From: Anatoly Burakov <anatoly.burakov@intel.com>
To: dev@dpdk.org
Cc: Bruce Richardson <bruce.richardson@intel.com>,
thomas@monjalon.net, shahafs@mellanox.com,
hemant.agrawal@nxp.com, gaetan.rivet@6wind.com,
anatoly.burakov@intel.com
Subject: [dpdk-dev] [PATCH v2] eal/vfio: export all VFIO functions when not compiling VFIO
Date: Mon, 16 Apr 2018 13:13:56 +0100 [thread overview]
Message-ID: <f3bc96bb9888b3c0711718e61057f38034007030.1523880693.git.anatoly.burakov@intel.com> (raw)
In-Reply-To: <b5e952a1b034a9f614225a506431f808ee4fb5b7.1523875496.git.anatoly.burakov@intel.com>
Previously, VFIO functions were not compiled in and exported if
VFIO compilation was disabled. Fix this by actually compiling
all of the functions unconditionally, , and provide missing
prototypes on Linux.
Fixes: 279b581c897d ("vfio: expose functions")
Fixes: 73a639085938 ("vfio: allow to map other memory regions")
Fixes: 964b2f3bfb07 ("vfio: export some internal functions")
Cc: hemant.agrawal@nxp.com
Cc: gaetan.rivet@6wind.com
Cc: anatoly.burakov@intel.com
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
Notes:
v2:
- Move "extern C" declaration to top of the file
- Add comment for closing #endif in .c file
lib/librte_eal/bsdapp/eal/eal.c | 15 +-------
lib/librte_eal/common/include/rte_vfio.h | 17 +++++----
lib/librte_eal/linuxapp/eal/eal_vfio.c | 62 +++++++++++++++++++++++++++++++-
3 files changed, 73 insertions(+), 21 deletions(-)
diff --git a/lib/librte_eal/bsdapp/eal/eal.c b/lib/librte_eal/bsdapp/eal/eal.c
index bfbec0d..d996190 100644
--- a/lib/librte_eal/bsdapp/eal/eal.c
+++ b/lib/librte_eal/bsdapp/eal/eal.c
@@ -40,6 +40,7 @@
#include <rte_dev.h>
#include <rte_devargs.h>
#include <rte_version.h>
+#include <rte_vfio.h>
#include <rte_atomic.h>
#include <malloc_heap.h>
@@ -756,20 +757,6 @@ rte_eal_vfio_intr_mode(void)
return RTE_INTR_MODE_NONE;
}
-/* dummy forward declaration. */
-struct vfio_device_info;
-
-/* dummy prototypes. */
-int rte_vfio_setup_device(const char *sysfs_base, const char *dev_addr,
- int *vfio_dev_fd, struct vfio_device_info *device_info);
-int rte_vfio_release_device(const char *sysfs_base, const char *dev_addr, int fd);
-int rte_vfio_enable(const char *modname);
-int rte_vfio_is_enabled(const char *modname);
-int rte_vfio_noiommu_is_enabled(void);
-int rte_vfio_clear_group(int vfio_group_fd);
-int rte_vfio_dma_map(uint64_t vaddr, uint64_t iova, uint64_t len);
-int rte_vfio_dma_unmap(uint64_t vaddr, uint64_t iova, uint64_t len);
-
int rte_vfio_setup_device(__rte_unused const char *sysfs_base,
__rte_unused const char *dev_addr,
__rte_unused int *vfio_dev_fd,
diff --git a/lib/librte_eal/common/include/rte_vfio.h b/lib/librte_eal/common/include/rte_vfio.h
index c4a2e60..8900064 100644
--- a/lib/librte_eal/common/include/rte_vfio.h
+++ b/lib/librte_eal/common/include/rte_vfio.h
@@ -10,6 +10,10 @@
* RTE VFIO. This library provides various VFIO related utility functions.
*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
/*
* determine if VFIO is present on the system
*/
@@ -33,10 +37,6 @@
#define VFIO_NOIOMMU_MODE \
"/sys/module/vfio/parameters/enable_unsafe_noiommu_mode"
-#ifdef __cplusplus
-extern "C" {
-#endif
-
/* NOIOMMU is defined from kernel version 4.5 onwards */
#ifdef VFIO_NOIOMMU_IOMMU
#define RTE_VFIO_NOIOMMU VFIO_NOIOMMU_IOMMU
@@ -44,6 +44,13 @@ extern "C" {
#define RTE_VFIO_NOIOMMU 8
#endif
+#else /* not VFIO_PRESENT */
+
+/* we don't need an actual definition, only pointer is used */
+struct vfio_device_info;
+
+#endif /* VFIO_PRESENT */
+
/**
* Setup vfio_cfg for the device identified by its address.
* It discovers the configured I/O MMU groups or sets a new one for the device.
@@ -249,6 +256,4 @@ rte_vfio_get_group_fd(int iommu_group_num);
}
#endif
-#endif /* VFIO_PRESENT */
-
#endif /* _RTE_VFIO_H_ */
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c
index 16ee730..def71a6 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c
@@ -1547,4 +1547,64 @@ rte_vfio_dma_unmap(uint64_t __rte_unused vaddr, uint64_t __rte_unused iova,
return -1;
}
-#endif
+int
+rte_vfio_setup_device(__rte_unused const char *sysfs_base,
+ __rte_unused const char *dev_addr,
+ __rte_unused int *vfio_dev_fd,
+ __rte_unused struct vfio_device_info *device_info)
+{
+ return -1;
+}
+
+int
+rte_vfio_release_device(__rte_unused const char *sysfs_base,
+ __rte_unused const char *dev_addr, __rte_unused int fd)
+{
+ return -1;
+}
+
+int
+rte_vfio_enable(__rte_unused const char *modname)
+{
+ return -1;
+}
+
+int
+rte_vfio_is_enabled(__rte_unused const char *modname)
+{
+ return -1;
+}
+
+int
+rte_vfio_noiommu_is_enabled(void)
+{
+ return -1;
+}
+
+int
+rte_vfio_clear_group(__rte_unused int vfio_group_fd)
+{
+ return -1;
+}
+
+int __rte_experimental
+rte_vfio_get_group_num(__rte_unused const char *sysfs_base,
+ __rte_unused const char *dev_addr,
+ __rte_unused int *iommu_group_num)
+{
+ return -1;
+}
+
+int __rte_experimental
+rte_vfio_get_container_fd(void)
+{
+ return -1;
+}
+
+int __rte_experimental
+rte_vfio_get_group_fd(__rte_unused int iommu_group_num)
+{
+ return -1;
+}
+
+#endif /* VFIO_PRESENT */
--
2.7.4
next prev parent reply other threads:[~2018-04-16 12:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-16 10:59 [dpdk-dev] [PATCH] " Anatoly Burakov
2018-04-16 11:55 ` Thomas Monjalon
2018-04-16 12:05 ` Burakov, Anatoly
2018-04-16 12:13 ` Anatoly Burakov [this message]
2018-04-16 17:27 ` [dpdk-dev] [PATCH v2] " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f3bc96bb9888b3c0711718e61057f38034007030.1523880693.git.anatoly.burakov@intel.com \
--to=anatoly.burakov@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gaetan.rivet@6wind.com \
--cc=hemant.agrawal@nxp.com \
--cc=shahafs@mellanox.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).