* [dts] DDP / testpmd setup
@ 2018-08-26 12:18 Sebastian Foss
[not found] ` <CAHLOa7SaSPqRhg5Xhy88efNVsJeba-fKRT7HVmO2sMZ7ccugDg@mail.gmail.com>
0 siblings, 1 reply; 7+ messages in thread
From: Sebastian Foss @ 2018-08-26 12:18 UTC (permalink / raw)
To: dts
[-- Attachment #1: Type: text/plain, Size: 622 bytes --]
Hi,
we are using testpmd to store ddp profiles in an Intel X710DA2 NIC. Is there
a way to have those profiles stored in the NIC permanently or what would
be the best solution to have those profiles loaded automatically at boot and
use a regular kernel driver afterwards ? From what i understand so far to
use the DPDK functions to load a DDP Profile the UIO or VFIO drivers have to
be used.
Thank you!
Mit freundlichen Grüßen / Best Regards
Sebastian Foss, Electrical Engineering (B. Eng.)
Hardware & Software Development
Geschäftsführer / CEO
SF Engineering UG & Co. KG
[-- Attachment #2: Type: text/html, Size: 3204 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] DDP / testpmd setup
[not found] ` <CAHLOa7SaSPqRhg5Xhy88efNVsJeba-fKRT7HVmO2sMZ7ccugDg@mail.gmail.com>
@ 2018-08-26 19:57 ` Sebastian Foss
2018-08-26 20:45 ` Rami Rosen
0 siblings, 1 reply; 7+ messages in thread
From: Sebastian Foss @ 2018-08-26 19:57 UTC (permalink / raw)
To: dts
[-- Attachment #1: Type: text/plain, Size: 1583 bytes --]
Hi Rami,
I found the switch for testpmd to use a cmd line script instead of using interactive mode. Still need to see if loading a ddp persists on the card when rebinding the i40e driver instead of vfio / uio.
The kernel i40e driver also seems to have the functions to use AdminQ to load DDPs onto the card – however im not sure how to do it from userland.
Von: Rami Rosen <ramirose@gmail.com>
Gesendet: Sonntag, 26. August 2018 20:59
An: sfo@ingenieurbuero-foss.de
Betreff: Re: [dts] DDP / testpmd setup
Hi Sebastian,
I don't know of such a way, unfortunately. Also you cannot automate testpmd
as it is to load the profile automatically without going interactive mode.
Regards,
Rami Rosen
http://ramirose.wix.com/ramirosen
On Sun, Aug 26, 2018 at 3:18 PM Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> > wrote:
Hi,
we are using testpmd to store ddp profiles in an Intel X710DA2 NIC. Is there a way to have those profiles stored in the NIC permanently – or what would be the best solution to have those profiles loaded automatically at boot and use a regular kernel driver afterwards ? From what i understand so far to use the DPDK functions to load a DDP Profile the UIO or VFIO drivers have to be used.
Thank you!
Mit freundlichen Grüßen / Best Regards
Sebastian Foss, Electrical Engineering (B. Eng.)
Hardware & Software Development
Geschäftsführer / CEO
SF Engineering UG & Co. KG
--
regards,
Rami Rosen
[-- Attachment #2: Type: text/html, Size: 6508 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] DDP / testpmd setup
2018-08-26 19:57 ` Sebastian Foss
@ 2018-08-26 20:45 ` Rami Rosen
2018-08-28 14:33 ` Sebastian Foss
0 siblings, 1 reply; 7+ messages in thread
From: Rami Rosen @ 2018-08-26 20:45 UTC (permalink / raw)
To: Sebastian Foss; +Cc: dts
[-- Attachment #1: Type: text/plain, Size: 2383 bytes --]
Hi, Sebastian,
Regarding rebinding, there are two types:
One is with
dpdk-devbind -b i40e pci_id_of_port
And the second is the ribust one:
rmmod i40e and then modprobe i40e. I am not sure as to which of the two you
aim when talking about rebinding.
I would suggest to start with the first option. It triggers calling the
probe() callback of I40E, and not the full longer and heavier way with I40E
module_exit() and module_init() callbacks
Regarding userspace app for achieving it: you can follow the dpdk testpmd
code, but
this can take quite a time and effort.
Regards,
Rami Rosen
בתאריך יום א׳, 26 באוג׳ 2018, 22:57, מאת Sebastian Foss <
sfo@ingenieurbuero-foss.de>:
> Hi Rami,
>
> I found the switch for testpmd to use a cmd line script instead of using
> interactive mode. Still need to see if loading a ddp persists on the card
> when rebinding the i40e driver instead of vfio / uio.
>
> The kernel i40e driver also seems to have the functions to use AdminQ to
> load DDPs onto the card – however im not sure how to do it from userland.
>
>
>
>
>
> *Von:* Rami Rosen <ramirose@gmail.com>
> *Gesendet:* Sonntag, 26. August 2018 20:59
> *An:* sfo@ingenieurbuero-foss.de
> *Betreff:* Re: [dts] DDP / testpmd setup
>
>
>
> Hi Sebastian,
>
> I don't know of such a way, unfortunately. Also you cannot automate testpmd
>
> as it is to load the profile automatically without going interactive mode.
>
>
>
> Regards,
>
> Rami Rosen
>
> http://ramirose.wix.com/ramirosen
>
>
>
>
>
>
>
>
>
> On Sun, Aug 26, 2018 at 3:18 PM Sebastian Foss <sfo@ingenieurbuero-foss.de>
> wrote:
>
> Hi,
>
> we are using testpmd to store ddp profiles in an Intel X710DA2 NIC. Is
> there a way to have those profiles stored in the NIC permanently – or what
> would be the best solution to have those profiles loaded automatically at
> boot and use a regular kernel driver afterwards ? From what i understand so
> far to use the DPDK functions to load a DDP Profile the UIO or VFIO drivers
> have to be used.
>
>
>
> Thank you!
>
>
>
> Mit freundlichen Grüßen / Best Regards
>
> Sebastian Foss, Electrical Engineering (B. Eng.)
>
> Hardware & Software Development
>
> Geschäftsführer / CEO
>
> SF Engineering UG & Co. KG
>
>
>
>
>
>
>
> --
>
> regards,
>
> Rami Rosen
>
[-- Attachment #2: Type: text/html, Size: 5573 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] DDP / testpmd setup
2018-08-26 20:45 ` Rami Rosen
@ 2018-08-28 14:33 ` Sebastian Foss
[not found] ` <CAHLOa7SOMru4yB=bQJSRf4hgq8yZfrmKWdTURaxQxHrGGDjT9A@mail.gmail.com>
0 siblings, 1 reply; 7+ messages in thread
From: Sebastian Foss @ 2018-08-28 14:33 UTC (permalink / raw)
To: 'Rami Rosen'; +Cc: dts
[-- Attachment #1: Type: text/plain, Size: 2985 bytes --]
Hi,
ok seems the ddp profiles are persistent when unbinding and rebinding the dpdk / linux drivers. However it seems like the ddp profile is not used for rss hashing when i bind the i40e driver and run some test (e.g. PPPoE traffic).
Are there any plans to support ddp profiles for rss hashing when i40e is used without dpdk ?
Thanks.
Von: Rami Rosen <ramirose@gmail.com>
Gesendet: Sonntag, 26. August 2018 22:46
An: Sebastian Foss <sfo@ingenieurbuero-foss.de>
Cc: dts@dpdk.org
Betreff: Re: [dts] DDP / testpmd setup
Hi, Sebastian,
Regarding rebinding, there are two types:
One is with
dpdk-devbind -b i40e pci_id_of_port
And the second is the ribust one:
rmmod i40e and then modprobe i40e. I am not sure as to which of the two you aim when talking about rebinding.
I would suggest to start with the first option. It triggers calling the probe() callback of I40E, and not the full longer and heavier way with I40E module_exit() and module_init() callbacks
Regarding userspace app for achieving it: you can follow the dpdk testpmd code, but
this can take quite a time and effort.
Regards,
Rami Rosen
בתאריך יום א׳, 26 באוג׳ 2018, 22:57, מאת Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> >:
Hi Rami,
I found the switch for testpmd to use a cmd line script instead of using interactive mode. Still need to see if loading a ddp persists on the card when rebinding the i40e driver instead of vfio / uio.
The kernel i40e driver also seems to have the functions to use AdminQ to load DDPs onto the card – however im not sure how to do it from userland.
Von: Rami Rosen <ramirose@gmail.com <mailto:ramirose@gmail.com> >
Gesendet: Sonntag, 26. August 2018 20:59
An: sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de>
Betreff: Re: [dts] DDP / testpmd setup
Hi Sebastian,
I don't know of such a way, unfortunately. Also you cannot automate testpmd
as it is to load the profile automatically without going interactive mode.
Regards,
Rami Rosen
http://ramirose.wix.com/ramirosen
On Sun, Aug 26, 2018 at 3:18 PM Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> > wrote:
Hi,
we are using testpmd to store ddp profiles in an Intel X710DA2 NIC. Is there a way to have those profiles stored in the NIC permanently – or what would be the best solution to have those profiles loaded automatically at boot and use a regular kernel driver afterwards ? From what i understand so far to use the DPDK functions to load a DDP Profile the UIO or VFIO drivers have to be used.
Thank you!
Mit freundlichen Grüßen / Best Regards
Sebastian Foss, Electrical Engineering (B. Eng.)
Hardware & Software Development
Geschäftsführer / CEO
SF Engineering UG & Co. KG
--
regards,
Rami Rosen
[-- Attachment #2: Type: text/html, Size: 11029 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] DDP / testpmd setup
[not found] ` <CAHLOa7SOMru4yB=bQJSRf4hgq8yZfrmKWdTURaxQxHrGGDjT9A@mail.gmail.com>
@ 2018-08-28 14:42 ` Sebastian Foss
2018-08-28 14:48 ` Rami Rosen
0 siblings, 1 reply; 7+ messages in thread
From: Sebastian Foss @ 2018-08-28 14:42 UTC (permalink / raw)
To: 'Rami Rosen'; +Cc: dts
[-- Attachment #1: Type: text/plain, Size: 7041 bytes --]
I used the latest pppoe ddp from intel’s website and tried to map/add pctypes 15 and 17 to the hashing – then run some pppoe when using i40e again and it still all goes to queue 0.
testpmd> ddp get info /home/dpdktest/ppp-oe-ol2tpv2.pkgo
Global Track id: 0x80000006
Global Version: 1.0.0.0
Global Package name: PPPoE and PPPoL2TPv2
i40e Profile Track id: 0x80000006
i40e Profile Version: 1.0.0.0
i40e Profile name: E710 PPPoE and PPPoL2TPv2
Package Notes:
This profile enables PPPoE and PPPoL2TPv2 parsing
L2TPv2 Tunnel ID extracted to field 46
L2TPv2/PPPoE Session ID extracted to field 47
PPP Protocol ID extracted to field 48
List of supported devices:
8086:1572 FFFF:FFFF
8086:1574 FFFF:FFFF
8086:1580 FFFF:FFFF
8086:1581 FFFF:FFFF
8086:1583 FFFF:FFFF
8086:1584 FFFF:FFFF
8086:1585 FFFF:FFFF
8086:1586 FFFF:FFFF
8086:1587 FFFF:FFFF
8086:1588 FFFF:FFFF
8086:1589 FFFF:FFFF
8086:158A FFFF:FFFF
8086:158B FFFF:FFFF
List of used protocols:
12: IPV4
13: IPV6
15: GRENAT
17: TCP
18: UDP
19: SCTP
20: ICMP
22: L2TPv2CTRL
23: ICMPV6
26: L2TPv2
27: L2TPv2PAY
28: PPPoL2TPv2
29: PPPoE
33: PAY2
34: PAY3
35: PAY4
44: IPV4FRAG
48: IPV6FRAG
52: OIPV4
53: OIPV6
List of defined packet classification types:
14: L2TPv2CTRL
15: PPPoE IPV4
16: PPPoE IPV6
17: PPPoE
18: PPPoL2TPv2 IPV4
19: PPPoL2TPv2 IPV6
20: PPPoL2TPv2
21: L2TPv2PAY
List of defined packet types:
154: PPPoE PAY2
155: PPPoE IPV4FRAG PAY3
156: PPPoE IPV4 PAY3
157: PPPoE IPV4 UDP PAY4
158: PPPoE IPV4 TCP PAY4
159: PPPoE IPV4 SCTP PAY4
160: PPPoE IPV4 ICMP PAY4
161: PPPoE IPV6FRAG PAY3
162: PPPoE IPV6 PAY3
163: PPPoE IPV6 UDP PAY4
164: PPPoE IPV6 TCP PAY4
165: PPPoE IPV6 SCTP PAY4
166: PPPoE IPV6 ICMPV6 PAY4
167: OIPV4 L2TPv2 PPPoL2TPv2 PAY3
168: OIPV4 L2TPv2 PPPoL2TPv2 IPV4FRAG PAY3
169: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 PAY3
170: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 UDP PAY4
171: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 TCP PAY4
172: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 SCTP PAY4
173: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 ICMP PAY4
174: OIPV4 L2TPv2 PPPoL2TPv2 IPV6FRAG PAY3
175: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 PAY3
176: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 UDP PAY4
177: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 TCP PAY4
178: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 SCTP PAY4
179: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 ICMPV6 PAY4
180: OIPV6 L2TPv2 PPPoL2TPv2 PAY3
181: OIPV6 L2TPv2 PPPoL2TPv2 IPV4FRAG PAY3
182: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 PAY3
183: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 UDP PAY4
184: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 TCP PAY4
185: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 SCTP PAY4
186: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 ICMP PAY4
187: OIPV6 L2TPv2 PPPoL2TPv2 IPV6FRAG PAY3
188: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 PAY3
189: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 UDP PAY4
190: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 TCP PAY4
191: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 SCTP PAY4
150: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 ICMPV6 PAY4
12: OIPV4 L2TPv2 L2TPv2CTRL PAY4
13: OIPV6 L2TPv2 L2TPv2CTRL PAY4
14: OIPV4 L2TPv2 L2TPv2PAY PAY3
15: OIPV6 L2TPv2 L2TPv2PAY PAY3
Von: Rami Rosen <ramirose@gmail.com>
Gesendet: Dienstag, 28. August 2018 16:38
An: Sebastian Foss <sfo@ingenieurbuero-foss.de>
Cc: dts@dpdk.org
Betreff: Re: [dts] DDP / testpmd setup
Hi Sebastian,
What do you get when running:
testpmd> ddp get info (profile_path)
See:
https://doc.dpdk.org/guides/testpmd_app_ug/testpmd_funcs.html
Regards,
Rami Rosen
On Tue, Aug 28, 2018 at 5:33 PM Sebastian Foss <sfo@ingenieurbuero-foss.de> wrote:
Hi,
ok seems the ddp profiles are persistent when unbinding and rebinding the dpdk / linux drivers. However it seems like the ddp profile is not used for rss hashing when i bind the i40e driver and run some test (e.g. PPPoE traffic).
Are there any plans to support ddp profiles for rss hashing when i40e is used without dpdk ?
Thanks.
Von: Rami Rosen <ramirose@gmail.com <mailto:ramirose@gmail.com> >
Gesendet: Sonntag, 26. August 2018 22:46
An: Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> >
Cc: dts@dpdk.org <mailto:dts@dpdk.org>
Betreff: Re: [dts] DDP / testpmd setup
Hi, Sebastian,
Regarding rebinding, there are two types:
One is with
dpdk-devbind -b i40e pci_id_of_port
And the second is the ribust one:
rmmod i40e and then modprobe i40e. I am not sure as to which of the two you aim when talking about rebinding.
I would suggest to start with the first option. It triggers calling the probe() callback of I40E, and not the full longer and heavier way with I40E module_exit() and module_init() callbacks
Regarding userspace app for achieving it: you can follow the dpdk testpmd code, but
this can take quite a time and effort.
Regards,
Rami Rosen
בתאריך יום א׳, 26 באוג׳ 2018, 22:57, מאת Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> >:
Hi Rami,
I found the switch for testpmd to use a cmd line script instead of using interactive mode. Still need to see if loading a ddp persists on the card when rebinding the i40e driver instead of vfio / uio.
The kernel i40e driver also seems to have the functions to use AdminQ to load DDPs onto the card – however im not sure how to do it from userland.
Von: Rami Rosen <ramirose@gmail.com <mailto:ramirose@gmail.com> >
Gesendet: Sonntag, 26. August 2018 20:59
An: sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de>
Betreff: Re: [dts] DDP / testpmd setup
Hi Sebastian,
I don't know of such a way, unfortunately. Also you cannot automate testpmd
as it is to load the profile automatically without going interactive mode.
Regards,
Rami Rosen
http://ramirose.wix.com/ramirosen
On Sun, Aug 26, 2018 at 3:18 PM Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> > wrote:
Hi,
we are using testpmd to store ddp profiles in an Intel X710DA2 NIC. Is there a way to have those profiles stored in the NIC permanently – or what would be the best solution to have those profiles loaded automatically at boot and use a regular kernel driver afterwards ? From what i understand so far to use the DPDK functions to load a DDP Profile the UIO or VFIO drivers have to be used.
Thank you!
Mit freundlichen Grüßen / Best Regards
Sebastian Foss, Electrical Engineering (B. Eng.)
Hardware & Software Development
Geschäftsführer / CEO
SF Engineering UG & Co. KG
--
regards,
Rami Rosen
--
regards,
Rami Rosen
[-- Attachment #2: Type: text/html, Size: 31423 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] DDP / testpmd setup
2018-08-28 14:42 ` Sebastian Foss
@ 2018-08-28 14:48 ` Rami Rosen
2018-08-28 14:52 ` Sebastian Foss
0 siblings, 1 reply; 7+ messages in thread
From: Rami Rosen @ 2018-08-28 14:48 UTC (permalink / raw)
To: Sebastian Foss; +Cc: dts
[-- Attachment #1: Type: text/plain, Size: 7888 bytes --]
Hi Sebastian,
How did you found out it goes all to queue 0 ? is it by running testpmd in
RXonly mode, and setting it to verbose
and looking in the content of the packets it shows on the console ? or by
any other means ?
Also can you describe your setup - is it with VMs, how do you send the
traffic (scapy/pktgen/IXIA)?
Regards,
Rami Rosen
On Tue, Aug 28, 2018 at 5:42 PM Sebastian Foss <sfo@ingenieurbuero-foss.de>
wrote:
> I used the latest pppoe ddp from intel’s website and tried to map/add
> pctypes 15 and 17 to the hashing – then run some pppoe when using i40e
> again and it still all goes to queue 0.
>
>
>
> testpmd> ddp get info /home/dpdktest/ppp-oe-ol2tpv2.pkgo
>
> Global Track id: 0x80000006
>
> Global Version: 1.0.0.0
>
> Global Package name: PPPoE and PPPoL2TPv2
>
>
>
> i40e Profile Track id: 0x80000006
>
> i40e Profile Version: 1.0.0.0
>
> i40e Profile name: E710 PPPoE and PPPoL2TPv2
>
>
>
> Package Notes:
>
> This profile enables PPPoE and PPPoL2TPv2 parsing
>
> L2TPv2 Tunnel ID extracted to field 46
>
> L2TPv2/PPPoE Session ID extracted to field 47
>
> PPP Protocol ID extracted to field 48
>
>
>
>
>
> List of supported devices:
>
> 8086:1572 FFFF:FFFF
>
> 8086:1574 FFFF:FFFF
>
> 8086:1580 FFFF:FFFF
>
> 8086:1581 FFFF:FFFF
>
> 8086:1583 FFFF:FFFF
>
> 8086:1584 FFFF:FFFF
>
> 8086:1585 FFFF:FFFF
>
> 8086:1586 FFFF:FFFF
>
> 8086:1587 FFFF:FFFF
>
> 8086:1588 FFFF:FFFF
>
> 8086:1589 FFFF:FFFF
>
> 8086:158A FFFF:FFFF
>
> 8086:158B FFFF:FFFF
>
>
>
> List of used protocols:
>
> 12: IPV4
>
> 13: IPV6
>
> 15: GRENAT
>
> 17: TCP
>
> 18: UDP
>
> 19: SCTP
>
> 20: ICMP
>
> 22: L2TPv2CTRL
>
> 23: ICMPV6
>
> 26: L2TPv2
>
> 27: L2TPv2PAY
>
> 28: PPPoL2TPv2
>
> 29: PPPoE
>
> 33: PAY2
>
> 34: PAY3
>
> 35: PAY4
>
> 44: IPV4FRAG
>
> 48: IPV6FRAG
>
> 52: OIPV4
>
> 53: OIPV6
>
>
>
> List of defined packet classification types:
>
> 14: L2TPv2CTRL
>
> 15: PPPoE IPV4
>
> 16: PPPoE IPV6
>
> 17: PPPoE
>
> 18: PPPoL2TPv2 IPV4
>
> 19: PPPoL2TPv2 IPV6
>
> 20: PPPoL2TPv2
>
> 21: L2TPv2PAY
>
>
>
> List of defined packet types:
>
> 154: PPPoE PAY2
>
> 155: PPPoE IPV4FRAG PAY3
>
> 156: PPPoE IPV4 PAY3
>
> 157: PPPoE IPV4 UDP PAY4
>
> 158: PPPoE IPV4 TCP PAY4
>
> 159: PPPoE IPV4 SCTP PAY4
>
> 160: PPPoE IPV4 ICMP PAY4
>
> 161: PPPoE IPV6FRAG PAY3
>
> 162: PPPoE IPV6 PAY3
>
> 163: PPPoE IPV6 UDP PAY4
>
> 164: PPPoE IPV6 TCP PAY4
>
> 165: PPPoE IPV6 SCTP PAY4
>
> 166: PPPoE IPV6 ICMPV6 PAY4
>
> 167: OIPV4 L2TPv2 PPPoL2TPv2 PAY3
>
> 168: OIPV4 L2TPv2 PPPoL2TPv2 IPV4FRAG PAY3
>
> 169: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 PAY3
>
> 170: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 UDP PAY4
>
> 171: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 TCP PAY4
>
> 172: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 SCTP PAY4
>
> 173: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 ICMP PAY4
>
> 174: OIPV4 L2TPv2 PPPoL2TPv2 IPV6FRAG PAY3
>
> 175: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 PAY3
>
> 176: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 UDP PAY4
>
> 177: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 TCP PAY4
>
> 178: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 SCTP PAY4
>
> 179: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 ICMPV6 PAY4
>
> 180: OIPV6 L2TPv2 PPPoL2TPv2 PAY3
>
> 181: OIPV6 L2TPv2 PPPoL2TPv2 IPV4FRAG PAY3
>
> 182: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 PAY3
>
> 183: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 UDP PAY4
>
> 184: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 TCP PAY4
>
> 185: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 SCTP PAY4
>
> 186: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 ICMP PAY4
>
> 187: OIPV6 L2TPv2 PPPoL2TPv2 IPV6FRAG PAY3
>
> 188: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 PAY3
>
> 189: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 UDP PAY4
>
> 190: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 TCP PAY4
>
> 191: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 SCTP PAY4
>
> 150: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 ICMPV6 PAY4
>
> 12: OIPV4 L2TPv2 L2TPv2CTRL PAY4
>
> 13: OIPV6 L2TPv2 L2TPv2CTRL PAY4
>
> 14: OIPV4 L2TPv2 L2TPv2PAY PAY3
>
> 15: OIPV6 L2TPv2 L2TPv2PAY PAY3
>
>
>
> *Von:* Rami Rosen <ramirose@gmail.com>
> *Gesendet:* Dienstag, 28. August 2018 16:38
> *An:* Sebastian Foss <sfo@ingenieurbuero-foss.de>
> *Cc:* dts@dpdk.org
> *Betreff:* Re: [dts] DDP / testpmd setup
>
>
>
> Hi Sebastian,
>
>
>
> What do you get when running:
>
>
>
> testpmd> ddp get info (profile_path)
>
>
>
> See:
> https://doc.dpdk.org/guides/testpmd_app_ug/testpmd_funcs.html
>
>
>
> Regards,
>
> Rami Rosen
>
>
>
>
>
> On Tue, Aug 28, 2018 at 5:33 PM Sebastian Foss <sfo@ingenieurbuero-foss.de>
> wrote:
>
> Hi,
>
> ok seems the ddp profiles are persistent when unbinding and rebinding the
> dpdk / linux drivers. However it seems like the ddp profile is not used for
> rss hashing when i bind the i40e driver and run some test (e.g. PPPoE
> traffic).
>
> Are there any plans to support ddp profiles for rss hashing when i40e is
> used without dpdk ?
>
>
>
> Thanks.
>
>
>
> *Von:* Rami Rosen <ramirose@gmail.com>
> *Gesendet:* Sonntag, 26. August 2018 22:46
> *An:* Sebastian Foss <sfo@ingenieurbuero-foss.de>
> *Cc:* dts@dpdk.org
> *Betreff:* Re: [dts] DDP / testpmd setup
>
>
>
> Hi, Sebastian,
>
> Regarding rebinding, there are two types:
>
> One is with
>
> dpdk-devbind -b i40e pci_id_of_port
>
> And the second is the ribust one:
>
> rmmod i40e and then modprobe i40e. I am not sure as to which of the two
> you aim when talking about rebinding.
>
> I would suggest to start with the first option. It triggers calling the
> probe() callback of I40E, and not the full longer and heavier way with I40E
> module_exit() and module_init() callbacks
>
>
>
> Regarding userspace app for achieving it: you can follow the dpdk testpmd
> code, but
>
> this can take quite a time and effort.
>
>
>
> Regards,
>
> Rami Rosen
>
>
>
>
>
> בתאריך יום א׳, 26 באוג׳ 2018, 22:57, מאת Sebastian Foss <
> sfo@ingenieurbuero-foss.de>:
>
> Hi Rami,
>
> I found the switch for testpmd to use a cmd line script instead of using
> interactive mode. Still need to see if loading a ddp persists on the card
> when rebinding the i40e driver instead of vfio / uio.
>
> The kernel i40e driver also seems to have the functions to use AdminQ to
> load DDPs onto the card – however im not sure how to do it from userland.
>
>
>
>
>
> *Von:* Rami Rosen <ramirose@gmail.com>
> *Gesendet:* Sonntag, 26. August 2018 20:59
> *An:* sfo@ingenieurbuero-foss.de
> *Betreff:* Re: [dts] DDP / testpmd setup
>
>
>
> Hi Sebastian,
>
> I don't know of such a way, unfortunately. Also you cannot automate testpmd
>
> as it is to load the profile automatically without going interactive mode.
>
>
>
> Regards,
>
> Rami Rosen
>
> http://ramirose.wix.com/ramirosen
>
>
>
>
>
>
>
>
>
> On Sun, Aug 26, 2018 at 3:18 PM Sebastian Foss <sfo@ingenieurbuero-foss.de>
> wrote:
>
> Hi,
>
> we are using testpmd to store ddp profiles in an Intel X710DA2 NIC. Is
> there a way to have those profiles stored in the NIC permanently – or what
> would be the best solution to have those profiles loaded automatically at
> boot and use a regular kernel driver afterwards ? From what i understand so
> far to use the DPDK functions to load a DDP Profile the UIO or VFIO drivers
> have to be used.
>
>
>
> Thank you!
>
>
>
> Mit freundlichen Grüßen / Best Regards
>
> Sebastian Foss, Electrical Engineering (B. Eng.)
>
> Hardware & Software Development
>
> Geschäftsführer / CEO
>
> SF Engineering UG & Co. KG
>
>
>
>
>
>
>
> --
>
> regards,
>
> Rami Rosen
>
>
>
> --
>
> regards,
>
> Rami Rosen
>
--
regards,
Rami Rosen
[-- Attachment #2: Type: text/html, Size: 26529 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] DDP / testpmd setup
2018-08-28 14:48 ` Rami Rosen
@ 2018-08-28 14:52 ` Sebastian Foss
0 siblings, 0 replies; 7+ messages in thread
From: Sebastian Foss @ 2018-08-28 14:52 UTC (permalink / raw)
To: 'Rami Rosen'; +Cc: dts
[-- Attachment #1: Type: text/plain, Size: 8200 bytes --]
Hi,
im only using testpmd to upload the ddp tot he card. After that i rebind to i40e and want to change the rss hashing or pppoe for the „regular“ network stack in linux. Seems like ddp is only supported in dpdk right now – although there are ddp references in the i40e linux driver.
Von: Rami Rosen <ramirose@gmail.com>
Gesendet: Dienstag, 28. August 2018 16:49
An: Sebastian Foss <sfo@ingenieurbuero-foss.de>
Cc: dts@dpdk.org
Betreff: Re: [dts] DDP / testpmd setup
Hi Sebastian,
How did you found out it goes all to queue 0 ? is it by running testpmd in RXonly mode, and setting it to verbose
and looking in the content of the packets it shows on the console ? or by any other means ?
Also can you describe your setup - is it with VMs, how do you send the traffic (scapy/pktgen/IXIA)?
Regards,
Rami Rosen
On Tue, Aug 28, 2018 at 5:42 PM Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> > wrote:
I used the latest pppoe ddp from intel’s website and tried to map/add pctypes 15 and 17 to the hashing – then run some pppoe when using i40e again and it still all goes to queue 0.
testpmd> ddp get info /home/dpdktest/ppp-oe-ol2tpv2.pkgo
Global Track id: 0x80000006
Global Version: 1.0.0.0
Global Package name: PPPoE and PPPoL2TPv2
i40e Profile Track id: 0x80000006
i40e Profile Version: 1.0.0.0
i40e Profile name: E710 PPPoE and PPPoL2TPv2
Package Notes:
This profile enables PPPoE and PPPoL2TPv2 parsing
L2TPv2 Tunnel ID extracted to field 46
L2TPv2/PPPoE Session ID extracted to field 47
PPP Protocol ID extracted to field 48
List of supported devices:
8086:1572 FFFF:FFFF
8086:1574 FFFF:FFFF
8086:1580 FFFF:FFFF
8086:1581 FFFF:FFFF
8086:1583 FFFF:FFFF
8086:1584 FFFF:FFFF
8086:1585 FFFF:FFFF
8086:1586 FFFF:FFFF
8086:1587 FFFF:FFFF
8086:1588 FFFF:FFFF
8086:1589 FFFF:FFFF
8086:158A FFFF:FFFF
8086:158B FFFF:FFFF
List of used protocols:
12: IPV4
13: IPV6
15: GRENAT
17: TCP
18: UDP
19: SCTP
20: ICMP
22: L2TPv2CTRL
23: ICMPV6
26: L2TPv2
27: L2TPv2PAY
28: PPPoL2TPv2
29: PPPoE
33: PAY2
34: PAY3
35: PAY4
44: IPV4FRAG
48: IPV6FRAG
52: OIPV4
53: OIPV6
List of defined packet classification types:
14: L2TPv2CTRL
15: PPPoE IPV4
16: PPPoE IPV6
17: PPPoE
18: PPPoL2TPv2 IPV4
19: PPPoL2TPv2 IPV6
20: PPPoL2TPv2
21: L2TPv2PAY
List of defined packet types:
154: PPPoE PAY2
155: PPPoE IPV4FRAG PAY3
156: PPPoE IPV4 PAY3
157: PPPoE IPV4 UDP PAY4
158: PPPoE IPV4 TCP PAY4
159: PPPoE IPV4 SCTP PAY4
160: PPPoE IPV4 ICMP PAY4
161: PPPoE IPV6FRAG PAY3
162: PPPoE IPV6 PAY3
163: PPPoE IPV6 UDP PAY4
164: PPPoE IPV6 TCP PAY4
165: PPPoE IPV6 SCTP PAY4
166: PPPoE IPV6 ICMPV6 PAY4
167: OIPV4 L2TPv2 PPPoL2TPv2 PAY3
168: OIPV4 L2TPv2 PPPoL2TPv2 IPV4FRAG PAY3
169: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 PAY3
170: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 UDP PAY4
171: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 TCP PAY4
172: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 SCTP PAY4
173: OIPV4 L2TPv2 PPPoL2TPv2 IPV4 ICMP PAY4
174: OIPV4 L2TPv2 PPPoL2TPv2 IPV6FRAG PAY3
175: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 PAY3
176: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 UDP PAY4
177: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 TCP PAY4
178: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 SCTP PAY4
179: OIPV4 L2TPv2 PPPoL2TPv2 IPV6 ICMPV6 PAY4
180: OIPV6 L2TPv2 PPPoL2TPv2 PAY3
181: OIPV6 L2TPv2 PPPoL2TPv2 IPV4FRAG PAY3
182: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 PAY3
183: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 UDP PAY4
184: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 TCP PAY4
185: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 SCTP PAY4
186: OIPV6 L2TPv2 PPPoL2TPv2 IPV4 ICMP PAY4
187: OIPV6 L2TPv2 PPPoL2TPv2 IPV6FRAG PAY3
188: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 PAY3
189: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 UDP PAY4
190: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 TCP PAY4
191: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 SCTP PAY4
150: OIPV6 L2TPv2 PPPoL2TPv2 IPV6 ICMPV6 PAY4
12: OIPV4 L2TPv2 L2TPv2CTRL PAY4
13: OIPV6 L2TPv2 L2TPv2CTRL PAY4
14: OIPV4 L2TPv2 L2TPv2PAY PAY3
15: OIPV6 L2TPv2 L2TPv2PAY PAY3
Von: Rami Rosen <ramirose@gmail.com <mailto:ramirose@gmail.com> >
Gesendet: Dienstag, 28. August 2018 16:38
An: Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> >
Cc: dts@dpdk.org <mailto:dts@dpdk.org>
Betreff: Re: [dts] DDP / testpmd setup
Hi Sebastian,
What do you get when running:
testpmd> ddp get info (profile_path)
See:
https://doc.dpdk.org/guides/testpmd_app_ug/testpmd_funcs.html
Regards,
Rami Rosen
On Tue, Aug 28, 2018 at 5:33 PM Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> > wrote:
Hi,
ok seems the ddp profiles are persistent when unbinding and rebinding the dpdk / linux drivers. However it seems like the ddp profile is not used for rss hashing when i bind the i40e driver and run some test (e.g. PPPoE traffic).
Are there any plans to support ddp profiles for rss hashing when i40e is used without dpdk ?
Thanks.
Von: Rami Rosen <ramirose@gmail.com <mailto:ramirose@gmail.com> >
Gesendet: Sonntag, 26. August 2018 22:46
An: Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> >
Cc: dts@dpdk.org <mailto:dts@dpdk.org>
Betreff: Re: [dts] DDP / testpmd setup
Hi, Sebastian,
Regarding rebinding, there are two types:
One is with
dpdk-devbind -b i40e pci_id_of_port
And the second is the ribust one:
rmmod i40e and then modprobe i40e. I am not sure as to which of the two you aim when talking about rebinding.
I would suggest to start with the first option. It triggers calling the probe() callback of I40E, and not the full longer and heavier way with I40E module_exit() and module_init() callbacks
Regarding userspace app for achieving it: you can follow the dpdk testpmd code, but
this can take quite a time and effort.
Regards,
Rami Rosen
בתאריך יום א׳, 26 באוג׳ 2018, 22:57, מאת Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> >:
Hi Rami,
I found the switch for testpmd to use a cmd line script instead of using interactive mode. Still need to see if loading a ddp persists on the card when rebinding the i40e driver instead of vfio / uio.
The kernel i40e driver also seems to have the functions to use AdminQ to load DDPs onto the card – however im not sure how to do it from userland.
Von: Rami Rosen <ramirose@gmail.com <mailto:ramirose@gmail.com> >
Gesendet: Sonntag, 26. August 2018 20:59
An: sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de>
Betreff: Re: [dts] DDP / testpmd setup
Hi Sebastian,
I don't know of such a way, unfortunately. Also you cannot automate testpmd
as it is to load the profile automatically without going interactive mode.
Regards,
Rami Rosen
http://ramirose.wix.com/ramirosen
On Sun, Aug 26, 2018 at 3:18 PM Sebastian Foss <sfo@ingenieurbuero-foss.de <mailto:sfo@ingenieurbuero-foss.de> > wrote:
Hi,
we are using testpmd to store ddp profiles in an Intel X710DA2 NIC. Is there a way to have those profiles stored in the NIC permanently – or what would be the best solution to have those profiles loaded automatically at boot and use a regular kernel driver afterwards ? From what i understand so far to use the DPDK functions to load a DDP Profile the UIO or VFIO drivers have to be used.
Thank you!
Mit freundlichen Grüßen / Best Regards
Sebastian Foss, Electrical Engineering (B. Eng.)
Hardware & Software Development
Geschäftsführer / CEO
SF Engineering UG & Co. KG
--
regards,
Rami Rosen
--
regards,
Rami Rosen
--
regards,
Rami Rosen
[-- Attachment #2: Type: text/html, Size: 39084 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-08-28 14:52 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-26 12:18 [dts] DDP / testpmd setup Sebastian Foss
[not found] ` <CAHLOa7SaSPqRhg5Xhy88efNVsJeba-fKRT7HVmO2sMZ7ccugDg@mail.gmail.com>
2018-08-26 19:57 ` Sebastian Foss
2018-08-26 20:45 ` Rami Rosen
2018-08-28 14:33 ` Sebastian Foss
[not found] ` <CAHLOa7SOMru4yB=bQJSRf4hgq8yZfrmKWdTURaxQxHrGGDjT9A@mail.gmail.com>
2018-08-28 14:42 ` Sebastian Foss
2018-08-28 14:48 ` Rami Rosen
2018-08-28 14:52 ` Sebastian Foss
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).