https://bugs.dpdk.org/show_bug.cgi?id=1566 Bug ID: 1566 Summary: On Windows, some netuio-bound device can not be used on Windows if at least one device is using Intel ice drivers Product: DPDK Version: 23.11 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: Normal Component: ethdev Assignee: dev@dpdk.org Reporter: e.houet@deltacast.tv Target Milestone: --- I have a Windows set-up on which I have one Intel XXV710 (2 x 25G port) and one Intel E810 (2 x 100G port). When using DPDK v23.11.2, if I bind the 4 NIC to netuio, when running dpdk-testpmp, I have the following : > PS C:\dpdk-23112\bin> .\dpdk-testpmd.exe > EAL: Detected CPU lcores: 48 > EAL: Detected NUMA nodes: 2 > EAL: Multi-process support is requested, but not available. > EAL: Probe PCI driver: mlx5_pci (15b3:1015) device: 0000:18:00.0 (socket 0) > mlx5_common: Cannot list devices, is DevX enabled? > mlx5_common: Failed to allocate PD Obj using DevX. > mlx5_common: Failed to initialize device context. > EAL: Requested device 0000:18:00.0 cannot be used > EAL: Probe PCI driver: mlx5_pci (15b3:1015) device: 0000:18:00.1 (socket 0) > mlx5_common: Cannot list devices, is DevX enabled? > mlx5_common: Failed to allocate PD Obj using DevX. > mlx5_common: Failed to initialize device context. > EAL: Requested device 0000:18:00.1 cannot be used > EAL: Probe PCI driver: net_ice (8086:1592) device: 0000:5e:00.0 (socket 0) > ice_dev_init(): Failed to read device serial number > > ice_load_pkg_type(): Active package is: 1.3.36.0, ICE OS Default Package > (double VLAN mode) > EAL: Probe PCI driver: net_ice (8086:1592) device: 0000:5e:00.1 (socket 0) > ice_dev_init(): Failed to initialize HW > EAL: Requested device 0000:5e:00.1 cannot be used > EAL: Probe PCI driver: net_i40e (8086:158b) device: 0000:af:00.0 (socket 1) > i40e_enable_extended_tag(): Does not support Extended Tag > EAL: Probe PCI driver: net_i40e (8086:158b) device: 0000:af:00.1 (socket 1) > i40e_enable_extended_tag(): Does not support Extended Tag > eth_i40e_dev_init(): mac address is not valid > ethdev initialisation failed > EAL: Requested device 0000:af:00.1 cannot be used Logs show : > EAL: Requested device 0000:5e:00.1 cannot be used > ... > EAL: Requested device 0000:af:00.1 cannot be used ------------------------------------------------------------ I tried the following : - Only one i40e NIC bound to netuio : OK - Only one ice NIC bound to netuio : OK - Two i40e NIC bound to netuio : OK - Two ice NIC bound to netuio : Second NIC can not be used - one ice NIC and two i40e NIC bound to netuio : Second i40e NIC can not be used - two ice NIC and two e40e NIC bound to netuio (as above) : second i40e and second ice NIC can not be used ------------------------------------------------------------ When using v24.07, the problem is not present : > PS C:\dpdk-2407\bin> .\dpdk-testpmd.exe > EAL: Detected CPU lcores: 48 > EAL: Detected NUMA nodes: 2 > EAL: Multi-process support is requested, but not available. > mlx5_common: Cannot list devices, is DevX enabled? > mlx5_common: Failed to allocate PD Obj using DevX. > mlx5_common: Failed to initialize device context. > PCI_BUS: Requested device 0000:18:00.0 cannot be used > mlx5_common: Cannot list devices, is DevX enabled? > mlx5_common: Failed to allocate PD Obj using DevX. > mlx5_common: Failed to initialize device context. > PCI_BUS: Requested device 0000:18:00.1 cannot be used > ice_flow_init(): Failed to initialize DDP parser, raw packet filter will not > be supported > ice_flow_init(): Failed to initialize DDP parser, raw packet filter will not > be supported > i40e_enable_extended_tag(): Does not support Extended Tag > i40e_enable_extended_tag(): Does not support Extended Tag No message regarding "NIC can not be used is present". Any plan on fixing this behavior in 23.11? Best regards, Eric Houet -- You are receiving this mail because: You are the assignee for the bug.