Re: [dpdk-dev] [PATCH v2 01/22] event/dlb2: add documentation and meson build infrastructure

["Kinsella, Ray" <mdr@ashroe.eu>]

On 17/10/2020 19:20, Timothy McDaniel wrote:
> Adds the meson build infrastructure, which includes
> compile-time constants in rte_config.h. DLB2 is
> only supported on Linux X86 platforms at this time.
> 
> Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
> Reviewed-by: Gage Eads <gage.eads@intel.com>
> ---
>  config/rte_config.h                               |   7 +
>  doc/guides/eventdevs/dlb2.rst                     | 330 ++++++++++++++++++++++
>  doc/guides/eventdevs/index.rst                    |   1 +
>  drivers/event/dlb2/meson.build                    |   7 +
>  drivers/event/dlb2/rte_pmd_dlb2_event_version.map |   3 +
>  drivers/event/meson.build                         |   3 +
>  6 files changed, 351 insertions(+)
>  create mode 100644 doc/guides/eventdevs/dlb2.rst
>  create mode 100644 drivers/event/dlb2/meson.build
>  create mode 100644 drivers/event/dlb2/rte_pmd_dlb2_event_version.map
> 
> diff --git a/config/rte_config.h b/config/rte_config.h
> index 0bae630..fd1b3c3 100644
> --- a/config/rte_config.h
> +++ b/config/rte_config.h
> @@ -131,4 +131,11 @@
>  /* QEDE PMD defines */
>  #define RTE_LIBRTE_QEDE_FW ""
>  
> +/* DLB2 defines */
> +#define RTE_LIBRTE_PMD_DLB2_POLL_INTERVAL 1000
> +#define RTE_LIBRTE_PMD_DLB2_UMWAIT_CTL_STATE  0
> +#undef RTE_LIBRTE_PMD_DLB2_QUELL_STATS
> +#define RTE_LIBRTE_PMD_DLB2_SW_CREDIT_QUANTA 32
> +#define RTE_PMD_DLB2_DEFAULT_DEPTH_THRESH 256
> +
>  #endif /* _RTE_CONFIG_H_ */
> diff --git a/doc/guides/eventdevs/dlb2.rst b/doc/guides/eventdevs/dlb2.rst
> new file mode 100644
> index 0000000..fa8d6dd
> --- /dev/null
> +++ b/doc/guides/eventdevs/dlb2.rst
> @@ -0,0 +1,330 @@
> +..  SPDX-License-Identifier: BSD-3-Clause
> +    Copyright(c) 2020 Intel Corporation.
> +
> +Driver for the Intel® Dynamic Load Balancer (DLB2)
> +==================================================
> +
> +The DPDK dlb poll mode driver supports the Intel® Dynamic Load Balancer.
> +
> +Prerequisites
> +-------------
> +
> +Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
> +the basic DPDK environment.
> +
> +Configuration
> +-------------
> +
> +The DLB2 PF PMD is a user-space PMD that uses VFIO to gain direct
> +device access. To use this operation mode, the PCIe PF device must be bound
> +to a DPDK-compatible VFIO driver, such as vfio-pci.
> +
> +Eventdev API Notes
> +------------------
> +
> +The DLB2 provides the functions of a DPDK event device; specifically, it
> +supports atomic, ordered, and parallel scheduling events from queues to ports.
> +However, the DLB2 hardware is not a perfect match to the eventdev API. Some DLB2
> +features are abstracted by the PMD such as directed ports.
> +
> +In general the dlb PMD is designed for ease-of-use and does not require a
> +detailed understanding of the hardware, but these details are important when
> +writing high-performance code. This section describes the places where the
> +eventdev API and DLB2 misalign.
> +
> +Scheduling Domain Configuration
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +There are 32 scheduling domainis the DLB2.
> +When one is configured, it allocates load-balanced and
> +directed queues, ports, credits, and other hardware resources. Some
> +resource allocations are user-controlled -- the number of queues, for example
> +-- and others, like credit pools (one directed and one load-balanced pool per
> +scheduling domain), are not.
> +
> +The DLB2 is a closed system eventdev, and as such the ``nb_events_limit`` device
> +setup argument and the per-port ``new_event_threshold`` argument apply as
> +defined in the eventdev header file. The limit is applied to all enqueues,
> +regardless of whether it will consume a directed or load-balanced credit.
> +
> +Load-balanced and Directed Ports
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +DLB2 ports come in two flavors: load-balanced and directed. The eventdev API
> +does not have the same concept, but it has a similar one: ports and queues that
> +are singly-linked (i.e. linked to a single queue or port, respectively).
> +
> +The ``rte_event_dev_info_get()`` function reports the number of available
> +event ports and queues (among other things). For the DLB2 PMD, max_event_ports
> +and max_event_queues report the number of available load-balanced ports and
> +queues, and max_single_link_event_port_queue_pairs reports the number of
> +available directed ports and queues.
> +
> +When a scheduling domain is created in ``rte_event_dev_configure()``, the user
> +specifies ``nb_event_ports`` and ``nb_single_link_event_port_queues``, which
> +control the total number of ports (load-balanced and directed) and the number
> +of directed ports. Hence, the number of requested load-balanced ports is
> +``nb_event_ports - nb_single_link_event_ports``. The ``nb_event_queues`` field
> +specifies the total number of queues (load-balanced and directed). The number
> +of directed queues comes from ``nb_single_link_event_port_queues``, since
> +directed ports and queues come in pairs.
> +
> +When a port is setup, the ``RTE_EVENT_PORT_CFG_SINGLE_LINK`` flag determines
> +whether it should be configured as a directed (the flag is set) or a
> +load-balanced (the flag is unset) port. Similarly, the
> +``RTE_EVENT_QUEUE_CFG_SINGLE_LINK`` queue configuration flag controls
> +whether it is a directed or load-balanced queue.
> +
> +Load-balanced ports can only be linked to load-balanced queues, and directed
> +ports can only be linked to directed queues. Furthermore, directed ports can
> +only be linked to a single directed queue (and vice versa), and that link
> +cannot change after the eventdev is started.
> +
> +The eventdev API does not have a directed scheduling type. To support directed
> +traffic, the dlb PMD detects when an event is being sent to a directed queue
> +and overrides its scheduling type. Note that the originally selected scheduling
> +type (atomic, ordered, or parallel) is not preserved, and an event's sched_type
> +will be set to ``RTE_SCHED_TYPE_ATOMIC`` when it is dequeued from a directed
> +port.
> +
> +Flow ID
> +~~~~~~~
> +
> +The flow ID field is preserved in the event when it is scheduled in the
> +DLB2.
> +
> +Hardware Credits
> +~~~~~~~~~~~~~~~~
> +
> +DLB2 uses a hardware credit scheme to prevent software from overflowing hardware
> +event storage, with each unit of storage represented by a credit. A port spends
> +a credit to enqueue an event, and hardware refills the ports with credits as the
> +events are scheduled to ports. Refills come from credit pools, and each port is
> +a member of a load-balanced credit pool and a directed credit pool. The
> +load-balanced credits are used to enqueue to load-balanced queues, and directed
> +credits are used for directed queues.
> +
> +A DLB2 eventdev contains one load-balanced and one directed credit pool. These
> +pools' sizes are controlled by the nb_events_limit field in struct
> +rte_event_dev_config. The load-balanced pool is sized to contain
> +nb_events_limit credits, and the directed pool is sized to contain
> +nb_events_limit/4 credits. The directed pool size can be overridden with the
> +num_dir_credits vdev argument, like so:
> +
> +    .. code-block:: console
> +
> +       --vdev=dlb1_event,num_dir_credits=<value>
> +
> +This can be used if the default allocation is too low or too high for the
> +specific application needs. The PMD also supports a vdev arg that limits the
> +max_num_events reported by rte_event_dev_info_get():
> +
> +    .. code-block:: console
> +
> +       --vdev=dlb1_event,max_num_events=<value>
> +
> +By default, max_num_events is reported as the total available load-balanced
> +credits. If multiple DLB2-based applications are being used, it may be desirable
> +to control how many load-balanced credits each application uses, particularly
> +when application(s) are written to configure nb_events_limit equal to the
> +reported max_num_events.
> +
> +Each port is a member of both credit pools. A port's credit allocation is
> +defined by its low watermark, high watermark, and refill quanta. These three
> +parameters are calculated by the dlb PMD like so:
> +
> +- The load-balanced high watermark is set to the port's enqueue_depth.
> +  The directed high watermark is set to the minimum of the enqueue_depth and
> +  the directed pool size divided by the total number of ports.
> +- The refill quanta is set to half the high watermark.
> +- The low watermark is set to the minimum of 16 and the refill quanta.
> +
> +When the eventdev is started, each port is pre-allocated a high watermark's
> +worth of credits. For example, if an eventdev contains four ports with enqueue
> +depths of 32 and a load-balanced credit pool size of 4096, each port will start
> +with 32 load-balanced credits, and there will be 3968 credits available to
> +replenish the ports. Thus, a single port is not capable of enqueueing up to the
> +nb_events_limit (without any events being dequeued), since the other ports are
> +retaining their initial credit allocation; in short, all ports must enqueue in
> +order to reach the limit.
> +
> +If a port attempts to enqueue and has no credits available, the enqueue
> +operation will fail and the application must retry the enqueue. Credits are
> +replenished asynchronously by the DLB2 hardware.
> +
> +Software Credits
> +~~~~~~~~~~~~~~~~
> +
> +The DLB2 is a "closed system" event dev, and the DLB2 PMD layers a software
> +credit scheme on top of the hardware credit scheme in order to comply with
> +the per-port backpressure described in the eventdev API.
> +
> +The DLB2's hardware scheme is local to a queue/pipeline stage: a port spends a
> +credit when it enqueues to a queue, and credits are later replenished after the
> +events are dequeued and released.
> +
> +In the software credit scheme, a credit is consumed when a new (.op =
> +RTE_EVENT_OP_NEW) event is injected into the system, and the credit is
> +replenished when the event is released from the system (either explicitly with
> +RTE_EVENT_OP_RELEASE or implicitly in dequeue_burst()).
> +
> +In this model, an event is "in the system" from its first enqueue into eventdev
> +until it is last dequeued. If the event goes through multiple event queues, it
> +is still considered "in the system" while a worker thread is processing it.
> +
> +A port will fail to enqueue if the number of events in the system exceeds its
> +``new_event_threshold`` (specified at port setup time). A port will also fail
> +to enqueue if it lacks enough hardware credits to enqueue; load-balanced
> +credits are used to enqueue to a load-balanced queue, and directed credits are
> +used to enqueue to a directed queue.
> +
> +The out-of-credit situations are typically transient, and an eventdev
> +application using the DLB2 ought to retry its enqueues if they fail.
> +If enqueue fails, DLB2 PMD sets rte_errno as follows:
> +
> +- -ENOSPC: Credit exhaustion (either hardware or software)
> +- -EINVAL: Invalid argument, such as port ID, queue ID, or sched_type.
> +
> +Depending on the pipeline the application has constructed, it's possible to
> +enter a credit deadlock scenario wherein the worker thread lacks the credit
> +to enqueue an event, and it must dequeue an event before it can recover the
> +credit. If the worker thread retries its enqueue indefinitely, it will not
> +make forward progress. Such deadlock is possible if the application has event
> +"loops", in which an event in dequeued from queue A and later enqueued back to
> +queue A.
> +
> +Due to this, workers should stop retrying after a time, release the events it
> +is attempting to enqueue, and dequeue more events. It is important that the
> +worker release the events and don't simply set them aside to retry the enqueue
> +again later, because the port has limited history list size (by default, twice
> +the port's dequeue_depth).
> +
> +Priority
> +~~~~~~~~
> +
> +The DLB2 supports event priority and per-port queue service priority, as
> +described in the eventdev header file. The DLB2 does not support 'global' event
> +queue priority established at queue creation time.
> +
> +DLB2 supports 8 event and queue service priority levels. For both priority
> +types, the PMD uses the upper three bits of the priority field to determine the
> +DLB2 priority, discarding the 5 least significant bits. The 5 least significant
> +event priority bits are not preserved when an event is enqueued.
> +
> +Load-Balanced Queues
> +~~~~~~~~~~~~~~~~~~~~
> +
> +A load-balanced queue can support atomic and ordered scheduling, or atomic and
> +unordered scheduling, but not atomic and unordered and ordered scheduling. A
> +queue's scheduling types are controlled by the event queue configuration.
> +
> +If the user sets the ``RTE_EVENT_QUEUE_CFG_ALL_TYPES`` flag, the
> +``nb_atomic_order_sequences`` determines the supported scheduling types.
> +With non-zero ``nb_atomic_order_sequences``, the queue is configured for atomic
> +and ordered scheduling. In this case, ``RTE_SCHED_TYPE_PARALLEL`` scheduling is
> +supported by scheduling those events as ordered events.  Note that when the
> +event is dequeued, its sched_type will be ``RTE_SCHED_TYPE_ORDERED``. Else if
> +``nb_atomic_order_sequences`` is zero, the queue is configured for atomic and
> +unordered scheduling. In this case, ``RTE_SCHED_TYPE_ORDERED`` is unsupported.
> +
> +If the ``RTE_EVENT_QUEUE_CFG_ALL_TYPES`` flag is not set, schedule_type
> +dictates the queue's scheduling type.
> +
> +The ``nb_atomic_order_sequences`` queue configuration field sets the ordered
> +queue's reorder buffer size.  DLB2 has 4 groups of ordered queues, where each
> +group is configured to contain either 1 queue with 1024 reorder entries, 2
> +queues with 512 reorder entries, and so on down to 32 queues with 32 entries.
> +
> +When a load-balanced queue is created, the PMD will configure a new sequence
> +number group on-demand if num_sequence_numbers does not match a pre-existing
> +group with available reorder buffer entries. If all sequence number groups are
> +in use, no new group will be created and queue configuration will fail. (Note
> +that when the PMD is used with a virtual DLB2 device, it cannot change the
> +sequence number configuration.)
> +
> +The queue's ``nb_atomic_flows`` parameter is ignored by the DLB2 PMD, because
> +the DLB2 does not limit the number of flows a queue can track. In the DLB2, all
> +load-balanced queues can use the full 16-bit flow ID range.
> +
> +Reconfiguration
> +~~~~~~~~~~~~~~~
> +
> +The Eventdev API allows one to reconfigure a device, its ports, and its queues
> +by first stopping the device, calling the configuration function(s), then
> +restarting the device. The DLB2 does not support configuring an individual queue
> +or port without first reconfiguring the entire device, however, so there are
> +certain reconfiguration sequences that are valid in the eventdev API but not
> +supported by the PMD.
> +
> +Specifically, the PMD supports the following configuration sequence:
> +1. Configure and start the device
> +2. Stop the device
> +3. (Optional) Reconfigure the device
> +4. (Optional) If step 3 is run:
> +
> +   a. Setup queue(s). The reconfigured queue(s) lose their previous port links.
> +   b. The reconfigured port(s) lose their previous queue links.
> +
> +5. (Optional, only if steps 4a and 4b are run) Link port(s) to queue(s)
> +6. Restart the device. If the device is reconfigured in step 3 but one or more
> +   of its ports or queues are not, the PMD will apply their previous
> +   configuration (including port->queue links) at this time.
> +
> +The PMD does not support the following configuration sequences:
> +1. Configure and start the device
> +2. Stop the device
> +3. Setup queue or setup port
> +4. Start the device
> +
> +This sequence is not supported because the event device must be reconfigured
> +before its ports or queues can be.
> +
> +Deferred Scheduling
> +~~~~~~~~~~~~~~~~~~~
> +
> +The DLB2 PMD's default behavior for managing a CQ is to "pop" the CQ once per
> +dequeued event before returning from rte_event_dequeue_burst(). This frees the
> +corresponding entries in the CQ, which enables the DLB2 to schedule more events
> +to it.
> +
> +To support applications seeking finer-grained scheduling control -- for example
> +deferring scheduling to get the best possible priority scheduling and
> +load-balancing -- the PMD supports a deferred scheduling mode. In this mode,
> +the CQ entry is not popped until the *subsequent* rte_event_dequeue_burst()
> +call. This mode only applies to load-balanced event ports with dequeue depth of
> +1.
> +
> +To enable deferred scheduling, use the defer_sched vdev argument like so:
> +
> +    .. code-block:: console
> +
> +       --vdev=dlb1_event,defer_sched=on
> +
> +Atomic Inflights Allocation
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +In the last stage prior to scheduling an atomic event to a CQ, DLB2 holds the
> +inflight event in a temporary buffer that is divided among load-balanced
> +queues. If a queue's atomic buffer storage fills up, this can result in
> +head-of-line-blocking. For example:
> +
> +- An LDB queue allocated N atomic buffer entries
> +- All N entries are filled with events from flow X, which is pinned to CQ 0.
> +
> +Until CQ 0 releases 1+ events, no other atomic flows for that LDB queue can be
> +scheduled. The likelihood of this case depends on the eventdev configuration,
> +traffic behavior, event processing latency, potential for a worker to be
> +interrupted or otherwise delayed, etc.
> +
> +By default, the PMD allocates 16 buffer entries for each load-balanced queue,
> +which provides an even division across all 128 queues but potentially wastes
> +buffer space (e.g. if not all queues are used, or aren't used for atomic
> +scheduling).
> +
> +The PMD provides a dev arg to override the default per-queue allocation. To
> +increase a vdev's per-queue atomic-inflight allocation to (for example) 64:
> +
> +    .. code-block:: console
> +
> +       --vdev=dlb1_event,atm_inflights=64
> +
> diff --git a/doc/guides/eventdevs/index.rst b/doc/guides/eventdevs/index.rst
> index bb66a5e..55d5ba8 100644
> --- a/doc/guides/eventdevs/index.rst
> +++ b/doc/guides/eventdevs/index.rst
> @@ -18,3 +18,4 @@ application through the eventdev API.
>      octeontx
>      octeontx2
>      opdl
> +    dlb2
> diff --git a/drivers/event/dlb2/meson.build b/drivers/event/dlb2/meson.build
> new file mode 100644
> index 0000000..54ba2c8
> --- /dev/null
> +++ b/drivers/event/dlb2/meson.build
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2019-2020 Intel Corporation
> +
> +sources = files(
> +)
> +
> +deps += ['mbuf', 'mempool', 'ring', 'pci', 'bus_pci']
> diff --git a/drivers/event/dlb2/rte_pmd_dlb2_event_version.map b/drivers/event/dlb2/rte_pmd_dlb2_event_version.map
> new file mode 100644
> index 0000000..299ae63
> --- /dev/null
> +++ b/drivers/event/dlb2/rte_pmd_dlb2_event_version.map
> @@ -0,0 +1,3 @@
> +DPDK_21.0 {

Should be DPDK_21

> +	local: *;
> +};
> diff --git a/drivers/event/meson.build b/drivers/event/meson.build
> index ebe76a7..01d3b59 100644
> --- a/drivers/event/meson.build
> +++ b/drivers/event/meson.build
> @@ -10,6 +10,9 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
>  	dpdk_conf.has('RTE_ARCH_ARM64'))
>  	drivers += 'octeontx'
>  endif
> +if (dpdk_conf.has('RTE_ARCH_X86_64') and is_linux)
> +        drivers += 'dlb2'
> +endif
>  std_deps = ['eventdev', 'kvargs']
>  config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
>  driver_name_fmt = 'rte_pmd_@0@_event'
>