From: "Stokes, Ian" <ian.stokes@intel.com>
To: Christian Ehrhardt <christian.ehrhardt@canonical.com>,
"stable@dpdk.org" <stable@dpdk.org>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Abhishek Marathe <Abhishek.Marathe@microsoft.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
"Ali Alnubani" <alialnu@nvidia.com>,
"Walker, Benjamin" <benjamin.walker@intel.com>,
David Christensen <drc@linux.vnet.ibm.com>,
"Govindharajan, Hariprasad" <hariprasad.govindharajan@intel.com>,
"Hemant Agrawal" <hemant.agrawal@nxp.com>,
Jerin Jacob <jerinj@marvell.com>,
"Mcnamara, John" <john.mcnamara@intel.com>,
Ju-Hyoung Lee <juhlee@microsoft.com>,
Kevin Traynor <ktraynor@redhat.com>,
Luca Boccassi <bluca@debian.org>, Pei Zhang <pezhang@redhat.com>,
"Yu, PingX" <pingx.yu@intel.com>,
"Xu, Qian Q" <qian.q.xu@intel.com>,
Raslan Darawsheh <rasland@nvidia.com>,
Thomas Monjalon <thomas@monjalon.net>,
"Peng, Yuan" <yuan.peng@intel.com>,
"Chen, Zhaoyan" <zhaoyan.chen@intel.com>
Subject: Re: [dpdk-dev] 19.11.9 patches review and test
Date: Thu, 17 Jun 2021 17:46:52 +0000 [thread overview]
Message-ID: <d6c887cee2614dfdba9fa2b830131e22@intel.com> (raw)
In-Reply-To: <20210617063803.3490415-1-christian.ehrhardt@canonical.com>
> Hi all,
>
> Here is a list of patches targeted for stable release 19.11.9.
>
> The planned date for the final release is 2nd July.
>
> Please help with testing and validation of your use cases and report
> any issues/results with reply-all to this mail. For the final release
> the fixes and reported validations will be added to the release notes.
>
> A renewed release candidate tarball can be found at:
>
> https://dpdk.org/browse/dpdk-stable/tag/?id=v19.11.9-rc3
>
> These patches are located at branch 19.11 of dpdk-stable repo:
> https://dpdk.org/browse/dpdk-stable/
>
> Thanks.
>
> Christian Ehrhardt <christian.ehrhardt@canonical.com>
Hi Christian,
Following was validated with OVS 2.14 and 2.13 without issues for i40e and ice devices, tests were as follows in VSPERF.
phy2phy_tput
pvp_tput
pvp_cont
pvvp_tput
pvpv_cont
ovsdpdk_jumbo_p2p
ovsdpdk_jumbo_pvp
ovsdpdk_jumbo_p2p_upper_bound
ovsdpdk_mq_pvp_rxqs_testpmd
ovsdpdk_mq_pvp_rxqs_linux_bridge
Please note that DPDK 19.11.9 RCs were compiled using Make, not meson. I think canonical build DPDK with Meson for use with OVS 2.13 and 2.14. Could I ask that this be validated on the Canonical package build side before final sign off for use in OVS.
Regards
Ian
>
> ---
> Adam Dybkowski (3):
> common/qat: increase IM buffer size for GEN3
> compress/qat: enable compression on GEN3
> crypto/qat: fix null authentication request
>
> Ajit Khaparde (3):
> net/bnxt: fix RSS context cleanup
> net/bnxt: fix mismatched type comparison in MAC restore
> net/bnxt: check PCI config read
>
> Alvin Zhang (7):
> net/ice: fix VLAN filter with PF
> net/i40e: fix input set field mask
> net/e1000: fix Rx error counter for bad length
> net/e1000: fix max Rx packet size
> net/ice: fix fast mbuf freeing
> net/iavf: fix VF to PF command failure handling
> net/i40e: fix VF RSS configuration
>
> Anatoly Burakov (3):
> fbarray: fix log message on truncation error
> power: do not skip saving original P-state governor
> power: save original ACPI governor always
>
> Andrew Rybchenko (2):
> net/failsafe: fix RSS hash offload reporting
> net/failsafe: report minimum and maximum MTU
>
> Andy Moreton (1):
> common/sfc_efx/base: limit reported MCDI response length
>
> Apeksha Gupta (1):
> examples/l2fwd-crypto: skip masked devices
>
> Arek Kusztal (1):
> crypto/qat: fix offset for out-of-place scatter-gather
>
> Beilei Xing (2):
> net/i40evf: fix packet loss for X722
> net/iavf: fix Tx context descriptor
>
> Bruce Richardson (1):
> build: exclude meson files from examples installation
>
> Chaoyong He (1):
> doc: fix multiport syntax in nfp guide
>
> Chenbo Xia (1):
> examples/vhost: check memory table query
>
> Chengchang Tang (13):
> ethdev: validate input in module EEPROM dump
> ethdev: validate input in register info
> ethdev: validate input in EEPROM info
> net/hns3: fix rollback after setting PVID failure
> examples: add eal cleanup to examples
> net/bonding: fix adding itself as its slave
> app/testpmd: fix max queue number for Tx offloads
> net/tap: fix interrupt vector array size
> net/bonding: fix socket ID check
> net/tap: check ioctl on restore
> net/hns3: fix HW buffer size on MTU update
> net/hns3: fix processing Tx offload flags
> examples/timer: fix time interval
>
> Chengwen Feng (32):
> net/hns3: fix flow counter value
> net/hns3: fix VF mailbox head field
> net/hns3: support get device version when dump register
> test: check thread creation
> common/dpaax: fix possible null pointer access
> examples/ethtool: remove unused parsing
> net/e1000/base: fix timeout for shadow RAM write
> mbuf: check shared memory before dumping dynamic space
> eventdev: remove redundant thread name setting
> eventdev: fix memory leakage on thread creation failure
> net/kni: check init result
> net/hns3: fix mailbox error message
> net/hns3: remove unused mailbox macro and struct
> net/bonding: fix leak on remove
> net/i40e: fix negative VEB index
> net/i40e: remove redundant VSI check in Tx queue setup
> net/hns3: log time delta in decimal format
> net/hns3: remove unused macros
> net/hns3: remove unused VMDq code
> raw/ntb: check SPAD user index
> raw/ntb: check memory allocations
> ipc: check malloc sync reply result
> eal: fix service core list parsing
> net/hns3: fix handling link update
> ipc: use monotonic clock
> net/hns3: return error on PCI config write failure
> net/hns3: clear hash map on flow director clear
> net/hns3: fix querying flow director counter for out param
> net/hns3: fix secondary process request start/stop Rx/Tx
> net/hns3: fix ordering in secondary process initialization
> net/mlx4: fix secondary process initialization ordering
> net/mlx5: fix secondary process initialization ordering
>
> Christian Ehrhardt (5):
> vfio: fix stdbool usage without include
> kni: fix compilation on SLES15-SP3
> version: 19.11.9-rc1
> version: 19.11.9-rc2
> Revert "kni: fix compilation on SLES15-SP3"
>
> Ciara Loftus (1):
> net/af_xdp: fix error handling during Rx queue setup
>
> Conor Walsh (1):
> examples/l3fwd: fix LPM IPv6 subnets
>
> Dapeng Yu (2):
> net/e1000: remove MTU setting limitation
> examples/packet_ordering: fix port configuration
>
> David Christensen (1):
> config/ppc: reduce number of cores and NUMA nodes
>
> David Harton (1):
> net/ena: fix releasing Tx ring mbufs
>
> David Hunt (4):
> test/power: fix CPU frequency check
> test/power: add turbo mode to frequency check
> test/power: fix low frequency test when turbo enabled
> test/power: fix turbo test
>
> David Marchand (5):
> doc: fix sphinx rtd theme import in GHA
> service: clean references to removed symbol
> bus/fslmc: remove unused debug macro
> event/dpaa2: remove unused macros
> net/ice/base: fix memory allocation wrapper
>
> Dmitry Kozlyuk (3):
> net/pcap: fix format string
> examples/rxtx_callbacks: fix port ID format specifier
> eal/windows: add cleanup function stub
>
> Ed Czeck (2):
> net/ark: update packet director initial state
> net/ark: refactor Rx buffer recovery
>
> Feifei Wang (1):
> net/i40e: fix parsing packet type for NEON
>
> Ferruh Yigit (8):
> power: remove duplicated symbols from map file
> log/linux: make default output stderr
> license: fix typos
> net/bnx2x: fix build with GCC 11
> net/bnx2x: fix build with GCC 11
> net/ice/base: fix build with GCC 11
> net/tap: fix build with GCC 11
> test/table: fix build with GCC 11
>
> Guoyang Zhou (1):
> net/hinic: fix crash in secondary process
>
> Haiyue Wang (1):
> net/ixgbe: fix Rx errors statistics for UDP checksum
>
> Harman Kalra (1):
> event/octeontx2: fix device reconfigure for single slot
>
> Heinrich Kuhn (1):
> net/nfp: fix reporting of RSS capabilities
>
> Hemant Agrawal (3):
> ethdev: add missing buses in device iterator
> crypto/dpaa2_sec: fix close and uninit functions
> crypto/dpaa_sec: affine the thread portal affinity
>
> Hongbo Zheng (6):
> app/testpmd: fix Tx/Rx descriptor query error log
> net/hns3: fix FLR miss detection
> net/hns3: delete redundant blank line
> bpf: fix JSLT validation
> power: fix sanity checks for guest channel read
> examples/l3fwd-power: fix empty poll thresholds
>
> Huisong Li (11):
> net/hns3: fix flow control exception
> app/testpmd: fix bitmap of link speeds when force speed
> net/hns3: fix flow control mode
> net/hns3: fix DCB mode check
> net/hns3: fix VMDq mode check
> app/testpmd: fix forward lcores number for DCB
> app/testpmd: fix DCB forwarding configuration
> app/testpmd: fix DCB re-configuration
> net/hns3: fix requested FC mode rollback
> net/hns3: remove meaningless packet buffer rollback
> net/hns3: fix DCB reconfiguration
>
> Ibtisam Tariq (1):
> examples/vhost_crypto: remove unused short option
>
> Igor Chauskin (1):
> net/ena: switch memcpy to optimized version
>
> Igor Russkikh (2):
> net/qede: reduce log verbosity
> net/qede: accept bigger RSS table
>
> Ilya Maximets (1):
> net/virtio: fix interrupt unregistering for listening socket
>
> Ivan Malov (1):
> net: fix comment in IPv6 header
>
> Jiawei Wang (1):
> app/testpmd: fix NVGRE encap configuration
>
> Jiawei Zhu (1):
> net/mlx5: fix Rx segmented packets on mbuf starvation
>
> Jiayu Hu (1):
> vhost: fix queue initialization
>
> Jie Wang (1):
> net/ice: fix VSI array out of bounds access
>
> Juraj Linkeš (1):
> eal/arm64: fix platform register bit
>
> Kai Ji (1):
> test/crypto: fix auth-cipher compare length in OOP
>
> Kalesh AP (25):
> net/bnxt: remove unused macro
> net/bnxt: fix VNIC configuration
> net/bnxt: fix FW readiness check during recovery
> net/bnxt: fix device readiness check
> net/bnxt: fix HWRM and FW incompatibility handling
> net/bnxt: fix PCI write check
> net/bnxt: fix link state operations
> net/bnxt: fix configuring LRO
> net/bnxt: fix health check alarm cancellation
> net/bnxt: remove unnecessary forward declarations
> net/bnxt: remove unused function parameters
> net/bnxt: fix single PF per port check
> net/bnxt: prevent device access in error state
> net/bnxt: fix build failures after merging patches
> net/bnxt: drop unused attribute
> net/bnxt: fix double free in port start failure
> net/bnxt: fix firmware fatal error handling
> net/bnxt: fix memory allocation for command response
> net/bnxt: fix timesync when PTP is not supported
> net/bnxt: fix VF info allocation
> net/bnxt: fix PTP support for Thor
> net/bnxt: fix xstats get
> net/bnxt: fix Rx descriptor status
> net/bnxt: reset filter indices on free
> net/bnxt: fix ring count calculation for Thor
>
> Kevin Traynor (4):
> test/cmdline: fix inputs array
> test/crypto: fix build with GCC 11
> test: fix build with GCC 11
> test/cmdline: silence clang 12 warning
>
> Lance Richardson (6):
> net/bnxt: fix Rx queue count
> net/bnxt: fix Rx buffer posting
> net/bnxt: fix Tx length hint threshold
> net/bnxt: fix handling of null flow mask
> test: fix TCP header initialization
> net/bnxt: fix dynamic VNIC count
>
> Luc Pelletier (2):
> eal: fix race in control thread creation
> eal: fix hang in control thread creation
>
> Marvin Liu (4):
> vhost: fix split ring potential buffer overflow
> vhost: fix packed ring potential buffer overflow
> vhost: fix batch dequeue potential buffer overflow
> vhost: fix initialization of temporary header
>
> Michal Krawczyk (1):
> net/ena/base: fix type conversions by explicit casting
>
> Min Hu (Connor) (21):
> net/hns3: fix MTU config complexity
> net/hns3: update HiSilicon copyright syntax
> examples/ptpclient: remove wrong comment
> test/bpf: fix error message
> doc: fix HiSilicon copyright syntax
> net/hns3: remove unused macros
> net/hns3: remove unused macro
> app/eventdev: fix overflow in lcore list parsing
> test/kni: fix a comment
> test/kni: check init result
> net/hns3: fix typos on comments
> net/e1000: fix flow error message object
> app/bbdev: fix HARQ error messages
> raw/skeleton: add missing check after setting attribute
> test/timer: check memzone allocation
> app/crypto-perf: check memory allocation
> examples/flow_classify: fix NUMA check of port and core
> examples/l2fwd-cat: fix NUMA check of port and core
> examples/skeleton: fix NUMA check of port and core
> test: check flow classifier creation
> test: fix division by zero
>
> Murphy Yang (1):
> net/ixgbe: fix RSS RETA being reset after port start
>
> Natanael Copa (5):
> common/dpaax/caamflib: fix build with musl
> bus/dpaa: fix 64-bit arch detection
> bus/dpaa: fix build with musl
> net/cxgbe: remove use of uint type
> app/testpmd: fix build with musl
>
> Nipun Gupta (1):
> bus/dpaa: fix statistics reading
>
> Nithin Dabilpuram (2):
> vfio: do not merge contiguous areas
> vfio: fix DMA mapping granularity for IOVA as VA
>
> Olivier Matz (1):
> test/mempool: fix object initializer
>
> Pavan Nikhilesh (2):
> test/event: fix timeout accuracy
> app/eventdev: fix lcore parsing skipping last core
>
> Qi Zhang (5):
> net/ice/base: fix payload indicator on ptype
> net/ice/base: cleanup filter list on error
> net/ice/base: fix memory allocation for MAC addresses
> net/iavf: fix TSO max segment size
> common/iavf: use pad byte to specify MAC type
>
> Raslan Darawsheh (1):
> ethdev: update flow item GTP QFI definition
>
> Richael Zhuang (2):
> test/power: add delay before checking CPU frequency
> test/power: round CPU frequency to check
>
> Robin Zhang (5):
> net/i40e: announce request queue capability in PF
> net/i40e: fix lack of MAC type when set MAC address
> net/iavf: fix lack of MAC type when set MAC address
> net/iavf: fix primary MAC type when starting port
> net/i40e: fix primary MAC type when starting port
>
> Rohit Raj (2):
> net/dpaa2: fix getting link status
> examples/l2fwd-crypto: fix packet length while decryption
>
> Roy Shterman (1):
> mem: fix freeing segments in --huge-unlink mode
>
> Satheesh Paul (1):
> net/octeontx2: fix VLAN filter
>
> Shijith Thotton (1):
> eventdev: fix case to initiate crypto adapter service
>
> Siwar Zitouni (1):
> net/ice: fix disabling promiscuous mode
>
> Somnath Kotur (4):
> net/bnxt: fix Rx and Tx timestamps
> net/bnxt: fix Tx timestamp init
> net/bnxt: refactor multi-queue Rx configuration
> net/bnxt: fix Rx timestamp when FIFO pending bit is set
>
> Stanislaw Kardach (5):
> test: proceed if timer subsystem already initialized
> stack: allow lock-free only on relevant architectures
> test/distributor: fix worker notification in burst mode
> test/distributor: fix burst flush on worker quit
> net/ena: remove endian swap functions
>
> Stephen Hemminger (1):
> net/bnxt: use prefix on global function
>
> Tal Shnaiderman (1):
> eal/windows: fix default thread priority
>
> Thinh Tran (1):
> test: fix autotest handling of skipped tests
>
> Thomas Monjalon (8):
> eal: fix comment of OS-specific header files
> buildtools: fix build with busybox
> build: detect execinfo library on Linux
> examples/bbdev: fix header include for musl
> app: fix exit messages
> doc: fix names of UIO drivers
> doc: fix build with Sphinx 4
> drivers/net: check process type in close operation
>
> Tianyu Li (1):
> net/memif: fix Tx bps statistics for zero-copy
>
> Tyler Retzlaff (1):
> eal: add C++ include guard for reciprocal header
>
> Vadim Podovinnikov (1):
> net/bonding: fix LACP system address check
>
> Venkat Duvvuru (1):
> net/bnxt: fix queues per VNIC
>
> Viacheslav Ovsiienko (8):
> net/mlx5: fix metadata item validation for ingress flows
> net/mlx5: fix Rx metadata leftovers
> net/mlx4: fix RSS action with null hash key
> app/testpmd: fix segment number check
> net/mlx5: remove drop queue function prototypes
> net/mlx4: fix buffer leakage on device close
> net/mlx5: fix probing device in legacy bonding mode
> net/mlx5: fix drop action for Direct Rules/Verbs
>
> Wenjun Wu (1):
> net/ice: check some functions return
>
> Wenwu Ma (1):
> net/ice: fix illegal access when removing MAC filter
>
> Xiao Wang (1):
> vdpa/ifc: check PCI config read
>
> Xiaoyu Min (1):
> net/mlx5: support RSS expansion for IPv6 GRE
>
> Xiaoyun Li (2):
> app/testpmd: remove unnecessary UDP tunnel check
> net/i40e: fix IPv4 fragment offload
>
> Xueming Li (1):
> net/virtio: fix vectorized Rx queue rearm
>
> Youri Querry (1):
> bus/fslmc: fix random portal hangs with qbman 5.0
>
> Yunjian Wang (4):
> vfio: fix API description
> vfio: fix duplicated user mem map
> net/mlx4: fix leak when configured repeatedly
> net/mlx5: fix leak when configured repeatedly
next prev parent reply other threads:[~2021-06-17 17:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-17 6:38 Christian Ehrhardt
2021-06-17 17:46 ` Stokes, Ian [this message]
2021-06-24 11:05 ` Yu, PingX
2021-07-01 15:50 ` Ali Alnubani
2021-07-02 6:19 ` Christian Ehrhardt
2021-07-02 7:42 ` Christian Ehrhardt
2021-07-05 6:35 ` Ali Alnubani
2021-07-05 10:44 ` Ali Alnubani
2021-07-05 11:18 ` Christian Ehrhardt
2021-07-05 4:14 ` Pei Zhang
2021-07-05 5:24 ` Christian Ehrhardt
-- strict thread matches above, loose matches on Subject: below --
2021-07-05 13:23 Christian Ehrhardt
2021-07-06 2:45 ` Yu, PingX
2021-07-14 7:12 ` Jiang, YuX
2021-07-15 9:13 ` Ali Alnubani
2021-06-02 15:00 Christian Ehrhardt
2021-06-03 5:48 ` Christian Ehrhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d6c887cee2614dfdba9fa2b830131e22@intel.com \
--to=ian.stokes@intel.com \
--cc=Abhishek.Marathe@microsoft.com \
--cc=akhil.goyal@nxp.com \
--cc=alialnu@nvidia.com \
--cc=benjamin.walker@intel.com \
--cc=bluca@debian.org \
--cc=christian.ehrhardt@canonical.com \
--cc=dev@dpdk.org \
--cc=drc@linux.vnet.ibm.com \
--cc=hariprasad.govindharajan@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=juhlee@microsoft.com \
--cc=ktraynor@redhat.com \
--cc=pezhang@redhat.com \
--cc=pingx.yu@intel.com \
--cc=qian.q.xu@intel.com \
--cc=rasland@nvidia.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=yuan.peng@intel.com \
--cc=zhaoyan.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).