From: Bruce Richardson <bruce.richardson@intel.com>
To: Zhichao Zeng <zhichaox.zeng@intel.com>
Cc: <dev@dpdk.org>
Subject: Re: [PATCH] net/ice: support for more flexible loading of DDP package
Date: Wed, 28 Aug 2024 08:55:21 +0100 [thread overview]
Message-ID: <Zs7X6T0iNF7BVCCo@bricha3-mobl1.ger.corp.intel.com> (raw)
In-Reply-To: <20240828035335.1069153-1-zhichaox.zeng@intel.com>
On Wed, Aug 28, 2024 at 11:53:35AM +0800, Zhichao Zeng wrote:
> The "Dynamic Device Personalization" package is loaded at initialization
> time by the driver, but the specific package file loaded depends upon
> what package file is found first by searching through a hard-coded list
> of firmware paths.
>
> To enable greater control over the package loading, this commit two ways
> to support custom DDP packages:
> 1. Add device option to choose a specific DDP package file to load.
> For example:
> -a 80:00.0,ddp_pkg_file=/path/to/ice-version.pkg
> 2. Read firmware search path from
> "/sys/module/firmware_class/parameters/path" like the kernel behavior.
>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Hi Zhichao,
since there are two different methods being supported for picking a DDP
package this patch would be better split into two, one for each method
added.
The support for #1 above is already on-list as a standalone patch[1], so you
really only need to do a new patch for #2 above. However, I'm ok for you to
take my patch and include it in a 2-patch set for this if you prefer, since
both patches will be related to choosing a DDP file. I'll leave it up to
you whether v2 is a single patch for the search path, or a 2-patch set
including [1].
Regards,
/Bruce
[1] https://patches.dpdk.org/project/dpdk/patch/20240812152815.1132697-5-bruce.richardson@intel.com/
> ---
> doc/guides/nics/ice.rst | 12 +++++++
> drivers/net/ice/ice_ethdev.c | 61 ++++++++++++++++++++++++++++++++++++
> drivers/net/ice/ice_ethdev.h | 2 ++
> 3 files changed, 75 insertions(+)
>
> diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
> index ae975d19ad..0484fafbc1 100644
> --- a/doc/guides/nics/ice.rst
> +++ b/doc/guides/nics/ice.rst
> @@ -108,6 +108,18 @@ Runtime Configuration
>
> -a 80:00.0,default-mac-disable=1
>
> +- ``DDP Package File``
> +
> + Rather than have the driver search for the DDP package to load,
> + or to override what package is used,
> + the ``ddp_pkg_file`` option can be used to provide the path to a specific package file.
> + For example::
> +
> + -a 80:00.0,ddp_pkg_file=/path/to/ice-version.pkg
> +
> + There is also support for customizing the firmware search path, will read the search path
> + from "/sys/module/firmware_class/parameters/path" and try to load DDP package.
> +
> - ``Protocol extraction for per queue``
>
> Configure the RX queues to do protocol extraction into mbuf for protocol
> diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
> index 304f959b7e..bd78c14000 100644
> --- a/drivers/net/ice/ice_ethdev.c
> +++ b/drivers/net/ice/ice_ethdev.c
> @@ -36,6 +36,7 @@
> #define ICE_ONE_PPS_OUT_ARG "pps_out"
> #define ICE_RX_LOW_LATENCY_ARG "rx_low_latency"
> #define ICE_MBUF_CHECK_ARG "mbuf_check"
> +#define ICE_DDP_FILENAME "ddp_pkg_file"
>
> #define ICE_CYCLECOUNTER_MASK 0xffffffffffffffffULL
>
> @@ -52,6 +53,7 @@ static const char * const ice_valid_args[] = {
> ICE_RX_LOW_LATENCY_ARG,
> ICE_DEFAULT_MAC_DISABLE,
> ICE_MBUF_CHECK_ARG,
> + ICE_DDP_FILENAME,
> NULL
> };
>
> @@ -692,6 +694,18 @@ handle_field_name_arg(__rte_unused const char *key, const char *value,
> return 0;
> }
>
> +static int
> +handle_ddp_filename_arg(__rte_unused const char *key, const char *value, void *name_args)
> +{
> + const char **filename = name_args;
> + if (strlen(value) >= ICE_MAX_PKG_FILENAME_SIZE) {
> + PMD_DRV_LOG(ERR, "The DDP package filename is too long : '%s'", value);
> + return -1;
> + }
> + *filename = strdup(value);
> + return 0;
> +}
> +
> static void
> ice_check_proto_xtr_support(struct ice_hw *hw)
> {
> @@ -1873,6 +1887,22 @@ ice_load_pkg_type(struct ice_hw *hw)
> return package_type;
> }
>
> +static int ice_read_customized_path(char *pkg_file)
> +{
> + char buf[ICE_MAX_PKG_FILENAME_SIZE];
> + FILE *fp = fopen(ICE_PKG_FILE_CUSTOMIZED_PATH, "r");
> + if (fp == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to read CUSTOMIZED_PATH");
> + return -EIO;
> + }
> + if (fscanf(fp, "%s\n", buf) > 0)
> + strncpy(pkg_file, buf, ICE_MAX_PKG_FILENAME_SIZE);
> + else
> + return -EIO;
> +
> + return 0;
> +}
> +
> int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn)
> {
> struct ice_hw *hw = &adapter->hw;
> @@ -1882,12 +1912,28 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn)
> size_t bufsz;
> int err;
>
> + if (adapter->devargs.ddp_filename != NULL) {
> + strlcpy(pkg_file, adapter->devargs.ddp_filename, sizeof(pkg_file));
> + if (rte_firmware_read(pkg_file, &buf, &bufsz) == 0) {
> + goto load_fw;
> + } else {
> + PMD_INIT_LOG(ERR, "Cannot load DDP file: %s\n", pkg_file);
> + return -1;
> + }
> + }
> +
> if (!use_dsn)
> goto no_dsn;
>
> memset(opt_ddp_filename, 0, ICE_MAX_PKG_FILENAME_SIZE);
> snprintf(opt_ddp_filename, ICE_MAX_PKG_FILENAME_SIZE,
> "ice-%016" PRIx64 ".pkg", dsn);
> +
> + ice_read_customized_path(pkg_file);
> + strcat(pkg_file, opt_ddp_filename);
> + if (rte_firmware_read(pkg_file, &buf, &bufsz) == 0)
> + goto load_fw;
> +
> strncpy(pkg_file, ICE_PKG_FILE_SEARCH_PATH_UPDATES,
> ICE_MAX_PKG_FILENAME_SIZE);
> strcat(pkg_file, opt_ddp_filename);
> @@ -1901,6 +1947,10 @@ int ice_load_pkg(struct ice_adapter *adapter, bool use_dsn, uint64_t dsn)
> goto load_fw;
>
> no_dsn:
> + ice_read_customized_path(pkg_file);
> + if (rte_firmware_read(pkg_file, &buf, &bufsz) == 0)
> + goto load_fw;
> +
> strncpy(pkg_file, ICE_PKG_FILE_UPDATES, ICE_MAX_PKG_FILENAME_SIZE);
> if (rte_firmware_read(pkg_file, &buf, &bufsz) == 0)
> goto load_fw;
> @@ -2217,6 +2267,14 @@ static int ice_parse_devargs(struct rte_eth_dev *dev)
> ret = rte_kvargs_process(kvlist, ICE_RX_LOW_LATENCY_ARG,
> &parse_bool, &ad->devargs.rx_low_latency);
>
> + if (ret)
> + goto bail;
> +
> + ret = rte_kvargs_process(kvlist, ICE_DDP_FILENAME,
> + &handle_ddp_filename_arg, &ad->devargs.ddp_filename);
> + if (ret)
> + goto bail;
> +
> bail:
> rte_kvargs_free(kvlist);
> return ret;
> @@ -2689,6 +2747,8 @@ ice_dev_close(struct rte_eth_dev *dev)
> ice_free_hw_tbls(hw);
> rte_free(hw->port_info);
> hw->port_info = NULL;
> + free((void *)(uintptr_t)ad->devargs.ddp_filename);
> + ad->devargs.ddp_filename = NULL;
> ice_shutdown_all_ctrlq(hw, true);
> rte_free(pf->proto_xtr);
> pf->proto_xtr = NULL;
> @@ -6981,6 +7041,7 @@ RTE_PMD_REGISTER_PARAM_STRING(net_ice,
> ICE_PROTO_XTR_ARG "=[queue:]<vlan|ipv4|ipv6|ipv6_flow|tcp|ip_offset>"
> ICE_SAFE_MODE_SUPPORT_ARG "=<0|1>"
> ICE_DEFAULT_MAC_DISABLE "=<0|1>"
> + ICE_DDP_FILENAME "=</path/to/file>"
> ICE_RX_LOW_LATENCY_ARG "=<0|1>");
>
> RTE_LOG_REGISTER_SUFFIX(ice_logtype_init, init, NOTICE);
> diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
> index 3ea9f37dc8..2781362d04 100644
> --- a/drivers/net/ice/ice_ethdev.h
> +++ b/drivers/net/ice/ice_ethdev.h
> @@ -51,6 +51,7 @@
> #define ICE_PKG_FILE_UPDATES "/lib/firmware/updates/intel/ice/ddp/ice.pkg"
> #define ICE_PKG_FILE_SEARCH_PATH_DEFAULT "/lib/firmware/intel/ice/ddp/"
> #define ICE_PKG_FILE_SEARCH_PATH_UPDATES "/lib/firmware/updates/intel/ice/ddp/"
> +#define ICE_PKG_FILE_CUSTOMIZED_PATH "/sys/module/firmware_class/parameters/path"
> #define ICE_MAX_PKG_FILENAME_SIZE 256
>
> #define MAX_ACL_NORMAL_ENTRIES 256
> @@ -568,6 +569,7 @@ struct ice_devargs {
> /* Name of the field. */
> char xtr_field_name[RTE_MBUF_DYN_NAMESIZE];
> uint64_t mbuf_check;
> + const char *ddp_filename;
> };
>
> /**
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-08-28 7:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-28 3:53 Zhichao Zeng
2024-08-28 7:55 ` Bruce Richardson [this message]
2024-08-28 8:53 ` Zeng, ZhichaoX
2024-08-29 3:35 ` [PATCH v2] net/ice: support customized search path for " Zhichao Zeng
2024-08-29 3:41 ` Zhichao Zeng
2024-09-09 12:13 ` Bruce Richardson
2024-09-12 7:47 ` [PATCH v3] " Zhichao Zeng
2024-09-12 8:01 ` Zhichao Zeng
2024-09-13 6:15 ` [PATCH v4] " Zhichao Zeng
2024-09-13 10:57 ` Bruce Richardson
2024-09-19 3:29 ` [PATCH v5] " Zhichao Zeng
2024-09-19 7:49 ` Bruce Richardson
2024-09-20 8:34 ` Zeng, ZhichaoX
2024-09-20 9:04 ` Bruce Richardson
2024-09-20 10:05 ` [PATCH v6] " Zhichao Zeng
2024-10-01 13:54 ` Bruce Richardson
2024-10-01 14:03 ` Bruce Richardson
-- strict thread matches above, loose matches on Subject: below --
2024-08-28 1:57 [PATCH] net/ice: support for more flexible loading of " Zhichao Zeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zs7X6T0iNF7BVCCo@bricha3-mobl1.ger.corp.intel.com \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=zhichaox.zeng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).