From: Hemant Agrawal <hemant.agrawal@oss.nxp.com>
To: Jiawen Wu <jiawenwu@trustnetic.com>,
dev@dpdk.org, "gakhil@marvell.com" <gakhil@marvell.com>
Subject: Re: [dpdk-dev] [PATCH 28/32] net/ngbe: add IPsec context creation
Date: Thu, 16 Sep 2021 14:34:48 +0530 [thread overview]
Message-ID: <c651c92e-5020-14f0-80b1-3073637af4bb@oss.nxp.com> (raw)
In-Reply-To: <20210908083758.312055-29-jiawenwu@trustnetic.com>
On 9/8/2021 2:07 PM, Jiawen Wu wrote:
> Initialize securiry context, and support to get security
> capabilities.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
> ---
> doc/guides/nics/features/ngbe.ini | 1 +
> drivers/net/ngbe/meson.build | 3 +-
> drivers/net/ngbe/ngbe_ethdev.c | 10 ++
> drivers/net/ngbe/ngbe_ethdev.h | 4 +
> drivers/net/ngbe/ngbe_ipsec.c | 178 ++++++++++++++++++++++++++++++
> 5 files changed, 195 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/ngbe/ngbe_ipsec.c
>
> diff --git a/doc/guides/nics/features/ngbe.ini b/doc/guides/nics/features/ngbe.ini
> index 56d5d71ea8..facdb5f006 100644
> --- a/doc/guides/nics/features/ngbe.ini
> +++ b/doc/guides/nics/features/ngbe.ini
> @@ -23,6 +23,7 @@ RSS reta update = Y
> SR-IOV = Y
> VLAN filter = Y
> Flow control = Y
> +Inline crypto = Y
> CRC offload = P
> VLAN offload = P
> QinQ offload = P
> diff --git a/drivers/net/ngbe/meson.build b/drivers/net/ngbe/meson.build
> index b276ec3341..f222595b19 100644
> --- a/drivers/net/ngbe/meson.build
> +++ b/drivers/net/ngbe/meson.build
> @@ -12,12 +12,13 @@ objs = [base_objs]
>
> sources = files(
> 'ngbe_ethdev.c',
> + 'ngbe_ipsec.c',
Ideally you shall be creating a crypto/security driver and have your
ipsec related functions there.
@akhil - what is your opinion here?
> 'ngbe_ptypes.c',
> 'ngbe_pf.c',
> 'ngbe_rxtx.c',
> )
>
> -deps += ['hash']
> +deps += ['hash', 'security']
>
> includes += include_directories('base')
>
> diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
> index 4eaf9b0724..b0e0f7411e 100644
> --- a/drivers/net/ngbe/ngbe_ethdev.c
> +++ b/drivers/net/ngbe/ngbe_ethdev.c
> @@ -430,6 +430,12 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
> /* Unlock any pending hardware semaphore */
> ngbe_swfw_lock_reset(hw);
>
> +#ifdef RTE_LIB_SECURITY
> + /* Initialize security_ctx only for primary process*/
> + if (ngbe_ipsec_ctx_create(eth_dev))
> + return -ENOMEM;
> +#endif
> +
> /* Get Hardware Flow Control setting */
> hw->fc.requested_mode = ngbe_fc_full;
> hw->fc.current_mode = ngbe_fc_full;
> @@ -1282,6 +1288,10 @@ ngbe_dev_close(struct rte_eth_dev *dev)
> rte_free(dev->data->hash_mac_addrs);
> dev->data->hash_mac_addrs = NULL;
>
> +#ifdef RTE_LIB_SECURITY
> + rte_free(dev->security_ctx);
> +#endif
> +
> return ret;
> }
>
> diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
> index aacc0b68b2..9eda024d65 100644
> --- a/drivers/net/ngbe/ngbe_ethdev.h
> +++ b/drivers/net/ngbe/ngbe_ethdev.h
> @@ -264,6 +264,10 @@ void ngbe_pf_mbx_process(struct rte_eth_dev *eth_dev);
>
> int ngbe_pf_host_configure(struct rte_eth_dev *eth_dev);
>
> +#ifdef RTE_LIB_SECURITY
> +int ngbe_ipsec_ctx_create(struct rte_eth_dev *dev);
> +#endif
> +
> /* High threshold controlling when to start sending XOFF frames. */
> #define NGBE_FC_XOFF_HITH 128 /*KB*/
> /* Low threshold controlling when to start sending XON frames. */
> diff --git a/drivers/net/ngbe/ngbe_ipsec.c b/drivers/net/ngbe/ngbe_ipsec.c
> new file mode 100644
> index 0000000000..5f8b0bab29
> --- /dev/null
> +++ b/drivers/net/ngbe/ngbe_ipsec.c
> @@ -0,0 +1,178 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2018-2021 Beijing WangXun Technology Co., Ltd.
> + * Copyright(c) 2010-2017 Intel Corporation
> + */
> +
> +#include <ethdev_pci.h>
> +#include <rte_security_driver.h>
> +#include <rte_cryptodev.h>
> +
> +#include "base/ngbe.h"
> +#include "ngbe_ethdev.h"
> +
> +static const struct rte_security_capability *
> +ngbe_crypto_capabilities_get(void *device __rte_unused)
> +{
> + static const struct rte_cryptodev_capabilities
> + aes_gcm_gmac_crypto_capabilities[] = {
> + { /* AES GMAC (128-bit) */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
> + {.auth = {
> + .algo = RTE_CRYPTO_AUTH_AES_GMAC,
> + .block_size = 16,
> + .key_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + .iv_size = {
> + .min = 12,
> + .max = 12,
> + .increment = 0
> + }
> + }, }
> + }, }
> + },
> + { /* AES GCM (128-bit) */
> + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_AEAD,
> + {.aead = {
> + .algo = RTE_CRYPTO_AEAD_AES_GCM,
> + .block_size = 16,
> + .key_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + .digest_size = {
> + .min = 16,
> + .max = 16,
> + .increment = 0
> + },
> + .aad_size = {
> + .min = 0,
> + .max = 65535,
> + .increment = 1
> + },
> + .iv_size = {
> + .min = 12,
> + .max = 12,
> + .increment = 0
> + }
> + }, }
> + }, }
> + },
> + {
> + .op = RTE_CRYPTO_OP_TYPE_UNDEFINED,
> + {.sym = {
> + .xform_type = RTE_CRYPTO_SYM_XFORM_NOT_SPECIFIED
> + }, }
> + },
> + };
> +
> + static const struct rte_security_capability
> + ngbe_security_capabilities[] = {
> + { /* IPsec Inline Crypto ESP Transport Egress */
> + .action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
> + .protocol = RTE_SECURITY_PROTOCOL_IPSEC,
> + {.ipsec = {
> + .proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
> + .mode = RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
> + .direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
> + .options = { 0 }
> + } },
> + .crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
> + .ol_flags = RTE_SECURITY_TX_OLOAD_NEED_MDATA
> + },
> + { /* IPsec Inline Crypto ESP Transport Ingress */
> + .action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
> + .protocol = RTE_SECURITY_PROTOCOL_IPSEC,
> + {.ipsec = {
> + .proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
> + .mode = RTE_SECURITY_IPSEC_SA_MODE_TRANSPORT,
> + .direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
> + .options = { 0 }
> + } },
> + .crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
> + .ol_flags = 0
> + },
> + { /* IPsec Inline Crypto ESP Tunnel Egress */
> + .action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
> + .protocol = RTE_SECURITY_PROTOCOL_IPSEC,
> + {.ipsec = {
> + .proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
> + .mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
> + .direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
> + .options = { 0 }
> + } },
> + .crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
> + .ol_flags = RTE_SECURITY_TX_OLOAD_NEED_MDATA
> + },
> + { /* IPsec Inline Crypto ESP Tunnel Ingress */
> + .action = RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO,
> + .protocol = RTE_SECURITY_PROTOCOL_IPSEC,
> + {.ipsec = {
> + .proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
> + .mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
> + .direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
> + .options = { 0 }
> + } },
> + .crypto_capabilities = aes_gcm_gmac_crypto_capabilities,
> + .ol_flags = 0
> + },
> + {
> + .action = RTE_SECURITY_ACTION_TYPE_NONE
> + }
> + };
> +
> + return ngbe_security_capabilities;
> +}
> +
> +static struct rte_security_ops ngbe_security_ops = {
> + .capabilities_get = ngbe_crypto_capabilities_get
> +};
> +
> +static int
> +ngbe_crypto_capable(struct rte_eth_dev *dev)
> +{
> + struct ngbe_hw *hw = ngbe_dev_hw(dev);
> + uint32_t reg_i, reg, capable = 1;
> + /* test if rx crypto can be enabled and then write back initial value*/
> + reg_i = rd32(hw, NGBE_SECRXCTL);
> + wr32m(hw, NGBE_SECRXCTL, NGBE_SECRXCTL_ODSA, 0);
> + reg = rd32m(hw, NGBE_SECRXCTL, NGBE_SECRXCTL_ODSA);
> + if (reg != 0)
> + capable = 0;
> + wr32(hw, NGBE_SECRXCTL, reg_i);
> + return capable;
> +}
> +
> +int
> +ngbe_ipsec_ctx_create(struct rte_eth_dev *dev)
> +{
> + struct rte_security_ctx *ctx = NULL;
> +
> + if (ngbe_crypto_capable(dev)) {
> + ctx = rte_malloc("rte_security_instances_ops",
> + sizeof(struct rte_security_ctx), 0);
> + if (ctx) {
> + ctx->device = (void *)dev;
> + ctx->ops = &ngbe_security_ops;
> + ctx->sess_cnt = 0;
> + dev->security_ctx = ctx;
> + } else {
> + return -ENOMEM;
> + }
> + }
> + if (rte_security_dynfield_register() < 0)
> + return -rte_errno;
> + return 0;
> +}
next prev parent reply other threads:[~2021-09-16 9:04 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-08 8:37 [dpdk-dev] [PATCH 00/32] net/ngbe: add many features Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 01/32] net/ngbe: add packet type Jiawen Wu
2021-09-15 16:47 ` Ferruh Yigit
2021-09-22 8:01 ` Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 02/32] net/ngbe: support scattered Rx Jiawen Wu
2021-09-15 13:22 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 03/32] net/ngbe: support Rx checksum offload Jiawen Wu
2021-09-15 16:48 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 04/32] net/ngbe: support TSO Jiawen Wu
2021-09-15 16:57 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 05/32] net/ngbe: support CRC offload Jiawen Wu
2021-09-15 16:48 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 06/32] net/ngbe: support jumbo frame Jiawen Wu
2021-09-15 16:48 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 07/32] net/ngbe: support VLAN and QinQ offload Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 08/32] net/ngbe: support basic statistics Jiawen Wu
2021-09-15 16:50 ` Ferruh Yigit
2021-10-14 2:51 ` Jiawen Wu
2021-10-14 7:59 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 09/32] net/ngbe: support device xstats Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 10/32] net/ngbe: support MTU set Jiawen Wu
2021-09-15 16:52 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 11/32] net/ngbe: add device promiscuous and allmulticast mode Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 12/32] net/ngbe: support getting FW version Jiawen Wu
2021-09-15 16:53 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 13/32] net/ngbe: add loopback mode Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 14/32] net/ngbe: support Rx interrupt Jiawen Wu
2021-09-15 16:53 ` Ferruh Yigit
2021-10-14 10:11 ` Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 15/32] net/ngbe: support MAC filters Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 16/32] net/ngbe: support VLAN filter Jiawen Wu
2021-09-15 16:54 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 17/32] net/ngbe: support RSS hash Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 18/32] net/ngbe: support SRIOV Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 19/32] net/ngbe: add mailbox process operations Jiawen Wu
2021-09-15 16:56 ` Ferruh Yigit
2021-09-08 8:37 ` [dpdk-dev] [PATCH 20/32] net/ngbe: support flow control Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 21/32] net/ngbe: support device LED on and off Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 22/32] net/ngbe: support EEPROM dump Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 23/32] net/ngbe: support register dump Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 24/32] net/ngbe: support timesync Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 25/32] net/ngbe: add Rx and Tx queue info get Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 26/32] net/ngbe: add Rx and Tx descriptor status Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 27/32] net/ngbe: add Tx done cleanup Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 28/32] net/ngbe: add IPsec context creation Jiawen Wu
2021-09-15 16:58 ` Ferruh Yigit
2021-09-16 9:00 ` Hemant Agrawal
2021-09-16 17:15 ` Ferruh Yigit
2021-09-16 9:04 ` Hemant Agrawal [this message]
2021-09-08 8:37 ` [dpdk-dev] [PATCH 29/32] net/ngbe: create and destroy security session Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 30/32] net/ngbe: support security operations Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 31/32] net/ngbe: add security offload in Rx and Tx Jiawen Wu
2021-09-08 8:37 ` [dpdk-dev] [PATCH 32/32] doc: update for ngbe Jiawen Wu
2021-09-15 16:58 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c651c92e-5020-14f0-80b1-3073637af4bb@oss.nxp.com \
--to=hemant.agrawal@oss.nxp.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=hemant.agrawal@nxp.com \
--cc=jiawenwu@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).