From: "Min Hu (Connor)" <humin29@huawei.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>,
Andrew Rybchenko <Andrew.Rybchenko@oktetlabs.ru>
Subject: Re: [dpdk-dev] [PATCH] examples/ethtool: fix pause configuration
Date: Tue, 28 Sep 2021 09:20:47 +0800 [thread overview]
Message-ID: <d935805a-fcd1-dd7e-29ee-b98591059b18@huawei.com> (raw)
In-Reply-To: <f00a70a3-bde8-3b86-24d9-1eb2e3c29438@huawei.com>
Hi, Ferruh,
any comments about this patch?
在 2021/7/17 10:15, Min Hu (Connor) 写道:
> Hi, all,
> any comments?
>
> 在 2021/6/28 10:17, Min Hu (Connor) 写道:
>> Hi, all,
>> any comments?
>>
>> 在 2021/4/28 16:42, Min Hu (Connor) 写道:
>>> From: Huisong Li <lihuisong@huawei.com>
>>>
>>> Currently, the pause command in ethtool to enable Rx/Tx pause has the
>>> following problem. Namely, Assume that the device supports flow control
>>> auto-negotiation to set pause parameters, which will the device that
>>> does
>>> not support flow control auto-negotiation fails to run this command.
>>>
>>> This patch supports the configuration of flow control auto-negotiation
>>> and fixes the print format and style of the pause cmd to make it more
>>> readable.
>>>
>>> Fixes: bda68ab9d1e7 ("examples/ethtool: add user-space ethtool sample
>>> application")
>>>
>>> Signed-off-by: Huisong Li <lihuisong@huawei.com>
>>> Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
>>> ---
>>> examples/ethtool/ethtool-app/ethapp.c | 59
>>> +++++++++++++++++++++--------------
>>> 1 file changed, 36 insertions(+), 23 deletions(-)
>>>
>>> diff --git a/examples/ethtool/ethtool-app/ethapp.c
>>> b/examples/ethtool/ethtool-app/ethapp.c
>>> index 36a1c37..057fa97 100644
>>> --- a/examples/ethtool/ethtool-app/ethapp.c
>>> +++ b/examples/ethtool/ethtool-app/ethapp.c
>>> @@ -49,6 +49,13 @@ struct pcmd_intintint_params {
>>> uint16_t rx;
>>> };
>>> +struct pcmd_pause_params {
>>> + cmdline_fixed_string_t cmd;
>>> + uint16_t port;
>>> + cmdline_fixed_string_t mode;
>>> + cmdline_fixed_string_t autoneg;
>>> + cmdline_fixed_string_t an_status;
>>> +};
>>> /* Parameter-less commands */
>>> cmdline_parse_token_string_t pcmd_quit_token_cmd =
>>> @@ -116,12 +123,18 @@ cmdline_parse_token_num_t
>>> pcmd_intintint_token_rx =
>>> /* Pause commands */
>>> cmdline_parse_token_string_t pcmd_pause_token_cmd =
>>> - TOKEN_STRING_INITIALIZER(struct pcmd_intstr_params, cmd, "pause");
>>> + TOKEN_STRING_INITIALIZER(struct pcmd_pause_params, cmd, "pause");
>>> cmdline_parse_token_num_t pcmd_pause_token_port =
>>> - TOKEN_NUM_INITIALIZER(struct pcmd_intstr_params, port, RTE_UINT16);
>>> -cmdline_parse_token_string_t pcmd_pause_token_opt =
>>> - TOKEN_STRING_INITIALIZER(struct pcmd_intstr_params,
>>> - opt, "all#tx#rx#none");
>>> + TOKEN_NUM_INITIALIZER(struct pcmd_pause_params, port, RTE_UINT16);
>>> +cmdline_parse_token_string_t pcmd_pause_token_mode =
>>> + TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
>>> + mode, "full#tx#rx#none");
>>> +cmdline_parse_token_string_t pcmd_pause_token_autoneg =
>>> + TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
>>> + autoneg, "autoneg");
>>> +cmdline_parse_token_string_t pcmd_pause_token_an_status =
>>> + TOKEN_STRING_INITIALIZER(struct pcmd_pause_params,
>>> + an_status, "on#off");
>>> /* VLAN commands */
>>> cmdline_parse_token_string_t pcmd_vlan_token_cmd =
>>> @@ -348,13 +361,12 @@ pcmd_module_eeprom_callback(void *ptr_params,
>>> fclose(fp_eeprom);
>>> }
>>> -
>>> static void
>>> pcmd_pause_callback(void *ptr_params,
>>> __rte_unused struct cmdline *ctx,
>>> void *ptr_data)
>>> {
>>> - struct pcmd_intstr_params *params = ptr_params;
>>> + struct pcmd_pause_params *params = ptr_params;
>>> struct ethtool_pauseparam info;
>>> int stat;
>>> @@ -366,39 +378,38 @@ pcmd_pause_callback(void *ptr_params,
>>> stat = rte_ethtool_get_pauseparam(params->port, &info);
>>> } else {
>>> memset(&info, 0, sizeof(info));
>>> - if (strcasecmp("all", params->opt) == 0) {
>>> + if (strcasecmp("full", params->mode) == 0) {
>>> info.tx_pause = 1;
>>> info.rx_pause = 1;
>>> - } else if (strcasecmp("tx", params->opt) == 0) {
>>> + } else if (strcasecmp("tx", params->mode) == 0) {
>>> info.tx_pause = 1;
>>> info.rx_pause = 0;
>>> - } else if (strcasecmp("rx", params->opt) == 0) {
>>> + } else if (strcasecmp("rx", params->mode) == 0) {
>>> info.tx_pause = 0;
>>> info.rx_pause = 1;
>>> } else {
>>> info.tx_pause = 0;
>>> info.rx_pause = 0;
>>> }
>>> - /* Assume auto-negotiation wanted */
>>> - info.autoneg = 1;
>>> +
>>> + if (strcasecmp("on", params->an_status) == 0)
>>> + info.autoneg = 1;
>>> + else
>>> + info.autoneg = 0;
>>> +
>>> stat = rte_ethtool_set_pauseparam(params->port, &info);
>>> }
>>> if (stat == 0) {
>>> - if (info.rx_pause && info.tx_pause)
>>> - printf("Port %i: Tx & Rx Paused\n", params->port);
>>> - else if (info.rx_pause)
>>> - printf("Port %i: Rx Paused\n", params->port);
>>> - else if (info.tx_pause)
>>> - printf("Port %i: Tx Paused\n", params->port);
>>> - else
>>> - printf("Port %i: Tx & Rx not paused\n", params->port);
>>> + printf("Pause parameters for Port %i:\n", params->port);
>>> + printf("Rx pause: %s\n", info.rx_pause ? "on" : "off");
>>> + printf("Tx pause: %s\n", info.tx_pause ? "on" : "off");
>>> + printf("Autoneg: %s\n", info.autoneg ? "on" : "off");
>>> } else if (stat == -ENOTSUP)
>>> printf("Port %i: Operation not supported\n", params->port);
>>> else
>>> printf("Port %i: Error %i\n", params->port, stat);
>>> }
>>> -
>>> static void
>>> pcmd_open_callback(__rte_unused void *ptr_params,
>>> __rte_unused struct cmdline *ctx,
>>> @@ -741,11 +752,13 @@ cmdline_parse_inst_t pcmd_pause = {
>>> .f = pcmd_pause_callback,
>>> .data = NULL,
>>> .help_str =
>>> - "pause <port_id> <all|tx|rx|none>\n Pause/unpause port",
>>> + "pause <port_id> <full|tx|rx|none> autoneg <on|off>\n
>>> Pause/unpause port",
>>> .tokens = {
>>> (void *)&pcmd_pause_token_cmd,
>>> (void *)&pcmd_pause_token_port,
>>> - (void *)&pcmd_pause_token_opt,
>>> + (void *)&pcmd_pause_token_mode,
>>> + (void *)&pcmd_pause_token_autoneg,
>>> + (void *)&pcmd_pause_token_an_status,
>>> NULL
>>> },
>>> };
>>>
>> .
> .
next prev parent reply other threads:[~2021-09-28 1:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-28 8:42 Min Hu (Connor)
2021-06-28 2:17 ` Min Hu (Connor)
2021-07-17 2:15 ` Min Hu (Connor)
2021-09-28 1:20 ` Min Hu (Connor) [this message]
2023-07-03 23:19 ` Stephen Hemminger
2023-11-10 3:30 ` [PATCH v2] " Huisong Li
2023-11-22 22:50 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d935805a-fcd1-dd7e-29ee-b98591059b18@huawei.com \
--to=humin29@huawei.com \
--cc=Andrew.Rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).