From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Jerin Jacob <jerinjacobk@gmail.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: Jerin Jacob <jerinj@marvell.com>,
Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>, dpdk-dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH] net/octeontx2: fix ptype parsing disabled by default
Date: Mon, 25 Nov 2019 14:02:10 +0000 [thread overview]
Message-ID: <a6c019ec-978b-039b-cd8b-f4eca4ae18a9@intel.com> (raw)
In-Reply-To: <CALBAE1PKSgEGcNLRbUT=j4C=uZ9v3QKsNJfEJWoJCSxHztikSA@mail.gmail.com>
On 11/25/2019 1:00 PM, Jerin Jacob wrote:
> On Sat, Nov 23, 2019 at 5:58 PM <pbhagavatula@marvell.com> wrote:
>>
>> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>>
>> Enable Ptype parsing by default, only disable when `rte_eth_dev_set_ptypes`
>> is called with ptype_mask as 0.
>> This would enable applications that are dependent on packet type parsing
>> like l3fwd.
This also helps to store the configuration set by 'rte_eth_dev_set_ptypes()',
right? Previously it seems this was lost in next 'otx2_nix_configure()' call,
not sure if it worth mentioning in commit log.
>>
>> Fixes: d2706e15e6fb ("net/octeontx2: support reduced set of packet types")
>>
>> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> Acked-by: Jerin Jacob <jerinj@marvell.com>
>
> Applied to dpdk-next-net-mrvl/master. Thanks
>
>
>> ---
>> drivers/net/octeontx2/otx2_ethdev.c | 4 ++++
>> drivers/net/octeontx2/otx2_ethdev.h | 1 +
>> drivers/net/octeontx2/otx2_lookup.c | 7 +++++--
>> 3 files changed, 10 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
>> index ddab3aa06..eaf7ba917 100644
>> --- a/drivers/net/octeontx2/otx2_ethdev.c
>> +++ b/drivers/net/octeontx2/otx2_ethdev.c
>> @@ -622,6 +622,9 @@ nix_rx_offload_flags(struct rte_eth_dev *eth_dev)
>> if ((dev->rx_offloads & DEV_RX_OFFLOAD_TIMESTAMP))
>> flags |= NIX_RX_OFFLOAD_TSTAMP_F;
>>
>> + if (!dev->ptype_disable)
>> + flags |= NIX_RX_OFFLOAD_PTYPE_F;
>> +
>> return flags;
>> }
>>
>> @@ -2168,6 +2171,7 @@ otx2_eth_dev_init(struct rte_eth_dev *eth_dev)
>>
>> dev->configured = 0;
>> dev->drv_inited = true;
>> + dev->ptype_disable = 0;
>> dev->base = dev->bar2 + (RVU_BLOCK_ADDR_NIX0 << 20);
>> dev->lmt_addr = dev->bar2 + (RVU_BLOCK_ADDR_LMT << 20);
>>
>> diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
>> index eb1626309..987e7607c 100644
>> --- a/drivers/net/octeontx2/otx2_ethdev.h
>> +++ b/drivers/net/octeontx2/otx2_ethdev.h
>> @@ -276,6 +276,7 @@ struct otx2_eth_dev {
>> uint8_t configured_cints;
>> uint8_t configured_nb_rx_qs;
>> uint8_t configured_nb_tx_qs;
>> + uint8_t ptype_disable;
>> uint16_t nix_msixoff;
>> uintptr_t base;
>> uintptr_t lmt_addr;
>> diff --git a/drivers/net/octeontx2/otx2_lookup.c b/drivers/net/octeontx2/otx2_lookup.c
>> index 17c44e20e..bcf2ff4e8 100644
>> --- a/drivers/net/octeontx2/otx2_lookup.c
>> +++ b/drivers/net/octeontx2/otx2_lookup.c
>> @@ -67,10 +67,13 @@ otx2_nix_ptypes_set(struct rte_eth_dev *eth_dev, uint32_t ptype_mask)
>> {
>> struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
>>
>> - if (ptype_mask)
>> + if (ptype_mask) {
>> dev->rx_offload_flags |= NIX_RX_OFFLOAD_PTYPE_F;
>> - else
>> + dev->ptype_disable = 0;
>> + } else {
>> dev->rx_offload_flags &= ~NIX_RX_OFFLOAD_PTYPE_F;
>> + dev->ptype_disable = 1;
>> + }
>>
>> otx2_eth_set_rx_function(eth_dev);
>>
>> --
>> 2.17.1
>>
next prev parent reply other threads:[~2019-11-25 14:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-23 8:58 pbhagavatula
2019-11-25 13:00 ` Jerin Jacob
2019-11-25 14:02 ` Ferruh Yigit [this message]
2019-11-25 15:55 ` Pavan Nikhilesh Bhagavatula
2019-11-25 16:09 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a6c019ec-978b-039b-cd8b-f4eca4ae18a9@intel.com \
--to=ferruh.yigit@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=jerinjacobk@gmail.com \
--cc=kirankumark@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=pbhagavatula@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).