* [dts][PATCH V5] tests/cvl_qinq: add test cases for cvl qinq switch filter support l4
@ 2022-02-08 15:17 Yaqi Tang
2022-02-09 1:27 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yaqi Tang @ 2022-02-08 15:17 UTC (permalink / raw)
To: dts; +Cc: Yaqi Tang
CVL Support l4 for QinQ switch filter in DCF driver, and port can support as eth / vlan / vlan / IP / tcp|udp.
Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
Tested-by: Yaqi Tang < yaqi.tang@intel.com>
---
tests/TestSuite_cvl_qinq.py | 87 +++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/tests/TestSuite_cvl_qinq.py b/tests/TestSuite_cvl_qinq.py
index a23aeeb3..ad1f78e3 100644
--- a/tests/TestSuite_cvl_qinq.py
+++ b/tests/TestSuite_cvl_qinq.py
@@ -215,6 +215,77 @@ mac_qinq_pppoe_ipv6_dest_mac = {
mac_qinq_pppoe_ipv6 = [mac_qinq_pppoe_ipv6_src_ip, mac_qinq_pppoe_ipv6_dst_ip, mac_qinq_pppoe_ipv6_dest_mac]
+#Non-pipeline mode
+tv_mac_qinq_ipv4 = {
+ 'name': 'tv_mac_qinq_ipv4',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.3", dst="192.168.1.2")/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv6 = {
+ 'name': 'tv_mac_qinq_ipv6',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv4_udp = {
+ 'name': 'tv_mac_qinq_ipv4_udp',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv4_tcp = {
+ 'name': 'tv_mac_qinq_ipv4_tcp',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tvs_mac_l4_qinq_dcf_non_pipeline_mode = [tv_mac_qinq_ipv4, tv_mac_qinq_ipv6, tv_mac_qinq_ipv4_udp, tv_mac_qinq_ipv4_tcp]
+
+#Pipeline mode
+tv_mac_qinq_ipv6_udp = {
+ 'name': 'tv_mac_qinq_ipv6_udp',
+ 'rule': 'flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tv_mac_qinq_ipv6_tcp = {
+ 'name': 'tv_mac_qinq_ipv6_tcp',
+ 'rule': 'flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=50,dport=22)/("X"*80)']},
+ 'check_param': {'port_id': 1}
+}
+
+tvs_mac_l4_qinq_dcf_pipeline_mode = [tv_mac_qinq_ipv6_udp, tv_mac_qinq_ipv6_tcp]
class TestCvlQinq(TestCase):
@@ -509,6 +580,22 @@ class TestCvlQinq(TestCase):
self.launch_testpmd()
self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv6)
+ def test_mac_l4_qinq_dcf_non_pipeline_mode(self):
+ """
+ DCF switch for MAC_L4_QINQ
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_non_pipeline_mode)
+
+ def test_mac_l4_qinq_dcf_pipeline_mode(self):
+ """
+ DCF switch for MAC_L4_QINQ_IPV6
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_pipeline_mode)
+
def reset_vf(self):
self.pmd_output.execute_cmd("port stop 2")
self.pmd_output.execute_cmd("port reset 2")
--
2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: [dts][PATCH V5] tests/cvl_qinq: add test cases for cvl qinq switch filter support l4
2022-02-08 15:17 [dts][PATCH V5] tests/cvl_qinq: add test cases for cvl qinq switch filter support l4 Yaqi Tang
@ 2022-02-09 1:27 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2022-02-09 1:27 UTC (permalink / raw)
To: Tang, Yaqi, dts; +Cc: Tang, Yaqi
> -----Original Message-----
> From: Yaqi Tang <yaqi.tang@intel.com>
> Sent: 2022年2月8日 23:17
> To: dts@dpdk.org
> Cc: Tang, Yaqi <yaqi.tang@intel.com>
> Subject: [dts][PATCH V5] tests/cvl_qinq: add test cases for cvl qinq switch filter
> support l4
>
> CVL Support l4 for QinQ switch filter in DCF driver, and port can support as eth /
> vlan / vlan / IP / tcp|udp.
>
> Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
> Tested-by: Yaqi Tang < yaqi.tang@intel.com>
Applied
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-02-09 1:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-08 15:17 [dts][PATCH V5] tests/cvl_qinq: add test cases for cvl qinq switch filter support l4 Yaqi Tang
2022-02-09 1:27 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).