From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id A5B8FA2EDB for ; Wed, 2 Oct 2019 15:42:36 +0200 (CEST) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id 088031BF20; Wed, 2 Oct 2019 15:42:14 +0200 (CEST) Received: from mta123.f1.k8.com.br (mta123.f1.k8.com.br [187.73.32.199]) by dpdk.org (Postfix) with ESMTP id 1A9BF1BE8A for ; Mon, 30 Sep 2019 21:35:20 +0200 (CEST) Received: from [192.168.86.43] (pool-108-20-205-122.bstnma.fios.verizon.net [108.20.205.122]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtpz.f1.k8.com.br (Postfix) with ESMTPSA id 3B7CC6007F; Mon, 30 Sep 2019 19:35:17 +0000 (UTC) X-DKIM: OpenDKIM Filter v2.6.8 smtpz.f1.k8.com.br 3B7CC6007F DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=digirati.com.br; s=default; t=1569872118; bh=RjpvIFEb0s/WqW6GkJPiy7UJbobpsMFkDlpsbYnkn6k=; h=Subject:To:From:Date:Feedback-ID; b=c1mOluRJPbA2yhHcG8Bmyb/+U+Gr6rRRSArKqYxJd8uEcqoWvoJF0FdlKRHSJUApU BMaFqM4Fq31bRMZOBK8VNrsAgXU2uSmsWmkSsu7hcbjL1aoqy5p6QlwmMhMvHbi5V6 ayEk0Oof8AjMpcon+5O2DkyI79F4OE8DJb9r9bDA= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=k8.com.br; s=default; t=1569872118; bh=RjpvIFEb0s/WqW6GkJPiy7UJbobpsMFkDlpsbYnkn6k=; h=Subject:To:From:Date:Feedback-ID; b=CTcsBZm1xfRqn9VsR3GOUTpH9oz6KIKVzT5wd3S59kHqM7Wxgzcdt0MU4FENSPO4y IiGDUWy+6+f1f+KpPepm7fL8C5ZBl6TfsbewvxyqLVrWYTXYus46ZAn+Z8iiPgrGxe BQRLQ+K6GculyU/C/OEuRIVxMSDptcP/O7m7k7tQ= To: Konstantin Ananyev , dev@dpdk.org Cc: olivier.matz@6wind.com, anatoly.burakov@intel.com, vipin.varghese@intel.com References: <20190816125304.29719-1-konstantin.ananyev@intel.com> <20190927135054.20845-1-konstantin.ananyev@intel.com> <20190927135054.20845-4-konstantin.ananyev@intel.com> From: Michel Machado Organization: Digirati Internet LTDA. Message-ID: Date: Mon, 30 Sep 2019 15:35:14 -0400 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.8.0 MIME-Version: 1.0 In-Reply-To: <20190927135054.20845-4-konstantin.ananyev@intel.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Language: pt-BR Content-Transfer-Encoding: 7bit X-HN-S: bWljaGVsQGRpZ2lyYXRpLmNvbS5icg== X-HN-R: ZGV2QGRwZGsub3Jn a29uc3RhbnRpbi5hbmFueWV2QGludGVsLmNvbQ== Feedback-ID: MjAxOTA5MzA=:bWljaGVsQGRpZ2lyYXRpLmNvbS5icg==:ZGlnaXJhdGkuY29tLmJy:k8networks X-Mailman-Approved-At: Wed, 02 Oct 2019 15:42:06 +0200 Subject: Re: [dpdk-dev] [PATCH v2 3/3] examples/bpf: remove duplicate mbuf definition X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Acked-by: Michel Machado [ ]'s Michel Machado On 9/27/19 9:50 AM, Konstantin Ananyev wrote: > Get rid of duplicate definitions for rte_mbuf and related macros. > Include rte_mbuf_core.h instead. > > Signed-off-by: Konstantin Ananyev > --- > examples/bpf/mbuf.h | 605 -------------------------------------------- > examples/bpf/t2.c | 4 +- > examples/bpf/t3.c | 2 +- > 3 files changed, 3 insertions(+), 608 deletions(-) > delete mode 100644 examples/bpf/mbuf.h > > diff --git a/examples/bpf/mbuf.h b/examples/bpf/mbuf.h > deleted file mode 100644 > index e41c3d26e..000000000 > --- a/examples/bpf/mbuf.h > +++ /dev/null > @@ -1,605 +0,0 @@ > -/* SPDX-License-Identifier: BSD-3-Clause > - * Copyright(c) 2010-2014 Intel Corporation. > - * Copyright 2014 6WIND S.A. > - */ > - > -/* > - * Snipper from dpdk.org rte_mbuf.h. > - * used to provide BPF programs information about rte_mbuf layout. > - */ > - > -#ifndef _MBUF_H_ > -#define _MBUF_H_ > - > -#include > -#include > - > -#ifdef __cplusplus > -extern "C" { > -#endif > - > -/* > - * Packet Offload Features Flags. It also carry packet type information. > - * Critical resources. Both rx/tx shared these bits. Be cautious on any change > - * > - * - RX flags start at bit position zero, and get added to the left of previous > - * flags. > - * - The most-significant 3 bits are reserved for generic mbuf flags > - * - TX flags therefore start at bit position 60 (i.e. 63-3), and new flags get > - * added to the right of the previously defined flags i.e. they should count > - * downwards, not upwards. > - * > - * Keep these flags synchronized with rte_get_rx_ol_flag_name() and > - * rte_get_tx_ol_flag_name(). > - */ > - > -/** > - * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when > - * the packet is recognized as a VLAN, but the behavior between PMDs > - * was not the same. This flag is kept for some time to avoid breaking > - * applications and should be replaced by PKT_RX_VLAN_STRIPPED. > - */ > -#define PKT_RX_VLAN_PKT (1ULL << 0) > - > -#define PKT_RX_RSS_HASH (1ULL << 1) > -/**< RX packet with RSS hash result. */ > -#define PKT_RX_FDIR (1ULL << 2) > -/**< RX packet with FDIR match indicate. */ > - > -/** > - * Deprecated. > - * Checking this flag alone is deprecated: check the 2 bits of > - * PKT_RX_L4_CKSUM_MASK. > - * This flag was set when the L4 checksum of a packet was detected as > - * wrong by the hardware. > - */ > -#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) > - > -/** > - * Deprecated. > - * Checking this flag alone is deprecated: check the 2 bits of > - * PKT_RX_IP_CKSUM_MASK. > - * This flag was set when the IP checksum of a packet was detected as > - * wrong by the hardware. > - */ > -#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) > - > -#define PKT_RX_EIP_CKSUM_BAD (1ULL << 5) > -/**< External IP header checksum error. */ > - > -/** > - * A vlan has been stripped by the hardware and its tci is saved in > - * mbuf->vlan_tci. This can only happen if vlan stripping is enabled > - * in the RX configuration of the PMD. > - */ > -#define PKT_RX_VLAN_STRIPPED (1ULL << 6) > - > -/** > - * Mask of bits used to determine the status of RX IP checksum. > - * - PKT_RX_IP_CKSUM_UNKNOWN: no information about the RX IP checksum > - * - PKT_RX_IP_CKSUM_BAD: the IP checksum in the packet is wrong > - * - PKT_RX_IP_CKSUM_GOOD: the IP checksum in the packet is valid > - * - PKT_RX_IP_CKSUM_NONE: the IP checksum is not correct in the packet > - * data, but the integrity of the IP header is verified. > - */ > -#define PKT_RX_IP_CKSUM_MASK ((1ULL << 4) | (1ULL << 7)) > - > -#define PKT_RX_IP_CKSUM_UNKNOWN 0 > -#define PKT_RX_IP_CKSUM_BAD (1ULL << 4) > -#define PKT_RX_IP_CKSUM_GOOD (1ULL << 7) > -#define PKT_RX_IP_CKSUM_NONE ((1ULL << 4) | (1ULL << 7)) > - > -/** > - * Mask of bits used to determine the status of RX L4 checksum. > - * - PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum > - * - PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong > - * - PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid > - * - PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet > - * data, but the integrity of the L4 data is verified. > - */ > -#define PKT_RX_L4_CKSUM_MASK ((1ULL << 3) | (1ULL << 8)) > - > -#define PKT_RX_L4_CKSUM_UNKNOWN 0 > -#define PKT_RX_L4_CKSUM_BAD (1ULL << 3) > -#define PKT_RX_L4_CKSUM_GOOD (1ULL << 8) > -#define PKT_RX_L4_CKSUM_NONE ((1ULL << 3) | (1ULL << 8)) > - > -#define PKT_RX_IEEE1588_PTP (1ULL << 9) > -/**< RX IEEE1588 L2 Ethernet PT Packet. */ > -#define PKT_RX_IEEE1588_TMST (1ULL << 10) > -/**< RX IEEE1588 L2/L4 timestamped packet.*/ > -#define PKT_RX_FDIR_ID (1ULL << 13) > -/**< FD id reported if FDIR match. */ > -#define PKT_RX_FDIR_FLX (1ULL << 14) > -/**< Flexible bytes reported if FDIR match. */ > - > -/** > - * The 2 vlans have been stripped by the hardware and their tci are > - * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer). > - * This can only happen if vlan stripping is enabled in the RX > - * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED > - * must also be set. > - */ > -#define PKT_RX_QINQ_STRIPPED (1ULL << 15) > - > -/** > - * Deprecated. > - * RX packet with double VLAN stripped. > - * This flag is replaced by PKT_RX_QINQ_STRIPPED. > - */ > -#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED > - > -/** > - * When packets are coalesced by a hardware or virtual driver, this flag > - * can be set in the RX mbuf, meaning that the m->tso_segsz field is > - * valid and is set to the segment size of original packets. > - */ > -#define PKT_RX_LRO (1ULL << 16) > - > -/** > - * Indicate that the timestamp field in the mbuf is valid. > - */ > -#define PKT_RX_TIMESTAMP (1ULL << 17) > - > -/* add new RX flags here */ > - > -/* add new TX flags here */ > - > -/** > - * Offload the MACsec. This flag must be set by the application to enable > - * this offload feature for a packet to be transmitted. > - */ > -#define PKT_TX_MACSEC (1ULL << 44) > - > -/** > - * Bits 45:48 used for the tunnel type. > - * When doing Tx offload like TSO or checksum, the HW needs to configure the > - * tunnel type into the HW descriptors. > - */ > -#define PKT_TX_TUNNEL_VXLAN (0x1ULL << 45) > -#define PKT_TX_TUNNEL_GRE (0x2ULL << 45) > -#define PKT_TX_TUNNEL_IPIP (0x3ULL << 45) > -#define PKT_TX_TUNNEL_GENEVE (0x4ULL << 45) > -/**< TX packet with MPLS-in-UDP RFC 7510 header. */ > -#define PKT_TX_TUNNEL_MPLSINUDP (0x5ULL << 45) > -/* add new TX TUNNEL type here */ > -#define PKT_TX_TUNNEL_MASK (0xFULL << 45) > - > -/** > - * Second VLAN insertion (QinQ) flag. > - */ > -#define PKT_TX_QINQ_PKT (1ULL << 49) > -/**< TX packet with double VLAN inserted. */ > - > -/** > - * TCP segmentation offload. To enable this offload feature for a > - * packet to be transmitted on hardware supporting TSO: > - * - set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies > - * PKT_TX_TCP_CKSUM) > - * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6 > - * - if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum > - * to 0 in the packet > - * - fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz > - * - calculate the pseudo header checksum without taking ip_len in account, > - * and set it in the TCP header. Refer to rte_ipv4_phdr_cksum() and > - * rte_ipv6_phdr_cksum() that can be used as helpers. > - */ > -#define PKT_TX_TCP_SEG (1ULL << 50) > - > -#define PKT_TX_IEEE1588_TMST (1ULL << 51) > -/**< TX IEEE1588 packet to timestamp. */ > - > -/** > - * Bits 52+53 used for L4 packet type with checksum enabled: 00: Reserved, > - * 01: TCP checksum, 10: SCTP checksum, 11: UDP checksum. To use hardware > - * L4 checksum offload, the user needs to: > - * - fill l2_len and l3_len in mbuf > - * - set the flags PKT_TX_TCP_CKSUM, PKT_TX_SCTP_CKSUM or PKT_TX_UDP_CKSUM > - * - set the flag PKT_TX_IPV4 or PKT_TX_IPV6 > - * - calculate the pseudo header checksum and set it in the L4 header (only > - * for TCP or UDP). See rte_ipv4_phdr_cksum() and rte_ipv6_phdr_cksum(). > - * For SCTP, set the crc field to 0. > - */ > -#define PKT_TX_L4_NO_CKSUM (0ULL << 52) > -/**< Disable L4 cksum of TX pkt. */ > -#define PKT_TX_TCP_CKSUM (1ULL << 52) > -/**< TCP cksum of TX pkt. computed by NIC. */ > -#define PKT_TX_SCTP_CKSUM (2ULL << 52) > -/**< SCTP cksum of TX pkt. computed by NIC. */ > -#define PKT_TX_UDP_CKSUM (3ULL << 52) > -/**< UDP cksum of TX pkt. computed by NIC. */ > -#define PKT_TX_L4_MASK (3ULL << 52) > -/**< Mask for L4 cksum offload request. */ > - > -/** > - * Offload the IP checksum in the hardware. The flag PKT_TX_IPV4 should > - * also be set by the application, although a PMD will only check > - * PKT_TX_IP_CKSUM. > - * - set the IP checksum field in the packet to 0 > - * - fill the mbuf offload information: l2_len, l3_len > - */ > -#define PKT_TX_IP_CKSUM (1ULL << 54) > - > -/** > - * Packet is IPv4. This flag must be set when using any offload feature > - * (TSO, L3 or L4 checksum) to tell the NIC that the packet is an IPv4 > - * packet. If the packet is a tunneled packet, this flag is related to > - * the inner headers. > - */ > -#define PKT_TX_IPV4 (1ULL << 55) > - > -/** > - * Packet is IPv6. This flag must be set when using an offload feature > - * (TSO or L4 checksum) to tell the NIC that the packet is an IPv6 > - * packet. If the packet is a tunneled packet, this flag is related to > - * the inner headers. > - */ > -#define PKT_TX_IPV6 (1ULL << 56) > - > -#define PKT_TX_VLAN_PKT (1ULL << 57) > -/**< TX packet is a 802.1q VLAN packet. */ > - > -/** > - * Offload the IP checksum of an external header in the hardware. The > - * flag PKT_TX_OUTER_IPV4 should also be set by the application, alto ugh > - * a PMD will only check PKT_TX_IP_CKSUM. The IP checksum field in the > - * packet must be set to 0. > - * - set the outer IP checksum field in the packet to 0 > - * - fill the mbuf offload information: outer_l2_len, outer_l3_len > - */ > -#define PKT_TX_OUTER_IP_CKSUM (1ULL << 58) > - > -/** > - * Packet outer header is IPv4. This flag must be set when using any > - * outer offload feature (L3 or L4 checksum) to tell the NIC that the > - * outer header of the tunneled packet is an IPv4 packet. > - */ > -#define PKT_TX_OUTER_IPV4 (1ULL << 59) > - > -/** > - * Packet outer header is IPv6. This flag must be set when using any > - * outer offload feature (L4 checksum) to tell the NIC that the outer > - * header of the tunneled packet is an IPv6 packet. > - */ > -#define PKT_TX_OUTER_IPV6 (1ULL << 60) > - > -/** > - * Bitmask of all supported packet Tx offload features flags, > - * which can be set for packet. > - */ > -#define PKT_TX_OFFLOAD_MASK ( \ > - PKT_TX_IP_CKSUM | \ > - PKT_TX_L4_MASK | \ > - PKT_TX_OUTER_IP_CKSUM | \ > - PKT_TX_TCP_SEG | \ > - PKT_TX_IEEE1588_TMST | \ > - PKT_TX_QINQ_PKT | \ > - PKT_TX_VLAN_PKT | \ > - PKT_TX_TUNNEL_MASK | \ > - PKT_TX_MACSEC) > - > -#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */ > - > -#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */ > - > -/* Use final bit of flags to indicate a control mbuf */ > -#define CTRL_MBUF_FLAG (1ULL << 63) /**< Mbuf contains control data */ > - > -/** Alignment constraint of mbuf private area. */ > -#define RTE_MBUF_PRIV_ALIGN 8 > - > -/** > - * Get the name of a RX offload flag > - * > - * @param mask > - * The mask describing the flag. > - * @return > - * The name of this flag, or NULL if it's not a valid RX flag. > - */ > -const char *rte_get_rx_ol_flag_name(uint64_t mask); > - > -/** > - * Dump the list of RX offload flags in a buffer > - * > - * @param mask > - * The mask describing the RX flags. > - * @param buf > - * The output buffer. > - * @param buflen > - * The length of the buffer. > - * @return > - * 0 on success, (-1) on error. > - */ > -int rte_get_rx_ol_flag_list(uint64_t mask, char *buf, size_t buflen); > - > -/** > - * Get the name of a TX offload flag > - * > - * @param mask > - * The mask describing the flag. Usually only one bit must be set. > - * Several bits can be given if they belong to the same mask. > - * Ex: PKT_TX_L4_MASK. > - * @return > - * The name of this flag, or NULL if it's not a valid TX flag. > - */ > -const char *rte_get_tx_ol_flag_name(uint64_t mask); > - > -/** > - * Dump the list of TX offload flags in a buffer > - * > - * @param mask > - * The mask describing the TX flags. > - * @param buf > - * The output buffer. > - * @param buflen > - * The length of the buffer. > - * @return > - * 0 on success, (-1) on error. > - */ > -int rte_get_tx_ol_flag_list(uint64_t mask, char *buf, size_t buflen); > - > -/** > - * Some NICs need at least 2KB buffer to RX standard Ethernet frame without > - * splitting it into multiple segments. > - * So, for mbufs that planned to be involved into RX/TX, the recommended > - * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM. > - */ > -#define RTE_MBUF_DEFAULT_DATAROOM 2048 > -#define RTE_MBUF_DEFAULT_BUF_SIZE \ > - (RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM) > - > -/* define a set of marker types that can be used to refer to set points in the > - * mbuf. > - */ > -__extension__ > -typedef void *MARKER[0]; /**< generic marker for a point in a structure */ > -__extension__ > -typedef uint8_t MARKER8[0]; /**< generic marker with 1B alignment */ > -__extension__ > -typedef uint64_t MARKER64[0]; > -/**< marker that allows us to overwrite 8 bytes with a single assignment */ > - > -typedef struct { > - volatile int16_t cnt; /**< An internal counter value. */ > -} rte_atomic16_t; > - > -#define RTE_CACHE_LINE_MIN_SIZE 64 /**< Minimum Cache line size. */ > - > -/** > - * Force minimum cache line alignment. > - */ > -#define __rte_cache_min_aligned __rte_aligned(RTE_CACHE_LINE_MIN_SIZE) > - > -/** > - * IO virtual address type. > - * When the physical addressing mode (IOVA as PA) is in use, > - * the translation from an IO virtual address (IOVA) to a physical address > - * is a direct mapping, i.e. the same value. > - * Otherwise, in virtual mode (IOVA as VA), an IOMMU may do the translation. > - */ > -typedef uint64_t rte_iova_t; > -#define RTE_BAD_IOVA ((rte_iova_t)-1) > - > -/** > - * The generic rte_mbuf, containing a packet mbuf. > - */ > -struct rte_mbuf { > - MARKER cacheline0; > - > - void *buf_addr; /**< Virtual address of segment buffer. */ > - /** > - * Physical address of segment buffer. > - * Force alignment to 8-bytes, so as to ensure we have the exact > - * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes > - * working on vector drivers easier. > - */ > - RTE_STD_C11 > - union { > - rte_iova_t buf_iova; > - rte_iova_t buf_physaddr; /**< deprecated */ > - } __rte_aligned(sizeof(rte_iova_t)); > - > - /* next 8 bytes are initialised on RX descriptor rearm */ > - MARKER64 rearm_data; > - uint16_t data_off; > - > - /** > - * Reference counter. Its size should at least equal to the size > - * of port field (16 bits), to support zero-copy broadcast. > - * It should only be accessed using the following functions: > - * rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and > - * rte_mbuf_refcnt_set(). The functionality of these functions (atomic, > - * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC > - * config option. > - */ > - RTE_STD_C11 > - union { > - rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */ > - uint16_t refcnt; > - /**< Non-atomically accessed refcnt */ > - }; > - uint16_t nb_segs; /**< Number of segments. */ > - > - /** Input port (16 bits to support more than 256 virtual ports). */ > - uint16_t port; > - > - uint64_t ol_flags; /**< Offload features. */ > - > - /* remaining bytes are set on RX when pulling packet from descriptor */ > - MARKER rx_descriptor_fields1; > - > - /* > - * The packet type, which is the combination of outer/inner L2, L3, L4 > - * and tunnel types. The packet_type is about data really present in the > - * mbuf. Example: if vlan stripping is enabled, a received vlan packet > - * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the > - * vlan is stripped from the data. > - */ > - RTE_STD_C11 > - union { > - uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */ > - struct { > - uint32_t l2_type:4; /**< (Outer) L2 type. */ > - uint32_t l3_type:4; /**< (Outer) L3 type. */ > - uint32_t l4_type:4; /**< (Outer) L4 type. */ > - uint32_t tun_type:4; /**< Tunnel type. */ > - uint32_t inner_l2_type:4; /**< Inner L2 type. */ > - uint32_t inner_l3_type:4; /**< Inner L3 type. */ > - uint32_t inner_l4_type:4; /**< Inner L4 type. */ > - }; > - }; > - > - uint32_t pkt_len; /**< Total pkt len: sum of all segments. */ > - uint16_t data_len; /**< Amount of data in segment buffer. */ > - /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */ > - uint16_t vlan_tci; > - > - union { > - uint32_t rss; /**< RSS hash result if RSS enabled */ > - struct { > - RTE_STD_C11 > - union { > - struct { > - uint16_t hash; > - uint16_t id; > - }; > - uint32_t lo; > - /**< Second 4 flexible bytes */ > - }; > - uint32_t hi; > - /**< First 4 flexible bytes or FD ID, dependent on > - * PKT_RX_FDIR_* flag in ol_flags. > - */ > - } fdir; /**< Filter identifier if FDIR enabled */ > - struct { > - uint32_t lo; > - uint32_t hi; > - } sched; /**< Hierarchical scheduler */ > - uint32_t usr; > - /**< User defined tags. See rte_distributor_process() */ > - } hash; /**< hash information */ > - > - /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */ > - uint16_t vlan_tci_outer; > - > - uint16_t buf_len; /**< Length of segment buffer. */ > - > - /** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference > - * are not normalized but are always the same for a given port. > - */ > - uint64_t timestamp; > - > - /* second cache line - fields only used in slow path or on TX */ > - MARKER cacheline1 __rte_cache_min_aligned; > - > - RTE_STD_C11 > - union { > - void *userdata; /**< Can be used for external metadata */ > - uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */ > - }; > - > - struct rte_mempool *pool; /**< Pool from which mbuf was allocated. */ > - struct rte_mbuf *next; /**< Next segment of scattered packet. */ > - > - /* fields to support TX offloads */ > - RTE_STD_C11 > - union { > - uint64_t tx_offload; /**< combined for easy fetch */ > - __extension__ > - struct { > - uint64_t l2_len:7; > - /**< L2 (MAC) Header Length for non-tunneling pkt. > - * Outer_L4_len + ... + Inner_L2_len for tunneling pkt. > - */ > - uint64_t l3_len:9; /**< L3 (IP) Header Length. */ > - uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */ > - uint64_t tso_segsz:16; /**< TCP TSO segment size */ > - > - /* fields for TX offloading of tunnels */ > - uint64_t outer_l3_len:9; > - /**< Outer L3 (IP) Hdr Length. */ > - uint64_t outer_l2_len:7; > - /**< Outer L2 (MAC) Hdr Length. */ > - > - /* uint64_t unused:8; */ > - }; > - }; > - > - /** Size of the application private data. In case of an indirect > - * mbuf, it stores the direct mbuf private data size. > - */ > - uint16_t priv_size; > - > - /** Timesync flags for use with IEEE1588. */ > - uint16_t timesync; > - > - /** Sequence number. See also rte_reorder_insert(). */ > - uint32_t seqn; > - > -} __rte_cache_aligned; > - > - > -/** > - * Returns TRUE if given mbuf is cloned by mbuf indirection, or FALSE > - * otherwise. > - * > - * If a mbuf has its data in another mbuf and references it by mbuf > - * indirection, this mbuf can be defined as a cloned mbuf. > - */ > -#define RTE_MBUF_CLONED(mb) ((mb)->ol_flags & IND_ATTACHED_MBUF) > - > -/** > - * Returns TRUE if given mbuf is direct, or FALSE otherwise. > - * > - * If a mbuf embeds its own data after the rte_mbuf structure, this mbuf > - * can be defined as a direct mbuf. > - */ > -#define RTE_MBUF_DIRECT(mb) (!RTE_MBUF_CLONED(mb)) > - > -/** > - * Private data in case of pktmbuf pool. > - * > - * A structure that contains some pktmbuf_pool-specific data that are > - * appended after the mempool structure (in private data). > - */ > -struct rte_pktmbuf_pool_private { > - uint16_t mbuf_data_room_size; /**< Size of data space in each mbuf. */ > - uint16_t mbuf_priv_size; /**< Size of private area in each mbuf. */ > -}; > - > -/** > - * A macro that points to an offset into the data in the mbuf. > - * > - * The returned pointer is cast to type t. Before using this > - * function, the user must ensure that the first segment is large > - * enough to accommodate its data. > - * > - * @param m > - * The packet mbuf. > - * @param o > - * The offset into the mbuf data. > - * @param t > - * The type to cast the result into. > - */ > -#define rte_pktmbuf_mtod_offset(m, t, o) \ > - ((t)((char *)(m)->buf_addr + (m)->data_off + (o))) > - > -/** > - * A macro that points to the start of the data in the mbuf. > - * > - * The returned pointer is cast to type t. Before using this > - * function, the user must ensure that the first segment is large > - * enough to accommodate its data. > - * > - * @param m > - * The packet mbuf. > - * @param t > - * The type to cast the result into. > - */ > -#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0) > - > -#ifdef __cplusplus > -} > -#endif > - > -#endif /* _MBUF_H_ */ > diff --git a/examples/bpf/t2.c b/examples/bpf/t2.c > index 69d7a4fe1..9878eaf7b 100644 > --- a/examples/bpf/t2.c > +++ b/examples/bpf/t2.c > @@ -16,7 +16,7 @@ > #include > #include > #include > -#include "mbuf.h" > +#include > > uint64_t > entry(void *pkt) > @@ -25,7 +25,7 @@ entry(void *pkt) > > mb = pkt; > mb->vlan_tci = 0; > - mb->ol_flags &= ~(PKT_RX_VLAN_PKT | PKT_RX_VLAN_STRIPPED); > + mb->ol_flags &= ~(PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED); > > return 1; > } > diff --git a/examples/bpf/t3.c b/examples/bpf/t3.c > index 9ba34638a..f58ff64b3 100644 > --- a/examples/bpf/t3.c > +++ b/examples/bpf/t3.c > @@ -22,7 +22,7 @@ > #include > #include > #include > -#include "mbuf.h" > +#include > #include > > extern void rte_pktmbuf_dump(FILE *, const struct rte_mbuf *, unsigned int); >