From: Aaron Conole <aconole@redhat.com>
To: <pbhagavatula@marvell.com>
Cc: <arybchenko@solarflare.com>, <jerinj@marvell.com>,
Nicolas Chautru <nicolas.chautru@intel.com>,
Chas Williams <chas3@att.com>,
David Hunt <david.hunt@intel.com>,
Harry van Haaren <harry.van.haaren@intel.com>,
"Marko Kovacevic" <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
"Bruce Richardson" <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Bernard Iremonger <bernard.iremonger@intel.com>,
Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>,
Ferruh Yigit <ferruh.yigit@intel.com>,
"Declan Doherty" <declan.doherty@intel.com>,
Reshma Pattan <reshma.pattan@intel.com>,
John McNamara <john.mcnamara@intel.com>,
Xiaoyun Li <xiaoyun.li@intel.com>,
Jasvinder Singh <jasvinder.singh@intel.com>,
Byron Marohn <byron.marohn@intel.com>,
Yipeng Wang <yipeng1.wang@intel.com>,
"Maxime Coquelin" <maxime.coquelin@redhat.com>,
Tiwei Bie <tiwei.bie@intel.com>,
Zhihong Wang <zhihong.wang@intel.com>, <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v3 7/7] examples: disable Rx packet type parsing
Date: Mon, 30 Sep 2019 13:47:13 -0400 [thread overview]
Message-ID: <f7tk19p7k2m.fsf@dhcp-25.97.bos.redhat.com> (raw)
In-Reply-To: <20190929211916.31702-8-pbhagavatula@marvell.com> (pbhagavatula@marvell.com's message of "Mon, 30 Sep 2019 02:49:16 +0530")
<pbhagavatula@marvell.com> writes:
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> Disable packet type parsing in examples that don't use
> `rte_mbuf::packet_type` by setting ptype_mask as 0 in
> `rte_eth_dev_set_supported_ptypes`
>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
> ---
> examples/bbdev_app/main.c | 1 +
> examples/bond/main.c | 2 ++
> examples/distributor/Makefile | 1 +
> examples/distributor/main.c | 1 +
> examples/distributor/meson.build | 1 +
> examples/eventdev_pipeline/main.c | 1 +
> examples/eventdev_pipeline/meson.build | 1 +
> examples/exception_path/Makefile | 1 +
> examples/exception_path/main.c | 1 +
> examples/exception_path/meson.build | 1 +
> examples/flow_classify/flow_classify.c | 1 +
> examples/flow_filtering/Makefile | 1 +
> examples/flow_filtering/main.c | 1 +
> examples/flow_filtering/meson.build | 1 +
> examples/ip_pipeline/link.c | 1 +
> examples/ip_reassembly/Makefile | 1 +
> examples/ip_reassembly/main.c | 1 +
> examples/ip_reassembly/meson.build | 1 +
> examples/ipsec-secgw/ipsec-secgw.c | 1 +
> examples/ipv4_multicast/Makefile | 1 +
> examples/ipv4_multicast/main.c | 1 +
> examples/ipv4_multicast/meson.build | 1 +
> examples/kni/main.c | 1 +
> examples/l2fwd-cat/Makefile | 1 +
> examples/l2fwd-cat/l2fwd-cat.c | 1 +
> examples/l2fwd-cat/meson.build | 1 +
> examples/l2fwd-crypto/main.c | 1 +
> examples/l2fwd-jobstats/Makefile | 1 +
> examples/l2fwd-jobstats/main.c | 1 +
> examples/l2fwd-jobstats/meson.build | 1 +
> examples/l2fwd-keepalive/Makefile | 1 +
> examples/l2fwd-keepalive/main.c | 1 +
> examples/l2fwd-keepalive/meson.build | 1 +
> examples/l2fwd/Makefile | 1 +
> examples/l2fwd/main.c | 1 +
> examples/l2fwd/meson.build | 1 +
> examples/l3fwd-acl/Makefile | 1 +
> examples/l3fwd-acl/main.c | 1 +
> examples/l3fwd-acl/meson.build | 1 +
> examples/l3fwd-power/main.c | 1 +
> examples/l3fwd-vf/Makefile | 1 +
> examples/l3fwd-vf/main.c | 1 +
> examples/l3fwd-vf/meson.build | 1 +
> examples/link_status_interrupt/Makefile | 1 +
> examples/link_status_interrupt/main.c | 1 +
> examples/link_status_interrupt/meson.build | 1 +
> examples/load_balancer/Makefile | 1 +
> examples/load_balancer/init.c | 1 +
> examples/load_balancer/meson.build | 1 +
> examples/packet_ordering/Makefile | 1 +
> examples/packet_ordering/main.c | 1 +
> examples/packet_ordering/meson.build | 1 +
> examples/ptpclient/Makefile | 1 +
> examples/ptpclient/meson.build | 1 +
> examples/ptpclient/ptpclient.c | 1 +
> examples/qos_meter/Makefile | 1 +
> examples/qos_meter/main.c | 2 ++
> examples/qos_meter/meson.build | 1 +
> examples/qos_sched/Makefile | 1 +
> examples/qos_sched/init.c | 1 +
> examples/qos_sched/meson.build | 1 +
> examples/quota_watermark/qw/Makefile | 1 +
> examples/quota_watermark/qw/init.c | 1 +
> examples/rxtx_callbacks/main.c | 1 +
> examples/server_node_efd/server/Makefile | 1 +
> examples/server_node_efd/server/init.c | 1 +
> examples/skeleton/Makefile | 1 +
> examples/skeleton/basicfwd.c | 1 +
> examples/skeleton/meson.build | 1 +
> examples/tep_termination/Makefile | 1 +
> examples/tep_termination/meson.build | 1 +
> examples/tep_termination/vxlan_setup.c | 1 +
> examples/vhost/Makefile | 1 +
> examples/vhost/main.c | 1 +
> examples/vm_power_manager/Makefile | 1 +
> examples/vm_power_manager/main.c | 1 +
> examples/vm_power_manager/meson.build | 1 +
> examples/vmdq/Makefile | 1 +
> examples/vmdq/main.c | 1 +
> examples/vmdq/meson.build | 1 +
> examples/vmdq_dcb/Makefile | 1 +
> examples/vmdq_dcb/main.c | 1 +
> examples/vmdq_dcb/meson.build | 1 +
> 83 files changed, 85 insertions(+)
>
> diff --git a/examples/bbdev_app/main.c b/examples/bbdev_app/main.c
> index 9acf666dc..a32f63187 100644
> --- a/examples/bbdev_app/main.c
> +++ b/examples/bbdev_app/main.c
> @@ -478,6 +478,7 @@ initialize_ports(struct app_config_params *app_params,
> }
>
> rte_eth_promiscuous_enable(port_id);
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
This is strange, since the function signature is defined (in 1/7) as:
int rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
uint32_t *set_ptypes, int num);
Did you mean to add more args?
> rte_eth_macaddr_get(port_id, &bbdev_port_eth_addr);
> print_mac(port_id, &bbdev_port_eth_addr);
> diff --git a/examples/bond/main.c b/examples/bond/main.c
> index 1c0df9d46..8beb1dc14 100644
> --- a/examples/bond/main.c
> +++ b/examples/bond/main.c
> @@ -195,6 +195,7 @@ slave_port_init(uint16_t portid, struct rte_mempool *mbuf_pool)
> rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
> portid, retval);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(portid);
> if (retval < 0)
> rte_exit(retval,
> @@ -271,6 +272,7 @@ bond_port_init(struct rte_mempool *mbuf_pool)
> rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
> BOND_PORT, retval);
>
> + rte_eth_dev_set_supported_ptypes(BOND_PORT, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(BOND_PORT);
> if (retval < 0)
> rte_exit(retval, "Start port %d failed (res=%d)", BOND_PORT, retval);
> diff --git a/examples/distributor/Makefile b/examples/distributor/Makefile
> index bac8d5578..a2a477279 100644
> --- a/examples/distributor/Makefile
> +++ b/examples/distributor/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/distributor/main.c b/examples/distributor/main.c
> index 81d7ca61d..bc945d862 100644
> --- a/examples/distributor/main.c
> +++ b/examples/distributor/main.c
> @@ -162,6 +162,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> return retval;
> diff --git a/examples/distributor/meson.build b/examples/distributor/meson.build
> index 26f108d65..c2976f6bd 100644
> --- a/examples/distributor/meson.build
> +++ b/examples/distributor/meson.build
> @@ -10,6 +10,7 @@
> build = dpdk_conf.has('RTE_LIBRTE_POWER')
>
> deps += ['distributor', 'power']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/eventdev_pipeline/main.c b/examples/eventdev_pipeline/main.c
> index a73b61d59..9f9968cf8 100644
> --- a/examples/eventdev_pipeline/main.c
> +++ b/examples/eventdev_pipeline/main.c
> @@ -393,6 +393,7 @@ main(int argc, char **argv)
>
> /* Start the Ethernet port. */
> RTE_ETH_FOREACH_DEV(portid) {
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> err = rte_eth_dev_start(portid);
> if (err < 0)
> rte_exit(EXIT_FAILURE, "Error starting ethdev %d\n",
> diff --git a/examples/eventdev_pipeline/meson.build b/examples/eventdev_pipeline/meson.build
> index a54c35aa7..0fc916b05 100644
> --- a/examples/eventdev_pipeline/meson.build
> +++ b/examples/eventdev_pipeline/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'eventdev'
> +allow_experimental_apis = true
> sources = files(
> 'main.c',
> 'pipeline_worker_generic.c',
> diff --git a/examples/exception_path/Makefile b/examples/exception_path/Makefile
> index 90c7f133a..a7c961276 100644
> --- a/examples/exception_path/Makefile
> +++ b/examples/exception_path/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/exception_path/main.c b/examples/exception_path/main.c
> index 0d79e5a24..7dbc0970a 100644
> --- a/examples/exception_path/main.c
> +++ b/examples/exception_path/main.c
> @@ -464,6 +464,7 @@ init_port(uint16_t port)
> FATAL_ERROR("Could not setup up TX queue for port%u (%d)",
> port, ret);
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port);
> if (ret < 0)
> FATAL_ERROR("Could not start port%u (%d)", port, ret);
> diff --git a/examples/exception_path/meson.build b/examples/exception_path/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/exception_path/meson.build
> +++ b/examples/exception_path/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/flow_classify/flow_classify.c b/examples/flow_classify/flow_classify.c
> index bc7f43ea9..aa25218a3 100644
> --- a/examples/flow_classify/flow_classify.c
> +++ b/examples/flow_classify/flow_classify.c
> @@ -231,6 +231,7 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> }
>
> /* Start the Ethernet port. */
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> return retval;
> diff --git a/examples/flow_filtering/Makefile b/examples/flow_filtering/Makefile
> index a63a75555..793a08fae 100644
> --- a/examples/flow_filtering/Makefile
> +++ b/examples/flow_filtering/Makefile
> @@ -49,6 +49,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/flow_filtering/main.c b/examples/flow_filtering/main.c
> index a0487be77..fbd1b6cc2 100644
> --- a/examples/flow_filtering/main.c
> +++ b/examples/flow_filtering/main.c
> @@ -176,6 +176,7 @@ init_port(void)
> }
>
> rte_eth_promiscuous_enable(port_id);
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_id);
> if (ret < 0) {
> rte_exit(EXIT_FAILURE,
> diff --git a/examples/flow_filtering/meson.build b/examples/flow_filtering/meson.build
> index 407795c42..6f5d1b08a 100644
> --- a/examples/flow_filtering/meson.build
> +++ b/examples/flow_filtering/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c',
> )
> diff --git a/examples/ip_pipeline/link.c b/examples/ip_pipeline/link.c
> index 787eb866a..9f8b5b2ae 100644
> --- a/examples/ip_pipeline/link.c
> +++ b/examples/ip_pipeline/link.c
> @@ -205,6 +205,7 @@ link_create(const char *name, struct link_params *params)
> return NULL;
> }
>
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> /* Port start */
> status = rte_eth_dev_start(port_id);
> if (status < 0)
> diff --git a/examples/ip_reassembly/Makefile b/examples/ip_reassembly/Makefile
> index 0b1a904e0..19c462388 100644
> --- a/examples/ip_reassembly/Makefile
> +++ b/examples/ip_reassembly/Makefile
> @@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/ip_reassembly/main.c b/examples/ip_reassembly/main.c
> index 38b39be6b..ff5407892 100644
> --- a/examples/ip_reassembly/main.c
> +++ b/examples/ip_reassembly/main.c
> @@ -1158,6 +1158,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0) {
> continue;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/ip_reassembly/meson.build b/examples/ip_reassembly/meson.build
> index 8ebd48291..8a667c265 100644
> --- a/examples/ip_reassembly/meson.build
> +++ b/examples/ip_reassembly/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['lpm', 'ip_frag']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
> index 0d1fd6af6..619d248c8 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -2448,6 +2448,7 @@ main(int32_t argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /*
> * Start device
> * note: device must be started before a flow rule
> diff --git a/examples/ipv4_multicast/Makefile b/examples/ipv4_multicast/Makefile
> index 5f8a67dd4..5171f7ab2 100644
> --- a/examples/ipv4_multicast/Makefile
> +++ b/examples/ipv4_multicast/Makefile
> @@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/ipv4_multicast/main.c b/examples/ipv4_multicast/main.c
> index 72eaadc51..29b3fed9c 100644
> --- a/examples/ipv4_multicast/main.c
> +++ b/examples/ipv4_multicast/main.c
> @@ -765,6 +765,7 @@ main(int argc, char **argv)
> qconf->tx_queue_id[portid] = queueid;
> queueid++;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> rte_eth_allmulticast_enable(portid);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> diff --git a/examples/ipv4_multicast/meson.build b/examples/ipv4_multicast/meson.build
> index d9e4c7c21..6969e2c54 100644
> --- a/examples/ipv4_multicast/meson.build
> +++ b/examples/ipv4_multicast/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'hash'
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/kni/main.c b/examples/kni/main.c
> index 4710d7176..3163087ff 100644
> --- a/examples/kni/main.c
> +++ b/examples/kni/main.c
> @@ -625,6 +625,7 @@ init_port(uint16_t port)
> rte_exit(EXIT_FAILURE, "Could not setup up TX queue for "
> "port%u (%d)\n", (unsigned)port, ret);
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port);
> if (ret < 0)
> rte_exit(EXIT_FAILURE, "Could not start port%u (%d)\n",
> diff --git a/examples/l2fwd-cat/Makefile b/examples/l2fwd-cat/Makefile
> index c1960d6d3..d6a25e42a 100644
> --- a/examples/l2fwd-cat/Makefile
> +++ b/examples/l2fwd-cat/Makefile
> @@ -66,6 +66,7 @@ endif
> EXTRA_CFLAGS += -O3 -g -Wfatal-errors
>
> CFLAGS += -I$(PQOS_INSTALL_PATH)/../include
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> LDLIBS += -L$(PQOS_INSTALL_PATH)
> LDLIBS += -lpqos
> diff --git a/examples/l2fwd-cat/l2fwd-cat.c b/examples/l2fwd-cat/l2fwd-cat.c
> index b34b40a00..ddd9888b1 100644
> --- a/examples/l2fwd-cat/l2fwd-cat.c
> +++ b/examples/l2fwd-cat/l2fwd-cat.c
> @@ -67,6 +67,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/l2fwd-cat/meson.build b/examples/l2fwd-cat/meson.build
> index 4e2777a03..37c96040d 100644
> --- a/examples/l2fwd-cat/meson.build
> +++ b/examples/l2fwd-cat/meson.build
> @@ -10,6 +10,7 @@ pqos = cc.find_library('pqos', required: false)
> build = pqos.found()
> ext_deps += pqos
> cflags += '-I/usr/local/include' # assume pqos lib installed in /usr/local
> +allow_experimental_apis = true
> sources = files(
> 'cat.c', 'l2fwd-cat.c'
> )
> diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
> index 3fe2ba725..6aad08b06 100644
> --- a/examples/l2fwd-crypto/main.c
> +++ b/examples/l2fwd-crypto/main.c
> @@ -2559,6 +2559,7 @@ initialize_ports(struct l2fwd_crypto_options *options)
> return -1;
> }
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> retval = rte_eth_dev_start(portid);
> if (retval < 0) {
> diff --git a/examples/l2fwd-jobstats/Makefile b/examples/l2fwd-jobstats/Makefile
> index 729a39e93..09834e979 100644
> --- a/examples/l2fwd-jobstats/Makefile
> +++ b/examples/l2fwd-jobstats/Makefile
> @@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
> index 77e44dc82..61ad8e759 100644
> --- a/examples/l2fwd-jobstats/main.c
> +++ b/examples/l2fwd-jobstats/main.c
> @@ -902,6 +902,7 @@ main(int argc, char **argv)
> "Cannot set error callback for tx buffer on port %u\n",
> portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l2fwd-jobstats/meson.build b/examples/l2fwd-jobstats/meson.build
> index 1ffd484e2..3653aa7ec 100644
> --- a/examples/l2fwd-jobstats/meson.build
> +++ b/examples/l2fwd-jobstats/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['jobstats', 'timer']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/l2fwd-keepalive/Makefile b/examples/l2fwd-keepalive/Makefile
> index 37de27a6f..584257ae2 100644
> --- a/examples/l2fwd-keepalive/Makefile
> +++ b/examples/l2fwd-keepalive/Makefile
> @@ -53,6 +53,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
> LDFLAGS += -lrt
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
> index 9831a4323..bf662bd37 100644
> --- a/examples/l2fwd-keepalive/main.c
> +++ b/examples/l2fwd-keepalive/main.c
> @@ -696,6 +696,7 @@ main(int argc, char **argv)
> "Cannot set error callback for tx buffer on port %u\n",
> portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l2fwd-keepalive/meson.build b/examples/l2fwd-keepalive/meson.build
> index 6f7b007e1..2dffffaaa 100644
> --- a/examples/l2fwd-keepalive/meson.build
> +++ b/examples/l2fwd-keepalive/meson.build
> @@ -8,6 +8,7 @@
>
> ext_deps += cc.find_library('rt')
> deps += 'timer'
> +allow_experimental_apis = true
> sources = files(
> 'main.c', 'shm.c'
> )
> diff --git a/examples/l2fwd/Makefile b/examples/l2fwd/Makefile
> index 230352093..123e6161c 100644
> --- a/examples/l2fwd/Makefile
> +++ b/examples/l2fwd/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
> index 1e2b14297..1b940038f 100644
> --- a/examples/l2fwd/main.c
> +++ b/examples/l2fwd/main.c
> @@ -694,6 +694,7 @@ main(int argc, char **argv)
> "Cannot set error callback for tx buffer on port %u\n",
> portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l2fwd/meson.build b/examples/l2fwd/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/l2fwd/meson.build
> +++ b/examples/l2fwd/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/l3fwd-acl/Makefile b/examples/l3fwd-acl/Makefile
> index e2c989f71..df590f8e9 100644
> --- a/examples/l3fwd-acl/Makefile
> +++ b/examples/l3fwd-acl/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
> index 0c44df767..1a0c09c1d 100644
> --- a/examples/l3fwd-acl/main.c
> +++ b/examples/l3fwd-acl/main.c
> @@ -2056,6 +2056,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l3fwd-acl/meson.build b/examples/l3fwd-acl/meson.build
> index 7096e00c1..68cebd6ce 100644
> --- a/examples/l3fwd-acl/meson.build
> +++ b/examples/l3fwd-acl/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['acl', 'lpm', 'hash']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
> index fd8d9528f..136f446b3 100644
> --- a/examples/l3fwd-power/main.c
> +++ b/examples/l3fwd-power/main.c
> @@ -2426,6 +2426,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0) {
> continue;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l3fwd-vf/Makefile b/examples/l3fwd-vf/Makefile
> index 7b186a23c..db7f51f2f 100644
> --- a/examples/l3fwd-vf/Makefile
> +++ b/examples/l3fwd-vf/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3 $(USER_FLAGS)
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/l3fwd-vf/main.c b/examples/l3fwd-vf/main.c
> index 572e74cf5..387d2426c 100644
> --- a/examples/l3fwd-vf/main.c
> +++ b/examples/l3fwd-vf/main.c
> @@ -1051,6 +1051,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0) {
> continue;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l3fwd-vf/meson.build b/examples/l3fwd-vf/meson.build
> index 226286e74..00f3c38f4 100644
> --- a/examples/l3fwd-vf/meson.build
> +++ b/examples/l3fwd-vf/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['lpm', 'hash']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/link_status_interrupt/Makefile b/examples/link_status_interrupt/Makefile
> index 97e5a14a8..6ddedd4de 100644
> --- a/examples/link_status_interrupt/Makefile
> +++ b/examples/link_status_interrupt/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/link_status_interrupt/main.c b/examples/link_status_interrupt/main.c
> index 9cd4dc7a6..abd84b862 100644
> --- a/examples/link_status_interrupt/main.c
> +++ b/examples/link_status_interrupt/main.c
> @@ -676,6 +676,7 @@ main(int argc, char **argv)
> rte_exit(EXIT_FAILURE, "Cannot set error callback for "
> "tx buffer on port %u\n", (unsigned) portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/link_status_interrupt/meson.build b/examples/link_status_interrupt/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/link_status_interrupt/meson.build
> +++ b/examples/link_status_interrupt/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/load_balancer/Makefile b/examples/load_balancer/Makefile
> index caae8a107..dcba9194c 100644
> --- a/examples/load_balancer/Makefile
> +++ b/examples/load_balancer/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3 -g
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/load_balancer/init.c b/examples/load_balancer/init.c
> index 3ab7d0211..52f677fd4 100644
> --- a/examples/load_balancer/init.c
> +++ b/examples/load_balancer/init.c
> @@ -496,6 +496,7 @@ app_init_nics(void)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start port */
> ret = rte_eth_dev_start(port);
> if (ret < 0) {
> diff --git a/examples/load_balancer/meson.build b/examples/load_balancer/meson.build
> index 4f7ac3999..19708974c 100644
> --- a/examples/load_balancer/meson.build
> +++ b/examples/load_balancer/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'lpm'
> +allow_experimental_apis = true
> sources = files(
> 'config.c', 'init.c', 'main.c', 'runtime.c'
> )
> diff --git a/examples/packet_ordering/Makefile b/examples/packet_ordering/Makefile
> index 51acaf7eb..9ba3fa9e8 100644
> --- a/examples/packet_ordering/Makefile
> +++ b/examples/packet_ordering/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/packet_ordering/main.c b/examples/packet_ordering/main.c
> index 030e92299..41295690d 100644
> --- a/examples/packet_ordering/main.c
> +++ b/examples/packet_ordering/main.c
> @@ -312,6 +312,7 @@ configure_eth_port(uint16_t port_id)
> return ret;
> }
>
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_id);
> if (ret < 0)
> return ret;
> diff --git a/examples/packet_ordering/meson.build b/examples/packet_ordering/meson.build
> index 6c2fccdcb..a3776946f 100644
> --- a/examples/packet_ordering/meson.build
> +++ b/examples/packet_ordering/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'reorder'
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/ptpclient/Makefile b/examples/ptpclient/Makefile
> index 89e2bacbd..f158d96b9 100644
> --- a/examples/ptpclient/Makefile
> +++ b/examples/ptpclient/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
> CFLAGS += $(WERROR_FLAGS)
>
> # workaround for a gcc bug with noreturn attribute
> diff --git a/examples/ptpclient/meson.build b/examples/ptpclient/meson.build
> index fa0cbe93c..d4171a218 100644
> --- a/examples/ptpclient/meson.build
> +++ b/examples/ptpclient/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'ptpclient.c'
> )
> diff --git a/examples/ptpclient/ptpclient.c b/examples/ptpclient/ptpclient.c
> index 31778fd95..351596fc3 100644
> --- a/examples/ptpclient/ptpclient.c
> +++ b/examples/ptpclient/ptpclient.c
> @@ -227,6 +227,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/qos_meter/Makefile b/examples/qos_meter/Makefile
> index e5217cf7c..a1533d08f 100644
> --- a/examples/qos_meter/Makefile
> +++ b/examples/qos_meter/Makefile
> @@ -52,6 +52,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
> CFLAGS += $(WERROR_FLAGS)
>
> # workaround for a gcc bug with noreturn attribute
> diff --git a/examples/qos_meter/main.c b/examples/qos_meter/main.c
> index da7afe8be..2accbc9b6 100644
> --- a/examples/qos_meter/main.c
> +++ b/examples/qos_meter/main.c
> @@ -419,10 +419,12 @@ main(int argc, char **argv)
>
> rte_eth_tx_buffer_init(tx_buffer, PKT_TX_BURST_MAX);
>
> + rte_eth_dev_set_supported_ptypes(port_rx, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_rx);
> if (ret < 0)
> rte_exit(EXIT_FAILURE, "Port %d start error (%d)\n", port_rx, ret);
>
> + rte_eth_dev_set_supported_ptypes(port_tx, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_tx);
> if (ret < 0)
> rte_exit(EXIT_FAILURE, "Port %d start error (%d)\n", port_tx, ret);
> diff --git a/examples/qos_meter/meson.build b/examples/qos_meter/meson.build
> index ef7779f2f..10cd4bc79 100644
> --- a/examples/qos_meter/meson.build
> +++ b/examples/qos_meter/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'meter'
> +allow_experimental_apis = true
> sources = files(
> 'main.c', 'rte_policer.c'
> )
> diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile
> index ce2d25371..7d3d3019f 100644
> --- a/examples/qos_sched/Makefile
> +++ b/examples/qos_sched/Makefile
> @@ -58,6 +58,7 @@ else
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/qos_sched/init.c b/examples/qos_sched/init.c
> index b05206d5a..35e4c90a2 100644
> --- a/examples/qos_sched/init.c
> +++ b/examples/qos_sched/init.c
> @@ -138,6 +138,7 @@ app_init_port(uint16_t portid, struct rte_mempool *mp)
> "rte_eth_tx_queue_setup: err=%d, port=%u queue=%d\n",
> ret, portid, 0);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/qos_sched/meson.build b/examples/qos_sched/meson.build
> index 289b81ce8..5101652af 100644
> --- a/examples/qos_sched/meson.build
> +++ b/examples/qos_sched/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['sched', 'cfgfile']
> +allow_experimental_apis = true
> sources = files(
> 'app_thread.c', 'args.c', 'cfg_file.c', 'cmdline.c',
> 'init.c', 'main.c', 'stats.c'
> diff --git a/examples/quota_watermark/qw/Makefile b/examples/quota_watermark/qw/Makefile
> index 3f10f01c3..e06f4482b 100644
> --- a/examples/quota_watermark/qw/Makefile
> +++ b/examples/quota_watermark/qw/Makefile
> @@ -18,5 +18,6 @@ SRCS-y := args.c init.c main.c
>
> CFLAGS += -O3 -DQW_SOFTWARE_FC
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/quota_watermark/qw/init.c b/examples/quota_watermark/qw/init.c
> index 5a0f64f45..098e3c16e 100644
> --- a/examples/quota_watermark/qw/init.c
> +++ b/examples/quota_watermark/qw/init.c
> @@ -96,6 +96,7 @@ void configure_eth_port(uint16_t port_id)
> "Failed to setup hardware flow control on port %u (error %d)\n",
> (unsigned int) port_id, ret);
>
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> /* Start the port */
> ret = rte_eth_dev_start(port_id);
> if (ret < 0)
> diff --git a/examples/rxtx_callbacks/main.c b/examples/rxtx_callbacks/main.c
> index dbcd9f4fc..c4acac585 100644
> --- a/examples/rxtx_callbacks/main.c
> +++ b/examples/rxtx_callbacks/main.c
> @@ -152,6 +152,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> return retval;
> diff --git a/examples/server_node_efd/server/Makefile b/examples/server_node_efd/server/Makefile
> index 4837bd3ea..acbd12ae2 100644
> --- a/examples/server_node_efd/server/Makefile
> +++ b/examples/server_node_efd/server/Makefile
> @@ -25,5 +25,6 @@ INC := $(sort $(wildcard *.h))
>
> CFLAGS += $(WERROR_FLAGS) -O3
> CFLAGS += -I$(SRCDIR)/../shared
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/server_node_efd/server/init.c b/examples/server_node_efd/server/init.c
> index af5a18e28..b4ff9dd57 100644
> --- a/examples/server_node_efd/server/init.c
> +++ b/examples/server_node_efd/server/init.c
> @@ -149,6 +149,7 @@ init_port(uint16_t port_num)
>
> rte_eth_promiscuous_enable(port_num);
>
> + rte_eth_dev_set_supported_ptypes(port_num, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port_num);
> if (retval < 0)
> return retval;
> diff --git a/examples/skeleton/Makefile b/examples/skeleton/Makefile
> index c5ac26029..0037d6b25 100644
> --- a/examples/skeleton/Makefile
> +++ b/examples/skeleton/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/skeleton/basicfwd.c b/examples/skeleton/basicfwd.c
> index a8a8e98f0..6c10a06ef 100644
> --- a/examples/skeleton/basicfwd.c
> +++ b/examples/skeleton/basicfwd.c
> @@ -76,6 +76,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/skeleton/meson.build b/examples/skeleton/meson.build
> index 9bb9ec329..ef46b187e 100644
> --- a/examples/skeleton/meson.build
> +++ b/examples/skeleton/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'basicfwd.c'
> )
> diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
> index 31165bd92..586838676 100644
> --- a/examples/tep_termination/Makefile
> +++ b/examples/tep_termination/Makefile
> @@ -61,6 +61,7 @@ endif
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> CFLAGS += -Wno-deprecated-declarations
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/tep_termination/meson.build b/examples/tep_termination/meson.build
> index f65d68980..f40b1c0b8 100644
> --- a/examples/tep_termination/meson.build
> +++ b/examples/tep_termination/meson.build
> @@ -11,6 +11,7 @@ if not is_linux
> endif
> deps += ['hash', 'vhost']
> cflags += '-Wno-deprecated-declarations'
> +allow_experimental_apis = true
> sources = files(
> 'main.c', 'vxlan.c', 'vxlan_setup.c'
> )
> diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
> index 9a0880002..538a54b3a 100644
> --- a/examples/tep_termination/vxlan_setup.c
> +++ b/examples/tep_termination/vxlan_setup.c
> @@ -167,6 +167,7 @@ vxlan_port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the device. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
> index f84b7f017..7722e81c7 100644
> --- a/examples/vhost/Makefile
> +++ b/examples/vhost/Makefile
> @@ -62,6 +62,7 @@ else
> CFLAGS += -DALLOW_EXPERIMENTAL_API
> CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/vhost/main.c b/examples/vhost/main.c
> index 0961db080..57438b22c 100644
> --- a/examples/vhost/main.c
> +++ b/examples/vhost/main.c
> @@ -321,6 +321,7 @@ port_init(uint16_t port)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the device. */
> retval = rte_eth_dev_start(port);
> if (retval < 0) {
> diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
> index 2fdb991d7..65c2ad179 100644
> --- a/examples/vm_power_manager/Makefile
> +++ b/examples/vm_power_manager/Makefile
> @@ -28,6 +28,7 @@ endif
>
> CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> LDLIBS += -lvirt
>
> diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
> index 54c704610..190a7a9ea 100644
> --- a/examples/vm_power_manager/main.c
> +++ b/examples/vm_power_manager/main.c
> @@ -99,6 +99,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build
> index 20a4a05b3..54e2b584f 100644
> --- a/examples/vm_power_manager/meson.build
> +++ b/examples/vm_power_manager/meson.build
> @@ -25,6 +25,7 @@ if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
> deps += ['pmd_ixgbe']
> endif
>
> +allow_experimental_apis = true
> sources = files(
> 'channel_manager.c', 'channel_monitor.c', 'main.c', 'parse.c', 'power_manager.c', 'vm_power_cli.c'
> )
> diff --git a/examples/vmdq/Makefile b/examples/vmdq/Makefile
> index 1557ee86b..2168747cc 100644
> --- a/examples/vmdq/Makefile
> +++ b/examples/vmdq/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> EXTRA_CFLAGS += -O3
>
> diff --git a/examples/vmdq/main.c b/examples/vmdq/main.c
> index 7281ffd7f..87cf230f4 100644
> --- a/examples/vmdq/main.c
> +++ b/examples/vmdq/main.c
> @@ -258,6 +258,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0) {
> printf("port %d start failed\n", port);
> diff --git a/examples/vmdq/meson.build b/examples/vmdq/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/vmdq/meson.build
> +++ b/examples/vmdq/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/vmdq_dcb/Makefile b/examples/vmdq_dcb/Makefile
> index 391096cfb..ea1574d91 100644
> --- a/examples/vmdq_dcb/Makefile
> +++ b/examples/vmdq_dcb/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
> index 389000327..bace88e47 100644
> --- a/examples/vmdq_dcb/main.c
> +++ b/examples/vmdq_dcb/main.c
> @@ -313,6 +313,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0) {
> printf("port %d start failed\n", port);
> diff --git a/examples/vmdq_dcb/meson.build b/examples/vmdq_dcb/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/vmdq_dcb/meson.build
> +++ b/examples/vmdq_dcb/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
next prev parent reply other threads:[~2019-09-30 17:47 UTC|newest]
Thread overview: 245+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 20:47 [dpdk-dev] [PATCH v2 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 1/7] ethdev: add set ptype function pbhagavatula
2019-08-23 9:44 ` Andrew Rybchenko
2019-10-01 14:54 ` Jerin Jacob
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-08-23 1:19 ` Stephen Hemminger
2019-08-27 13:44 ` Andrew Rybchenko
2019-08-23 9:49 ` Andrew Rybchenko
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 3/7] ethdev: add flow action type " pbhagavatula
2019-08-23 10:00 ` Andrew Rybchenko
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 14:43 ` Jerin Jacob
2019-10-01 15:40 ` Ajit Khaparde
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-08-23 10:03 ` Andrew Rybchenko
2019-10-01 14:48 ` Jerin Jacob
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-08-23 10:10 ` Andrew Rybchenko
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 1/7] ethdev: add set ptype function pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 3/7] ethdev: add flow action type " pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-09-30 17:47 ` Aaron Conole [this message]
2019-10-01 5:02 ` Pavan Nikhilesh Bhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 7:04 ` Andrew Rybchenko
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 7:10 ` Andrew Rybchenko
2019-10-01 11:50 ` Hemant Agrawal
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 7:11 ` Andrew Rybchenko
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v5 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 1/7] ethdev: add set ptype function pbhagavatula
2019-10-02 13:37 ` Andrew Rybchenko
2019-10-02 13:41 ` Andrew Rybchenko
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 3/7] ethdev: add flow action type " pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-02 9:52 ` Jerin Jacob
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 1/7] ethdev: add set ptype function pbhagavatula
2019-10-03 7:40 ` Andrew Rybchenko
2019-10-03 17:15 ` Pavan Nikhilesh Bhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 3/7] ethdev: add flow action type " pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 1/7] ethdev: add set ptype function pbhagavatula
2019-10-08 14:48 ` Andrew Rybchenko
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 3/7] ethdev: add flow action type " pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 1/7] ethdev: add set ptype function pbhagavatula
2019-10-10 8:46 ` Andrew Rybchenko
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 3/7] ethdev: add flow action type " pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 1/7] ethdev: add set ptype function pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 3/7] ethdev: add flow action type " pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 1/7] ethdev: add set ptype function pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 3/7] ethdev: add flow action type " pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-17 17:43 ` [dpdk-dev] [PATCH v12 0/7] ethdev: add new Rx offload flags Ferruh Yigit
2019-10-18 7:32 ` Andrew Rybchenko
2019-10-18 9:42 ` Ferruh Yigit
2019-10-18 10:31 ` Andrew Rybchenko
2019-10-21 15:06 ` Ferruh Yigit
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 0/6] " pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 1/6] ethdev: add set ptype function pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 2/6] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 3/6] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-25 14:56 ` Andrew Rybchenko
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 4/6] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 5/6] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 6/6] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 0/6] ethdev: add new Rx offload flags pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 1/7] ethdev: add set ptype function pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-29 7:13 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 3/7] ethdev: log offloads that can't be disabled by PMD pbhagavatula
2019-10-29 7:05 ` Andrew Rybchenko
2019-10-29 8:33 ` Pavan Nikhilesh Bhagavatula
2019-10-29 8:42 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-29 7:21 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 5/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 6/7] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 7/7] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 1/7] ethdev: add set ptype function pbhagavatula
2019-10-31 13:39 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-31 13:43 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 3/7] ethdev: add validation to offloads set by PMD pbhagavatula
2019-10-29 16:53 ` Andrew Rybchenko
2019-10-29 17:25 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-10-31 13:45 ` [dpdk-dev] " Thomas Monjalon
2019-10-31 13:58 ` Thomas Monjalon
2019-10-31 16:44 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-11-01 22:50 ` Thomas Monjalon
2019-10-31 15:13 ` [dpdk-dev] " Matan Azrad
2019-10-31 15:18 ` Pavan Nikhilesh Bhagavatula
2019-10-31 15:50 ` Matan Azrad
2019-10-31 16:33 ` Pavan Nikhilesh Bhagavatula
2019-11-01 11:04 ` Andrew Rybchenko
2019-11-03 6:57 ` Matan Azrad
2019-11-03 12:12 ` Andrew Rybchenko
2019-11-03 15:16 ` Matan Azrad
2019-11-05 12:48 ` Andrew Rybchenko
2019-11-05 14:05 ` Matan Azrad
2019-11-05 14:37 ` Andrew Rybchenko
2019-11-06 6:58 ` Matan Azrad
2019-11-06 8:12 ` Andrew Rybchenko
2019-11-07 6:56 ` Matan Azrad
2019-11-08 10:12 ` Andrew Rybchenko
2019-11-08 10:29 ` Matan Azrad
2019-11-08 11:24 ` Andrew Rybchenko
2019-11-08 11:48 ` Matan Azrad
2019-11-08 12:09 ` Andrew Rybchenko
2019-11-08 12:59 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-31 14:03 ` Thomas Monjalon
2019-10-31 16:51 ` Pavan Nikhilesh Bhagavatula
2019-11-01 11:11 ` Andrew Rybchenko
2019-11-01 22:22 ` Thomas Monjalon
2019-11-01 17:49 ` Liron Himi
2019-11-03 12:06 ` Andrew Rybchenko
2019-11-03 14:06 ` [dpdk-dev] [EXT] " Liron Himi
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 5/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-31 14:05 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 6/7] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 7/7] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-31 10:33 ` Iremonger, Bernard
2019-11-06 18:13 ` Pavan Nikhilesh Bhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 0/8] ethdev: add new Rx offload flags pbhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 1/8] ethdev: add set ptype function pbhagavatula
2019-11-07 18:28 ` Ferruh Yigit
2019-11-08 9:05 ` Andrew Rybchenko
2019-11-08 9:52 ` Ferruh Yigit
2019-11-08 10:24 ` Andrew Rybchenko
2019-11-08 11:05 ` Ferruh Yigit
2019-11-08 11:40 ` Andrew Rybchenko
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 2/8] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-11-07 17:24 ` Ferruh Yigit
2019-11-10 14:43 ` Pavan Nikhilesh Bhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 3/8] ethdev: add validation to offloads set by PMD pbhagavatula
2019-11-07 16:51 ` Ferruh Yigit
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 4/8] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-11-07 16:48 ` Ferruh Yigit
2019-11-07 17:22 ` Ferruh Yigit
2019-11-08 8:48 ` Andrew Rybchenko
2019-11-14 14:01 ` Ferruh Yigit
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 5/8] examples/eventdev_pipeline: split port init sequence pbhagavatula
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 6/8] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 7/8] examples/l2fwd: disable ptype parsing pbhagavatula
2019-11-07 17:59 ` Ferruh Yigit
2019-11-07 18:30 ` Ferruh Yigit
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 8/8] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-11-07 11:57 ` Iremonger, Bernard
2019-11-07 12:27 ` Iremonger, Bernard
2019-11-07 14:36 ` Pavan Nikhilesh Bhagavatula
2019-11-07 15:00 ` Iremonger, Bernard
2019-11-07 18:40 ` Ferruh Yigit
2019-11-07 18:55 ` Jerin Jacob
2019-11-07 19:40 ` Ferruh Yigit
2019-11-08 4:13 ` Jerin Jacob
2019-11-08 13:54 ` Ananyev, Konstantin
2019-11-08 15:01 ` Jerin Jacob
2019-11-11 4:56 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-11-11 5:02 ` Jerin Jacob
2019-11-11 10:44 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 00/10] ethdev: add new Rx offload flags pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 01/10] ethdev: add set ptype function pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 02/10] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-11-13 18:04 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 03/10] ethdev: add validation to offloads set by PMD pbhagavatula
2019-11-13 18:10 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 04/10] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-11-11 15:05 ` Ferruh Yigit
2019-11-11 15:10 ` Pavan Nikhilesh Bhagavatula
2019-11-13 18:02 ` Ferruh Yigit
2019-11-14 12:52 ` Ferruh Yigit
2019-11-14 12:57 ` Jerin Jacob
2019-11-14 13:24 ` Andrew Rybchenko
2019-11-14 13:59 ` Ferruh Yigit
2019-11-14 14:14 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 05/10] examples/eventdev_pipeline: split port init sequence pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 06/10] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 07/10] examples/l2fwd: disable ptype parsing pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 08/10] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-11-11 14:51 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 09/10] app/testpmd: disable packet type parsing by default pbhagavatula
2019-11-11 14:54 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 10/10] app/testpmd: add RSS hash offload to port Rx offload cmd pbhagavatula
2019-11-11 15:45 ` [dpdk-dev] [PATCH v17 00/10] ethdev: add new Rx offload flags Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7tk19p7k2m.fsf@dhcp-25.97.bos.redhat.com \
--to=aconole@redhat.com \
--cc=akhil.goyal@nxp.com \
--cc=arybchenko@solarflare.com \
--cc=bernard.iremonger@intel.com \
--cc=bruce.richardson@intel.com \
--cc=byron.marohn@intel.com \
--cc=chas3@att.com \
--cc=cristian.dumitrescu@intel.com \
--cc=david.hunt@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=jasvinder.singh@intel.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=nicolas.chautru@intel.com \
--cc=orika@mellanox.com \
--cc=pbhagavatula@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=reshma.pattan@intel.com \
--cc=tiwei.bie@intel.com \
--cc=tomasz.kantecki@intel.com \
--cc=xiaoyun.li@intel.com \
--cc=yipeng1.wang@intel.com \
--cc=zhihong.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).