From: Anatoly Burakov <anatoly.burakov@intel.com>
To: dev@dpdk.org
Subject: [PATCH v1 08/42] net/e1000/base: add misc definitions for i225
Date: Fri, 31 Jan 2025 12:58:21 +0000 [thread overview]
Message-ID: <b1913b91e4262d728cf24855d1c9c43d52a5bd41.1738328107.git.anatoly.burakov@intel.com> (raw)
In-Reply-To: <cover.1738328106.git.anatoly.burakov@intel.com>
Add in various miscellaneous definitions (Rx/Tx, RSS, etc.) for i225
series NICs. This is mostly identical to IGC driver, with some minor
differences due to the way IGC driver was originally generated.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
drivers/net/intel/e1000/base/e1000_defines.h | 107 +++++++++++++++++++
drivers/net/intel/e1000/base/e1000_i225.h | 59 ++++++++++
drivers/net/intel/e1000/base/e1000_regs.h | 30 ++++++
3 files changed, 196 insertions(+)
diff --git a/drivers/net/intel/e1000/base/e1000_defines.h b/drivers/net/intel/e1000/base/e1000_defines.h
index a32100195a..44d6888824 100644
--- a/drivers/net/intel/e1000/base/e1000_defines.h
+++ b/drivers/net/intel/e1000/base/e1000_defines.h
@@ -188,6 +188,15 @@
#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_DTXMXPKTSZ_TSN 0x19 /* 1600 bytes of max TX DMA packet size */
+#define E1000_TXPBSIZE_TSN 0x04145145 /* 5k bytes buffer for each queue */
+
+/* Transmit Scheduling */
+#define E1000_TQAVCTRL_TRANSMIT_MODE_TSN 0x00000001
+#define E1000_TQAVCTRL_ENHANCED_QAV 0x00000008
+
+#define E1000_TXQCTL_QUEUE_MODE_LAUNCHT 0x00000001
+
/* Use byte values for the following shift parameters
* Usage:
* psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
@@ -594,6 +603,8 @@
#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_QVECTOR_MASK 0x7FFC /* Q-vector mask */
+#define E1000_ITR_VAL_MASK 0x04 /* ITR value mask */
#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
@@ -626,6 +637,7 @@
#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_ICS_DRSTA E1000_ICR_DRSTA /* Device Reset Aserted */
/* Extended Interrupt Cause Set */
#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
@@ -778,6 +790,75 @@
#define E1000_TIMINCA_INCPERIOD_SHIFT 24
#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF
+/* Time Sync Interrupt Cause/Mask Register Bits */
+#define TSINTR_SYS_WRAP (1 << 0) /* SYSTIM Wrap around. */
+#define TSINTR_TXTS (1 << 1) /* Transmit Timestamp. */
+#define TSINTR_TT0 (1 << 3) /* Target Time 0 Trigger. */
+#define TSINTR_TT1 (1 << 4) /* Target Time 1 Trigger. */
+#define TSINTR_AUTT0 (1 << 5) /* Auxiliary Timestamp 0 Taken. */
+#define TSINTR_AUTT1 (1 << 6) /* Auxiliary Timestamp 1 Taken. */
+
+#define TSYNC_INTERRUPTS TSINTR_TXTS
+
+/* Split Replication Receive Control */
+#define E1000_SRRCTL_TIMESTAMP 0x40000000
+#define E1000_SRRCTL_TIMER1SEL(timer) (((timer) & 0x3) << 14)
+#define E1000_SRRCTL_TIMER0SEL(timer) (((timer) & 0x3) << 17)
+
+/* Sample RX tstamp in PHY sop */
+#define E1000_TSYNCRXCTL_RXSYNSIG 0x00000400
+
+/* Sample TX tstamp in PHY sop */
+#define E1000_TSYNCTXCTL_TXSYNSIG 0x00000020
+
+/* TSAUXC Configuration Bits */
+#define TSAUXC_EN_TT0 (1 << 0) /* Enable target time 0. */
+#define TSAUXC_EN_TT1 (1 << 1) /* Enable target time 1. */
+#define TSAUXC_EN_CLK0 (1 << 2) /* Enable Configurable Frequency Clock 0. */
+#define TSAUXC_ST0 (1 << 4) /* Start Clock 0 Toggle on Target Time 0. */
+#define TSAUXC_EN_CLK1 (1 << 5) /* Enable Configurable Frequency Clock 1. */
+#define TSAUXC_ST1 (1 << 7) /* Start Clock 1 Toggle on Target Time 1. */
+#define TSAUXC_EN_TS0 (1 << 8) /* Enable hardware timestamp 0. */
+#define TSAUXC_EN_TS1 (1 << 10) /* Enable hardware timestamp 0. */
+
+/* SDP Configuration Bits */
+#define AUX0_SEL_SDP0 (0u << 0) /* Assign SDP0 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP1 (1u << 0) /* Assign SDP1 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP2 (2u << 0) /* Assign SDP2 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP3 (3u << 0) /* Assign SDP3 to auxiliary time stamp 0. */
+#define AUX0_TS_SDP_EN (1u << 2) /* Enable auxiliary time stamp trigger 0. */
+#define AUX1_SEL_SDP0 (0u << 3) /* Assign SDP0 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP1 (1u << 3) /* Assign SDP1 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP2 (2u << 3) /* Assign SDP2 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP3 (3u << 3) /* Assign SDP3 to auxiliary time stamp 1. */
+#define AUX1_TS_SDP_EN (1u << 5) /* Enable auxiliary time stamp trigger 1. */
+#define TS_SDP0_EN (1u << 8) /* SDP0 is assigned to Tsync. */
+#define TS_SDP1_EN (1u << 11) /* SDP1 is assigned to Tsync. */
+#define TS_SDP2_EN (1u << 14) /* SDP2 is assigned to Tsync. */
+#define TS_SDP3_EN (1u << 17) /* SDP3 is assigned to Tsync. */
+#define TS_SDP0_SEL_TT0 (0u << 6) /* Target time 0 is output on SDP0. */
+#define TS_SDP0_SEL_TT1 (1u << 6) /* Target time 1 is output on SDP0. */
+#define TS_SDP1_SEL_TT0 (0u << 9) /* Target time 0 is output on SDP1. */
+#define TS_SDP1_SEL_TT1 (1u << 9) /* Target time 1 is output on SDP1. */
+#define TS_SDP0_SEL_FC0 (2u << 6) /* Freq clock 0 is output on SDP0. */
+#define TS_SDP0_SEL_FC1 (3u << 6) /* Freq clock 1 is output on SDP0. */
+#define TS_SDP1_SEL_FC0 (2u << 9) /* Freq clock 0 is output on SDP1. */
+#define TS_SDP1_SEL_FC1 (3u << 9) /* Freq clock 1 is output on SDP1. */
+#define TS_SDP2_SEL_TT0 (0u << 12) /* Target time 0 is output on SDP2. */
+#define TS_SDP2_SEL_TT1 (1u << 12) /* Target time 1 is output on SDP2. */
+#define TS_SDP2_SEL_FC0 (2u << 12) /* Freq clock 0 is output on SDP2. */
+#define TS_SDP2_SEL_FC1 (3u << 12) /* Freq clock 1 is output on SDP2. */
+#define TS_SDP3_SEL_TT0 (0u << 15) /* Target time 0 is output on SDP3. */
+#define TS_SDP3_SEL_TT1 (1u << 15) /* Target time 1 is output on SDP3. */
+#define TS_SDP3_SEL_FC0 (2u << 15) /* Freq clock 0 is output on SDP3. */
+#define TS_SDP3_SEL_FC1 (3u << 15) /* Freq clock 1 is output on SDP3. */
+
+#define E1000_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */
+#define E1000_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */
+
/* ETQF register bit definitions */
#define E1000_ETQF_1588 (1 << 30)
#define E1000_FTQF_VF_BP 0x00008000
@@ -1415,6 +1496,8 @@
#define GG82563_PHY_INBAND_CTRL GG82563_REG(194, 18) /* Inband Ctrl */
/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_INT_EN 0x20000000
#define E1000_MDIC_REG_MASK 0x001F0000
#define E1000_MDIC_REG_SHIFT 16
#define E1000_MDIC_PHY_MASK 0x03E00000
@@ -1425,6 +1508,14 @@
#define E1000_MDIC_ERROR 0x40000000
#define E1000_MDIC_DEST 0x80000000
+#define E1000_N0_QUEUE -1
+
+#define E1000_MAX_MAC_HDR_LEN 127
+#define E1000_MAX_NETWORK_HDR_LEN 511
+
+#define E1000_VLANPQF_QSEL(_n, q_idx) ((q_idx) << ((_n) * 4))
+#define E1000_VLANPQF_VALID(_n) (0x1 << (3 + (_n) * 4))
+#define E1000_VLANPQF_QUEUE_MASK 0x03
#define E1000_VFTA_BLOCK_SIZE 8
/* SerDes Control */
#define E1000_GEN_CTL_READY 0x80000000
@@ -1562,6 +1653,21 @@
#define E1000_INVM_AUTOLOAD 0x0A
#define E1000_INVM_PLL_WO_VAL 0x0010
+/* Proxy Filter Control Extended */
+#define E1000_PROXYFCEX_MDNS 0x00000001 /* mDNS */
+#define E1000_PROXYFCEX_MDNS_M 0x00000002 /* mDNS Multicast */
+#define E1000_PROXYFCEX_MDNS_U 0x00000004 /* mDNS Unicast */
+#define E1000_PROXYFCEX_IPV4_M 0x00000008 /* IPv4 Multicast */
+#define E1000_PROXYFCEX_IPV6_M 0x00000010 /* IPv6 Multicast */
+#define E1000_PROXYFCEX_IGMP 0x00000020 /* IGMP */
+#define E1000_PROXYFCEX_IGMP_M 0x00000040 /* IGMP Multicast */
+#define E1000_PROXYFCEX_ARPRES 0x00000080 /* ARP Response */
+#define E1000_PROXYFCEX_ARPRES_D 0x00000100 /* ARP Response Directed */
+#define E1000_PROXYFCEX_ICMPV4 0x00000200 /* ICMPv4 */
+#define E1000_PROXYFCEX_ICMPV4_D 0x00000400 /* ICMPv4 Directed */
+#define E1000_PROXYFCEX_ICMPV6 0x00000800 /* ICMPv6 */
+#define E1000_PROXYFCEX_ICMPV6_D 0x00001000 /* ICMPv6 Directed */
+#define E1000_PROXYFCEX_DNS 0x00002000 /* DNS */
/* Proxy Filter Control */
#define E1000_PROXYFC_D0 0x00000001 /* Enable offload in D0 */
@@ -1572,6 +1678,7 @@
#define E1000_PROXYFC_IPV4 0x00000040 /* Directed IPv4 Enable */
#define E1000_PROXYFC_IPV6 0x00000080 /* Directed IPv6 Enable */
#define E1000_PROXYFC_NS 0x00000200 /* IPv6 Neighbor Solicitation */
+#define E1000_PROXYFC_NS_DIRECTED 0x00000400 /* Directed NS Proxy Ena */
#define E1000_PROXYFC_ARP 0x00000800 /* ARP Request Proxy Ena */
/* Proxy Status */
#define E1000_PROXYS_CLEAR 0xFFFFFFFF /* Clear */
diff --git a/drivers/net/intel/e1000/base/e1000_i225.h b/drivers/net/intel/e1000/base/e1000_i225.h
index d9e02383c3..a6fa2cfbe7 100644
--- a/drivers/net/intel/e1000/base/e1000_i225.h
+++ b/drivers/net/intel/e1000/base/e1000_i225.h
@@ -43,12 +43,71 @@ s32 e1000_set_eee_i225(struct e1000_hw *hw, bool adv2p5G, bool adv1G,
#define NVM_LED_1_CFG_DEFAULT_I225 0x0184
#define NVM_LED_0_2_CFG_DEFAULT_I225 0x200C
+#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002
+#define E1000_MRQC_ENABLE_VMDQ 0x00000003
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005
+#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
#define E1000_I225_SHADOW_RAM_SIZE 4096
#define E1000_I225_ERASE_CMD_OPCODE 0x02000000
#define E1000_I225_WRITE_CMD_OPCODE 0x01000000
#define E1000_FLSWCTL_DONE 0x40000000
#define E1000_FLSWCTL_CMDV 0x10000000
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
+#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000
+#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
+#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
+
+#define E1000_RXDADV_RSSTYPE_MASK 0x0000000F
+#define E1000_RXDADV_RSSTYPE_SHIFT 12
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+#define E1000_RXDADV_SPLITHEADER_EN 0x00001000
+#define E1000_RXDADV_SPH 0x8000
+#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */
+#define E1000_RXDADV_ERR_HBO 0x00800000
+
+/* RSS Hash results */
+#define E1000_RXDADV_RSSTYPE_NONE 0x00000000
+#define E1000_RXDADV_RSSTYPE_IPV4_TCP 0x00000001
+#define E1000_RXDADV_RSSTYPE_IPV4 0x00000002
+#define E1000_RXDADV_RSSTYPE_IPV6_TCP 0x00000003
+#define E1000_RXDADV_RSSTYPE_IPV6_EX 0x00000004
+#define E1000_RXDADV_RSSTYPE_IPV6 0x00000005
+#define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define E1000_RXDADV_RSSTYPE_IPV4_UDP 0x00000007
+#define E1000_RXDADV_RSSTYPE_IPV6_UDP 0x00000008
+#define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor */
+#define E1000_RXDADV_PKTTYPE_ILMASK 0x000000F0
+#define E1000_RXDADV_PKTTYPE_TLMASK 0x00000F00
+#define E1000_RXDADV_PKTTYPE_NONE 0x00000000
+#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */
+#define E1000_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPV4 hdr + extensions */
+#define E1000_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPV6 hdr present */
+#define E1000_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPV6 hdr + extensions */
+#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */
+#define E1000_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */
+#define E1000_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */
+#define E1000_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */
+
+#define E1000_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */
+#define E1000_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */
+#define E1000_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */
+#define E1000_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */
+#define E1000_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */
+#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */
+
/* LED Control */
#define E1000_GLOBAL_BLINK_MODE 0x00000020 /*Blink at 200 ms on and 200 ms off.*/
#define E1000_LED1_MODE_MASK 0x00000F00
diff --git a/drivers/net/intel/e1000/base/e1000_regs.h b/drivers/net/intel/e1000/base/e1000_regs.h
index 3a4779f80b..b30419d712 100644
--- a/drivers/net/intel/e1000/base/e1000_regs.h
+++ b/drivers/net/intel/e1000/base/e1000_regs.h
@@ -271,6 +271,8 @@
(0x054E0 + ((_i - 16) * 8)))
#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
(0x054E4 + ((_i - 16) * 8)))
+#define E1000_VLANPQF 0x055B0 /* VLAN Priority Queue Filter VLANPQF */
+
#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8))
#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8))
#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
@@ -492,6 +494,17 @@
#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_WUPM_EXT 0x0B800 /* Wakeup Packet Memory Extended - RO Array */
+#define E1000_WUFC_EXT 0x0580C /* Wakeup Filter Control Extended - RW */
+#define E1000_WUS_EXT 0x05814 /* Wakeup Status Extended - RW1C */
+#define E1000_FHFTSL 0x05804 /* Flex Filter Indirect Table Select - RW */
+#define E1000_PROXYFCEX 0x05590 /* Proxy Filter Control Extended - RW1C */
+#define E1000_PROXYEXS 0x05594 /* Proxy Extended Status - RO */
+#define E1000_WFUTPF 0x05500 /* Wake Flex UDP TCP Port Filter - RW Array */
+#define E1000_RFUTPF 0x05580 /* Range Flex UDP TCP Port Filter - RW */
+#define E1000_RWPFC 0x05584 /* Range Wake Port Filter Control - RW */
+#define E1000_WFUTPS 0x05588 /* Wake Filter UDP TCP Status - RW1C */
+#define E1000_WCS 0x0558C /* Wake Control Status - RW1C */
/* MSI-X Table Register Descriptions */
#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */
#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
@@ -603,6 +616,14 @@
#define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */
#define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */
+#define E1000_QBVCYCLET 0x331C
+#define E1000_QBVCYCLET_S 0x3320
+#define E1000_STQT(_n) (0x3324 + 0x4 * (_n))
+#define E1000_ENDQT(_n) (0x3334 + 0x4 * (_n))
+#define E1000_TXQCTL(_n) (0x3344 + 0x4 * (_n))
+#define E1000_BASET_L 0x3314
+#define E1000_BASET_H 0x3318
+
/* Filtering Registers */
#define E1000_SAQF(_n) (0x05980 + (4 * (_n))) /* Source Address Queue Fltr */
#define E1000_DAQF(_n) (0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */
@@ -701,4 +722,13 @@
#define E1000_LTRMINV 0x5BB0 /* LTR Minimum Value */
#define E1000_LTRMAXV 0x5BB4 /* LTR Maximum Value */
+/* IEEE 1588 TIMESYNCH */
+#define E1000_TRGTTIML0 0x0B644 /* Target Time Register 0 Low - RW */
+#define E1000_TRGTTIMH0 0x0B648 /* Target Time Register 0 High - RW */
+#define E1000_TRGTTIML1 0x0B64C /* Target Time Register 1 Low - RW */
+#define E1000_TRGTTIMH1 0x0B650 /* Target Time Register 1 High - RW */
+#define E1000_FREQOUT0 0x0B654 /* Frequency Out 0 Control Register - RW */
+#define E1000_FREQOUT1 0x0B658 /* Frequency Out 1 Control Register - RW */
+#define E1000_TSSDP 0x0003C /* Time Sync SDP Configuration Register - RW */
+
#endif
--
2.43.5
next prev parent reply other threads:[~2025-01-31 13:00 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-31 12:58 [PATCH v1 00/42] Merge Intel IGC and E1000 drivers, and update E1000 base code Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 01/42] net/e1000/base: fix semaphore timeout value Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 02/42] net/e1000/base: add initial support for i225 Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 03/42] net/e1000/base: add link bringup " Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 04/42] net/e1000/base: add LED blink " Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 05/42] net/e1000/base: add NVM/EEPROM " Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 06/42] net/e1000/base: add LTR support in i225 Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 07/42] net/e1000/base: add eee support for i225 Anatoly Burakov
2025-01-31 12:58 ` Anatoly Burakov [this message]
2025-01-31 12:58 ` [PATCH v1 09/42] net/e1000: merge igc with e1000 Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 10/42] net/e1000: add missing i225 devices Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 11/42] net/e1000: add missing hardware support Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 12/42] net/e1000: add support for more I219 devices Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 13/42] net/e1000/base: correct minor formatting issues Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 14/42] net/e1000/base: correct mPHY access logic Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 15/42] net/e1000/base: skip MANC check for 82575 Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 16/42] net/e1000/base: correct disable k1 logic Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 17/42] net/e1000/base: workaround for packet loss Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 18/42] net/e1000/base: add EEE common API function Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 19/42] net/e1000/base: add queue select definitions Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 20/42] net/e1000/base: add profile information field Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 21/42] net/e1000/base: add LPI counters Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 22/42] net/e1000/base: improve code flow in ICH8LAN Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 23/42] net/e1000/base: add definition for EXFWSM register Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 24/42] net/e1000/base: use longer ULP exit timeout on more HW Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 25/42] net/e1000/base: make e1000_access_phy_wakeup_reg_bm non-static Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 26/42] net/e1000/base: make debug prints more informative Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 27/42] net/e1000/base: add WoL definitions Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 28/42] net/e1000/base: hardcode bus parameters for ICH8 Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 29/42] net/e1000/base: improve NVM checksum handling Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 30/42] net/e1000/base: remove redundant access to RO register Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 31/42] net/e1000/base: remove non-inclusive language Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 32/42] net/e1000/base: introduce PHY ID retry mechanism Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 33/42] net/e1000/base: add PHY read/write " Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 34/42] net/e1000/base: fix iterator type Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 35/42] net/e1000/base: fix static analysis warnings Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 36/42] net/e1000/base: fix reset for 82580 Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 37/42] net/e1000/base: fix mac addr hash bit_shift Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 38/42] net/e1000/base: fix uninitialized variable usage Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 39/42] net/e1000/base: fix unchecked return Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 40/42] net/e1000/base: fix data type in MAC hash Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 41/42] net/e1000/base: rename NVM version variable Anatoly Burakov
2025-01-31 12:58 ` [PATCH v1 42/42] net/e1000/base: update readme Anatoly Burakov
2025-01-31 13:11 ` [PATCH v1 00/42] Merge Intel IGC and E1000 drivers, and update E1000 base code Bruce Richardson
2025-01-31 13:13 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b1913b91e4262d728cf24855d1c9c43d52a5bd41.1738328107.git.anatoly.burakov@intel.com \
--to=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).