* [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file
@ 2018-04-05 14:37 Jay Zhou
2018-04-05 14:41 ` Zhang, Roy Fan
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Jay Zhou @ 2018-04-05 14:37 UTC (permalink / raw)
To: dev
Cc: maxime.coquelin, jianfeng.tan, roy.fan.zhang, arei.gonglei,
weidong.huang, wangxinxin.wang, jianjay.zhou
Since the linux kernel header file virtio_crypto.h has been merged
in 4.9, if we include this header file directly, compilation will be
failed in the old kernels' environment, e.g. the vhost crypto backend
series.
Adding virtio_crypto.h in librte_vhost to make old kernels happy.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
---
lib/librte_vhost/virtio_crypto.h | 422 +++++++++++++++++++++++++++++++++++++++
1 file changed, 422 insertions(+)
create mode 100644 lib/librte_vhost/virtio_crypto.h
diff --git a/lib/librte_vhost/virtio_crypto.h b/lib/librte_vhost/virtio_crypto.h
new file mode 100644
index 0000000..e3b9357
--- /dev/null
+++ b/lib/librte_vhost/virtio_crypto.h
@@ -0,0 +1,422 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 HUAWEI TECHNOLOGIES CO., LTD.
+ */
+
+#ifndef _VIRTIO_CRYPTO_H
+#define _VIRTIO_CRYPTO_H
+
+#define VIRTIO_CRYPTO_SERVICE_CIPHER 0
+#define VIRTIO_CRYPTO_SERVICE_HASH 1
+#define VIRTIO_CRYPTO_SERVICE_MAC 2
+#define VIRTIO_CRYPTO_SERVICE_AEAD 3
+
+#define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op))
+
+struct virtio_crypto_ctrl_header {
+#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02)
+#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x03)
+#define VIRTIO_CRYPTO_HASH_CREATE_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02)
+#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03)
+#define VIRTIO_CRYPTO_MAC_CREATE_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02)
+#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03)
+#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02)
+#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03)
+ uint32_t opcode;
+ uint32_t algo;
+ uint32_t flag;
+ /* data virtqueue id */
+ uint32_t queue_id;
+};
+
+struct virtio_crypto_cipher_session_para {
+#define VIRTIO_CRYPTO_NO_CIPHER 0
+#define VIRTIO_CRYPTO_CIPHER_ARC4 1
+#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2
+#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3
+#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4
+#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5
+#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6
+#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7
+#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8
+#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9
+#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10
+#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11
+#define VIRTIO_CRYPTO_CIPHER_AES_F8 12
+#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13
+#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14
+ uint32_t algo;
+ /* length of key */
+ uint32_t keylen;
+
+#define VIRTIO_CRYPTO_OP_ENCRYPT 1
+#define VIRTIO_CRYPTO_OP_DECRYPT 2
+ /* encrypt or decrypt */
+ uint32_t op;
+ uint32_t padding;
+};
+
+struct virtio_crypto_session_input {
+ /* Device-writable part */
+ uint64_t session_id;
+ uint32_t status;
+ uint32_t padding;
+};
+
+struct virtio_crypto_cipher_session_req {
+ struct virtio_crypto_cipher_session_para para;
+ uint8_t padding[32];
+};
+
+struct virtio_crypto_hash_session_para {
+#define VIRTIO_CRYPTO_NO_HASH 0
+#define VIRTIO_CRYPTO_HASH_MD5 1
+#define VIRTIO_CRYPTO_HASH_SHA1 2
+#define VIRTIO_CRYPTO_HASH_SHA_224 3
+#define VIRTIO_CRYPTO_HASH_SHA_256 4
+#define VIRTIO_CRYPTO_HASH_SHA_384 5
+#define VIRTIO_CRYPTO_HASH_SHA_512 6
+#define VIRTIO_CRYPTO_HASH_SHA3_224 7
+#define VIRTIO_CRYPTO_HASH_SHA3_256 8
+#define VIRTIO_CRYPTO_HASH_SHA3_384 9
+#define VIRTIO_CRYPTO_HASH_SHA3_512 10
+#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11
+#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12
+ uint32_t algo;
+ /* hash result length */
+ uint32_t hash_result_len;
+ uint8_t padding[8];
+};
+
+struct virtio_crypto_hash_create_session_req {
+ struct virtio_crypto_hash_session_para para;
+ uint8_t padding[40];
+};
+
+struct virtio_crypto_mac_session_para {
+#define VIRTIO_CRYPTO_NO_MAC 0
+#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1
+#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2
+#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3
+#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4
+#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5
+#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6
+#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25
+#define VIRTIO_CRYPTO_MAC_CMAC_AES 26
+#define VIRTIO_CRYPTO_MAC_KASUMI_F9 27
+#define VIRTIO_CRYPTO_MAC_SNOW3G_UIA2 28
+#define VIRTIO_CRYPTO_MAC_GMAC_AES 41
+#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42
+#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49
+#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50
+#define VIRTIO_CRYPTO_MAC_XCBC_AES 53
+ uint32_t algo;
+ /* hash result length */
+ uint32_t hash_result_len;
+ /* length of authenticated key */
+ uint32_t auth_key_len;
+ uint32_t padding;
+};
+
+struct virtio_crypto_mac_create_session_req {
+ struct virtio_crypto_mac_session_para para;
+ uint8_t padding[40];
+};
+
+struct virtio_crypto_aead_session_para {
+#define VIRTIO_CRYPTO_NO_AEAD 0
+#define VIRTIO_CRYPTO_AEAD_GCM 1
+#define VIRTIO_CRYPTO_AEAD_CCM 2
+#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3
+ uint32_t algo;
+ /* length of key */
+ uint32_t key_len;
+ /* hash result length */
+ uint32_t hash_result_len;
+ /* length of the additional authenticated data (AAD) in bytes */
+ uint32_t aad_len;
+ /* encrypt or decrypt, See above VIRTIO_CRYPTO_OP_* */
+ uint32_t op;
+ uint32_t padding;
+};
+
+struct virtio_crypto_aead_create_session_req {
+ struct virtio_crypto_aead_session_para para;
+ uint8_t padding[32];
+};
+
+struct virtio_crypto_alg_chain_session_para {
+#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1
+#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2
+ uint32_t alg_chain_order;
+/* Plain hash */
+#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1
+/* Authenticated hash (mac) */
+#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2
+/* Nested hash */
+#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3
+ uint32_t hash_mode;
+ struct virtio_crypto_cipher_session_para cipher_param;
+ union {
+ struct virtio_crypto_hash_session_para hash_param;
+ struct virtio_crypto_mac_session_para mac_param;
+ uint8_t padding[16];
+ } u;
+ /* length of the additional authenticated data (AAD) in bytes */
+ uint32_t aad_len;
+ uint32_t padding;
+};
+
+struct virtio_crypto_alg_chain_session_req {
+ struct virtio_crypto_alg_chain_session_para para;
+};
+
+struct virtio_crypto_sym_create_session_req {
+ union {
+ struct virtio_crypto_cipher_session_req cipher;
+ struct virtio_crypto_alg_chain_session_req chain;
+ uint8_t padding[48];
+ } u;
+
+ /* Device-readable part */
+
+/* No operation */
+#define VIRTIO_CRYPTO_SYM_OP_NONE 0
+/* Cipher only operation on the data */
+#define VIRTIO_CRYPTO_SYM_OP_CIPHER 1
+/*
+ * Chain any cipher with any hash or mac operation. The order
+ * depends on the value of alg_chain_order param
+ */
+#define VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING 2
+ uint32_t op_type;
+ uint32_t padding;
+};
+
+struct virtio_crypto_destroy_session_req {
+ /* Device-readable part */
+ uint64_t session_id;
+ uint8_t padding[48];
+};
+
+/* The request of the control virtqueue's packet */
+struct virtio_crypto_op_ctrl_req {
+ struct virtio_crypto_ctrl_header header;
+
+ union {
+ struct virtio_crypto_sym_create_session_req
+ sym_create_session;
+ struct virtio_crypto_hash_create_session_req
+ hash_create_session;
+ struct virtio_crypto_mac_create_session_req
+ mac_create_session;
+ struct virtio_crypto_aead_create_session_req
+ aead_create_session;
+ struct virtio_crypto_destroy_session_req
+ destroy_session;
+ uint8_t padding[56];
+ } u;
+};
+
+struct virtio_crypto_op_header {
+#define VIRTIO_CRYPTO_CIPHER_ENCRYPT \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x00)
+#define VIRTIO_CRYPTO_CIPHER_DECRYPT \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x01)
+#define VIRTIO_CRYPTO_HASH \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x00)
+#define VIRTIO_CRYPTO_MAC \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00)
+#define VIRTIO_CRYPTO_AEAD_ENCRYPT \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00)
+#define VIRTIO_CRYPTO_AEAD_DECRYPT \
+ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01)
+ uint32_t opcode;
+ /* algo should be service-specific algorithms */
+ uint32_t algo;
+ /* session_id should be service-specific algorithms */
+ uint64_t session_id;
+ /* control flag to control the request */
+ uint32_t flag;
+ uint32_t padding;
+};
+
+struct virtio_crypto_cipher_para {
+ /*
+ * Byte Length of valid IV/Counter
+ *
+ * For block ciphers in CBC or F8 mode, or for Kasumi in F8 mode, or for
+ * SNOW3G in UEA2 mode, this is the length of the IV (which
+ * must be the same as the block length of the cipher).
+ * For block ciphers in CTR mode, this is the length of the counter
+ * (which must be the same as the block length of the cipher).
+ * For AES-XTS, this is the 128bit tweak, i, from IEEE Std 1619-2007.
+ *
+ * The IV/Counter will be updated after every partial cryptographic
+ * operation.
+ */
+ uint32_t iv_len;
+ /* length of source data */
+ uint32_t src_data_len;
+ /* length of dst data */
+ uint32_t dst_data_len;
+ uint32_t padding;
+};
+
+struct virtio_crypto_hash_para {
+ /* length of source data */
+ uint32_t src_data_len;
+ /* hash result length */
+ uint32_t hash_result_len;
+};
+
+struct virtio_crypto_mac_para {
+ struct virtio_crypto_hash_para hash;
+};
+
+struct virtio_crypto_aead_para {
+ /*
+ * Byte Length of valid IV data pointed to by the below iv_addr
+ * parameter.
+ *
+ * For GCM mode, this is either 12 (for 96-bit IVs) or 16, in which
+ * case iv_addr points to J0.
+ * For CCM mode, this is the length of the nonce, which can be in the
+ * range 7 to 13 inclusive.
+ */
+ uint32_t iv_len;
+ /* length of additional auth data */
+ uint32_t aad_len;
+ /* length of source data */
+ uint32_t src_data_len;
+ /* length of dst data */
+ uint32_t dst_data_len;
+};
+
+struct virtio_crypto_cipher_data_req {
+ /* Device-readable part */
+ struct virtio_crypto_cipher_para para;
+ uint8_t padding[24];
+};
+
+struct virtio_crypto_hash_data_req {
+ /* Device-readable part */
+ struct virtio_crypto_hash_para para;
+ uint8_t padding[40];
+};
+
+struct virtio_crypto_mac_data_req {
+ /* Device-readable part */
+ struct virtio_crypto_mac_para para;
+ uint8_t padding[40];
+};
+
+struct virtio_crypto_alg_chain_data_para {
+ uint32_t iv_len;
+ /* Length of source data */
+ uint32_t src_data_len;
+ /* Length of destination data */
+ uint32_t dst_data_len;
+ /* Starting point for cipher processing in source data */
+ uint32_t cipher_start_src_offset;
+ /* Length of the source data that the cipher will be computed on */
+ uint32_t len_to_cipher;
+ /* Starting point for hash processing in source data */
+ uint32_t hash_start_src_offset;
+ /* Length of the source data that the hash will be computed on */
+ uint32_t len_to_hash;
+ /* Length of the additional auth data */
+ uint32_t aad_len;
+ /* Length of the hash result */
+ uint32_t hash_result_len;
+ uint32_t reserved;
+};
+
+struct virtio_crypto_alg_chain_data_req {
+ /* Device-readable part */
+ struct virtio_crypto_alg_chain_data_para para;
+};
+
+struct virtio_crypto_sym_data_req {
+ union {
+ struct virtio_crypto_cipher_data_req cipher;
+ struct virtio_crypto_alg_chain_data_req chain;
+ uint8_t padding[40];
+ } u;
+
+ /* See above VIRTIO_CRYPTO_SYM_OP_* */
+ uint32_t op_type;
+ uint32_t padding;
+};
+
+struct virtio_crypto_aead_data_req {
+ /* Device-readable part */
+ struct virtio_crypto_aead_para para;
+ uint8_t padding[32];
+};
+
+/* The request of the data virtqueue's packet */
+struct virtio_crypto_op_data_req {
+ struct virtio_crypto_op_header header;
+
+ union {
+ struct virtio_crypto_sym_data_req sym_req;
+ struct virtio_crypto_hash_data_req hash_req;
+ struct virtio_crypto_mac_data_req mac_req;
+ struct virtio_crypto_aead_data_req aead_req;
+ uint8_t padding[48];
+ } u;
+};
+
+#define VIRTIO_CRYPTO_OK 0
+#define VIRTIO_CRYPTO_ERR 1
+#define VIRTIO_CRYPTO_BADMSG 2
+#define VIRTIO_CRYPTO_NOTSUPP 3
+#define VIRTIO_CRYPTO_INVSESS 4 /* Invalid session id */
+
+/* The accelerator hardware is ready */
+#define VIRTIO_CRYPTO_S_HW_READY (1 << 0)
+
+struct virtio_crypto_config {
+ /* See VIRTIO_CRYPTO_OP_* above */
+ uint32_t status;
+
+ /*
+ * Maximum number of data queue
+ */
+ uint32_t max_dataqueues;
+
+ /*
+ * Specifies the services mask which the device support,
+ * see VIRTIO_CRYPTO_SERVICE_* above
+ */
+ uint32_t crypto_services;
+
+ /* Detailed algorithms mask */
+ uint32_t cipher_algo_l;
+ uint32_t cipher_algo_h;
+ uint32_t hash_algo;
+ uint32_t mac_algo_l;
+ uint32_t mac_algo_h;
+ uint32_t aead_algo;
+ /* Maximum length of cipher key */
+ uint32_t max_cipher_key_len;
+ /* Maximum length of authenticated key */
+ uint32_t max_auth_key_len;
+ uint32_t reserve;
+ /* Maximum size of each crypto request's content */
+ uint64_t max_size;
+};
+
+struct virtio_crypto_inhdr {
+ /* See VIRTIO_CRYPTO_* above */
+ uint8_t status;
+};
+#endif /* _VIRTIO_CRYPTO_H */
--
1.8.3.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file
2018-04-05 14:37 [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file Jay Zhou
@ 2018-04-05 14:41 ` Zhang, Roy Fan
2018-04-05 19:21 ` Maxime Coquelin
2018-04-05 19:40 ` Maxime Coquelin
2 siblings, 0 replies; 4+ messages in thread
From: Zhang, Roy Fan @ 2018-04-05 14:41 UTC (permalink / raw)
To: Jay Zhou, dev
Cc: maxime.coquelin, Tan, Jianfeng, arei.gonglei, weidong.huang,
wangxinxin.wang
> -----Original Message-----
> From: Jay Zhou [mailto:jianjay.zhou@huawei.com]
> Sent: Thursday, April 5, 2018 3:38 PM
> To: dev@dpdk.org
> Cc: maxime.coquelin@redhat.com; Tan, Jianfeng <jianfeng.tan@intel.com>;
> Zhang, Roy Fan <roy.fan.zhang@intel.com>; arei.gonglei@huawei.com;
> weidong.huang@huawei.com; wangxinxin.wang@huawei.com;
> jianjay.zhou@huawei.com
> Subject: [PATCH] lib/librte_vhost: add virtio_crypto.h header file
>
> Since the linux kernel header file virtio_crypto.h has been merged in 4.9, if
> we include this header file directly, compilation will be failed in the old
> kernels' environment, e.g. the vhost crypto backend series.
> Adding virtio_crypto.h in librte_vhost to make old kernels happy.
>
> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Thanks a lot Jay.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file
2018-04-05 14:37 [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file Jay Zhou
2018-04-05 14:41 ` Zhang, Roy Fan
@ 2018-04-05 19:21 ` Maxime Coquelin
2018-04-05 19:40 ` Maxime Coquelin
2 siblings, 0 replies; 4+ messages in thread
From: Maxime Coquelin @ 2018-04-05 19:21 UTC (permalink / raw)
To: Jay Zhou, dev
Cc: jianfeng.tan, roy.fan.zhang, arei.gonglei, weidong.huang,
wangxinxin.wang
On 04/05/2018 04:37 PM, Jay Zhou wrote:
> Since the linux kernel header file virtio_crypto.h has been merged
> in 4.9, if we include this header file directly, compilation will be
> failed in the old kernels' environment, e.g. the vhost crypto backend
> series.
> Adding virtio_crypto.h in librte_vhost to make old kernels happy.
>
> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
> ---
> lib/librte_vhost/virtio_crypto.h | 422 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 422 insertions(+)
> create mode 100644 lib/librte_vhost/virtio_crypto.h
>
Thanks Jay:
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file
2018-04-05 14:37 [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file Jay Zhou
2018-04-05 14:41 ` Zhang, Roy Fan
2018-04-05 19:21 ` Maxime Coquelin
@ 2018-04-05 19:40 ` Maxime Coquelin
2 siblings, 0 replies; 4+ messages in thread
From: Maxime Coquelin @ 2018-04-05 19:40 UTC (permalink / raw)
To: Jay Zhou, dev
Cc: jianfeng.tan, roy.fan.zhang, arei.gonglei, weidong.huang,
wangxinxin.wang
On 04/05/2018 04:37 PM, Jay Zhou wrote:
> Since the linux kernel header file virtio_crypto.h has been merged
> in 4.9, if we include this header file directly, compilation will be
> failed in the old kernels' environment, e.g. the vhost crypto backend
> series.
> Adding virtio_crypto.h in librte_vhost to make old kernels happy.
>
> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
> ---
> lib/librte_vhost/virtio_crypto.h | 422 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 422 insertions(+)
> create mode 100644 lib/librte_vhost/virtio_crypto.h
>
Applied to dpdk-ext-virtio/master
Thanks,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-04-05 19:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-05 14:37 [dpdk-dev] [PATCH] lib/librte_vhost: add virtio_crypto.h header file Jay Zhou
2018-04-05 14:41 ` Zhang, Roy Fan
2018-04-05 19:21 ` Maxime Coquelin
2018-04-05 19:40 ` Maxime Coquelin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).