* [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test.
@ 2017-07-10 7:20 Herbert Guan
2017-07-10 7:55 ` Jianbo Liu
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Herbert Guan @ 2017-07-10 7:20 UTC (permalink / raw)
To: dev, declan.doherty, jianbo.liu; +Cc: Herbert Guan
There were double-free problems in some test cases of link_bonding,
which will cause a duplicated mbuf will be added into mempool. After
double-free, some new allocated mbuf will hold a same address and
thus cause the memory corruption.
Another minor issue is that in some test cases, allocated mbuf will
not be released after test case exits. Hopefully these leaked mbuf
will be released by the next test case in its setup phase when
stopping the virtual pmd ports, while this do is a memory leak of
the exited test case.
To fix above 2 issues, this patch will do:
1) Release virtual pmd ports' tx queue in the clean up function
remove_slaves_and_stop_bonded_device() of each test cases.
2) Do not release allocated mbufs for test bursts. These mbufs
will be released in remove_slaves_and_stop_bonded_device() when
test case exits.
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
---
test/test/test_link_bonding.c | 54 +++----------------------------------------
1 file changed, 3 insertions(+), 51 deletions(-)
diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
index aa2a1a2..c4f5c70 100644
--- a/test/test/test_link_bonding.c
+++ b/test/test/test_link_bonding.c
@@ -221,6 +221,8 @@ struct rte_fdir_conf fdir_conf = {
};
+static void free_virtualpmd_tx_queue(void);
+
static int
configure_ethdev(uint8_t port_id, uint8_t start, uint8_t en_isr)
{
@@ -684,6 +686,7 @@ struct rte_fdir_conf fdir_conf = {
remove_slaves_and_stop_bonded_device(void)
{
/* Clean up and remove slaves from bonded device */
+ free_virtualpmd_tx_queue();
while (test_params->bonded_slave_count > 0)
TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
"test_remove_slave_from_bonded_device failed");
@@ -1621,9 +1624,6 @@ struct rte_fdir_conf fdir_conf = {
/* free mbufs */
for (i = 0; i < MAX_PKT_BURST; i++) {
- if (gen_pkt_burst[i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[i]);
-
if (rx_pkt_burst[i] != NULL)
rte_pktmbuf_free(rx_pkt_burst[i]);
}
@@ -1970,12 +1970,6 @@ struct rte_fdir_conf fdir_conf = {
for (i = 0; i < MAX_PKT_BURST; i++) {
if (rx_pkt_burst[i] != NULL)
rte_pktmbuf_free(rx_pkt_burst[i]);
-
- if (gen_pkt_burst[1][i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[1][i]);
-
- if (gen_pkt_burst[3][i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[1][i]);
}
/* Clean up and remove slaves from bonded device */
@@ -2547,16 +2541,6 @@ struct rte_fdir_conf fdir_conf = {
"(%d) port_stats.opackets not as expected",
test_params->slave_port_ids[3]);
- /* free mbufs */
- for (i = 0; i < TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
@@ -3456,16 +3440,6 @@ struct rte_fdir_conf fdir_conf = {
test_params->bonded_port_id, (int)port_stats.ipackets,
burst_size * 3);
- /* free mbufs allocate for rx testing */
- for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
@@ -3984,16 +3958,6 @@ struct rte_fdir_conf fdir_conf = {
"(%d) port_stats.ipackets not as expected\n",
test_params->bonded_port_id);
- /* free mbufs allocate for rx testing */
- for (i = 0; i < BROADCAST_LINK_STATUS_NUM_OF_SLAVES; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
@@ -4527,18 +4491,6 @@ struct rte_fdir_conf fdir_conf = {
"(%d) port_stats.ipackets not as expected\n",
test_params->bonded_port_id);
- /* free mbufs */
-
- for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-10 7:20 [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test Herbert Guan
@ 2017-07-10 7:55 ` Jianbo Liu
2017-07-10 11:13 ` [dpdk-dev] [PATCH v2] " Herbert Guan
2017-07-12 9:59 ` [dpdk-dev] [PATCH] " Declan Doherty
2 siblings, 0 replies; 9+ messages in thread
From: Jianbo Liu @ 2017-07-10 7:55 UTC (permalink / raw)
To: Herbert Guan; +Cc: dev, Declan Doherty
On 10 July 2017 at 15:20, Herbert Guan <herbert.guan@arm.com> wrote:
> There were double-free problems in some test cases of link_bonding,
> which will cause a duplicated mbuf will be added into mempool. After
> double-free, some new allocated mbuf will hold a same address and
> thus cause the memory corruption.
>
> Another minor issue is that in some test cases, allocated mbuf will
> not be released after test case exits. Hopefully these leaked mbuf
> will be released by the next test case in its setup phase when
> stopping the virtual pmd ports, while this do is a memory leak of
> the exited test case.
>
> To fix above 2 issues, this patch will do:
> 1) Release virtual pmd ports' tx queue in the clean up function
> remove_slaves_and_stop_bonded_device() of each test cases.
> 2) Do not release allocated mbufs for test bursts. These mbufs
> will be released in remove_slaves_and_stop_bonded_device() when
> test case exits.
>
> Signed-off-by: Herbert Guan <herbert.guan@arm.com>
> ---
> test/test/test_link_bonding.c | 54 +++----------------------------------------
> 1 file changed, 3 insertions(+), 51 deletions(-)
>
> diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
> index aa2a1a2..c4f5c70 100644
> --- a/test/test/test_link_bonding.c
> +++ b/test/test/test_link_bonding.c
> @@ -221,6 +221,8 @@ struct rte_fdir_conf fdir_conf = {
>
> };
>
> +static void free_virtualpmd_tx_queue(void);
> +
> static int
> configure_ethdev(uint8_t port_id, uint8_t start, uint8_t en_isr)
> {
> @@ -684,6 +686,7 @@ struct rte_fdir_conf fdir_conf = {
> remove_slaves_and_stop_bonded_device(void)
> {
> /* Clean up and remove slaves from bonded device */
> + free_virtualpmd_tx_queue();
> while (test_params->bonded_slave_count > 0)
> TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
> "test_remove_slave_from_bonded_device failed");
> @@ -1621,9 +1624,6 @@ struct rte_fdir_conf fdir_conf = {
>
> /* free mbufs */
> for (i = 0; i < MAX_PKT_BURST; i++) {
> - if (gen_pkt_burst[i] != NULL)
> - rte_pktmbuf_free(gen_pkt_burst[i]);
> -
> if (rx_pkt_burst[i] != NULL)
> rte_pktmbuf_free(rx_pkt_burst[i]);
> }
> @@ -1970,12 +1970,6 @@ struct rte_fdir_conf fdir_conf = {
> for (i = 0; i < MAX_PKT_BURST; i++) {
> if (rx_pkt_burst[i] != NULL)
> rte_pktmbuf_free(rx_pkt_burst[i]);
> -
> - if (gen_pkt_burst[1][i] != NULL)
> - rte_pktmbuf_free(gen_pkt_burst[1][i]);
> -
> - if (gen_pkt_burst[3][i] != NULL)
> - rte_pktmbuf_free(gen_pkt_burst[1][i]);
> }
>
> /* Clean up and remove slaves from bonded device */
> @@ -2547,16 +2541,6 @@ struct rte_fdir_conf fdir_conf = {
> "(%d) port_stats.opackets not as expected",
> test_params->slave_port_ids[3]);
>
> - /* free mbufs */
> - for (i = 0; i < TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT; i++) {
> - for (j = 0; j < MAX_PKT_BURST; j++) {
> - if (pkt_burst[i][j] != NULL) {
> - rte_pktmbuf_free(pkt_burst[i][j]);
> - pkt_burst[i][j] = NULL;
> - }
> - }
> - }
> -
> /* Clean up and remove slaves from bonded device */
> return remove_slaves_and_stop_bonded_device();
> }
> @@ -3456,16 +3440,6 @@ struct rte_fdir_conf fdir_conf = {
> test_params->bonded_port_id, (int)port_stats.ipackets,
> burst_size * 3);
>
> - /* free mbufs allocate for rx testing */
> - for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
> - for (j = 0; j < MAX_PKT_BURST; j++) {
> - if (pkt_burst[i][j] != NULL) {
> - rte_pktmbuf_free(pkt_burst[i][j]);
> - pkt_burst[i][j] = NULL;
> - }
> - }
> - }
> -
> /* Clean up and remove slaves from bonded device */
> return remove_slaves_and_stop_bonded_device();
> }
> @@ -3984,16 +3958,6 @@ struct rte_fdir_conf fdir_conf = {
> "(%d) port_stats.ipackets not as expected\n",
> test_params->bonded_port_id);
>
> - /* free mbufs allocate for rx testing */
> - for (i = 0; i < BROADCAST_LINK_STATUS_NUM_OF_SLAVES; i++) {
> - for (j = 0; j < MAX_PKT_BURST; j++) {
> - if (pkt_burst[i][j] != NULL) {
> - rte_pktmbuf_free(pkt_burst[i][j]);
> - pkt_burst[i][j] = NULL;
> - }
> - }
> - }
> -
> /* Clean up and remove slaves from bonded device */
> return remove_slaves_and_stop_bonded_device();
> }
> @@ -4527,18 +4491,6 @@ struct rte_fdir_conf fdir_conf = {
> "(%d) port_stats.ipackets not as expected\n",
> test_params->bonded_port_id);
>
> - /* free mbufs */
> -
> - for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
> - for (j = 0; j < MAX_PKT_BURST; j++) {
> - if (pkt_burst[i][j] != NULL) {
> - rte_pktmbuf_free(pkt_burst[i][j]);
> - pkt_burst[i][j] = NULL;
> - }
> - }
> - }
> -
> -
> /* Clean up and remove slaves from bonded device */
> return remove_slaves_and_stop_bonded_device();
> }
> --
> 1.8.3.1
>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [dpdk-dev] [PATCH v2] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-10 7:20 [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test Herbert Guan
2017-07-10 7:55 ` Jianbo Liu
@ 2017-07-10 11:13 ` Herbert Guan
2017-07-12 10:23 ` Declan Doherty
2017-07-18 16:13 ` Ferruh Yigit
2017-07-12 9:59 ` [dpdk-dev] [PATCH] " Declan Doherty
2 siblings, 2 replies; 9+ messages in thread
From: Herbert Guan @ 2017-07-10 11:13 UTC (permalink / raw)
To: dev, declan.doherty, jianbo.liu; +Cc: Herbert Guan
Patch V2: fix build warnings by deleting unused variables.
There were double-free problems in some test cases, which will cause
a duplicated mbuf will be added into mempool. After double-free,
some new allocated mbuf will hold a same address and thus cause the
memory corruption.
Another minor issue is that in some test cases, allocated mbuf will
not be released after test case exits. Hopefully these leaked mbuf
will be released by the next test case in its setup phase when
stopping the virtual pmd ports, while this do is a memory leak of
the exited test case.
To fix above 2 issues, this patch will do:
1) Release virtual pmd ports' tx queue in the clean up function
remove_slaves_and_stop_bonded_device() of each test cases.
2) Do not release allocated mbufs for test bursts. These mbufs
will be released in remove_slaves_and_stop_bonded_device() when
test case exits.
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
---
test/test/test_link_bonding.c | 64 ++++++-------------------------------------
1 file changed, 9 insertions(+), 55 deletions(-)
diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
index aa2a1a2..140d864 100644
--- a/test/test/test_link_bonding.c
+++ b/test/test/test_link_bonding.c
@@ -221,6 +221,10 @@ struct rte_fdir_conf fdir_conf = {
};
+static void free_virtualpmd_tx_queue(void);
+
+
+
static int
configure_ethdev(uint8_t port_id, uint8_t start, uint8_t en_isr)
{
@@ -684,6 +688,7 @@ struct rte_fdir_conf fdir_conf = {
remove_slaves_and_stop_bonded_device(void)
{
/* Clean up and remove slaves from bonded device */
+ free_virtualpmd_tx_queue();
while (test_params->bonded_slave_count > 0)
TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
"test_remove_slave_from_bonded_device failed");
@@ -1621,9 +1626,6 @@ struct rte_fdir_conf fdir_conf = {
/* free mbufs */
for (i = 0; i < MAX_PKT_BURST; i++) {
- if (gen_pkt_burst[i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[i]);
-
if (rx_pkt_burst[i] != NULL)
rte_pktmbuf_free(rx_pkt_burst[i]);
}
@@ -1970,12 +1972,6 @@ struct rte_fdir_conf fdir_conf = {
for (i = 0; i < MAX_PKT_BURST; i++) {
if (rx_pkt_burst[i] != NULL)
rte_pktmbuf_free(rx_pkt_burst[i]);
-
- if (gen_pkt_burst[1][i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[1][i]);
-
- if (gen_pkt_burst[3][i] != NULL)
- rte_pktmbuf_free(gen_pkt_burst[1][i]);
}
/* Clean up and remove slaves from bonded device */
@@ -2414,7 +2410,7 @@ struct rte_fdir_conf fdir_conf = {
uint8_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count, primary_port;
+ int i, burst_size, slave_count, primary_port;
burst_size = 21;
@@ -2547,16 +2543,6 @@ struct rte_fdir_conf fdir_conf = {
"(%d) port_stats.opackets not as expected",
test_params->slave_port_ids[3]);
- /* free mbufs */
- for (i = 0; i < TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
@@ -3318,7 +3304,7 @@ struct rte_fdir_conf fdir_conf = {
uint8_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count;
+ int i, burst_size, slave_count;
memset(pkt_burst, 0, sizeof(pkt_burst));
@@ -3456,16 +3442,6 @@ struct rte_fdir_conf fdir_conf = {
test_params->bonded_port_id, (int)port_stats.ipackets,
burst_size * 3);
- /* free mbufs allocate for rx testing */
- for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
@@ -3887,7 +3863,7 @@ struct rte_fdir_conf fdir_conf = {
uint8_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count;
+ int i, burst_size, slave_count;
memset(pkt_burst, 0, sizeof(pkt_burst));
@@ -3984,16 +3960,6 @@ struct rte_fdir_conf fdir_conf = {
"(%d) port_stats.ipackets not as expected\n",
test_params->bonded_port_id);
- /* free mbufs allocate for rx testing */
- for (i = 0; i < BROADCAST_LINK_STATUS_NUM_OF_SLAVES; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
@@ -4409,7 +4375,7 @@ struct rte_fdir_conf fdir_conf = {
uint8_t slaves[RTE_MAX_ETHPORTS];
- int i, j, burst_size, slave_count, primary_port;
+ int i, burst_size, slave_count, primary_port;
burst_size = 21;
@@ -4527,18 +4493,6 @@ struct rte_fdir_conf fdir_conf = {
"(%d) port_stats.ipackets not as expected\n",
test_params->bonded_port_id);
- /* free mbufs */
-
- for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
- for (j = 0; j < MAX_PKT_BURST; j++) {
- if (pkt_burst[i][j] != NULL) {
- rte_pktmbuf_free(pkt_burst[i][j]);
- pkt_burst[i][j] = NULL;
- }
- }
- }
-
-
/* Clean up and remove slaves from bonded device */
return remove_slaves_and_stop_bonded_device();
}
--
1.8.3.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-10 7:20 [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test Herbert Guan
2017-07-10 7:55 ` Jianbo Liu
2017-07-10 11:13 ` [dpdk-dev] [PATCH v2] " Herbert Guan
@ 2017-07-12 9:59 ` Declan Doherty
2017-07-12 10:16 ` Declan Doherty
2 siblings, 1 reply; 9+ messages in thread
From: Declan Doherty @ 2017-07-12 9:59 UTC (permalink / raw)
To: Herbert Guan, dev, jianbo.liu
On 10/07/2017 8:20 AM, Herbert Guan wrote:
> There were double-free problems in some test cases of link_bonding,
> which will cause a duplicated mbuf will be added into mempool. After
> double-free, some new allocated mbuf will hold a same address and
> thus cause the memory corruption.
>
> Another minor issue is that in some test cases, allocated mbuf will
> not be released after test case exits. Hopefully these leaked mbuf
> will be released by the next test case in its setup phase when
> stopping the virtual pmd ports, while this do is a memory leak of
> the exited test case.
>
> To fix above 2 issues, this patch will do:
> 1) Release virtual pmd ports' tx queue in the clean up function
> remove_slaves_and_stop_bonded_device() of each test cases.
> 2) Do not release allocated mbufs for test bursts. These mbufs
> will be released in remove_slaves_and_stop_bonded_device() when
> test case exits.
>
> Signed-off-by: Herbert Guan <herbert.guan@arm.com>
> ---
...
>
Hey Herbert,
I'm seeing compilation warnings for unused variables when I apply this
patch, otherwise these changes look good.
CC test_link_bonding.o
/home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:2407:9:
error: unused variable 'j'
[-Werror,-Wunused-variable]
int i, j, burst_size, slave_count, primary_port;
^
/home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:3301:9:
error: unused variable 'j'
[-Werror,-Wunused-variable]
int i, j, burst_size, slave_count;
^
/home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:3860:9:
error: unused variable 'j'
[-Werror,-Wunused-variable]
int i, j, burst_size, slave_count;
^
/home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:4372:9:
error: unused variable 'j'
[-Werror,-Wunused-variable]
int i, j, burst_size, slave_count, primary_port;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-12 9:59 ` [dpdk-dev] [PATCH] " Declan Doherty
@ 2017-07-12 10:16 ` Declan Doherty
0 siblings, 0 replies; 9+ messages in thread
From: Declan Doherty @ 2017-07-12 10:16 UTC (permalink / raw)
To: Herbert Guan, dev, jianbo.liu
On 12/07/17 10:59, Declan Doherty wrote:
> On 10/07/2017 8:20 AM, Herbert Guan wrote:
...
>
> Hey Herbert,
>
> I'm seeing compilation warnings for unused variables when I apply this
> patch, otherwise these changes look good.
>
> CC test_link_bonding.o
> /home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:2407:9:
> error: unused variable 'j'
> [-Werror,-Wunused-variable]
> int i, j, burst_size, slave_count, primary_port;
> ^
> /home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:3301:9:
> error: unused variable 'j'
> [-Werror,-Wunused-variable]
> int i, j, burst_size, slave_count;
> ^
> /home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:3860:9:
> error: unused variable 'j'
> [-Werror,-Wunused-variable]
> int i, j, burst_size, slave_count;
> ^
> /home/declan/Development/dpdk-org/master/test/test/test_link_bonding.c:4372:9:
> error: unused variable 'j'
> [-Werror,-Wunused-variable]
> int i, j, burst_size, slave_count, primary_port;
>
Apologies, my outlook mail filter missed your v2 patch, so you can
ignore this.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH v2] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-10 11:13 ` [dpdk-dev] [PATCH v2] " Herbert Guan
@ 2017-07-12 10:23 ` Declan Doherty
2017-07-31 15:25 ` Ferruh Yigit
2017-07-18 16:13 ` Ferruh Yigit
1 sibling, 1 reply; 9+ messages in thread
From: Declan Doherty @ 2017-07-12 10:23 UTC (permalink / raw)
To: Herbert Guan, dev, jianbo.liu
On 10/07/17 12:13, Herbert Guan wrote:
> Patch V2: fix build warnings by deleting unused variables.
>
> There were double-free problems in some test cases, which will cause
> a duplicated mbuf will be added into mempool. After double-free,
> some new allocated mbuf will hold a same address and thus cause the
> memory corruption.
>
> Another minor issue is that in some test cases, allocated mbuf will
> not be released after test case exits. Hopefully these leaked mbuf
> will be released by the next test case in its setup phase when
> stopping the virtual pmd ports, while this do is a memory leak of
> the exited test case.
>
> To fix above 2 issues, this patch will do:
> 1) Release virtual pmd ports' tx queue in the clean up function
> remove_slaves_and_stop_bonded_device() of each test cases.
> 2) Do not release allocated mbufs for test bursts. These mbufs
> will be released in remove_slaves_and_stop_bonded_device() when
> test case exits.
>
> Signed-off-by: Herbert Guan <herbert.guan@arm.com>
> ---
...
>
Acked-by: Declan Doherty <declan.doherty@intel.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH v2] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-10 11:13 ` [dpdk-dev] [PATCH v2] " Herbert Guan
2017-07-12 10:23 ` Declan Doherty
@ 2017-07-18 16:13 ` Ferruh Yigit
2017-07-19 1:54 ` Herbert Guan
1 sibling, 1 reply; 9+ messages in thread
From: Ferruh Yigit @ 2017-07-18 16:13 UTC (permalink / raw)
To: Herbert Guan, dev, declan.doherty, jianbo.liu
On 7/10/2017 12:13 PM, Herbert Guan wrote:
> Patch V2: fix build warnings by deleting unused variables.
>
> There were double-free problems in some test cases, which will cause
> a duplicated mbuf will be added into mempool. After double-free,
> some new allocated mbuf will hold a same address and thus cause the
> memory corruption.
>
> Another minor issue is that in some test cases, allocated mbuf will
> not be released after test case exits. Hopefully these leaked mbuf
> will be released by the next test case in its setup phase when
> stopping the virtual pmd ports, while this do is a memory leak of
> the exited test case.
>
> To fix above 2 issues, this patch will do:
> 1) Release virtual pmd ports' tx queue in the clean up function
> remove_slaves_and_stop_bonded_device() of each test cases.
> 2) Do not release allocated mbufs for test bursts. These mbufs
> will be released in remove_slaves_and_stop_bonded_device() when
> test case exits.
>
> Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Updated unit test causing segfault, before and after patch, am I doing
something wrong?
I will postpone this patch until unit test can be verified.
Thanks,
ferruh
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH v2] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-18 16:13 ` Ferruh Yigit
@ 2017-07-19 1:54 ` Herbert Guan
0 siblings, 0 replies; 9+ messages in thread
From: Herbert Guan @ 2017-07-19 1:54 UTC (permalink / raw)
To: Ferruh Yigit, dev, declan.doherty, jianbo.liu
It's caused by some recent merges. Applying this patch to 17.05 is okay. I've identified the place of segfault, but there're still some other problems to this test case.
Thanks,
Herbert
-----Original Message-----
From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
Sent: Wednesday, July 19, 2017 0:14
To: Herbert Guan <Herbert.Guan@arm.com>; dev@dpdk.org; declan.doherty@intel.com; jianbo.liu@linaro.org
Subject: Re: [dpdk-dev] [PATCH v2] test: Fix memory corruption issues which fails the link_bonding test.
On 7/10/2017 12:13 PM, Herbert Guan wrote:
> Patch V2: fix build warnings by deleting unused variables.
>
> There were double-free problems in some test cases, which will cause a
> duplicated mbuf will be added into mempool. After double-free, some
> new allocated mbuf will hold a same address and thus cause the memory
> corruption.
>
> Another minor issue is that in some test cases, allocated mbuf will
> not be released after test case exits. Hopefully these leaked mbuf
> will be released by the next test case in its setup phase when
> stopping the virtual pmd ports, while this do is a memory leak of the
> exited test case.
>
> To fix above 2 issues, this patch will do:
> 1) Release virtual pmd ports' tx queue in the clean up function
> remove_slaves_and_stop_bonded_device() of each test cases.
> 2) Do not release allocated mbufs for test bursts. These mbufs
> will be released in remove_slaves_and_stop_bonded_device() when
> test case exits.
>
> Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Updated unit test causing segfault, before and after patch, am I doing something wrong?
I will postpone this patch until unit test can be verified.
Thanks,
ferruh
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [dpdk-dev] [PATCH v2] test: Fix memory corruption issues which fails the link_bonding test.
2017-07-12 10:23 ` Declan Doherty
@ 2017-07-31 15:25 ` Ferruh Yigit
0 siblings, 0 replies; 9+ messages in thread
From: Ferruh Yigit @ 2017-07-31 15:25 UTC (permalink / raw)
To: Declan Doherty, Herbert Guan, dev, jianbo.liu
On 7/12/2017 11:23 AM, Declan Doherty wrote:
> On 10/07/17 12:13, Herbert Guan wrote:
>> Patch V2: fix build warnings by deleting unused variables.
>>
>> There were double-free problems in some test cases, which will cause
>> a duplicated mbuf will be added into mempool. After double-free,
>> some new allocated mbuf will hold a same address and thus cause the
>> memory corruption.
>>
>> Another minor issue is that in some test cases, allocated mbuf will
>> not be released after test case exits. Hopefully these leaked mbuf
>> will be released by the next test case in its setup phase when
>> stopping the virtual pmd ports, while this do is a memory leak of
>> the exited test case.
>>
>> To fix above 2 issues, this patch will do:
>> 1) Release virtual pmd ports' tx queue in the clean up function
>> remove_slaves_and_stop_bonded_device() of each test cases.
>> 2) Do not release allocated mbufs for test bursts. These mbufs
>> will be released in remove_slaves_and_stop_bonded_device() when
>> test case exits.
>>
>> Signed-off-by: Herbert Guan <herbert.guan@arm.com>
>> ---
> ...
>>
>
> Acked-by: Declan Doherty <declan.doherty@intel.com>
Applied to dpdk-next-net/master, thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-07-31 15:25 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-10 7:20 [dpdk-dev] [PATCH] test: Fix memory corruption issues which fails the link_bonding test Herbert Guan
2017-07-10 7:55 ` Jianbo Liu
2017-07-10 11:13 ` [dpdk-dev] [PATCH v2] " Herbert Guan
2017-07-12 10:23 ` Declan Doherty
2017-07-31 15:25 ` Ferruh Yigit
2017-07-18 16:13 ` Ferruh Yigit
2017-07-19 1:54 ` Herbert Guan
2017-07-12 9:59 ` [dpdk-dev] [PATCH] " Declan Doherty
2017-07-12 10:16 ` Declan Doherty
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).