https://bugs.dpdk.org/show_bug.cgi?id=1789 Bug ID: 1789 Summary: vmxnet3_dev_start fails in vmxnet3_v4_rss_configure() for single queue in ESX8.0 causing application to exit Product: DPDK Version: 19.11 Hardware: All OS: All Status: UNCONFIRMED Severity: normal Priority: Normal Component: ethdev Assignee: dev@dpdk.org Reporter: amiyaranjan.mohakud@gmail.com Target Milestone: --- DPDK Version: 19.11 ESX version: ESX8.0 We faced an exact similar issue as mentioned in https://mails.dpdk.org/archives/users/2025-April/008236.html. Context Details: ----------------- In ESXi 8.0 setup with dpdk-19.11, when the HW compatibility version is ESX8.0 and with single queue pair configuration, the RSS gets enabled. As a result, vmxnet3_v4_rss_configure() gets called and fails while writing/reading from BAR1 hw register. It looks to be some compatibility issue with dpdk-19.11 and ESX8.0. if (VMXNET3_VERSION_GE_4(hw) && dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_RSS) { /* Check for additional RSS */ ret = vmxnet3_v4_rss_configure(dev); if (ret != VMXNET3_SUCCESS) { PMD_INIT_LOG(ERR, "Failed to configure v4 RSS"); return ret; } } As a result, it causes the application to exit. Proposed fix: I have a plausible fix for this. The fix is to disable RSS for such a case ( the fix should go only in 19.11). During dev_configure(), we can set the mq_mode to ETH_MQ_RX_NONE if the num_rx_queues is 1. This would avoid calling of vmxnet3_v4_rss_configure(). /* Disabling RSS for single queue pair */ if (dev->data->nb_rx_queues == 1) { dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE; PMD_INIT_LOG(ERR, "WARN: Disabling RSS for single Rx queue"); } Pls verify and let me know if it can be upstreamed. Once confirmed/approved, If required, I can generate a main stream patch for it. -- You are receiving this mail because: You are the assignee for the bug.