From: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
To: dev@dpdk.org
Cc: konstantin.ananyev@intel.com, bernard.iremonger@intel.com,
akhil.goyal@nxp.com
Subject: [dpdk-dev] [PATCH v4 3/5] ipsec: add SAD add/delete/lookup implementation
Date: Tue, 8 Oct 2019 17:55:53 +0100 [thread overview]
Message-ID: <b8ccba6882a8ec902249ae5f3dde71320d131c48.1570553345.git.vladimir.medvedkin@intel.com> (raw)
In-Reply-To: <cover.1570553345.git.vladimir.medvedkin@intel.com>
In-Reply-To: <cover.1570553345.git.vladimir.medvedkin@intel.com>
Replace rte_ipsec_sad_add(), rte_ipsec_sad_del() and
rte_ipsec_sad_lookup() stubs with actual implementation.
It uses three librte_hash tables each of which contains
an entries for a specific SA type (either it is addressed by SPI only
or SPI+DIP or SPI+DIP+SIP)
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
lib/librte_ipsec/ipsec_sad.c | 278 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 266 insertions(+), 12 deletions(-)
diff --git a/lib/librte_ipsec/ipsec_sad.c b/lib/librte_ipsec/ipsec_sad.c
index 1a26cff..4465a4e 100644
--- a/lib/librte_ipsec/ipsec_sad.c
+++ b/lib/librte_ipsec/ipsec_sad.c
@@ -49,20 +49,182 @@ static struct rte_tailq_elem rte_ipsec_sad_tailq = {
};
EAL_REGISTER_TAILQ(rte_ipsec_sad_tailq)
+#define SET_BIT(ptr, bit) (void *)((uintptr_t)(ptr) | (uintptr_t)(bit))
+#define CLEAR_BIT(ptr, bit) (void *)((uintptr_t)(ptr) & ~(uintptr_t)(bit))
+#define GET_BIT(ptr, bit) (void *)((uintptr_t)(ptr) & (uintptr_t)(bit))
+
+/*
+ * @internal helper function
+ * Add a rule of type SPI_DIP or SPI_DIP_SIP.
+ * Inserts a rule into an appropriate hash table,
+ * updates the value for a given SPI in SPI_ONLY hash table
+ * reflecting presence of more specific rule type in two LSBs.
+ * Updates a counter that reflects the number of rules whith the same SPI.
+ */
+static inline int
+add_specific(struct rte_ipsec_sad *sad, const void *key,
+ int key_type, void *sa)
+{
+ void *tmp_val;
+ int ret, notexist;
+
+ /* Check if the key is present in the table.
+ * Need for further accaunting in cnt_arr
+ */
+ ret = rte_hash_lookup(sad->hash[key_type], key);
+ notexist = (ret == -ENOENT);
+
+ /* Add an SA to the corresponding table.*/
+ ret = rte_hash_add_key_data(sad->hash[key_type], key, sa);
+ if (ret != 0)
+ return ret;
+
+ /* Check if there is an entry in SPI only table with the same SPI */
+ ret = rte_hash_lookup_data(sad->hash[RTE_IPSEC_SAD_SPI_ONLY],
+ key, &tmp_val);
+ if (ret < 0)
+ tmp_val = NULL;
+ tmp_val = SET_BIT(tmp_val, key_type);
+
+ /* Add an entry into SPI only table */
+ ret = rte_hash_add_key_data(sad->hash[RTE_IPSEC_SAD_SPI_ONLY],
+ key, tmp_val);
+ if (ret != 0)
+ return ret;
+
+ /* Update a counter for a given SPI */
+ ret = rte_hash_lookup(sad->hash[RTE_IPSEC_SAD_SPI_ONLY], key);
+ if (key_type == RTE_IPSEC_SAD_SPI_DIP)
+ sad->cnt_arr[ret].cnt_dip += notexist;
+ else
+ sad->cnt_arr[ret].cnt_dip_sip += notexist;
+
+ return 0;
+}
+
int
-rte_ipsec_sad_add(__rte_unused struct rte_ipsec_sad *sad,
- __rte_unused const union rte_ipsec_sad_key *key,
- __rte_unused int key_type, __rte_unused void *sa)
+rte_ipsec_sad_add(struct rte_ipsec_sad *sad,
+ const union rte_ipsec_sad_key *key,
+ int key_type, void *sa)
{
- return -ENOTSUP;
+ void *tmp_val;
+ int ret;
+
+ if ((sad == NULL) || (key == NULL) || (sa == NULL) ||
+ /* sa must be 4 byte aligned */
+ (GET_BIT(sa, RTE_IPSEC_SAD_KEY_TYPE_MASK) != 0))
+ return -EINVAL;
+
+ /*
+ * Rules are stored in three hash tables depending on key_type.
+ * All rules will also have an entry in SPI_ONLY table, with entry
+ * value's two LSB's also indicating presence of rule with this SPI
+ * in other tables.
+ */
+ switch (key_type) {
+ case(RTE_IPSEC_SAD_SPI_ONLY):
+ ret = rte_hash_lookup_data(sad->hash[key_type],
+ key, &tmp_val);
+ if (ret >= 0)
+ tmp_val = SET_BIT(sa, GET_BIT(tmp_val,
+ RTE_IPSEC_SAD_KEY_TYPE_MASK));
+ else
+ tmp_val = sa;
+ ret = rte_hash_add_key_data(sad->hash[key_type],
+ key, tmp_val);
+ return ret;
+ case(RTE_IPSEC_SAD_SPI_DIP):
+ case(RTE_IPSEC_SAD_SPI_DIP_SIP):
+ return add_specific(sad, key, key_type, sa);
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * @internal helper function
+ * Delete a rule of type SPI_DIP or SPI_DIP_SIP.
+ * Deletes an entry from an appropriate hash table and decrements
+ * an entry counter for given SPI.
+ * If entry to remove is the last one with given SPI within the table,
+ * then it will also update related entry in SPI_ONLY table.
+ * Removes an entry from SPI_ONLY hash table if there no rule left
+ * for this SPI in any table.
+ */
+static inline int
+del_specific(struct rte_ipsec_sad *sad, const void *key, int key_type)
+{
+ void *tmp_val;
+ int ret;
+ uint32_t *cnt;
+
+ /* Remove an SA from the corresponding table.*/
+ ret = rte_hash_del_key(sad->hash[key_type], key);
+ if (ret < 0)
+ return ret;
+
+ /* Get an index of cnt_arr entry for a given SPI */
+ ret = rte_hash_lookup_data(sad->hash[RTE_IPSEC_SAD_SPI_ONLY],
+ key, &tmp_val);
+ if (ret < 0)
+ return ret;
+ cnt = (key_type == RTE_IPSEC_SAD_SPI_DIP) ?
+ &sad->cnt_arr[ret].cnt_dip :
+ &sad->cnt_arr[ret].cnt_dip_sip;
+ if (--(*cnt) != 0)
+ return 0;
+
+ /* corresponding counter is 0, clear the bit indicating
+ * the presence of more specific rule for a given SPI.
+ */
+ tmp_val = CLEAR_BIT(tmp_val, key_type);
+
+ /* if there are no rules left with same SPI,
+ * remove an entry from SPI_only table
+ */
+ if (tmp_val == NULL)
+ ret = rte_hash_del_key(sad->hash[RTE_IPSEC_SAD_SPI_ONLY], key);
+ else
+ ret = rte_hash_add_key_data(sad->hash[RTE_IPSEC_SAD_SPI_ONLY],
+ key, tmp_val);
+ if (ret < 0)
+ return ret;
+ return 0;
}
int
-rte_ipsec_sad_del(__rte_unused struct rte_ipsec_sad *sad,
- __rte_unused const union rte_ipsec_sad_key *key,
- __rte_unused int key_type)
+rte_ipsec_sad_del(struct rte_ipsec_sad *sad,
+ const union rte_ipsec_sad_key *key,
+ int key_type)
{
- return -ENOTSUP;
+ void *tmp_val;
+ int ret;
+
+ if ((sad == NULL) || (key == NULL))
+ return -EINVAL;
+ switch (key_type) {
+ case(RTE_IPSEC_SAD_SPI_ONLY):
+ ret = rte_hash_lookup_data(sad->hash[key_type],
+ key, &tmp_val);
+ if (ret < 0)
+ return ret;
+ if (GET_BIT(tmp_val, RTE_IPSEC_SAD_KEY_TYPE_MASK) == 0) {
+ ret = rte_hash_del_key(sad->hash[key_type],
+ key);
+ ret = ret < 0 ? ret : 0;
+ } else {
+ tmp_val = GET_BIT(tmp_val,
+ RTE_IPSEC_SAD_KEY_TYPE_MASK);
+ ret = rte_hash_add_key_data(sad->hash[key_type],
+ key, tmp_val);
+ }
+ return ret;
+ case(RTE_IPSEC_SAD_SPI_DIP):
+ case(RTE_IPSEC_SAD_SPI_DIP_SIP):
+ return del_specific(sad, key, key_type);
+ default:
+ return -EINVAL;
+ }
}
struct rte_ipsec_sad *
@@ -252,10 +414,102 @@ rte_ipsec_sad_destroy(struct rte_ipsec_sad *sad)
rte_free(te);
}
+/*
+ * @internal helper function
+ * Lookup a batch of keys in three hash tables.
+ * First lookup key in SPI_ONLY table.
+ * If there is an entry for the corresponding SPI check its value.
+ * Two least significant bits of the value indicate
+ * the presence of more specific rule in other tables.
+ * Perform additional lookup in corresponding hash tables
+ * and update the value if lookup succeeded.
+ */
+static int
+__ipsec_sad_lookup(const struct rte_ipsec_sad *sad,
+ const union rte_ipsec_sad_key *keys[], void *sa[], uint32_t n)
+{
+ const void *keys_2[RTE_HASH_LOOKUP_BULK_MAX];
+ const void *keys_3[RTE_HASH_LOOKUP_BULK_MAX];
+ void *vals_2[RTE_HASH_LOOKUP_BULK_MAX] = {NULL};
+ void *vals_3[RTE_HASH_LOOKUP_BULK_MAX] = {NULL};
+ uint32_t idx_2[RTE_HASH_LOOKUP_BULK_MAX];
+ uint32_t idx_3[RTE_HASH_LOOKUP_BULK_MAX];
+ uint64_t mask_1, mask_2, mask_3;
+ uint64_t map, map_spec;
+ uint32_t n_2 = 0;
+ uint32_t n_3 = 0;
+ uint32_t i;
+ int found = 0;
+
+ for (i = 0; i < n; i++)
+ sa[i] = NULL;
+
+ /*
+ * Lookup keys in SPI only hash table first.
+ */
+ rte_hash_lookup_bulk_data(sad->hash[RTE_IPSEC_SAD_SPI_ONLY],
+ (const void **)keys, n, &mask_1, sa);
+ for (map = mask_1; map; map &= (map - 1)) {
+ i = rte_bsf64(map);
+ /*
+ * if returned value indicates presence of a rule in other
+ * tables save a key for further lookup.
+ */
+ if ((uintptr_t)sa[i] & RTE_IPSEC_SAD_SPI_DIP_SIP) {
+ idx_3[n_3] = i;
+ keys_3[n_3++] = keys[i];
+ }
+ if ((uintptr_t)sa[i] & RTE_IPSEC_SAD_SPI_DIP) {
+ idx_2[n_2] = i;
+ keys_2[n_2++] = keys[i];
+ }
+ /* clear 2 LSB's which indicate the presence
+ * of more specific rules
+ */
+ sa[i] = CLEAR_BIT(sa[i], RTE_IPSEC_SAD_KEY_TYPE_MASK);
+ }
+
+ /* Lookup for more specific rules in SPI_DIP table */
+ if (n_2 != 0) {
+ rte_hash_lookup_bulk_data(sad->hash[RTE_IPSEC_SAD_SPI_DIP],
+ keys_2, n_2, &mask_2, vals_2);
+ for (map_spec = mask_2; map_spec; map_spec &= (map_spec - 1)) {
+ i = rte_bsf64(map_spec);
+ sa[idx_2[i]] = vals_2[i];
+ }
+ }
+ /* Lookup for more specific rules in SPI_DIP_SIP table */
+ if (n_3 != 0) {
+ rte_hash_lookup_bulk_data(sad->hash[RTE_IPSEC_SAD_SPI_DIP_SIP],
+ keys_3, n_3, &mask_3, vals_3);
+ for (map_spec = mask_3; map_spec; map_spec &= (map_spec - 1)) {
+ i = rte_bsf64(map_spec);
+ sa[idx_3[i]] = vals_3[i];
+ }
+ }
+
+ for (i = 0; i < n; i++)
+ found += (sa[i] != NULL);
+
+ return found;
+}
+
int
-rte_ipsec_sad_lookup(__rte_unused const struct rte_ipsec_sad *sad,
- __rte_unused const union rte_ipsec_sad_key *keys[],
- __rte_unused void *sa[], __rte_unused uint32_t n)
+rte_ipsec_sad_lookup(const struct rte_ipsec_sad *sad,
+ const union rte_ipsec_sad_key *keys[], void *sa[], uint32_t n)
{
- return -ENOTSUP;
+ uint32_t num, i = 0;
+ int found = 0;
+
+ if (unlikely((sad == NULL) || (keys == NULL) || (sa == NULL)))
+ return -EINVAL;
+
+ do {
+ num = RTE_MIN(n - i, (uint32_t)RTE_HASH_LOOKUP_BULK_MAX);
+ found += __ipsec_sad_lookup(sad,
+ &keys[i], &sa[i], num);
+ i += num;
+ } while (i != n);
+
+ return found;
}
--
2.7.4
next prev parent reply other threads:[~2019-10-08 16:56 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 15:13 [dpdk-dev] [RFC 0/5] ipsec: add inbound SAD Vladimir Medvedkin
2019-08-13 15:13 ` [dpdk-dev] [RFC 1/5] ipsec: add inbound SAD API Vladimir Medvedkin
2019-08-13 15:13 ` [dpdk-dev] [RFC 2/5] ipsec: add SAD create/free API Vladimir Medvedkin
2019-08-13 15:13 ` [dpdk-dev] [RFC 3/5] ipsec: add SAD add/delete/lookup implementation Vladimir Medvedkin
2019-08-13 15:13 ` [dpdk-dev] [RFC 4/5] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-08-13 15:13 ` [dpdk-dev] [RFC 5/5] app: add test-sad application Vladimir Medvedkin
2019-09-03 16:55 ` [dpdk-dev] [PATCH v1 0/5] ipsec: add inbound SAD Vladimir Medvedkin
2019-10-01 17:25 ` [dpdk-dev] [PATCH v2 " Vladimir Medvedkin
2019-10-08 9:40 ` [dpdk-dev] [PATCH v3 " Vladimir Medvedkin
2019-10-08 16:55 ` [dpdk-dev] [PATCH v4 " Vladimir Medvedkin
2019-10-10 16:49 ` [dpdk-dev] [PATCH v5 " Vladimir Medvedkin
2019-10-11 11:34 ` Akhil Goyal
2019-10-17 15:47 ` [dpdk-dev] [PATCH v6 0/6] " Vladimir Medvedkin
2019-10-21 14:35 ` [dpdk-dev] [PATCH v7 0/5] " Vladimir Medvedkin
2019-10-22 7:53 ` Akhil Goyal
2019-10-21 14:35 ` [dpdk-dev] [PATCH v7 1/5] ipsec: add inbound SAD API Vladimir Medvedkin
2019-10-21 14:35 ` [dpdk-dev] [PATCH v7 2/5] ipsec: add SAD create/destroy implementation Vladimir Medvedkin
2019-10-21 14:35 ` [dpdk-dev] [PATCH v7 3/5] ipsec: add SAD add/delete/lookup implementation Vladimir Medvedkin
2019-10-21 14:35 ` [dpdk-dev] [PATCH v7 4/5] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-10-21 14:35 ` [dpdk-dev] [PATCH v7 5/5] app: add test-sad application Vladimir Medvedkin
2019-10-17 15:47 ` [dpdk-dev] [PATCH v6 1/6] ipsec: add inbound SAD API Vladimir Medvedkin
2019-10-17 15:47 ` [dpdk-dev] [PATCH v6 2/6] ipsec: add SAD create/destroy implementation Vladimir Medvedkin
2019-10-17 15:48 ` [dpdk-dev] [PATCH v6 3/6] ipsec: add SAD add/delete/lookup implementation Vladimir Medvedkin
2019-10-17 15:48 ` [dpdk-dev] [PATCH v6 4/6] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-10-17 15:48 ` [dpdk-dev] [PATCH v6 5/6] app: add test-sad application Vladimir Medvedkin
2019-10-21 9:57 ` Akhil Goyal
2019-10-17 15:48 ` [dpdk-dev] [PATCH v6 6/6] doc/ipsec: update ipsec programmer's guide Vladimir Medvedkin
2019-10-18 10:09 ` Ananyev, Konstantin
2019-10-21 8:19 ` Akhil Goyal
2019-10-10 16:49 ` [dpdk-dev] [PATCH v5 1/5] ipsec: add inbound SAD API Vladimir Medvedkin
2019-10-10 16:49 ` [dpdk-dev] [PATCH v5 2/5] ipsec: add SAD create/destroy implementation Vladimir Medvedkin
2019-10-10 16:49 ` [dpdk-dev] [PATCH v5 3/5] ipsec: add SAD add/delete/lookup implementation Vladimir Medvedkin
2019-10-11 10:42 ` Akhil Goyal
2019-10-10 16:49 ` [dpdk-dev] [PATCH v5 4/5] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-10-10 16:49 ` [dpdk-dev] [PATCH v5 5/5] app: add test-sad application Vladimir Medvedkin
2019-10-08 16:55 ` [dpdk-dev] [PATCH v4 1/5] ipsec: add inbound SAD API Vladimir Medvedkin
2019-10-09 10:49 ` Ananyev, Konstantin
2019-10-08 16:55 ` [dpdk-dev] [PATCH v4 2/5] ipsec: add SAD create/destroy implementation Vladimir Medvedkin
2019-10-09 10:56 ` Ananyev, Konstantin
2019-10-08 16:55 ` Vladimir Medvedkin [this message]
2019-10-08 16:55 ` [dpdk-dev] [PATCH v4 4/5] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-10-08 16:55 ` [dpdk-dev] [PATCH v4 5/5] app: add test-sad application Vladimir Medvedkin
2019-10-08 9:40 ` [dpdk-dev] [PATCH v3 1/5] ipsec: add inbound SAD API Vladimir Medvedkin
2019-10-08 9:40 ` [dpdk-dev] [PATCH v3 2/5] ipsec: add SAD create/destroy implementation Vladimir Medvedkin
2019-10-08 9:40 ` [dpdk-dev] [PATCH v3 3/5] ipsec: add SAD add/delete/lookup implementation Vladimir Medvedkin
2019-10-08 9:40 ` [dpdk-dev] [PATCH v3 4/5] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-10-08 9:40 ` [dpdk-dev] [PATCH v3 5/5] app: add test-sad application Vladimir Medvedkin
2019-10-01 17:25 ` [dpdk-dev] [PATCH v2 1/5] ipsec: add inbound SAD API Vladimir Medvedkin
2019-10-02 11:24 ` Ananyev, Konstantin
2019-10-01 17:25 ` [dpdk-dev] [PATCH v2 2/5] ipsec: add SAD create/destroy implementation Vladimir Medvedkin
2019-10-02 11:55 ` Ananyev, Konstantin
2019-10-01 17:25 ` [dpdk-dev] [PATCH v2 3/5] ipsec: add SAD add/delete/lookup implementation Vladimir Medvedkin
2019-10-02 12:04 ` Ananyev, Konstantin
2019-10-01 17:25 ` [dpdk-dev] [PATCH v2 4/5] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-10-02 11:16 ` Ananyev, Konstantin
2019-10-01 17:25 ` [dpdk-dev] [PATCH v2 5/5] app: add test-sad application Vladimir Medvedkin
2019-10-02 13:27 ` Ananyev, Konstantin
2019-09-03 16:55 ` [dpdk-dev] [PATCH v1 1/5] ipsec: add inbound SAD API Vladimir Medvedkin
2019-09-14 23:05 ` Ananyev, Konstantin
2019-09-03 16:55 ` [dpdk-dev] [PATCH v1 2/5] ipsec: add SAD create/free API Vladimir Medvedkin
2019-09-12 18:08 ` Ananyev, Konstantin
2019-09-03 16:55 ` [dpdk-dev] [PATCH v1 3/5] ipsec: add SAD add/delete/lookup implementation Vladimir Medvedkin
2019-09-12 17:58 ` Ananyev, Konstantin
2019-10-01 17:24 ` Medvedkin, Vladimir
2019-09-03 16:55 ` [dpdk-dev] [PATCH v1 4/5] test/ipsec: add ipsec SAD autotests Vladimir Medvedkin
2019-09-03 16:55 ` [dpdk-dev] [PATCH v1 5/5] app: add test-sad application Vladimir Medvedkin
2019-09-12 18:30 ` Ananyev, Konstantin
2019-09-12 18:33 ` Ananyev, Konstantin
2019-09-12 18:34 ` [dpdk-dev] [RFC 0/5] ipsec: add inbound SAD Ananyev, Konstantin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8ccba6882a8ec902249ae5f3dde71320d131c48.1570553345.git.vladimir.medvedkin@intel.com \
--to=vladimir.medvedkin@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).