > *
> > @@ -652,6 +654,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > */
> > int
> > mlx5_flow_validate_action_flag(uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error) {
> >
> > @@ -668,6 +671,12 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "can't have 2 flag"
> > " actions in same flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
>
> These two lines could be one line.
Can't do, It exceeds the 80 characters limit.
>
> > + "flag action not supported for "
> > + "egress");
> > return 0;
> > }
> >
> > @@ -678,6 +687,8 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > * Pointer to the queue action.
> > * @param[in] action_flags
> > * Bit-fields that holds the actions detected until now.
> > + * @param[in] attr
> > + * Attributes of flow that includes this action.
> > * @param[out] error
> > * Pointer to error structure.
> > *
> > @@ -687,6 +698,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> > rte_eth_dev *dev, int32_t priority, int
> > mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
> > uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error) {
> > const struct rte_flow_action_mark *mark = action->conf; @@ -715,6
> > +727,12 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev,
> int32_t priority,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "can't have 2 flag actions in same"
> > " flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
>
> Ditto. There are a few more occurrences below.
Can't do, It exceeds the 80 characters limit.
>
> > + "mark action not supported for "
> > + "egress");
> > return 0;
> > }
> >
> > @@ -723,6 +741,8 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > *
> > * @param[in] action_flags
> > * Bit-fields that holds the actions detected until now.
> > + * @param[in] attr
> > + * Attributes of flow that includes this action.
> > * @param[out] error
> > * Pointer to error structure.
> > *
> > @@ -731,6 +751,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > */
> > int
> > mlx5_flow_validate_action_drop(uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error) {
> > if (action_flags & MLX5_ACTION_FLAG) @@ -747,6 +768,12 @@
> uint32_t
> > mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "can't have 2 fate actions in"
> > " same flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
> > + "drop action not supported for "
> > + "egress");
> > return 0;
> > }
> >
> > @@ -759,6 +786,8 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > * Bit-fields that holds the actions detected until now.
> > * @param[in] dev
> > * Pointer to the Ethernet device structure.
> > + * @param[in] attr
> > + * Attributes of flow that includes this action.
> > * @param[out] error
> > * Pointer to error structure.
> > *
> > @@ -769,6 +798,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> > rte_eth_dev *dev, int32_t priority,
> mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
> > uint64_t action_flags,
> > struct rte_eth_dev *dev,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error)
> > {
> > struct priv *priv = dev->data->dev_private; @@ -790,6 +820,12 @@
> > uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t
> priority,
> >
> RTE_FLOW_ERROR_TYPE_ACTION_CONF,
> > &queue->index,
> > "queue is not configured");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
> > + "queue action not supported for "
> > + "egress");
> > return 0;
> > }
> >
> > @@ -802,6 +838,8 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > * Bit-fields that holds the actions detected until now.
> > * @param[in] dev
> > * Pointer to the Ethernet device structure.
> > + * @param[in] attr
> > + * Attributes of flow that includes this action.
> > * @param[out] error
> > * Pointer to error structure.
> > *
> > @@ -812,6 +850,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> > rte_eth_dev *dev, int32_t priority, mlx5_flow_validate_action_rss(const
> struct rte_flow_action *action,
> > uint64_t action_flags,
> > struct rte_eth_dev *dev,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error) {
> > struct priv *priv = dev->data->dev_private; @@ -866,6 +905,12 @@
> > uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t
> priority,
> > (error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION_CONF,
> > &rss->queue[i], "queue is not configured");
> > }
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
> > + "rss action not supported for "
> > + "egress");
> > return 0;
> > }
> >
> > @@ -874,6 +919,8 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > *
> > * @param[in] dev
> > * Pointer to the Ethernet device structure.
> > + * @param[in] attr
> > + * Attributes of flow that includes this action.
> > * @param[out] error
> > * Pointer to error structure.
> > *
> > @@ -882,6 +929,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > */
> > int
> > mlx5_flow_validate_action_count(struct rte_eth_dev *dev,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error)
> > {
> > struct priv *priv = dev->data->dev_private; @@ -890,6 +938,12 @@
> > uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t
> priority,
> > return rte_flow_error_set(error, ENOTSUP,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "flow counters are not supported.");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
> > + "count action not supported for "
> > + "egress");
> > return 0;
> > }
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.h
> > b/drivers/net/mlx5/mlx5_flow.h index d91ae17..a353d07 100644
> > --- a/drivers/net/mlx5/mlx5_flow.h
> > +++ b/drivers/net/mlx5/mlx5_flow.h
> > @@ -283,21 +283,27 @@ uint64_t mlx5_flow_hashfields_adjust(struct
> > mlx5_flow *dev_flow, int tunnel, uint32_t
> mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
> > uint32_t subpriority);
> > int mlx5_flow_validate_action_count(struct rte_eth_dev *dev,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error); int
> > mlx5_flow_validate_action_drop(uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error); int
> > mlx5_flow_validate_action_flag(uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error); int
> > mlx5_flow_validate_action_mark(const struct rte_flow_action *action,
> > uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error); int
> > mlx5_flow_validate_action_queue(const struct rte_flow_action *action,
> > uint64_t action_flags,
> > struct rte_eth_dev *dev,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error); int
> > mlx5_flow_validate_action_rss(const struct rte_flow_action *action,
> > uint64_t action_flags,
> > struct rte_eth_dev *dev,
> > + const struct rte_flow_attr *attr,
> > struct rte_flow_error *error);
> > int mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
> > const struct rte_flow_attr *attributes, diff --
> git
> > a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> > index 2439f5e..1f3fcb8 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -117,21 +117,17 @@
> >
> RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
> > NULL,
> > "priority out of range");
> > - if (attributes->egress)
> > - return rte_flow_error_set(error, ENOTSUP,
> > -
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > - NULL,
> > - "egress is not supported");
> > if (attributes->transfer)
> > return rte_flow_error_set(error, ENOTSUP,
> >
> RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
> > NULL,
> > "transfer is not supported");
> > - if (!attributes->ingress)
> > + if (!(attributes->egress ^ attributes->ingress))
> > return rte_flow_error_set(error, ENOTSUP,
> > -
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> > + RTE_FLOW_ERROR_TYPE_ATTR,
> > NULL,
> > - "ingress attribute is mandatory");
> > + "must specify exactly one of "
> > + "ingress or egress");
> > return 0;
> > }
> >
> > @@ -288,6 +284,7 @@
> > break;
> > case RTE_FLOW_ACTION_TYPE_FLAG:
> > ret = mlx5_flow_validate_action_flag(action_flags,
> > + attr,
> > error);
>
> Merge into one line as much as you can. Same comment for the rest.
Done.
>
> > if (ret < 0)
> > return ret;
> > @@ -297,6 +294,7 @@
> > case RTE_FLOW_ACTION_TYPE_MARK:
> > ret = mlx5_flow_validate_action_mark(actions,
> > action_flags,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -305,6 +303,7 @@
> > break;
> > case RTE_FLOW_ACTION_TYPE_DROP:
> > ret = mlx5_flow_validate_action_drop(action_flags,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -314,6 +313,7 @@
> > case RTE_FLOW_ACTION_TYPE_QUEUE:
> > ret = mlx5_flow_validate_action_queue(actions,
> > action_flags, dev,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -323,6 +323,7 @@
> > case RTE_FLOW_ACTION_TYPE_RSS:
> > ret = mlx5_flow_validate_action_rss(actions,
> > action_flags, dev,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -330,7 +331,7 @@
> > ++actions_n;
> > break;
> > case RTE_FLOW_ACTION_TYPE_COUNT:
> > - ret = mlx5_flow_validate_action_count(dev, error);
> > + ret = mlx5_flow_validate_action_count(dev, attr,
> error);
> > if (ret < 0)
> > return ret;
> > action_flags |= MLX5_ACTION_COUNT; @@ -1080,6
> +1081,7 @@
> > queue = action->conf;
> > flow->rss.queue_num = 1;
> > (*flow->queue)[0] = queue->index;
> > + flow->actions |= MLX5_ACTION_QUEUE;
> > break;
> > case RTE_FLOW_ACTION_TYPE_RSS:
> > rss = action->conf;
> > @@ -1091,6 +1093,7 @@
> > flow->rss.types = rss->types;
> > flow->rss.level = rss->level;
> > /* Added to array only in apply since we need the QP */
> > + flow->actions |= MLX5_ACTION_RSS;
>
> Let's do the same for the rest of actions.
Done.
>
> > break;
> > default:
> > break;
> > @@ -1301,7 +1304,8 @@
> > dv->actions[n].type =
> MLX5DV_FLOW_ACTION_DEST_IBV_QP;
> > dv->actions[n].qp = dv->hrxq->qp;
> > n++;
> > - } else {
> > + } else if (flow->actions &
> > + (MLX5_ACTION_QUEUE | MLX5_ACTION_RSS)) {
>
> The previous code is not wrong but definitely error-prone. Can you please
> make the same change for the verbs code? You can create a separate patch
> for this fix.
I will do it.
>
> > struct mlx5_hrxq *hrxq;
> > hrxq = mlx5_hrxq_get(dev, flow->key,
> > MLX5_RSS_HASH_KEY_LEN,
> > diff --git a/drivers/net/mlx5/mlx5_flow_verbs.c
> > b/drivers/net/mlx5/mlx5_flow_verbs.c
> > index 05ab5fd..b1aa704 100644
> > --- a/drivers/net/mlx5/mlx5_flow_verbs.c
> > +++ b/drivers/net/mlx5/mlx5_flow_verbs.c
> > @@ -1112,6 +1112,7 @@
> > break;
> > case RTE_FLOW_ACTION_TYPE_FLAG:
> > ret = mlx5_flow_validate_action_flag(action_flags,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -1120,6 +1121,7 @@
> > case RTE_FLOW_ACTION_TYPE_MARK:
> > ret = mlx5_flow_validate_action_mark(actions,
> > action_flags,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -1127,6 +1129,7 @@
> > break;
> > case RTE_FLOW_ACTION_TYPE_DROP:
> > ret = mlx5_flow_validate_action_drop(action_flags,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -1135,6 +1138,7 @@
> > case RTE_FLOW_ACTION_TYPE_QUEUE:
> > ret = mlx5_flow_validate_action_queue(actions,
> > action_flags, dev,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > @@ -1143,13 +1147,14 @@
> > case RTE_FLOW_ACTION_TYPE_RSS:
> > ret = mlx5_flow_validate_action_rss(actions,
> > action_flags, dev,
> > + attr,
> > error);
> > if (ret < 0)
> > return ret;
> > action_flags |= MLX5_ACTION_RSS;
> > break;
> > case RTE_FLOW_ACTION_TYPE_COUNT:
> > - ret = mlx5_flow_validate_action_count(dev, error);
> > + ret = mlx5_flow_validate_action_count(dev, attr,
> error);
> > if (ret < 0)
> > return ret;
> > action_flags |= MLX5_ACTION_COUNT;
> > --
> > 1.8.3.1
> >
next prev parent reply other threads:[~2018-10-03 6:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-27 14:25 Dekel Peled
2018-09-29 9:24 ` Yongseok Koh
2018-10-03 6:06 ` Dekel Peled [this message]
2018-10-03 7:28 ` Yongseok Koh
2018-10-03 13:02 ` Dekel Peled
2018-10-07 14:01 ` [dpdk-dev] [PATCH v2] " Dekel Peled
2018-10-08 18:55 ` Yongseok Koh
2018-10-11 8:14 ` Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR05MB4224A336385FC107970884B3B6E90@VI1PR05MB4224.eurprd05.prod.outlook.com \
--to=dekelp@mellanox.com \
--cc=dev@dpdk.org \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).