From: fengchengwen <fengchengwen@huawei.com>
To: <thomas@monjalon.net>, <dev@dpdk.org>
Subject: Re: [PATCH] dma/hisilicon: remove support for HIP09 platform
Date: Thu, 18 Jul 2024 09:12:31 +0800 [thread overview]
Message-ID: <fdfe79db-aa16-5b2b-ba8e-df0c334662fc@huawei.com> (raw)
In-Reply-To: <20240704025317.11812-1-fengchengwen@huawei.com>
Kindly ping.
Best regards
Chengwen Feng
On 2024/7/4 10:53, Chengwen Feng wrote:
> The DMA for HIP09 is no longer available, so delete it.
>
> Cc: stable@dpdk.org
>
> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
> ---
> doc/guides/dmadevs/hisilicon.rst | 1 -
> doc/guides/rel_notes/release_24_07.rst | 5 ++++
> drivers/dma/hisilicon/hisi_dmadev.c | 40 +-------------------------
> drivers/dma/hisilicon/hisi_dmadev.h | 35 +---------------------
> 4 files changed, 7 insertions(+), 74 deletions(-)
>
> ---
> v2: rebase and fix release notes confict.
>
> diff --git a/doc/guides/dmadevs/hisilicon.rst b/doc/guides/dmadevs/hisilicon.rst
> index 8c1f0f8886..974bc49376 100644
> --- a/doc/guides/dmadevs/hisilicon.rst
> +++ b/doc/guides/dmadevs/hisilicon.rst
> @@ -13,7 +13,6 @@ Supported Kunpeng SoCs
> ----------------------
>
> * Kunpeng 920
> -* Kunpeng 930
>
>
> Device Setup
> diff --git a/doc/guides/rel_notes/release_24_07.rst b/doc/guides/rel_notes/release_24_07.rst
> index 56c03ed6c9..ed72caa886 100644
> --- a/doc/guides/rel_notes/release_24_07.rst
> +++ b/doc/guides/rel_notes/release_24_07.rst
> @@ -164,6 +164,11 @@ Removed Items
> BPF is not supported and the librte-bpf test fails on 32-bit x86 kernels.
> So disable the library and the pmd.
>
> +* **dma/hisilicon: remove support for HIP09 platform.**
> +
> + The DMA for HIP09 is no longer available, so remove the support for HIP09
> + platform.
> +
>
> API Changes
> -----------
> diff --git a/drivers/dma/hisilicon/hisi_dmadev.c b/drivers/dma/hisilicon/hisi_dmadev.c
> index 22303e7bef..067c9513f6 100644
> --- a/drivers/dma/hisilicon/hisi_dmadev.c
> +++ b/drivers/dma/hisilicon/hisi_dmadev.c
> @@ -39,8 +39,6 @@ hisi_dma_queue_base(struct hisi_dma_dev *hw)
> {
> if (hw->reg_layout == HISI_DMA_REG_LAYOUT_HIP08)
> return HISI_DMA_HIP08_QUEUE_BASE;
> - else if (hw->reg_layout == HISI_DMA_REG_LAYOUT_HIP09)
> - return HISI_DMA_HIP09_QUEUE_BASE;
> else
> return 0;
> }
> @@ -216,25 +214,6 @@ hisi_dma_init_hw(struct hisi_dma_dev *hw)
> HISI_DMA_HIP08_QUEUE_INT_MASK_M, true);
> hisi_dma_update_queue_mbit(hw, HISI_DMA_QUEUE_INT_MASK_REG,
> HISI_DMA_HIP08_QUEUE_INT_MASK_M, true);
> - } else if (hw->reg_layout == HISI_DMA_REG_LAYOUT_HIP09) {
> - hisi_dma_update_queue_mbit(hw, HISI_DMA_QUEUE_CTRL0_REG,
> - HISI_DMA_HIP09_QUEUE_CTRL0_ERR_ABORT_M, false);
> - hisi_dma_update_queue_mbit(hw, HISI_DMA_QUEUE_INT_STATUS_REG,
> - HISI_DMA_HIP09_QUEUE_INT_MASK_M, true);
> - hisi_dma_update_queue_mbit(hw, HISI_DMA_QUEUE_INT_MASK_REG,
> - HISI_DMA_HIP09_QUEUE_INT_MASK_M, true);
> - hisi_dma_update_queue_mbit(hw,
> - HISI_DMA_HIP09_QUEUE_ERR_INT_STATUS_REG,
> - HISI_DMA_HIP09_QUEUE_ERR_INT_MASK_M, true);
> - hisi_dma_update_queue_mbit(hw,
> - HISI_DMA_HIP09_QUEUE_ERR_INT_MASK_REG,
> - HISI_DMA_HIP09_QUEUE_ERR_INT_MASK_M, true);
> - hisi_dma_update_queue_bit(hw, HISI_DMA_QUEUE_CTRL1_REG,
> - HISI_DMA_HIP09_QUEUE_CTRL1_VA_ENABLE_B, true);
> - hisi_dma_update_bit(hw,
> - HISI_DMA_HIP09_QUEUE_CFG_REG(hw->queue_id),
> - HISI_DMA_HIP09_QUEUE_CFG_LINK_DOWN_MASK_B,
> - true);
> }
> }
>
> @@ -256,8 +235,6 @@ hisi_dma_reg_layout(uint8_t revision)
> {
> if (revision == HISI_DMA_REVISION_HIP08B)
> return HISI_DMA_REG_LAYOUT_HIP08;
> - else if (revision >= HISI_DMA_REVISION_HIP09A)
> - return HISI_DMA_REG_LAYOUT_HIP09;
> else
> return HISI_DMA_REG_LAYOUT_INVALID;
> }
> @@ -328,14 +305,11 @@ hisi_dma_info_get(const struct rte_dma_dev *dev,
> struct rte_dma_info *dev_info,
> uint32_t info_sz)
> {
> - struct hisi_dma_dev *hw = dev->data->dev_private;
> + RTE_SET_USED(dev);
> RTE_SET_USED(info_sz);
>
> dev_info->dev_capa = RTE_DMA_CAPA_MEM_TO_MEM |
> RTE_DMA_CAPA_OPS_COPY;
> - if (hw->reg_layout == HISI_DMA_REG_LAYOUT_HIP09)
> - dev_info->dev_capa |= RTE_DMA_CAPA_HANDLES_ERRORS;
> -
> dev_info->max_vchans = 1;
> dev_info->max_desc = HISI_DMA_MAX_DESC_NUM;
> dev_info->min_desc = HISI_DMA_MIN_DESC_NUM;
> @@ -514,18 +488,6 @@ hisi_dma_dump_common(struct hisi_dma_dev *hw, FILE *f)
> { HISI_DMA_REG_LAYOUT_HIP08,
> HISI_DMA_HIP08_DUMP_START_REG,
> HISI_DMA_HIP08_DUMP_END_REG },
> - { HISI_DMA_REG_LAYOUT_HIP09,
> - HISI_DMA_HIP09_DUMP_REGION_A_START_REG,
> - HISI_DMA_HIP09_DUMP_REGION_A_END_REG },
> - { HISI_DMA_REG_LAYOUT_HIP09,
> - HISI_DMA_HIP09_DUMP_REGION_B_START_REG,
> - HISI_DMA_HIP09_DUMP_REGION_B_END_REG },
> - { HISI_DMA_REG_LAYOUT_HIP09,
> - HISI_DMA_HIP09_DUMP_REGION_C_START_REG,
> - HISI_DMA_HIP09_DUMP_REGION_C_END_REG },
> - { HISI_DMA_REG_LAYOUT_HIP09,
> - HISI_DMA_HIP09_DUMP_REGION_D_START_REG,
> - HISI_DMA_HIP09_DUMP_REGION_D_END_REG },
> };
> uint32_t i;
>
> diff --git a/drivers/dma/hisilicon/hisi_dmadev.h b/drivers/dma/hisilicon/hisi_dmadev.h
> index 5a17f9f69e..a57b5c759a 100644
> --- a/drivers/dma/hisilicon/hisi_dmadev.h
> +++ b/drivers/dma/hisilicon/hisi_dmadev.h
> @@ -25,22 +25,14 @@
> #define HISI_DMA_DEVICE_ID 0xA122
> #define HISI_DMA_PCI_REVISION_ID_REG 0x08
> #define HISI_DMA_REVISION_HIP08B 0x21
> -#define HISI_DMA_REVISION_HIP09A 0x30
>
> #define HISI_DMA_MAX_HW_QUEUES 4
> #define HISI_DMA_MAX_DESC_NUM 8192
> #define HISI_DMA_MIN_DESC_NUM 32
>
> -/**
> - * The HIP08B(HiSilicon IP08) and HIP09B(HiSilicon IP09) are DMA iEPs, they
> - * have the same pci device id but different pci revision.
> - * Unfortunately, they have different register layouts, so two layout
> - * enumerations are defined.
> - */
> enum {
> HISI_DMA_REG_LAYOUT_INVALID = 0,
> - HISI_DMA_REG_LAYOUT_HIP08,
> - HISI_DMA_REG_LAYOUT_HIP09
> + HISI_DMA_REG_LAYOUT_HIP08
> };
>
> /**
> @@ -69,9 +61,6 @@ enum {
> * length of queue-region. The global offset for a single queue register is
> * calculated by:
> * offset = queue-base + (queue-id * queue-region) + reg-offset-in-region.
> - *
> - * The first part of queue region is basically the same for HIP08 and HIP09
> - * register layouts, therefore, HISI_QUEUE_* registers are defined for it.
> */
> #define HISI_DMA_QUEUE_SQ_BASE_L_REG 0x0
> #define HISI_DMA_QUEUE_SQ_BASE_H_REG 0x4
> @@ -110,28 +99,6 @@ enum {
> #define HISI_DMA_HIP08_DUMP_START_REG 0x2000
> #define HISI_DMA_HIP08_DUMP_END_REG 0x2280
>
> -/**
> - * HiSilicon IP09 DMA register and field define:
> - */
> -#define HISI_DMA_HIP09_QUEUE_BASE 0x2000
> -#define HISI_DMA_HIP09_QUEUE_CTRL0_ERR_ABORT_M GENMASK(31, 28)
> -#define HISI_DMA_HIP09_QUEUE_CTRL1_VA_ENABLE_B 2
> -#define HISI_DMA_HIP09_QUEUE_INT_MASK_M 0x1
> -#define HISI_DMA_HIP09_QUEUE_ERR_INT_STATUS_REG 0x48
> -#define HISI_DMA_HIP09_QUEUE_ERR_INT_MASK_REG 0x4C
> -#define HISI_DMA_HIP09_QUEUE_ERR_INT_MASK_M GENMASK(18, 1)
> -#define HISI_DMA_HIP09_QUEUE_CFG_REG(queue_id) (0x800 + \
> - (queue_id) * 0x20)
> -#define HISI_DMA_HIP09_QUEUE_CFG_LINK_DOWN_MASK_B 16
> -#define HISI_DMA_HIP09_DUMP_REGION_A_START_REG 0x0
> -#define HISI_DMA_HIP09_DUMP_REGION_A_END_REG 0x368
> -#define HISI_DMA_HIP09_DUMP_REGION_B_START_REG 0x800
> -#define HISI_DMA_HIP09_DUMP_REGION_B_END_REG 0xA08
> -#define HISI_DMA_HIP09_DUMP_REGION_C_START_REG 0x1800
> -#define HISI_DMA_HIP09_DUMP_REGION_C_END_REG 0x1A4C
> -#define HISI_DMA_HIP09_DUMP_REGION_D_START_REG 0x1C00
> -#define HISI_DMA_HIP09_DUMP_REGION_D_END_REG 0x1CC4
> -
> /**
> * In fact, there are multiple states, but it need to pay attention to
> * the following three states for the driver:
>
next prev parent reply other threads:[~2024-07-18 1:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-08 8:29 Chengwen Feng
2024-07-04 2:53 ` Chengwen Feng
2024-07-18 1:12 ` fengchengwen [this message]
2024-07-23 9:18 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fdfe79db-aa16-5b2b-ba8e-df0c334662fc@huawei.com \
--to=fengchengwen@huawei.com \
--cc=dev@dpdk.org \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).