[dpdk-dev] [PATCH v2] testpmd: add option to not start device

[dpdk-dev] [PATCH v2] testpmd: add option to not start device

[Stephen Hemminger]

Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).

Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
v2 -- add new option to guide in doc

 app/test-pmd/parameters.c             | 4 ++++
 app/test-pmd/testpmd.c                | 7 ++++++-
 app/test-pmd/testpmd.h                | 1 +
 doc/guides/testpmd_app_ug/run_app.rst | 6 ++++++
 4 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 16358ea00c9f..5244872c4aa8 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -174,6 +174,7 @@ usage(char* progname)
 	printf("  --txonly-multi-flow: generate multiple flows in txonly mode\n");
 	printf("  --disable-link-check: disable check on link status when "
 	       "starting/stopping ports.\n");
+	printf("  --disable-device-start: do not automatically start port\n");
 	printf("  --no-lsc-interrupt: disable link status change interrupt.\n");
 	printf("  --no-rmv-interrupt: disable device removal interrupt.\n");
 	printf("  --bitrate-stats=N: set the logical core N to perform "
@@ -634,6 +635,7 @@ launch_args_parse(int argc, char** argv)
 		{ "txpkts",			1, 0, 0 },
 		{ "txonly-multi-flow",		0, 0, 0 },
 		{ "disable-link-check",		0, 0, 0 },
+		{ "disable-device-start",	0, 0, 0 },
 		{ "no-lsc-interrupt",		0, 0, 0 },
 		{ "no-rmv-interrupt",		0, 0, 0 },
 		{ "print-event",		1, 0, 0 },
@@ -1196,6 +1198,8 @@ launch_args_parse(int argc, char** argv)
 				no_flush_rx = 1;
 			if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
 				no_link_check = 1;
+			if (!strcmp(lgopts[opt_idx].name, "disable-device-start"))
+				no_device_start = 1;
 			if (!strcmp(lgopts[opt_idx].name, "no-lsc-interrupt"))
 				lsc_interrupt = 0;
 			if (!strcmp(lgopts[opt_idx].name, "no-rmv-interrupt"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 3ed3523b791e..807ee0c823b8 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -339,6 +339,11 @@ uint8_t flow_isolate_all;
  */
 uint8_t no_link_check = 0; /* check by default */
 
+/*
+ * Don't automatically start all ports in interactive mode.
+ */
+uint8_t no_device_start = 0;
+
 /*
  * Enable link status change notification
  */
@@ -3288,7 +3293,7 @@ main(int argc, char** argv)
 		}
 	}
 
-	if (start_port(RTE_PORT_ALL) != 0)
+	if (!no_device_start && start_port(RTE_PORT_ALL) != 0)
 		rte_exit(EXIT_FAILURE, "Start ports failed\n");
 
 	/* set all ports to promiscuous mode by default */
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index e3a6f7c7178c..fd8dccdf08f1 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -321,6 +321,7 @@ extern uint8_t flow_isolate_all; /**< set by "--flow-isolate-all */
 extern uint8_t  mp_alloc_type;
 /**< set by "--mp-anon" or "--mp-alloc" parameter */
 extern uint8_t no_link_check; /**<set by "--disable-link-check" parameter */
+extern uint8_t no_device_start; /**<set by "--disable-device-start" parameter */
 extern volatile int test_done; /* stop packet forwarding when set to 1. */
 extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
 extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index e7db52068623..d0d89b3a30db 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -344,6 +344,12 @@ The command line options are:
 
     Disable check on link status when starting/stopping ports.
 
+*   ``--disable-device-start``
+
+    Do not automatically start all ports. This allows testing
+    configuration of rx and tx queues before device is started
+    for the first time.
+
 *   ``--no-lsc-interrupt``
 
     Disable LSC interrupts for all ports, even those supporting it.
-- 
2.20.1

Re: [dpdk-dev] [PATCH v2] testpmd: add option to not start device

[Ferruh Yigit]

On 7/16/2019 7:42 PM, Stephen Hemminger wrote:
> Some configuration options can not be tested properly with testpmd
> because it automatically starts all ports. This makes it harder
> to test driver handling of configuration options:
> (for example rx_deferred_start).
> 
> Add new command line flag --disable-device-start which skips
> the device start. The port can then be started manually later.
> 
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

Applied to dpdk-next-net/master, thanks.