* [Bug 1210] ice: 'eth / ipv4 / udp dst is 4500 / mark' rte_flow not marking any packet
@ 2023-04-05 14:23 bugzilla
2023-07-24 2:41 ` bugzilla
0 siblings, 1 reply; 2+ messages in thread
From: bugzilla @ 2023-04-05 14:23 UTC (permalink / raw)
To: dev
[-- Attachment #1: Type: text/plain, Size: 5632 bytes --]
https://bugs.dpdk.org/show_bug.cgi?id=1210
Bug ID: 1210
Summary: ice: 'eth / ipv4 / udp dst is 4500 / mark' rte_flow
not marking any packet
Product: DPDK
Version: 22.11
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: ethdev
Assignee: dev@dpdk.org
Reporter: maxime.leroy@6wind.com
Target Milestone: ---
Environnement
-------------
distribution for host/vm: Ubuntu 22.04.2 LTS, kernel 5.15.0-67-generic
kernel driver: 1.10.1.2.2
firmware-version: 4.20 0x8001778a 1.3346.0
COMMS DDP: 1.3.37
ICE OS Default Package version 1.3.30.0
testpmd cmdline: ./build/app/dpdk-testpmd --log-level=.*ice.*,debug
--legacy-mem -c 0x1110001110 -a 0000:17:00.0 -a 0000:17:00.1 -- -i
--nb-cores=5 --nb-ports=2 --total-num-mbufs=16384 --rxq=4 --txq=4
dpdk version: 22.11.1
NIC: Intel Corporation Ethernet Controller E810-C for QSFP
Reproduction
------------
Configuration
.............
On dut device, test-pmd configuration:
testpmd> set fwd rxonly
Set rxonly packet forwarding mode
testpmd> set verbose 1
Change verbose level from 0 to
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 4500 / end
actions mark id 4 / end
ice_fdir_cur_prof_conflict(): Profile already exists for flow type 1.
ice_fdir_rx_parsing_enable(): FDIR processing on RX set to 1
ice_flow_create(): Succeeded to create (1) flow
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 42 / end
actions mark id 4 / end
ice_fdir_cur_prof_conflict(): Profile already exists for flow type 1.
ice_fdir_rx_parsing_enable(): FDIR processing on RX set to 1
ice_flow_create(): Succeeded to create (1) flow
Flow rule #1 created
testpmd> start
Test with dport=42
..................
On tester device:
$ cat port-42.scapy
port = 42
p = []
p += Ether(src='b8:ce:f6:83:b3:13',
dst='40:a6:b7:7d:43:90')/IP(dst='10.100.0.2', src='10.100.0.1')/UDP(dport=port,
sport=port)
sendp(p, iface="eth0", count=3, inter=0.1)
$ scapy < port-42.scapy
Welcome to Scapy (2.3.3.dev1)
...>>> >>> >>> >>> >>>
Sent 3 packets
Result on dut device:
testpmd> port 0/queue 2: received 1 packets
src=B8:CE:F6:83:B3:13 - dst=40:A6:B7:7D:43:90 - pool=mb_pool_0 - type=0x0800
- length=60 - nb_segs=1 - RSS hash=0x63245812 - RSS queue=0x2 - FDIR matched
ID=0x4 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER
L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x2
ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_FDIR
RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_FDIR_ID
RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
port 0/queue 2: received 1 packets
src=B8:CE:F6:83:B3:13 - dst=40:A6:B7:7D:43:90 - pool=mb_pool_0 - type=0x0800
- length=60 - nb_segs=1 - RSS hash=0x63245812 - RSS queue=0x2 - FDIR matched
ID=0x4 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER
L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x2
ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_FDIR
RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_FDIR_ID
RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
port 0/queue 2: received 1 packets
src=B8:CE:F6:83:B3:13 - dst=40:A6:B7:7D:43:90 - pool=mb_pool_0 - type=0x0800
- length=60 - nb_segs=1 - RSS hash=0x63245812 - RSS queue=0x2 - FDIR matched
ID=0x4 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER
L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x2
ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_FDIR
RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_FDIR_ID
RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
Packet is MARKED ! (excepted result)
Test with dport=4500
....................
On tester device:
$ cat port-4500.scapy
port = 4500
p = []
p += Ether(src='b8:ce:f6:83:b3:13',
dst='40:a6:b7:7d:43:90')/IP(dst='10.100.0.2', src='10.100.0.1')/UDP(dport=port,
sport=port)
sendp(p, iface="eth0", count=3, inter=0.1)
$ scapy < port-4500.scapy
Welcome to Scapy (2.3.3.dev1)
...>>> >>> >>> >>> >>>
Sent 3 packets
Result on dut device:
testpmd> port 0/queue 3: received 1 packets
src=B8:CE:F6:83:B3:13 - dst=40:A6:B7:7D:43:90 - pool=mb_pool_0 - type=0x0800
- length=60 - nb_segs=1 - RSS hash=0x749278c7 - RSS queue=0x3 - sw ptype:
L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x3
ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
port 0/queue 3: received 1 packets
src=B8:CE:F6:83:B3:13 - dst=40:A6:B7:7D:43:90 - pool=mb_pool_0 - type=0x0800
- length=60 - nb_segs=1 - RSS hash=0x749278c7 - RSS queue=0x3 - sw ptype:
L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x3
ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
port 0/queue 3: received 1 packets
src=B8:CE:F6:83:B3:13 - dst=40:A6:B7:7D:43:90 - pool=mb_pool_0 - type=0x0800
- length=60 - nb_segs=1 - RSS hash=0x749278c7 - RSS queue=0x3 - sw ptype:
L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x3
ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
packet is NOT MARKED ! (not excepted result, bug)
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #2: Type: text/html, Size: 7650 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Bug 1210] ice: 'eth / ipv4 / udp dst is 4500 / mark' rte_flow not marking any packet
2023-04-05 14:23 [Bug 1210] ice: 'eth / ipv4 / udp dst is 4500 / mark' rte_flow not marking any packet bugzilla
@ 2023-07-24 2:41 ` bugzilla
0 siblings, 0 replies; 2+ messages in thread
From: bugzilla @ 2023-07-24 2:41 UTC (permalink / raw)
To: dev
[-- Attachment #1: Type: text/plain, Size: 543 bytes --]
https://bugs.dpdk.org/show_bug.cgi?id=1210
Zhichao Zeng (zhichaox.zeng@intel.com) changed:
What |Removed |Added
----------------------------------------------------------------------------
Resolution|--- |WONTFIX
Status|UNCONFIRMED |RESOLVED
--- Comment #2 from Zhichao Zeng (zhichaox.zeng@intel.com) ---
No new comments for two weeks, close this ticket.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #2: Type: text/html, Size: 2633 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-07-24 2:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-04-05 14:23 [Bug 1210] ice: 'eth / ipv4 / udp dst is 4500 / mark' rte_flow not marking any packet bugzilla
2023-07-24 2:41 ` bugzilla
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).