* [PATCH] examples/l3fwd: add option to set RX burst size
@ 2024-10-12 8:40 Jie Hai
2024-10-12 9:06 ` fengchengwen
` (5 more replies)
0 siblings, 6 replies; 20+ messages in thread
From: Jie Hai @ 2024-10-12 8:40 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
parameter needs to be modified in some performance optimization
scenarios. So an option '--burst' is added to set the burst size
explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
value is MAX_PKT_BURST (512).
Signed-off-by: Jie Hai <haijie1@huawei.com>
---
examples/l3fwd/l3fwd.h | 5 +++-
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm.c | 2 +-
examples/l3fwd/main.c | 58 ++++++++++++++++++++++++++++++++++++--
6 files changed, 64 insertions(+), 7 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 93ce652d02b7..3ebee6301295 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -23,7 +23,8 @@
#define RX_DESC_DEFAULT 1024
#define TX_DESC_DEFAULT 1024
-#define MAX_PKT_BURST 32
+#define DEFAULT_PKT_BURST 32
+#define MAX_PKT_BURST 512
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
#define MEMPOOL_CACHE_SIZE 256
@@ -115,6 +116,8 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
+extern uint32_t nb_pkt_per_burst;
+
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index b635011ef708..ccb9946837ed 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1119,7 +1119,7 @@ acl_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid,
- pkts_burst, MAX_PKT_BURST);
+ pkts_burst, nb_pkt_per_burst);
if (nb_rx > 0) {
acl_process_pkts(pkts_burst, hops, nb_rx,
diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index 31a7e05e39d0..da9c45e3a482 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -644,7 +644,7 @@ em_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
index f38b19af3f57..aa81b12fe7dc 100644
--- a/examples/l3fwd/l3fwd_fib.c
+++ b/examples/l3fwd/l3fwd_fib.c
@@ -239,7 +239,7 @@ fib_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index e8fd95aae9ce..048c02491378 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -205,7 +205,7 @@ lpm_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 01b763e5ba11..ba0a7f7088f0 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -55,6 +55,7 @@
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
+uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
@@ -395,6 +396,7 @@ print_usage(const char *prgname)
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--rx-queue-size NPKTS]"
" [--tx-queue-size NPKTS]"
+ " [--burst NPKTS]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
" [--max-pkt-len PKTLEN]"
" [--no-numa]"
@@ -420,6 +422,8 @@ print_usage(const char *prgname)
" Default: %d\n"
" --tx-queue-size NPKTS: Tx queue size in decimal\n"
" Default: %d\n"
+ " --burst NPKTS: Burst size in decimal\n"
+ " Default: %d\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
@@ -449,7 +453,7 @@ print_usage(const char *prgname)
" another is route entry at while line leads with character '%c'.\n"
" --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
" --alg: ACL classify method to use, one of: %s.\n\n",
- prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT,
+ prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
}
@@ -667,6 +671,49 @@ parse_lookup(const char *optarg)
return 0;
}
+static void
+parse_pkt_burst(const char *optarg)
+{
+ struct rte_eth_dev_info dev_info;
+ uint16_t burst_size;
+ uint16_t pkt_burst;
+ char *end = NULL;
+ int ret;
+
+ /* parse decimal string */
+ pkt_burst = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+
+ if (pkt_burst > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "User provided burst must be <= %d. Using default value %d\n",
+ MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ } else if (pkt_burst > 0) {
+ nb_pkt_per_burst = pkt_burst;
+ return;
+ }
+
+ /* If user gives a value of zero, query the PMD for its recommended Rx burst size. */
+ ret = rte_eth_dev_info_get(0, &dev_info);
+ if (ret != 0)
+ return;
+ burst_size = dev_info.default_rxportconf.burst_size;
+ if (burst_size == 0) {
+ RTE_LOG(INFO, L3FWD, "PMD does not recommend a burst size. Using default value %d. "
+ "User provided value must be in [1, %d]\n",
+ nb_pkt_per_burst, MAX_PKT_BURST);
+ return;
+ } else if (burst_size > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "PMD recommended burst size %d exceeds maximum value %d. "
+ "Using default value %d\n",
+ burst_size, MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ }
+ nb_pkt_per_burst = burst_size;
+ RTE_LOG(INFO, L3FWD, "Using PMD-provided burst value %d\n", burst_size);
+}
+
#define MAX_JUMBO_PKT_LEN 9600
static const char short_options[] =
@@ -698,6 +745,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
+#define CMD_LINE_OPT_PKT_BURST "burst"
enum {
/* long options mapped to a short option */
@@ -726,7 +774,8 @@ enum {
CMD_LINE_OPT_LOOKUP_NUM,
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
- CMD_LINE_OPT_VECTOR_TMO_NS_NUM
+ CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
+ CMD_LINE_OPTPKT_BURST_NUM
};
static const struct option lgopts[] = {
@@ -753,6 +802,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_RULE_IPV4, 1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
+ {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPTPKT_BURST_NUM},
{NULL, 0, 0, 0}
};
@@ -841,6 +891,10 @@ parse_args(int argc, char **argv)
parse_queue_size(optarg, &nb_txd, 0);
break;
+ case CMD_LINE_OPTPKT_BURST_NUM:
+ parse_pkt_burst(optarg);
+ break;
+
case CMD_LINE_OPT_ETH_DEST_NUM:
parse_eth_dest(optarg);
break;
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] examples/l3fwd: add option to set RX burst size
2024-10-12 8:40 [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
@ 2024-10-12 9:06 ` fengchengwen
2024-10-12 12:22 ` Morten Brørup
` (4 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: fengchengwen @ 2024-10-12 9:06 UTC (permalink / raw)
To: Jie Hai, dev, thomas, ferruh.yigit; +Cc: lihuisong
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
On 2024/10/12 16:40, Jie Hai wrote:
> Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
> parameter needs to be modified in some performance optimization
> scenarios. So an option '--burst' is added to set the burst size
> explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
> value is MAX_PKT_BURST (512).
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH] examples/l3fwd: add option to set RX burst size
2024-10-12 8:40 [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-12 9:06 ` fengchengwen
@ 2024-10-12 12:22 ` Morten Brørup
2024-10-17 8:58 ` [PATCH v2 0/2] examples/l3fwd: add more options Jie Hai
` (3 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: Morten Brørup @ 2024-10-12 12:22 UTC (permalink / raw)
To: Jie Hai, dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen
> From: Jie Hai [mailto:haijie1@huawei.com]
> Sent: Saturday, 12 October 2024 10.41
>
> Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
> parameter needs to be modified in some performance optimization
> scenarios. So an option '--burst' is added to set the burst size
> explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
> value is MAX_PKT_BURST (512).
Good idea.
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> ---
>
> -#define MAX_PKT_BURST 32
> +#define DEFAULT_PKT_BURST 32
> +#define MAX_PKT_BURST 512
> #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
>
> #define MEMPOOL_CACHE_SIZE 256
It seems strange to use a burst size larger than the mempool cache size.
You might want to make the cache size configurable too, or simply define MEMPOOL_CACHE_SIZE as RTE_MEMPOOL_CACHE_MAX_SIZE (currently 512) instead of 256.
And, as a safety measure, consider adding:
#include <assert.h>
static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST);
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 0/2] examples/l3fwd: add more options
2024-10-12 8:40 [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-12 9:06 ` fengchengwen
2024-10-12 12:22 ` Morten Brørup
@ 2024-10-17 8:58 ` Jie Hai
2024-10-17 8:58 ` [PATCH v2 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
` (2 more replies)
2024-10-17 9:58 ` [PATCH v3 " Jie Hai
` (2 subsequent siblings)
5 siblings, 3 replies; 20+ messages in thread
From: Jie Hai @ 2024-10-17 8:58 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
Add options to support configuring RX burst size and cache size
of mbuf mempoool.
Jie Hai (2):
examples/l3fwd: add option to set RX burst size
examples/l3fwd: add option to set mbuf cache size
examples/l3fwd/l3fwd.h | 8 +++-
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm.c | 2 +-
examples/l3fwd/main.c | 89 ++++++++++++++++++++++++++++++++++++--
6 files changed, 96 insertions(+), 9 deletions(-)
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 1/2] examples/l3fwd: add option to set RX burst size
2024-10-17 8:58 ` [PATCH v2 0/2] examples/l3fwd: add more options Jie Hai
@ 2024-10-17 8:58 ` Jie Hai
2024-10-17 9:37 ` lihuisong (C)
2024-10-17 8:58 ` [PATCH v2 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
2024-10-17 9:18 ` [PATCH v2 0/2] examples/l3fwd: add more options Morten Brørup
2 siblings, 1 reply; 20+ messages in thread
From: Jie Hai @ 2024-10-17 8:58 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
parameter needs to be modified in some performance optimization
scenarios. So an option '--burst' is added to set the burst size
explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
value is MAX_PKT_BURST (512).
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
---
examples/l3fwd/l3fwd.h | 7 +++--
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm.c | 2 +-
examples/l3fwd/main.c | 60 ++++++++++++++++++++++++++++++++++++--
6 files changed, 67 insertions(+), 8 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 93ce652d02b7..618e0eaa3af1 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -23,10 +23,11 @@
#define RX_DESC_DEFAULT 1024
#define TX_DESC_DEFAULT 1024
-#define MAX_PKT_BURST 32
+#define DEFAULT_PKT_BURST 32
+#define MAX_PKT_BURST 512
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
-#define MEMPOOL_CACHE_SIZE 256
+#define MEMPOOL_CACHE_SIZE RTE_MEMPOOL_CACHE_MAX_SIZE
#define MAX_RX_QUEUE_PER_LCORE 16
#define VECTOR_SIZE_DEFAULT MAX_PKT_BURST
@@ -115,6 +116,8 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
+extern uint32_t nb_pkt_per_burst;
+
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index b635011ef708..ccb9946837ed 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1119,7 +1119,7 @@ acl_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid,
- pkts_burst, MAX_PKT_BURST);
+ pkts_burst, nb_pkt_per_burst);
if (nb_rx > 0) {
acl_process_pkts(pkts_burst, hops, nb_rx,
diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index 31a7e05e39d0..da9c45e3a482 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -644,7 +644,7 @@ em_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
index f38b19af3f57..aa81b12fe7dc 100644
--- a/examples/l3fwd/l3fwd_fib.c
+++ b/examples/l3fwd/l3fwd_fib.c
@@ -239,7 +239,7 @@ fib_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index e8fd95aae9ce..048c02491378 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -205,7 +205,7 @@ lpm_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 01b763e5ba11..2feae5b311a2 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -14,6 +14,7 @@
#include <getopt.h>
#include <signal.h>
#include <stdbool.h>
+#include <assert.h>
#include <rte_common.h>
#include <rte_vect.h>
@@ -53,8 +54,10 @@
#define MAX_LCORE_PARAMS 1024
+static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST);
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
+uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
@@ -395,6 +398,7 @@ print_usage(const char *prgname)
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--rx-queue-size NPKTS]"
" [--tx-queue-size NPKTS]"
+ " [--burst NPKTS]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
" [--max-pkt-len PKTLEN]"
" [--no-numa]"
@@ -420,6 +424,8 @@ print_usage(const char *prgname)
" Default: %d\n"
" --tx-queue-size NPKTS: Tx queue size in decimal\n"
" Default: %d\n"
+ " --burst NPKTS: Burst size in decimal\n"
+ " Default: %d\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
@@ -449,7 +455,7 @@ print_usage(const char *prgname)
" another is route entry at while line leads with character '%c'.\n"
" --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
" --alg: ACL classify method to use, one of: %s.\n\n",
- prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT,
+ prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
}
@@ -667,6 +673,49 @@ parse_lookup(const char *optarg)
return 0;
}
+static void
+parse_pkt_burst(const char *optarg)
+{
+ struct rte_eth_dev_info dev_info;
+ unsigned long pkt_burst;
+ uint16_t burst_size;
+ char *end = NULL;
+ int ret;
+
+ /* parse decimal string */
+ pkt_burst = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+
+ if (pkt_burst > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "User provided burst must be <= %d. Using default value %d\n",
+ MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ } else if (pkt_burst > 0) {
+ nb_pkt_per_burst = (uint32_t)pkt_burst;
+ return;
+ }
+
+ /* If user gives a value of zero, query the PMD for its recommended Rx burst size. */
+ ret = rte_eth_dev_info_get(0, &dev_info);
+ if (ret != 0)
+ return;
+ burst_size = dev_info.default_rxportconf.burst_size;
+ if (burst_size == 0) {
+ RTE_LOG(INFO, L3FWD, "PMD does not recommend a burst size. Using default value %d. "
+ "User provided value must be in [1, %d]\n",
+ nb_pkt_per_burst, MAX_PKT_BURST);
+ return;
+ } else if (burst_size > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "PMD recommended burst size %d exceeds maximum value %d. "
+ "Using default value %d\n",
+ burst_size, MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ }
+ nb_pkt_per_burst = burst_size;
+ RTE_LOG(INFO, L3FWD, "Using PMD-provided burst value %d\n", burst_size);
+}
+
#define MAX_JUMBO_PKT_LEN 9600
static const char short_options[] =
@@ -698,6 +747,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
+#define CMD_LINE_OPT_PKT_BURST "burst"
enum {
/* long options mapped to a short option */
@@ -726,7 +776,8 @@ enum {
CMD_LINE_OPT_LOOKUP_NUM,
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
- CMD_LINE_OPT_VECTOR_TMO_NS_NUM
+ CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
+ CMD_LINE_OPT_PKT_BURST_NUM
};
static const struct option lgopts[] = {
@@ -753,6 +804,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_RULE_IPV4, 1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
+ {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
{NULL, 0, 0, 0}
};
@@ -841,6 +893,10 @@ parse_args(int argc, char **argv)
parse_queue_size(optarg, &nb_txd, 0);
break;
+ case CMD_LINE_OPT_PKT_BURST_NUM:
+ parse_pkt_burst(optarg);
+ break;
+
case CMD_LINE_OPT_ETH_DEST_NUM:
parse_eth_dest(optarg);
break;
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 2/2] examples/l3fwd: add option to set mbuf cache size
2024-10-17 8:58 ` [PATCH v2 0/2] examples/l3fwd: add more options Jie Hai
2024-10-17 8:58 ` [PATCH v2 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
@ 2024-10-17 8:58 ` Jie Hai
2024-10-17 9:40 ` lihuisong (C)
2024-10-17 9:18 ` [PATCH v2 0/2] examples/l3fwd: add more options Morten Brørup
2 siblings, 1 reply; 20+ messages in thread
From: Jie Hai @ 2024-10-17 8:58 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
The mempool cache size of mbuf is set to
RTE_MEMPOOL_CACHE_MAX_SIZE as default. This patch allows
users to configure the cache size by "--mbcache", and limits
the paramater to a maximum of RTE_MEMPOOL_CACHE_MAX_SIZE.
Signed-off-by: Jie Hai <haijie1@huawei.com>
---
examples/l3fwd/l3fwd.h | 1 +
examples/l3fwd/main.c | 33 ++++++++++++++++++++++++++++++---
2 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 618e0eaa3af1..0cce3406ee7d 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -117,6 +117,7 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
extern uint32_t nb_pkt_per_burst;
+extern uint32_t mb_mempool_cache_size;
/* Send burst of packets on an output interface */
static inline int
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 2feae5b311a2..1e2da739dded 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -58,6 +58,7 @@ static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST);
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
+uint32_t mb_mempool_cache_size = MEMPOOL_CACHE_SIZE;
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
@@ -399,6 +400,7 @@ print_usage(const char *prgname)
" [--rx-queue-size NPKTS]"
" [--tx-queue-size NPKTS]"
" [--burst NPKTS]"
+ " [--mbcache CACHESZ]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
" [--max-pkt-len PKTLEN]"
" [--no-numa]"
@@ -426,6 +428,8 @@ print_usage(const char *prgname)
" Default: %d\n"
" --burst NPKTS: Burst size in decimal\n"
" Default: %d\n"
+ " --mbcache CACHESZ: Cache size in decimal\n"
+ " Default: %d\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
@@ -455,7 +459,7 @@ print_usage(const char *prgname)
" another is route entry at while line leads with character '%c'.\n"
" --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
" --alg: ACL classify method to use, one of: %s.\n\n",
- prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
+ prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST, MEMPOOL_CACHE_SIZE,
ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
}
@@ -673,6 +677,22 @@ parse_lookup(const char *optarg)
return 0;
}
+static void
+parse_mbcache_size(const char *optarg)
+{
+ unsigned long mb_cache_size;
+ char *end = NULL;
+
+ mb_cache_size = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+ if (mb_cache_size <= RTE_MEMPOOL_CACHE_MAX_SIZE)
+ mb_mempool_cache_size = (uint32_t)mb_cache_size;
+ else
+ rte_exit(EXIT_FAILURE, "mbcache must be >= 0 and <= %d\n",
+ RTE_MEMPOOL_CACHE_MAX_SIZE);
+}
+
static void
parse_pkt_burst(const char *optarg)
{
@@ -748,6 +768,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
#define CMD_LINE_OPT_PKT_BURST "burst"
+#define CMD_LINE_OPT_MB_CACHE_SIZE "mbcache"
enum {
/* long options mapped to a short option */
@@ -777,7 +798,8 @@ enum {
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
- CMD_LINE_OPT_PKT_BURST_NUM
+ CMD_LINE_OPT_PKT_BURST_NUM,
+ CMD_LINE_OPT_MB_CACHE_SIZE_NUM
};
static const struct option lgopts[] = {
@@ -805,6 +827,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
{CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
+ {CMD_LINE_OPT_MB_CACHE_SIZE, 1, 0, CMD_LINE_OPT_MB_CACHE_SIZE_NUM},
{NULL, 0, 0, 0}
};
@@ -897,6 +920,10 @@ parse_args(int argc, char **argv)
parse_pkt_burst(optarg);
break;
+ case CMD_LINE_OPT_MB_CACHE_SIZE_NUM:
+ parse_mbcache_size(optarg);
+ break;
+
case CMD_LINE_OPT_ETH_DEST_NUM:
parse_eth_dest(optarg);
break;
@@ -1089,7 +1116,7 @@ init_mem(uint16_t portid, unsigned int nb_mbuf)
portid, socketid);
pktmbuf_pool[portid][socketid] =
rte_pktmbuf_pool_create(s, nb_mbuf,
- MEMPOOL_CACHE_SIZE, 0,
+ mb_mempool_cache_size, 0,
RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (pktmbuf_pool[portid][socketid] == NULL)
rte_exit(EXIT_FAILURE,
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH v2 0/2] examples/l3fwd: add more options
2024-10-17 8:58 ` [PATCH v2 0/2] examples/l3fwd: add more options Jie Hai
2024-10-17 8:58 ` [PATCH v2 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-17 8:58 ` [PATCH v2 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
@ 2024-10-17 9:18 ` Morten Brørup
2 siblings, 0 replies; 20+ messages in thread
From: Morten Brørup @ 2024-10-17 9:18 UTC (permalink / raw)
To: Jie Hai, dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen
For the series,
Acked-by: Morten Brørup <mb@smartsharesystems.com>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 1/2] examples/l3fwd: add option to set RX burst size
2024-10-17 8:58 ` [PATCH v2 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
@ 2024-10-17 9:37 ` lihuisong (C)
0 siblings, 0 replies; 20+ messages in thread
From: lihuisong (C) @ 2024-10-17 9:37 UTC (permalink / raw)
To: Jie Hai, dev; +Cc: fengchengwen, thomas, ferruh.yigit
Acked-by: Huisong Li <lihuisong@huawei.com>
在 2024/10/17 16:58, Jie Hai 写道:
> Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
> parameter needs to be modified in some performance optimization
> scenarios. So an option '--burst' is added to set the burst size
> explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
> value is MAX_PKT_BURST (512).
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> Acked-by: Chengwen Feng <fengchengwen@huawei.com>
> ---
> examples/l3fwd/l3fwd.h | 7 +++--
> examples/l3fwd/l3fwd_acl.c | 2 +-
> examples/l3fwd/l3fwd_em.c | 2 +-
> examples/l3fwd/l3fwd_fib.c | 2 +-
> examples/l3fwd/l3fwd_lpm.c | 2 +-
> examples/l3fwd/main.c | 60 ++++++++++++++++++++++++++++++++++++--
> 6 files changed, 67 insertions(+), 8 deletions(-)
>
> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
> index 93ce652d02b7..618e0eaa3af1 100644
> --- a/examples/l3fwd/l3fwd.h
> +++ b/examples/l3fwd/l3fwd.h
> @@ -23,10 +23,11 @@
> #define RX_DESC_DEFAULT 1024
> #define TX_DESC_DEFAULT 1024
>
> -#define MAX_PKT_BURST 32
> +#define DEFAULT_PKT_BURST 32
> +#define MAX_PKT_BURST 512
> #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
>
> -#define MEMPOOL_CACHE_SIZE 256
> +#define MEMPOOL_CACHE_SIZE RTE_MEMPOOL_CACHE_MAX_SIZE
> #define MAX_RX_QUEUE_PER_LCORE 16
>
> #define VECTOR_SIZE_DEFAULT MAX_PKT_BURST
> @@ -115,6 +116,8 @@ extern struct acl_algorithms acl_alg[];
>
> extern uint32_t max_pkt_len;
>
> +extern uint32_t nb_pkt_per_burst;
> +
> /* Send burst of packets on an output interface */
> static inline int
> send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
> diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
> index b635011ef708..ccb9946837ed 100644
> --- a/examples/l3fwd/l3fwd_acl.c
> +++ b/examples/l3fwd/l3fwd_acl.c
> @@ -1119,7 +1119,7 @@ acl_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid,
> - pkts_burst, MAX_PKT_BURST);
> + pkts_burst, nb_pkt_per_burst);
>
> if (nb_rx > 0) {
> acl_process_pkts(pkts_burst, hops, nb_rx,
> diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
> index 31a7e05e39d0..da9c45e3a482 100644
> --- a/examples/l3fwd/l3fwd_em.c
> +++ b/examples/l3fwd/l3fwd_em.c
> @@ -644,7 +644,7 @@ em_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> - MAX_PKT_BURST);
> + nb_pkt_per_burst);
> if (nb_rx == 0)
> continue;
>
> diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
> index f38b19af3f57..aa81b12fe7dc 100644
> --- a/examples/l3fwd/l3fwd_fib.c
> +++ b/examples/l3fwd/l3fwd_fib.c
> @@ -239,7 +239,7 @@ fib_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> - MAX_PKT_BURST);
> + nb_pkt_per_burst);
> if (nb_rx == 0)
> continue;
>
> diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
> index e8fd95aae9ce..048c02491378 100644
> --- a/examples/l3fwd/l3fwd_lpm.c
> +++ b/examples/l3fwd/l3fwd_lpm.c
> @@ -205,7 +205,7 @@ lpm_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> - MAX_PKT_BURST);
> + nb_pkt_per_burst);
> if (nb_rx == 0)
> continue;
>
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index 01b763e5ba11..2feae5b311a2 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -14,6 +14,7 @@
> #include <getopt.h>
> #include <signal.h>
> #include <stdbool.h>
> +#include <assert.h>
>
> #include <rte_common.h>
> #include <rte_vect.h>
> @@ -53,8 +54,10 @@
>
> #define MAX_LCORE_PARAMS 1024
>
> +static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST);
> uint16_t nb_rxd = RX_DESC_DEFAULT;
> uint16_t nb_txd = TX_DESC_DEFAULT;
> +uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
>
> /**< Ports set in promiscuous mode off by default. */
> static int promiscuous_on;
> @@ -395,6 +398,7 @@ print_usage(const char *prgname)
> " --config (port,queue,lcore)[,(port,queue,lcore)]"
> " [--rx-queue-size NPKTS]"
> " [--tx-queue-size NPKTS]"
> + " [--burst NPKTS]"
> " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
> " [--max-pkt-len PKTLEN]"
> " [--no-numa]"
> @@ -420,6 +424,8 @@ print_usage(const char *prgname)
> " Default: %d\n"
> " --tx-queue-size NPKTS: Tx queue size in decimal\n"
> " Default: %d\n"
> + " --burst NPKTS: Burst size in decimal\n"
> + " Default: %d\n"
> " --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
> " --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
> " --no-numa: Disable numa awareness\n"
> @@ -449,7 +455,7 @@ print_usage(const char *prgname)
> " another is route entry at while line leads with character '%c'.\n"
> " --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
> " --alg: ACL classify method to use, one of: %s.\n\n",
> - prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT,
> + prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
> ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
> }
>
> @@ -667,6 +673,49 @@ parse_lookup(const char *optarg)
> return 0;
> }
>
> +static void
> +parse_pkt_burst(const char *optarg)
> +{
> + struct rte_eth_dev_info dev_info;
> + unsigned long pkt_burst;
> + uint16_t burst_size;
> + char *end = NULL;
> + int ret;
> +
> + /* parse decimal string */
> + pkt_burst = strtoul(optarg, &end, 10);
> + if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return;
> +
> + if (pkt_burst > MAX_PKT_BURST) {
> + RTE_LOG(INFO, L3FWD, "User provided burst must be <= %d. Using default value %d\n",
> + MAX_PKT_BURST, nb_pkt_per_burst);
> + return;
> + } else if (pkt_burst > 0) {
> + nb_pkt_per_burst = (uint32_t)pkt_burst;
> + return;
> + }
> +
> + /* If user gives a value of zero, query the PMD for its recommended Rx burst size. */
> + ret = rte_eth_dev_info_get(0, &dev_info);
> + if (ret != 0)
> + return;
> + burst_size = dev_info.default_rxportconf.burst_size;
> + if (burst_size == 0) {
> + RTE_LOG(INFO, L3FWD, "PMD does not recommend a burst size. Using default value %d. "
> + "User provided value must be in [1, %d]\n",
> + nb_pkt_per_burst, MAX_PKT_BURST);
> + return;
> + } else if (burst_size > MAX_PKT_BURST) {
> + RTE_LOG(INFO, L3FWD, "PMD recommended burst size %d exceeds maximum value %d. "
> + "Using default value %d\n",
> + burst_size, MAX_PKT_BURST, nb_pkt_per_burst);
> + return;
> + }
> + nb_pkt_per_burst = burst_size;
> + RTE_LOG(INFO, L3FWD, "Using PMD-provided burst value %d\n", burst_size);
> +}
> +
> #define MAX_JUMBO_PKT_LEN 9600
>
> static const char short_options[] =
> @@ -698,6 +747,7 @@ static const char short_options[] =
> #define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
> #define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
> #define CMD_LINE_OPT_ALG "alg"
> +#define CMD_LINE_OPT_PKT_BURST "burst"
>
> enum {
> /* long options mapped to a short option */
> @@ -726,7 +776,8 @@ enum {
> CMD_LINE_OPT_LOOKUP_NUM,
> CMD_LINE_OPT_ENABLE_VECTOR_NUM,
> CMD_LINE_OPT_VECTOR_SIZE_NUM,
> - CMD_LINE_OPT_VECTOR_TMO_NS_NUM
> + CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
> + CMD_LINE_OPT_PKT_BURST_NUM
> };
>
> static const struct option lgopts[] = {
> @@ -753,6 +804,7 @@ static const struct option lgopts[] = {
> {CMD_LINE_OPT_RULE_IPV4, 1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
> {CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
> {CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
> + {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
> {NULL, 0, 0, 0}
> };
>
> @@ -841,6 +893,10 @@ parse_args(int argc, char **argv)
> parse_queue_size(optarg, &nb_txd, 0);
> break;
>
> + case CMD_LINE_OPT_PKT_BURST_NUM:
> + parse_pkt_burst(optarg);
> + break;
> +
> case CMD_LINE_OPT_ETH_DEST_NUM:
> parse_eth_dest(optarg);
> break;
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 2/2] examples/l3fwd: add option to set mbuf cache size
2024-10-17 8:58 ` [PATCH v2 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
@ 2024-10-17 9:40 ` lihuisong (C)
0 siblings, 0 replies; 20+ messages in thread
From: lihuisong (C) @ 2024-10-17 9:40 UTC (permalink / raw)
To: Jie Hai, dev; +Cc: fengchengwen, thomas, ferruh.yigit
lgtm, Acked-by: Huisong Li <lihuisong@huawei.com>
在 2024/10/17 16:58, Jie Hai 写道:
> The mempool cache size of mbuf is set to
> RTE_MEMPOOL_CACHE_MAX_SIZE as default. This patch allows
> users to configure the cache size by "--mbcache", and limits
> the paramater to a maximum of RTE_MEMPOOL_CACHE_MAX_SIZE.
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> ---
> examples/l3fwd/l3fwd.h | 1 +
> examples/l3fwd/main.c | 33 ++++++++++++++++++++++++++++++---
> 2 files changed, 31 insertions(+), 3 deletions(-)
>
> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
> index 618e0eaa3af1..0cce3406ee7d 100644
> --- a/examples/l3fwd/l3fwd.h
> +++ b/examples/l3fwd/l3fwd.h
> @@ -117,6 +117,7 @@ extern struct acl_algorithms acl_alg[];
> extern uint32_t max_pkt_len;
>
> extern uint32_t nb_pkt_per_burst;
> +extern uint32_t mb_mempool_cache_size;
>
> /* Send burst of packets on an output interface */
> static inline int
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index 2feae5b311a2..1e2da739dded 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -58,6 +58,7 @@ static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST);
> uint16_t nb_rxd = RX_DESC_DEFAULT;
> uint16_t nb_txd = TX_DESC_DEFAULT;
> uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
> +uint32_t mb_mempool_cache_size = MEMPOOL_CACHE_SIZE;
>
> /**< Ports set in promiscuous mode off by default. */
> static int promiscuous_on;
> @@ -399,6 +400,7 @@ print_usage(const char *prgname)
> " [--rx-queue-size NPKTS]"
> " [--tx-queue-size NPKTS]"
> " [--burst NPKTS]"
> + " [--mbcache CACHESZ]"
> " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
> " [--max-pkt-len PKTLEN]"
> " [--no-numa]"
> @@ -426,6 +428,8 @@ print_usage(const char *prgname)
> " Default: %d\n"
> " --burst NPKTS: Burst size in decimal\n"
> " Default: %d\n"
> + " --mbcache CACHESZ: Cache size in decimal\n"
> + " Default: %d\n"
> " --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
> " --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
> " --no-numa: Disable numa awareness\n"
> @@ -455,7 +459,7 @@ print_usage(const char *prgname)
> " another is route entry at while line leads with character '%c'.\n"
> " --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
> " --alg: ACL classify method to use, one of: %s.\n\n",
> - prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
> + prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST, MEMPOOL_CACHE_SIZE,
> ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
> }
>
> @@ -673,6 +677,22 @@ parse_lookup(const char *optarg)
> return 0;
> }
>
> +static void
> +parse_mbcache_size(const char *optarg)
> +{
> + unsigned long mb_cache_size;
> + char *end = NULL;
> +
> + mb_cache_size = strtoul(optarg, &end, 10);
> + if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return;
> + if (mb_cache_size <= RTE_MEMPOOL_CACHE_MAX_SIZE)
> + mb_mempool_cache_size = (uint32_t)mb_cache_size;
> + else
> + rte_exit(EXIT_FAILURE, "mbcache must be >= 0 and <= %d\n",
> + RTE_MEMPOOL_CACHE_MAX_SIZE);
> +}
> +
> static void
> parse_pkt_burst(const char *optarg)
> {
> @@ -748,6 +768,7 @@ static const char short_options[] =
> #define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
> #define CMD_LINE_OPT_ALG "alg"
> #define CMD_LINE_OPT_PKT_BURST "burst"
> +#define CMD_LINE_OPT_MB_CACHE_SIZE "mbcache"
>
> enum {
> /* long options mapped to a short option */
> @@ -777,7 +798,8 @@ enum {
> CMD_LINE_OPT_ENABLE_VECTOR_NUM,
> CMD_LINE_OPT_VECTOR_SIZE_NUM,
> CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
> - CMD_LINE_OPT_PKT_BURST_NUM
> + CMD_LINE_OPT_PKT_BURST_NUM,
> + CMD_LINE_OPT_MB_CACHE_SIZE_NUM
> };
>
> static const struct option lgopts[] = {
> @@ -805,6 +827,7 @@ static const struct option lgopts[] = {
> {CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
> {CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
> {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
> + {CMD_LINE_OPT_MB_CACHE_SIZE, 1, 0, CMD_LINE_OPT_MB_CACHE_SIZE_NUM},
> {NULL, 0, 0, 0}
> };
>
> @@ -897,6 +920,10 @@ parse_args(int argc, char **argv)
> parse_pkt_burst(optarg);
> break;
>
> + case CMD_LINE_OPT_MB_CACHE_SIZE_NUM:
> + parse_mbcache_size(optarg);
> + break;
> +
> case CMD_LINE_OPT_ETH_DEST_NUM:
> parse_eth_dest(optarg);
> break;
> @@ -1089,7 +1116,7 @@ init_mem(uint16_t portid, unsigned int nb_mbuf)
> portid, socketid);
> pktmbuf_pool[portid][socketid] =
> rte_pktmbuf_pool_create(s, nb_mbuf,
> - MEMPOOL_CACHE_SIZE, 0,
> + mb_mempool_cache_size, 0,
> RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
> if (pktmbuf_pool[portid][socketid] == NULL)
> rte_exit(EXIT_FAILURE,
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 0/2] examples/l3fwd: add more options
2024-10-12 8:40 [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
` (2 preceding siblings ...)
2024-10-17 8:58 ` [PATCH v2 0/2] examples/l3fwd: add more options Jie Hai
@ 2024-10-17 9:58 ` Jie Hai
2024-10-17 9:58 ` [PATCH v3 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-17 9:58 ` [PATCH v3 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
2024-11-06 1:51 ` [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
5 siblings, 2 replies; 20+ messages in thread
From: Jie Hai @ 2024-10-17 9:58 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
Add options to support configuring RX burst size and cache size
of mbuf mempoool.
--
v3:
1. add Acked-bys.
2. fix compile error.
--
Jie Hai (2):
examples/l3fwd: add option to set RX burst size
examples/l3fwd: add option to set mbuf cache size
examples/l3fwd/l3fwd.h | 8 +++-
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm.c | 2 +-
examples/l3fwd/main.c | 89 ++++++++++++++++++++++++++++++++++++--
6 files changed, 96 insertions(+), 9 deletions(-)
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 1/2] examples/l3fwd: add option to set RX burst size
2024-10-17 9:58 ` [PATCH v3 " Jie Hai
@ 2024-10-17 9:58 ` Jie Hai
2024-10-17 9:58 ` [PATCH v3 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
1 sibling, 0 replies; 20+ messages in thread
From: Jie Hai @ 2024-10-17 9:58 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
parameter needs to be modified in some performance optimization
scenarios. So an option '--burst' is added to set the burst size
explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
value is MAX_PKT_BURST (512).
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
---
examples/l3fwd/l3fwd.h | 7 +++--
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm.c | 2 +-
examples/l3fwd/main.c | 60 ++++++++++++++++++++++++++++++++++++--
6 files changed, 67 insertions(+), 8 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 93ce652d02b7..618e0eaa3af1 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -23,10 +23,11 @@
#define RX_DESC_DEFAULT 1024
#define TX_DESC_DEFAULT 1024
-#define MAX_PKT_BURST 32
+#define DEFAULT_PKT_BURST 32
+#define MAX_PKT_BURST 512
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
-#define MEMPOOL_CACHE_SIZE 256
+#define MEMPOOL_CACHE_SIZE RTE_MEMPOOL_CACHE_MAX_SIZE
#define MAX_RX_QUEUE_PER_LCORE 16
#define VECTOR_SIZE_DEFAULT MAX_PKT_BURST
@@ -115,6 +116,8 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
+extern uint32_t nb_pkt_per_burst;
+
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index b635011ef708..ccb9946837ed 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1119,7 +1119,7 @@ acl_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid,
- pkts_burst, MAX_PKT_BURST);
+ pkts_burst, nb_pkt_per_burst);
if (nb_rx > 0) {
acl_process_pkts(pkts_burst, hops, nb_rx,
diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index 31a7e05e39d0..da9c45e3a482 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -644,7 +644,7 @@ em_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
index 993e36cec235..5fa32685f419 100644
--- a/examples/l3fwd/l3fwd_fib.c
+++ b/examples/l3fwd/l3fwd_fib.c
@@ -239,7 +239,7 @@ fib_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index e8fd95aae9ce..048c02491378 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -205,7 +205,7 @@ lpm_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 01b763e5ba11..8b7a07cc7d67 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -14,6 +14,7 @@
#include <getopt.h>
#include <signal.h>
#include <stdbool.h>
+#include <assert.h>
#include <rte_common.h>
#include <rte_vect.h>
@@ -53,8 +54,10 @@
#define MAX_LCORE_PARAMS 1024
+static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST, "MAX_PKT_BURST should be at most MEMPOOL_CACHE_SIZE");
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
+uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
@@ -395,6 +398,7 @@ print_usage(const char *prgname)
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--rx-queue-size NPKTS]"
" [--tx-queue-size NPKTS]"
+ " [--burst NPKTS]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
" [--max-pkt-len PKTLEN]"
" [--no-numa]"
@@ -420,6 +424,8 @@ print_usage(const char *prgname)
" Default: %d\n"
" --tx-queue-size NPKTS: Tx queue size in decimal\n"
" Default: %d\n"
+ " --burst NPKTS: Burst size in decimal\n"
+ " Default: %d\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
@@ -449,7 +455,7 @@ print_usage(const char *prgname)
" another is route entry at while line leads with character '%c'.\n"
" --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
" --alg: ACL classify method to use, one of: %s.\n\n",
- prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT,
+ prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
}
@@ -667,6 +673,49 @@ parse_lookup(const char *optarg)
return 0;
}
+static void
+parse_pkt_burst(const char *optarg)
+{
+ struct rte_eth_dev_info dev_info;
+ unsigned long pkt_burst;
+ uint16_t burst_size;
+ char *end = NULL;
+ int ret;
+
+ /* parse decimal string */
+ pkt_burst = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+
+ if (pkt_burst > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "User provided burst must be <= %d. Using default value %d\n",
+ MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ } else if (pkt_burst > 0) {
+ nb_pkt_per_burst = (uint32_t)pkt_burst;
+ return;
+ }
+
+ /* If user gives a value of zero, query the PMD for its recommended Rx burst size. */
+ ret = rte_eth_dev_info_get(0, &dev_info);
+ if (ret != 0)
+ return;
+ burst_size = dev_info.default_rxportconf.burst_size;
+ if (burst_size == 0) {
+ RTE_LOG(INFO, L3FWD, "PMD does not recommend a burst size. Using default value %d. "
+ "User provided value must be in [1, %d]\n",
+ nb_pkt_per_burst, MAX_PKT_BURST);
+ return;
+ } else if (burst_size > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "PMD recommended burst size %d exceeds maximum value %d. "
+ "Using default value %d\n",
+ burst_size, MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ }
+ nb_pkt_per_burst = burst_size;
+ RTE_LOG(INFO, L3FWD, "Using PMD-provided burst value %d\n", burst_size);
+}
+
#define MAX_JUMBO_PKT_LEN 9600
static const char short_options[] =
@@ -698,6 +747,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
+#define CMD_LINE_OPT_PKT_BURST "burst"
enum {
/* long options mapped to a short option */
@@ -726,7 +776,8 @@ enum {
CMD_LINE_OPT_LOOKUP_NUM,
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
- CMD_LINE_OPT_VECTOR_TMO_NS_NUM
+ CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
+ CMD_LINE_OPT_PKT_BURST_NUM
};
static const struct option lgopts[] = {
@@ -753,6 +804,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_RULE_IPV4, 1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
+ {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
{NULL, 0, 0, 0}
};
@@ -841,6 +893,10 @@ parse_args(int argc, char **argv)
parse_queue_size(optarg, &nb_txd, 0);
break;
+ case CMD_LINE_OPT_PKT_BURST_NUM:
+ parse_pkt_burst(optarg);
+ break;
+
case CMD_LINE_OPT_ETH_DEST_NUM:
parse_eth_dest(optarg);
break;
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 2/2] examples/l3fwd: add option to set mbuf cache size
2024-10-17 9:58 ` [PATCH v3 " Jie Hai
2024-10-17 9:58 ` [PATCH v3 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
@ 2024-10-17 9:58 ` Jie Hai
2024-10-17 11:10 ` fengchengwen
1 sibling, 1 reply; 20+ messages in thread
From: Jie Hai @ 2024-10-17 9:58 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
The mempool cache size of mbuf is set to
RTE_MEMPOOL_CACHE_MAX_SIZE as default. This patch allows
users to configure the cache size by "--mbcache", and limits
the parameter to a maximum of RTE_MEMPOOL_CACHE_MAX_SIZE.
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
---
examples/l3fwd/l3fwd.h | 1 +
examples/l3fwd/main.c | 33 ++++++++++++++++++++++++++++++---
2 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 618e0eaa3af1..0cce3406ee7d 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -117,6 +117,7 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
extern uint32_t nb_pkt_per_burst;
+extern uint32_t mb_mempool_cache_size;
/* Send burst of packets on an output interface */
static inline int
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 8b7a07cc7d67..d08525faa1a6 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -58,6 +58,7 @@ static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST, "MAX_PKT_BURST should be at m
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
+uint32_t mb_mempool_cache_size = MEMPOOL_CACHE_SIZE;
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
@@ -399,6 +400,7 @@ print_usage(const char *prgname)
" [--rx-queue-size NPKTS]"
" [--tx-queue-size NPKTS]"
" [--burst NPKTS]"
+ " [--mbcache CACHESZ]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
" [--max-pkt-len PKTLEN]"
" [--no-numa]"
@@ -426,6 +428,8 @@ print_usage(const char *prgname)
" Default: %d\n"
" --burst NPKTS: Burst size in decimal\n"
" Default: %d\n"
+ " --mbcache CACHESZ: Cache size in decimal\n"
+ " Default: %d\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
@@ -455,7 +459,7 @@ print_usage(const char *prgname)
" another is route entry at while line leads with character '%c'.\n"
" --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
" --alg: ACL classify method to use, one of: %s.\n\n",
- prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
+ prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST, MEMPOOL_CACHE_SIZE,
ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
}
@@ -673,6 +677,22 @@ parse_lookup(const char *optarg)
return 0;
}
+static void
+parse_mbcache_size(const char *optarg)
+{
+ unsigned long mb_cache_size;
+ char *end = NULL;
+
+ mb_cache_size = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+ if (mb_cache_size <= RTE_MEMPOOL_CACHE_MAX_SIZE)
+ mb_mempool_cache_size = (uint32_t)mb_cache_size;
+ else
+ rte_exit(EXIT_FAILURE, "mbcache must be >= 0 and <= %d\n",
+ RTE_MEMPOOL_CACHE_MAX_SIZE);
+}
+
static void
parse_pkt_burst(const char *optarg)
{
@@ -748,6 +768,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
#define CMD_LINE_OPT_PKT_BURST "burst"
+#define CMD_LINE_OPT_MB_CACHE_SIZE "mbcache"
enum {
/* long options mapped to a short option */
@@ -777,7 +798,8 @@ enum {
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
- CMD_LINE_OPT_PKT_BURST_NUM
+ CMD_LINE_OPT_PKT_BURST_NUM,
+ CMD_LINE_OPT_MB_CACHE_SIZE_NUM
};
static const struct option lgopts[] = {
@@ -805,6 +827,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
{CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
+ {CMD_LINE_OPT_MB_CACHE_SIZE, 1, 0, CMD_LINE_OPT_MB_CACHE_SIZE_NUM},
{NULL, 0, 0, 0}
};
@@ -897,6 +920,10 @@ parse_args(int argc, char **argv)
parse_pkt_burst(optarg);
break;
+ case CMD_LINE_OPT_MB_CACHE_SIZE_NUM:
+ parse_mbcache_size(optarg);
+ break;
+
case CMD_LINE_OPT_ETH_DEST_NUM:
parse_eth_dest(optarg);
break;
@@ -1089,7 +1116,7 @@ init_mem(uint16_t portid, unsigned int nb_mbuf)
portid, socketid);
pktmbuf_pool[portid][socketid] =
rte_pktmbuf_pool_create(s, nb_mbuf,
- MEMPOOL_CACHE_SIZE, 0,
+ mb_mempool_cache_size, 0,
RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (pktmbuf_pool[portid][socketid] == NULL)
rte_exit(EXIT_FAILURE,
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 2/2] examples/l3fwd: add option to set mbuf cache size
2024-10-17 9:58 ` [PATCH v3 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
@ 2024-10-17 11:10 ` fengchengwen
0 siblings, 0 replies; 20+ messages in thread
From: fengchengwen @ 2024-10-17 11:10 UTC (permalink / raw)
To: Jie Hai, dev, thomas, ferruh.yigit; +Cc: lihuisong
There's a little tip that can be modified, with that modified:
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
On 2024/10/17 17:58, Jie Hai wrote:
> The mempool cache size of mbuf is set to
> RTE_MEMPOOL_CACHE_MAX_SIZE as default. This patch allows
> users to configure the cache size by "--mbcache", and limits
> the parameter to a maximum of RTE_MEMPOOL_CACHE_MAX_SIZE.
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> Acked-by: Huisong Li <lihuisong@huawei.com>
> Acked-by: Morten Brørup <mb@smartsharesystems.com>
> ---
> examples/l3fwd/l3fwd.h | 1 +
> examples/l3fwd/main.c | 33 ++++++++++++++++++++++++++++++---
> 2 files changed, 31 insertions(+), 3 deletions(-)
>
> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
> index 618e0eaa3af1..0cce3406ee7d 100644
> --- a/examples/l3fwd/l3fwd.h
> +++ b/examples/l3fwd/l3fwd.h
> @@ -117,6 +117,7 @@ extern struct acl_algorithms acl_alg[];
> extern uint32_t max_pkt_len;
>
> extern uint32_t nb_pkt_per_burst;
> +extern uint32_t mb_mempool_cache_size;
>
> /* Send burst of packets on an output interface */
> static inline int
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index 8b7a07cc7d67..d08525faa1a6 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -58,6 +58,7 @@ static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST, "MAX_PKT_BURST should be at m
> uint16_t nb_rxd = RX_DESC_DEFAULT;
> uint16_t nb_txd = TX_DESC_DEFAULT;
> uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
> +uint32_t mb_mempool_cache_size = MEMPOOL_CACHE_SIZE;
>
> /**< Ports set in promiscuous mode off by default. */
> static int promiscuous_on;
> @@ -399,6 +400,7 @@ print_usage(const char *prgname)
> " [--rx-queue-size NPKTS]"
> " [--tx-queue-size NPKTS]"
> " [--burst NPKTS]"
> + " [--mbcache CACHESZ]"
> " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
> " [--max-pkt-len PKTLEN]"
> " [--no-numa]"
> @@ -426,6 +428,8 @@ print_usage(const char *prgname)
> " Default: %d\n"
> " --burst NPKTS: Burst size in decimal\n"
> " Default: %d\n"
> + " --mbcache CACHESZ: Cache size in decimal\n"
Suggest " --mbcache CACHESZ: Mbuf cache size in decimal\n"
> + " Default: %d\n"
> " --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
> " --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
> " --no-numa: Disable numa awareness\n"
> @@ -455,7 +459,7 @@ print_usage(const char *prgname)
> " another is route entry at while line leads with character '%c'.\n"
> " --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
> " --alg: ACL classify method to use, one of: %s.\n\n",
> - prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
> + prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST, MEMPOOL_CACHE_SIZE,
> ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
> }
>
> @@ -673,6 +677,22 @@ parse_lookup(const char *optarg)
> return 0;
> }
>
> +static void
> +parse_mbcache_size(const char *optarg)
> +{
> + unsigned long mb_cache_size;
> + char *end = NULL;
> +
> + mb_cache_size = strtoul(optarg, &end, 10);
> + if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return;
> + if (mb_cache_size <= RTE_MEMPOOL_CACHE_MAX_SIZE)
> + mb_mempool_cache_size = (uint32_t)mb_cache_size;
> + else
> + rte_exit(EXIT_FAILURE, "mbcache must be >= 0 and <= %d\n",
> + RTE_MEMPOOL_CACHE_MAX_SIZE);
> +}
> +
> static void
> parse_pkt_burst(const char *optarg)
> {
> @@ -748,6 +768,7 @@ static const char short_options[] =
> #define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
> #define CMD_LINE_OPT_ALG "alg"
> #define CMD_LINE_OPT_PKT_BURST "burst"
> +#define CMD_LINE_OPT_MB_CACHE_SIZE "mbcache"
>
> enum {
> /* long options mapped to a short option */
> @@ -777,7 +798,8 @@ enum {
> CMD_LINE_OPT_ENABLE_VECTOR_NUM,
> CMD_LINE_OPT_VECTOR_SIZE_NUM,
> CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
> - CMD_LINE_OPT_PKT_BURST_NUM
> + CMD_LINE_OPT_PKT_BURST_NUM,
> + CMD_LINE_OPT_MB_CACHE_SIZE_NUM
> };
>
> static const struct option lgopts[] = {
> @@ -805,6 +827,7 @@ static const struct option lgopts[] = {
> {CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
> {CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
> {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
> + {CMD_LINE_OPT_MB_CACHE_SIZE, 1, 0, CMD_LINE_OPT_MB_CACHE_SIZE_NUM},
> {NULL, 0, 0, 0}
> };
>
> @@ -897,6 +920,10 @@ parse_args(int argc, char **argv)
> parse_pkt_burst(optarg);
> break;
>
> + case CMD_LINE_OPT_MB_CACHE_SIZE_NUM:
> + parse_mbcache_size(optarg);
> + break;
> +
> case CMD_LINE_OPT_ETH_DEST_NUM:
> parse_eth_dest(optarg);
> break;
> @@ -1089,7 +1116,7 @@ init_mem(uint16_t portid, unsigned int nb_mbuf)
> portid, socketid);
> pktmbuf_pool[portid][socketid] =
> rte_pktmbuf_pool_create(s, nb_mbuf,
> - MEMPOOL_CACHE_SIZE, 0,
> + mb_mempool_cache_size, 0,
> RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
> if (pktmbuf_pool[portid][socketid] == NULL)
> rte_exit(EXIT_FAILURE,
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 0/2] examples/l3fwd: add more options
2024-10-12 8:40 [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
` (3 preceding siblings ...)
2024-10-17 9:58 ` [PATCH v3 " Jie Hai
@ 2024-10-18 1:08 ` Jie Hai
2024-10-18 1:08 ` [PATCH v4 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
` (4 more replies)
2024-11-06 1:51 ` [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
5 siblings, 5 replies; 20+ messages in thread
From: Jie Hai @ 2024-10-18 1:08 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
Add options to support configuring RX burst size and cache size
of mbuf mempoool.
--
v4:
1. fix help info.
v3:
1. add Acked-bys.
2. fix compile error.
--
Jie Hai (2):
examples/l3fwd: add option to set RX burst size
examples/l3fwd: add option to set mbuf cache size
examples/l3fwd/l3fwd.h | 8 +++-
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm.c | 2 +-
examples/l3fwd/main.c | 89 ++++++++++++++++++++++++++++++++++++--
6 files changed, 96 insertions(+), 9 deletions(-)
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 1/2] examples/l3fwd: add option to set RX burst size
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
@ 2024-10-18 1:08 ` Jie Hai
2024-10-18 1:08 ` [PATCH v4 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
` (3 subsequent siblings)
4 siblings, 0 replies; 20+ messages in thread
From: Jie Hai @ 2024-10-18 1:08 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
parameter needs to be modified in some performance optimization
scenarios. So an option '--burst' is added to set the burst size
explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
value is MAX_PKT_BURST (512).
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
---
examples/l3fwd/l3fwd.h | 7 +++--
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_em.c | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm.c | 2 +-
examples/l3fwd/main.c | 60 ++++++++++++++++++++++++++++++++++++--
6 files changed, 67 insertions(+), 8 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 93ce652d02b7..618e0eaa3af1 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -23,10 +23,11 @@
#define RX_DESC_DEFAULT 1024
#define TX_DESC_DEFAULT 1024
-#define MAX_PKT_BURST 32
+#define DEFAULT_PKT_BURST 32
+#define MAX_PKT_BURST 512
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
-#define MEMPOOL_CACHE_SIZE 256
+#define MEMPOOL_CACHE_SIZE RTE_MEMPOOL_CACHE_MAX_SIZE
#define MAX_RX_QUEUE_PER_LCORE 16
#define VECTOR_SIZE_DEFAULT MAX_PKT_BURST
@@ -115,6 +116,8 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
+extern uint32_t nb_pkt_per_burst;
+
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index b635011ef708..ccb9946837ed 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1119,7 +1119,7 @@ acl_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid,
- pkts_burst, MAX_PKT_BURST);
+ pkts_burst, nb_pkt_per_burst);
if (nb_rx > 0) {
acl_process_pkts(pkts_burst, hops, nb_rx,
diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index 31a7e05e39d0..da9c45e3a482 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -644,7 +644,7 @@ em_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
index 993e36cec235..5fa32685f419 100644
--- a/examples/l3fwd/l3fwd_fib.c
+++ b/examples/l3fwd/l3fwd_fib.c
@@ -239,7 +239,7 @@ fib_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index e8fd95aae9ce..048c02491378 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -205,7 +205,7 @@ lpm_main_loop(__rte_unused void *dummy)
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
- MAX_PKT_BURST);
+ nb_pkt_per_burst);
if (nb_rx == 0)
continue;
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 01b763e5ba11..8b7a07cc7d67 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -14,6 +14,7 @@
#include <getopt.h>
#include <signal.h>
#include <stdbool.h>
+#include <assert.h>
#include <rte_common.h>
#include <rte_vect.h>
@@ -53,8 +54,10 @@
#define MAX_LCORE_PARAMS 1024
+static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST, "MAX_PKT_BURST should be at most MEMPOOL_CACHE_SIZE");
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
+uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
@@ -395,6 +398,7 @@ print_usage(const char *prgname)
" --config (port,queue,lcore)[,(port,queue,lcore)]"
" [--rx-queue-size NPKTS]"
" [--tx-queue-size NPKTS]"
+ " [--burst NPKTS]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
" [--max-pkt-len PKTLEN]"
" [--no-numa]"
@@ -420,6 +424,8 @@ print_usage(const char *prgname)
" Default: %d\n"
" --tx-queue-size NPKTS: Tx queue size in decimal\n"
" Default: %d\n"
+ " --burst NPKTS: Burst size in decimal\n"
+ " Default: %d\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
@@ -449,7 +455,7 @@ print_usage(const char *prgname)
" another is route entry at while line leads with character '%c'.\n"
" --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
" --alg: ACL classify method to use, one of: %s.\n\n",
- prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT,
+ prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
}
@@ -667,6 +673,49 @@ parse_lookup(const char *optarg)
return 0;
}
+static void
+parse_pkt_burst(const char *optarg)
+{
+ struct rte_eth_dev_info dev_info;
+ unsigned long pkt_burst;
+ uint16_t burst_size;
+ char *end = NULL;
+ int ret;
+
+ /* parse decimal string */
+ pkt_burst = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+
+ if (pkt_burst > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "User provided burst must be <= %d. Using default value %d\n",
+ MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ } else if (pkt_burst > 0) {
+ nb_pkt_per_burst = (uint32_t)pkt_burst;
+ return;
+ }
+
+ /* If user gives a value of zero, query the PMD for its recommended Rx burst size. */
+ ret = rte_eth_dev_info_get(0, &dev_info);
+ if (ret != 0)
+ return;
+ burst_size = dev_info.default_rxportconf.burst_size;
+ if (burst_size == 0) {
+ RTE_LOG(INFO, L3FWD, "PMD does not recommend a burst size. Using default value %d. "
+ "User provided value must be in [1, %d]\n",
+ nb_pkt_per_burst, MAX_PKT_BURST);
+ return;
+ } else if (burst_size > MAX_PKT_BURST) {
+ RTE_LOG(INFO, L3FWD, "PMD recommended burst size %d exceeds maximum value %d. "
+ "Using default value %d\n",
+ burst_size, MAX_PKT_BURST, nb_pkt_per_burst);
+ return;
+ }
+ nb_pkt_per_burst = burst_size;
+ RTE_LOG(INFO, L3FWD, "Using PMD-provided burst value %d\n", burst_size);
+}
+
#define MAX_JUMBO_PKT_LEN 9600
static const char short_options[] =
@@ -698,6 +747,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
+#define CMD_LINE_OPT_PKT_BURST "burst"
enum {
/* long options mapped to a short option */
@@ -726,7 +776,8 @@ enum {
CMD_LINE_OPT_LOOKUP_NUM,
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
- CMD_LINE_OPT_VECTOR_TMO_NS_NUM
+ CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
+ CMD_LINE_OPT_PKT_BURST_NUM
};
static const struct option lgopts[] = {
@@ -753,6 +804,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_RULE_IPV4, 1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
+ {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
{NULL, 0, 0, 0}
};
@@ -841,6 +893,10 @@ parse_args(int argc, char **argv)
parse_queue_size(optarg, &nb_txd, 0);
break;
+ case CMD_LINE_OPT_PKT_BURST_NUM:
+ parse_pkt_burst(optarg);
+ break;
+
case CMD_LINE_OPT_ETH_DEST_NUM:
parse_eth_dest(optarg);
break;
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 2/2] examples/l3fwd: add option to set mbuf cache size
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
2024-10-18 1:08 ` [PATCH v4 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
@ 2024-10-18 1:08 ` Jie Hai
2024-11-06 1:52 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
` (2 subsequent siblings)
4 siblings, 0 replies; 20+ messages in thread
From: Jie Hai @ 2024-10-18 1:08 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen, haijie1
The mempool cache size of mbuf is set to
RTE_MEMPOOL_CACHE_MAX_SIZE as default. This patch allows
users to configure the cache size by "--mbcache", and limits
the parameter to a maximum of RTE_MEMPOOL_CACHE_MAX_SIZE.
Signed-off-by: Jie Hai <haijie1@huawei.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
---
examples/l3fwd/l3fwd.h | 1 +
examples/l3fwd/main.c | 33 ++++++++++++++++++++++++++++++---
2 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 618e0eaa3af1..0cce3406ee7d 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -117,6 +117,7 @@ extern struct acl_algorithms acl_alg[];
extern uint32_t max_pkt_len;
extern uint32_t nb_pkt_per_burst;
+extern uint32_t mb_mempool_cache_size;
/* Send burst of packets on an output interface */
static inline int
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 8b7a07cc7d67..7d58ae3c11bc 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -58,6 +58,7 @@ static_assert(MEMPOOL_CACHE_SIZE >= MAX_PKT_BURST, "MAX_PKT_BURST should be at m
uint16_t nb_rxd = RX_DESC_DEFAULT;
uint16_t nb_txd = TX_DESC_DEFAULT;
uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
+uint32_t mb_mempool_cache_size = MEMPOOL_CACHE_SIZE;
/**< Ports set in promiscuous mode off by default. */
static int promiscuous_on;
@@ -399,6 +400,7 @@ print_usage(const char *prgname)
" [--rx-queue-size NPKTS]"
" [--tx-queue-size NPKTS]"
" [--burst NPKTS]"
+ " [--mbcache CACHESZ]"
" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
" [--max-pkt-len PKTLEN]"
" [--no-numa]"
@@ -426,6 +428,8 @@ print_usage(const char *prgname)
" Default: %d\n"
" --burst NPKTS: Burst size in decimal\n"
" Default: %d\n"
+ " --mbcache CACHESZ: Mbuf cache size in decimal\n"
+ " Default: %d\n"
" --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
" --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
" --no-numa: Disable numa awareness\n"
@@ -455,7 +459,7 @@ print_usage(const char *prgname)
" another is route entry at while line leads with character '%c'.\n"
" --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
" --alg: ACL classify method to use, one of: %s.\n\n",
- prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
+ prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST, MEMPOOL_CACHE_SIZE,
ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
}
@@ -673,6 +677,22 @@ parse_lookup(const char *optarg)
return 0;
}
+static void
+parse_mbcache_size(const char *optarg)
+{
+ unsigned long mb_cache_size;
+ char *end = NULL;
+
+ mb_cache_size = strtoul(optarg, &end, 10);
+ if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+ if (mb_cache_size <= RTE_MEMPOOL_CACHE_MAX_SIZE)
+ mb_mempool_cache_size = (uint32_t)mb_cache_size;
+ else
+ rte_exit(EXIT_FAILURE, "mbcache must be >= 0 and <= %d\n",
+ RTE_MEMPOOL_CACHE_MAX_SIZE);
+}
+
static void
parse_pkt_burst(const char *optarg)
{
@@ -748,6 +768,7 @@ static const char short_options[] =
#define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
#define CMD_LINE_OPT_ALG "alg"
#define CMD_LINE_OPT_PKT_BURST "burst"
+#define CMD_LINE_OPT_MB_CACHE_SIZE "mbcache"
enum {
/* long options mapped to a short option */
@@ -777,7 +798,8 @@ enum {
CMD_LINE_OPT_ENABLE_VECTOR_NUM,
CMD_LINE_OPT_VECTOR_SIZE_NUM,
CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
- CMD_LINE_OPT_PKT_BURST_NUM
+ CMD_LINE_OPT_PKT_BURST_NUM,
+ CMD_LINE_OPT_MB_CACHE_SIZE_NUM
};
static const struct option lgopts[] = {
@@ -805,6 +827,7 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
{CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
{CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPT_PKT_BURST_NUM},
+ {CMD_LINE_OPT_MB_CACHE_SIZE, 1, 0, CMD_LINE_OPT_MB_CACHE_SIZE_NUM},
{NULL, 0, 0, 0}
};
@@ -897,6 +920,10 @@ parse_args(int argc, char **argv)
parse_pkt_burst(optarg);
break;
+ case CMD_LINE_OPT_MB_CACHE_SIZE_NUM:
+ parse_mbcache_size(optarg);
+ break;
+
case CMD_LINE_OPT_ETH_DEST_NUM:
parse_eth_dest(optarg);
break;
@@ -1089,7 +1116,7 @@ init_mem(uint16_t portid, unsigned int nb_mbuf)
portid, socketid);
pktmbuf_pool[portid][socketid] =
rte_pktmbuf_pool_create(s, nb_mbuf,
- MEMPOOL_CACHE_SIZE, 0,
+ mb_mempool_cache_size, 0,
RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (pktmbuf_pool[portid][socketid] == NULL)
rte_exit(EXIT_FAILURE,
--
2.22.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] examples/l3fwd: add option to set RX burst size
2024-10-12 8:40 [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
` (4 preceding siblings ...)
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
@ 2024-11-06 1:51 ` Jie Hai
5 siblings, 0 replies; 20+ messages in thread
From: Jie Hai @ 2024-11-06 1:51 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen
Hi, all maintainers,
Kindly ping for review.
Thanks,
Jie Hai
On 2024/10/12 16:40, Jie Hai wrote:
> Now the Rx burst size is fixed to MAX_PKT_BURST (32). This
> parameter needs to be modified in some performance optimization
> scenarios. So an option '--burst' is added to set the burst size
> explicitly. The default value is DEFAULT_PKT_BURST (32) and maximum
> value is MAX_PKT_BURST (512).
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> ---
> examples/l3fwd/l3fwd.h | 5 +++-
> examples/l3fwd/l3fwd_acl.c | 2 +-
> examples/l3fwd/l3fwd_em.c | 2 +-
> examples/l3fwd/l3fwd_fib.c | 2 +-
> examples/l3fwd/l3fwd_lpm.c | 2 +-
> examples/l3fwd/main.c | 58 ++++++++++++++++++++++++++++++++++++--
> 6 files changed, 64 insertions(+), 7 deletions(-)
>
> diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
> index 93ce652d02b7..3ebee6301295 100644
> --- a/examples/l3fwd/l3fwd.h
> +++ b/examples/l3fwd/l3fwd.h
> @@ -23,7 +23,8 @@
> #define RX_DESC_DEFAULT 1024
> #define TX_DESC_DEFAULT 1024
>
> -#define MAX_PKT_BURST 32
> +#define DEFAULT_PKT_BURST 32
> +#define MAX_PKT_BURST 512
> #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
>
> #define MEMPOOL_CACHE_SIZE 256
> @@ -115,6 +116,8 @@ extern struct acl_algorithms acl_alg[];
>
> extern uint32_t max_pkt_len;
>
> +extern uint32_t nb_pkt_per_burst;
> +
> /* Send burst of packets on an output interface */
> static inline int
> send_burst(struct lcore_conf *qconf, uint16_t n, uint16_t port)
> diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
> index b635011ef708..ccb9946837ed 100644
> --- a/examples/l3fwd/l3fwd_acl.c
> +++ b/examples/l3fwd/l3fwd_acl.c
> @@ -1119,7 +1119,7 @@ acl_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid,
> - pkts_burst, MAX_PKT_BURST);
> + pkts_burst, nb_pkt_per_burst);
>
> if (nb_rx > 0) {
> acl_process_pkts(pkts_burst, hops, nb_rx,
> diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
> index 31a7e05e39d0..da9c45e3a482 100644
> --- a/examples/l3fwd/l3fwd_em.c
> +++ b/examples/l3fwd/l3fwd_em.c
> @@ -644,7 +644,7 @@ em_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> - MAX_PKT_BURST);
> + nb_pkt_per_burst);
> if (nb_rx == 0)
> continue;
>
> diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
> index f38b19af3f57..aa81b12fe7dc 100644
> --- a/examples/l3fwd/l3fwd_fib.c
> +++ b/examples/l3fwd/l3fwd_fib.c
> @@ -239,7 +239,7 @@ fib_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> - MAX_PKT_BURST);
> + nb_pkt_per_burst);
> if (nb_rx == 0)
> continue;
>
> diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
> index e8fd95aae9ce..048c02491378 100644
> --- a/examples/l3fwd/l3fwd_lpm.c
> +++ b/examples/l3fwd/l3fwd_lpm.c
> @@ -205,7 +205,7 @@ lpm_main_loop(__rte_unused void *dummy)
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
> - MAX_PKT_BURST);
> + nb_pkt_per_burst);
> if (nb_rx == 0)
> continue;
>
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index 01b763e5ba11..ba0a7f7088f0 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -55,6 +55,7 @@
>
> uint16_t nb_rxd = RX_DESC_DEFAULT;
> uint16_t nb_txd = TX_DESC_DEFAULT;
> +uint32_t nb_pkt_per_burst = DEFAULT_PKT_BURST;
>
> /**< Ports set in promiscuous mode off by default. */
> static int promiscuous_on;
> @@ -395,6 +396,7 @@ print_usage(const char *prgname)
> " --config (port,queue,lcore)[,(port,queue,lcore)]"
> " [--rx-queue-size NPKTS]"
> " [--tx-queue-size NPKTS]"
> + " [--burst NPKTS]"
> " [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
> " [--max-pkt-len PKTLEN]"
> " [--no-numa]"
> @@ -420,6 +422,8 @@ print_usage(const char *prgname)
> " Default: %d\n"
> " --tx-queue-size NPKTS: Tx queue size in decimal\n"
> " Default: %d\n"
> + " --burst NPKTS: Burst size in decimal\n"
> + " Default: %d\n"
> " --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
> " --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
> " --no-numa: Disable numa awareness\n"
> @@ -449,7 +453,7 @@ print_usage(const char *prgname)
> " another is route entry at while line leads with character '%c'.\n"
> " --rule_ipv6=FILE: Specify the ipv6 rules entries file.\n"
> " --alg: ACL classify method to use, one of: %s.\n\n",
> - prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT,
> + prgname, RX_DESC_DEFAULT, TX_DESC_DEFAULT, DEFAULT_PKT_BURST,
> ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
> }
>
> @@ -667,6 +671,49 @@ parse_lookup(const char *optarg)
> return 0;
> }
>
> +static void
> +parse_pkt_burst(const char *optarg)
> +{
> + struct rte_eth_dev_info dev_info;
> + uint16_t burst_size;
> + uint16_t pkt_burst;
> + char *end = NULL;
> + int ret;
> +
> + /* parse decimal string */
> + pkt_burst = strtoul(optarg, &end, 10);
> + if ((optarg[0] == '\0') || (end == NULL) || (*end != '\0'))
> + return;
> +
> + if (pkt_burst > MAX_PKT_BURST) {
> + RTE_LOG(INFO, L3FWD, "User provided burst must be <= %d. Using default value %d\n",
> + MAX_PKT_BURST, nb_pkt_per_burst);
> + return;
> + } else if (pkt_burst > 0) {
> + nb_pkt_per_burst = pkt_burst;
> + return;
> + }
> +
> + /* If user gives a value of zero, query the PMD for its recommended Rx burst size. */
> + ret = rte_eth_dev_info_get(0, &dev_info);
> + if (ret != 0)
> + return;
> + burst_size = dev_info.default_rxportconf.burst_size;
> + if (burst_size == 0) {
> + RTE_LOG(INFO, L3FWD, "PMD does not recommend a burst size. Using default value %d. "
> + "User provided value must be in [1, %d]\n",
> + nb_pkt_per_burst, MAX_PKT_BURST);
> + return;
> + } else if (burst_size > MAX_PKT_BURST) {
> + RTE_LOG(INFO, L3FWD, "PMD recommended burst size %d exceeds maximum value %d. "
> + "Using default value %d\n",
> + burst_size, MAX_PKT_BURST, nb_pkt_per_burst);
> + return;
> + }
> + nb_pkt_per_burst = burst_size;
> + RTE_LOG(INFO, L3FWD, "Using PMD-provided burst value %d\n", burst_size);
> +}
> +
> #define MAX_JUMBO_PKT_LEN 9600
>
> static const char short_options[] =
> @@ -698,6 +745,7 @@ static const char short_options[] =
> #define CMD_LINE_OPT_RULE_IPV4 "rule_ipv4"
> #define CMD_LINE_OPT_RULE_IPV6 "rule_ipv6"
> #define CMD_LINE_OPT_ALG "alg"
> +#define CMD_LINE_OPT_PKT_BURST "burst"
>
> enum {
> /* long options mapped to a short option */
> @@ -726,7 +774,8 @@ enum {
> CMD_LINE_OPT_LOOKUP_NUM,
> CMD_LINE_OPT_ENABLE_VECTOR_NUM,
> CMD_LINE_OPT_VECTOR_SIZE_NUM,
> - CMD_LINE_OPT_VECTOR_TMO_NS_NUM
> + CMD_LINE_OPT_VECTOR_TMO_NS_NUM,
> + CMD_LINE_OPTPKT_BURST_NUM
> };
>
> static const struct option lgopts[] = {
> @@ -753,6 +802,7 @@ static const struct option lgopts[] = {
> {CMD_LINE_OPT_RULE_IPV4, 1, 0, CMD_LINE_OPT_RULE_IPV4_NUM},
> {CMD_LINE_OPT_RULE_IPV6, 1, 0, CMD_LINE_OPT_RULE_IPV6_NUM},
> {CMD_LINE_OPT_ALG, 1, 0, CMD_LINE_OPT_ALG_NUM},
> + {CMD_LINE_OPT_PKT_BURST, 1, 0, CMD_LINE_OPTPKT_BURST_NUM},
> {NULL, 0, 0, 0}
> };
>
> @@ -841,6 +891,10 @@ parse_args(int argc, char **argv)
> parse_queue_size(optarg, &nb_txd, 0);
> break;
>
> + case CMD_LINE_OPTPKT_BURST_NUM:
> + parse_pkt_burst(optarg);
> + break;
> +
> case CMD_LINE_OPT_ETH_DEST_NUM:
> parse_eth_dest(optarg);
> break;
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 0/2] examples/l3fwd: add more options
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
2024-10-18 1:08 ` [PATCH v4 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-18 1:08 ` [PATCH v4 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
@ 2024-11-06 1:52 ` Jie Hai
2024-11-13 1:35 ` Jie Hai
2024-11-19 18:07 ` Thomas Monjalon
4 siblings, 0 replies; 20+ messages in thread
From: Jie Hai @ 2024-11-06 1:52 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit; +Cc: lihuisong, fengchengwen
Hi, all maintainers,
Kindly ping for review.
Thanks,
Jie Hai
On 2024/10/18 9:08, Jie Hai wrote:
> Add options to support configuring RX burst size and cache size
> of mbuf mempoool.
>
> --
> v4:
> 1. fix help info.
>
> v3:
> 1. add Acked-bys.
> 2. fix compile error.
> --
>
> Jie Hai (2):
> examples/l3fwd: add option to set RX burst size
> examples/l3fwd: add option to set mbuf cache size
>
> examples/l3fwd/l3fwd.h | 8 +++-
> examples/l3fwd/l3fwd_acl.c | 2 +-
> examples/l3fwd/l3fwd_em.c | 2 +-
> examples/l3fwd/l3fwd_fib.c | 2 +-
> examples/l3fwd/l3fwd_lpm.c | 2 +-
> examples/l3fwd/main.c | 89 ++++++++++++++++++++++++++++++++++++--
> 6 files changed, 96 insertions(+), 9 deletions(-)
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 0/2] examples/l3fwd: add more options
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
` (2 preceding siblings ...)
2024-11-06 1:52 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
@ 2024-11-13 1:35 ` Jie Hai
2024-11-19 18:07 ` Thomas Monjalon
4 siblings, 0 replies; 20+ messages in thread
From: Jie Hai @ 2024-11-13 1:35 UTC (permalink / raw)
To: dev, thomas, ferruh.yigit
Cc: lihuisong, fengchengwen, ferruh.yigit, Ferruh Yigit, Thomas Monjalon
Hi, Ferruh and Thomas,
Kindly ping for reviews.
Since this patchset has some Acked-bys and no comments,
are there any comments or suggestions?
Best regards,
Jie Hai
On 2024/10/18 9:08, Jie Hai wrote:
> Add options to support configuring RX burst size and cache size
> of mbuf mempoool.
>
> --
> v4:
> 1. fix help info.
>
> v3:
> 1. add Acked-bys.
> 2. fix compile error.
> --
>
> Jie Hai (2):
> examples/l3fwd: add option to set RX burst size
> examples/l3fwd: add option to set mbuf cache size
>
> examples/l3fwd/l3fwd.h | 8 +++-
> examples/l3fwd/l3fwd_acl.c | 2 +-
> examples/l3fwd/l3fwd_em.c | 2 +-
> examples/l3fwd/l3fwd_fib.c | 2 +-
> examples/l3fwd/l3fwd_lpm.c | 2 +-
> examples/l3fwd/main.c | 89 ++++++++++++++++++++++++++++++++++++--
> 6 files changed, 96 insertions(+), 9 deletions(-)
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 0/2] examples/l3fwd: add more options
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
` (3 preceding siblings ...)
2024-11-13 1:35 ` Jie Hai
@ 2024-11-19 18:07 ` Thomas Monjalon
4 siblings, 0 replies; 20+ messages in thread
From: Thomas Monjalon @ 2024-11-19 18:07 UTC (permalink / raw)
To: Jie Hai; +Cc: dev, ferruh.yigit, lihuisong, fengchengwen, haijie1
18/10/2024 03:08, Jie Hai:
> Add options to support configuring RX burst size and cache size
> of mbuf mempoool.
Applied, thanks.
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2024-11-19 18:07 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-10-12 8:40 [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-12 9:06 ` fengchengwen
2024-10-12 12:22 ` Morten Brørup
2024-10-17 8:58 ` [PATCH v2 0/2] examples/l3fwd: add more options Jie Hai
2024-10-17 8:58 ` [PATCH v2 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-17 9:37 ` lihuisong (C)
2024-10-17 8:58 ` [PATCH v2 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
2024-10-17 9:40 ` lihuisong (C)
2024-10-17 9:18 ` [PATCH v2 0/2] examples/l3fwd: add more options Morten Brørup
2024-10-17 9:58 ` [PATCH v3 " Jie Hai
2024-10-17 9:58 ` [PATCH v3 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-17 9:58 ` [PATCH v3 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
2024-10-17 11:10 ` fengchengwen
2024-10-18 1:08 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
2024-10-18 1:08 ` [PATCH v4 1/2] examples/l3fwd: add option to set RX burst size Jie Hai
2024-10-18 1:08 ` [PATCH v4 2/2] examples/l3fwd: add option to set mbuf cache size Jie Hai
2024-11-06 1:52 ` [PATCH v4 0/2] examples/l3fwd: add more options Jie Hai
2024-11-13 1:35 ` Jie Hai
2024-11-19 18:07 ` Thomas Monjalon
2024-11-06 1:51 ` [PATCH] examples/l3fwd: add option to set RX burst size Jie Hai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).