* [dts] [next] [PATCH 1/3] framework: support argument: --update-expected.
2018-07-20 15:22 [dts] [next] [PATCH 0/3] support update-expected to meet Open Lab requirement Lijuan Tu
@ 2018-07-20 15:22 ` Lijuan Tu
2018-07-20 7:23 ` Liu, Yong
2018-07-20 15:22 ` [dts] [next] [PATCH 2/3] tests/nic_single_core_perf: remove hardcode Lijuan Tu
2018-07-20 15:22 ` [dts] [next] [PATCH 3/3] conf/nic_single_core_perf: redefine elements Lijuan Tu
2 siblings, 1 reply; 5+ messages in thread
From: Lijuan Tu @ 2018-07-20 15:22 UTC (permalink / raw)
To: dts, pmacarth, alialnu; +Cc: Lijuan Tu
A DPDK Performance Test Lab are established, and Specification requires
DTS to support an --update-expected argument which will cause the
script to update values based on the results of the current test run.
Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
framework/config.py | 11 +++++++++++
framework/dts.py | 6 +++++-
framework/main.py | 6 +++++-
framework/settings.py | 1 +
framework/test_case.py | 22 ++++++++++++++++++----
5 files changed, 40 insertions(+), 6 deletions(-)
diff --git a/framework/config.py b/framework/config.py
index 628fc6d..0b112d8 100644
--- a/framework/config.py
+++ b/framework/config.py
@@ -147,6 +147,17 @@ class SuiteConf(UserConf):
return case_cfg
+ def update_case_config(self, case_name=""):
+ """
+ update section (case_name) of the configure file
+ """
+ update_suite_cfg_obj = UserConf(self.config_file)
+ update_suite_cfg = update_suite_cfg_obj.load_section(case_name)
+ for key in update_suite_cfg_obj.conf.options(case_name):
+ update_suite_cfg_obj.conf.set(
+ case_name, key, str(self.suite_cfg[key]))
+ update_suite_cfg_obj.conf.write(open(self.config_file, 'w'))
+
class VirtConf(UserConf):
diff --git a/framework/dts.py b/framework/dts.py
index 0b2240c..4435418 100644
--- a/framework/dts.py
+++ b/framework/dts.py
@@ -439,7 +439,7 @@ def dts_run_suite(duts, tester, test_suites, target):
def run_all(config_file, pkgName, git, patch, skip_setup,
read_cache, project, suite_dir, test_cases,
base_dir, output_dir, verbose, virttype, debug,
- debugcase, re_run, commands):
+ debugcase, re_run, commands, update_expected):
"""
Main process of DTS, it will run all test suites in the config file.
"""
@@ -479,6 +479,10 @@ def run_all(config_file, pkgName, git, patch, skip_setup,
if debugcase is True:
settings.save_global_setting(settings.DEBUG_CASE_SETTING, 'yes')
+ # enable update-expected
+ if update_expected is True:
+ settings.save_global_setting(settings.UPDATE_EXPECTED, 'yes')
+
# init log_handler handler
if verbose is True:
logger.set_verbose()
diff --git a/framework/main.py b/framework/main.py
index 0aa54fd..9d7ef31 100755
--- a/framework/main.py
+++ b/framework/main.py
@@ -143,6 +143,10 @@ parser.add_argument('--commands',
help='run command on tester or dut. The command format is ' +
'[commands]:dut|tester:pre-init|post-init:check|ignore')
+parser.add_argument('--update-expected',
+ action='store_true',
+ help='update expected values based on test results')
+
args = parser.parse_args()
@@ -159,4 +163,4 @@ dts.run_all(args.config_file, args.snapshot, args.git,
args.patch, args.skip_setup, args.read_cache,
args.project, args.suite_dir, args.test_cases,
args.dir, args.output, args.verbose,args.virttype,
- args.debug, args.debugcase, args.re_run, args.commands)
+ args.debug, args.debugcase, args.re_run, args.commands, args.update_expected)
diff --git a/framework/settings.py b/framework/settings.py
index 07c3ac6..2561ddb 100644
--- a/framework/settings.py
+++ b/framework/settings.py
@@ -218,6 +218,7 @@ DPDK_RXMODE_SETTING = "DTS_DPDK_RXMODE"
DTS_ERROR_ENV = "DTS_RUNNING_ERROR"
DTS_CFG_FOLDER = "DTS_CFG_FOLDER"
DTS_PARALLEL_SETTING = "DTS_PARALLEL_ENABLE"
+UPDATE_EXPECTED = "DTS_UPDATE_EXPECTED_ENABLE"
"""
diff --git a/framework/test_case.py b/framework/test_case.py
index a84e2bb..ffa03db 100644
--- a/framework/test_case.py
+++ b/framework/test_case.py
@@ -40,7 +40,9 @@ import time
from exception import VerifyFailure, TimeoutException
from settings import DRIVERS, NICS, get_nic_name, load_global_setting
-from settings import PERF_SETTING, FUNC_SETTING, DEBUG_SETTING, DEBUG_CASE_SETTING, HOST_DRIVER_SETTING
+from settings import PERF_SETTING, FUNC_SETTING, DEBUG_SETTING
+from settings import DEBUG_CASE_SETTING, HOST_DRIVER_SETTING
+from settings import UPDATE_EXPECTED, SUITE_SECTION_NAME
from rst import RstReport
from test_result import ResultTable, Result
from logger import getLogger
@@ -254,10 +256,7 @@ class TestCase(object):
self._rst_obj.write_title("Test Case: " + case_name)
# load suite configuration file here for rerun command
- self._suite_conf = SuiteConf(self.suite_name)
- self._suite_cfg = self._suite_conf.suite_cfg
self._case_cfg = self._suite_conf.load_case_config(case_name)
- del(self._suite_conf)
case_result = True
if self._check_inst is not None:
@@ -315,6 +314,9 @@ class TestCase(object):
self._suite_result.test_case_failed(trace)
self.logger.error('Test Case %s Result ERROR: ' % (case_name) + trace)
finally:
+ # update expected
+ if load_global_setting(UPDATE_EXPECTED) == "yes":
+ self._suite_conf.update_case_config(SUITE_SECTION_NAME)
self.tear_down()
return case_result
@@ -375,6 +377,18 @@ class TestCase(object):
"""
return self._suite_cfg
+ def update_suite_cfg(self, suite_cfg):
+ """
+ Update suite based configuration
+ """
+ self._suite_cfg = suite_cfg
+
+ def update_suite_cfg_ele(self, key, value):
+ """
+ update one element of suite configuration
+ """
+ self._suite_cfg[key]=value
+
def execute_tear_downall(self):
"""
execute suite tear_down_all function
--
1.8.3.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [dts] [next] [PATCH 2/3] tests/nic_single_core_perf: remove hardcode
2018-07-20 15:22 [dts] [next] [PATCH 0/3] support update-expected to meet Open Lab requirement Lijuan Tu
2018-07-20 15:22 ` [dts] [next] [PATCH 1/3] framework: support argument: --update-expected Lijuan Tu
@ 2018-07-20 15:22 ` Lijuan Tu
2018-07-20 15:22 ` [dts] [next] [PATCH 3/3] conf/nic_single_core_perf: redefine elements Lijuan Tu
2 siblings, 0 replies; 5+ messages in thread
From: Lijuan Tu @ 2018-07-20 15:22 UTC (permalink / raw)
To: dts, pmacarth, alialnu; +Cc: Lijuan Tu
Current script have lots of hardcode, remove them, and re-define
configuration file.
Support --update-expected argument.
Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
tests/TestSuite_nic_single_core_perf.py | 374 ++++++++++++++++----------------
1 file changed, 189 insertions(+), 185 deletions(-)
diff --git a/tests/TestSuite_nic_single_core_perf.py b/tests/TestSuite_nic_single_core_perf.py
index 0cb1394..e361ffc 100644
--- a/tests/TestSuite_nic_single_core_perf.py
+++ b/tests/TestSuite_nic_single_core_perf.py
@@ -39,12 +39,14 @@ import re
import time
from test_case import TestCase
from time import sleep
-from settings import HEADER_SIZE
+from exception import VerifyFailure
+from settings import HEADER_SIZE, UPDATE_EXPECTED, load_global_setting
from pmd_output import PmdOutput
from copy import deepcopy
from prettytable import PrettyTable
import rst
+
class TestNicSingleCorePerf(TestCase):
def set_up_all(self):
@@ -52,260 +54,257 @@ class TestNicSingleCorePerf(TestCase):
Run at the start of each test suite.
PMD prerequisites.
"""
+ self.verify(self.nic in ['niantic', 'fortville_25g', 'fortville_spirit',
+ 'ConnectX5_MT4121', 'ConnectX4_LX_MT4117'],
+ "Not required NIC ")
- self.frame_sizes = [64]
self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip']
- self.ixgbe_descriptors = [128, 512, 2048]
- self.i40e_descriptors = [512, 2048]
- self.cx5_descriptors = [128, 256, 512, 2048]
- self.cx4lx25g_descriptors = [128, 256, 512, 2048]
- self.cx4lx40g_descriptors = [128, 256, 512, 2048]
+
+ # test parameters include: frames size, descriptor numbers
+ self.test_parameters = self.get_suite_cfg()['test_parameters']
# traffic duraion in second
- self.trafficDuration = 60
+ self.test_duration = self.get_suite_cfg()['test_duration']
- #load the expected throughput for required nic
- self.expected_throughput_nnt = self.get_suite_cfg()["throughput_nnt"]
- self.expected_throughput_fvl25g = self.get_suite_cfg()["throughput_fvl25g"]
- self.expected_throughput_fvl40g = self.get_suite_cfg()["throughput_fvl40g"]
- self.expected_throughput_cx5 = self.get_suite_cfg()["throughput_cx5"]
- self.expected_throughput_cx4lx25g = self.get_suite_cfg()["throughput_cx4lx25g"]
- self.expected_throughput_cx4lx40g = self.get_suite_cfg()["throughput_cx4lx40g"]
+ # load the expected throughput for required nic
+ if self.nic in ["ConnectX4_LX_MT4117"]:
+ nic_speed = self.dut.ports_info[0]['port'].get_nic_speed()
+ if nic_speed == "25000":
+ self.expected_throughput = self.get_suite_cfg(
+ )['expected_throughput'][self.nic]['25G']
+ else:
+ self.expected_throughput = self.get_suite_cfg(
+ )['expected_throughput'][self.nic]['40G']
+ else:
+ self.expected_throughput = self.get_suite_cfg()[
+ 'expected_throughput'][self.nic]
+
+ # initilize throughput attribution
+ # {'$framesize':{"$nb_desc": 'throughput'}
+ self.throughput = {}
- # The acdepted gap between expected throughput and actual throughput, 1 Mpps
- self.gap = 1
+ # Accepted tolerance in Mpps
+ self.gap = self.get_suite_cfg()['accepted_tolerance']
# header to print test result table
- self.table_header = ['Frame Size', 'TXD/RXD', 'Throughput', 'Rate', 'Expected Throughput']
+ self.table_header = ['Frame Size', 'TXD/RXD', 'Throughput', 'Rate',
+ 'Expected Throughput', 'Throughput Difference']
+ self.test_result = {}
# Update config file and rebuild to get best perf on FVL
if self.nic in ["fortville_25g", "fortville_spirit"]:
- self.dut.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=y/' ./config/common_base", "#", 20)
- self.dut.build_install_dpdk(self.target)
+ self.dut.send_expect(
+ "sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=y/' ./config/common_base", "#", 20)
+ # self.dut.build_install_dpdk(self.target)
# Based on h/w type, choose how many ports to use
self.dut_ports = self.dut.get_ports()
-
self.socket = self.dut.get_numa_id(self.dut_ports[0])
-
self.pmdout = PmdOutput(self.dut)
- self.test_result = {}
-
# determine if to save test result as a separated file
- self.save_result_flag = True
+ self.save_result_flag = True
def set_up(self):
"""
Run before each test case.
"""
- if self.nic == "niantic":
- self.descriptors = self.ixgbe_descriptors
- elif self.nic in ["fortville_25g", "fortville_spirit"]:
- self.descriptors = self.i40e_descriptors
- elif self.nic in ["ConnectX5_MT4121"]:
- self.descriptors = self.cx5_descriptors
- elif self.nic in ["ConnectX4_LX_MT4117"]:
- nic_speed = self.dut.ports_info[0]['port'].get_nic_speed()
- if nic_speed == "25000":
- self.descriptors = self.cx4lx25g_descriptors
- else:
- self.descriptors = self.cx4lx40g_descriptors
- else:
- raise Exception("Not required NIC")
+ pass
def test_nic_single_core_perf(self):
"""
Run nic single core performance
"""
- self.verify(len(self.dut_ports) == 2 or len(self.dut_ports) == 4, "Require 2 or 4 ports to test")
- self.verify(self.nic in ['niantic', 'fortville_25g', 'fortville_spirit',
- 'ConnectX5_MT4121', 'ConnectX4_LX_MT4117'], "Not required NIC ")
- if len(self.dut_ports) == 2:
- self.perf_test(2)
- elif len(self.dut_ports) == 4:
- self.perf_test(4)
+ self.nb_ports = len(self.dut_ports)
+ self.verify(self.nb_ports == 2 or self.nb_ports == 4,
+ "Require 2 or 4 ports to test")
+ self.perf_test(self.nb_ports)
+ self.handle_results()
+
+ # check the gap between expected throughput and actual throughput
+ try:
+ for frame_size in self.test_parameters.keys():
+ for nb_desc in self.test_parameters[frame_size]:
+ cur_gap = (self.expected_throughput[frame_size][nb_desc] -
+ self.throughput[frame_size][nb_desc])
+ self.verify(cur_gap < self.gap,
+ "Beyond Gap, Possible regression")
+ except Exception as e:
+ self.logger.error(e)
+ self.handle_expected()
+ raise VerifyFailure(
+ "Possible regression, Check your configuration please")
+ else:
+ self.handle_expected()
+
+ def handle_expected(self):
+ """
+ Update expected numbers to configurate file: conf/$suite_name.cfg
+ """
+ if load_global_setting(UPDATE_EXPECTED) == "yes":
+ for frame_size in self.test_parameters.keys():
+ for nb_desc in self.test_parameters[frame_size]:
+ self.expected_throughput[frame_size][nb_desc] = \
+ self.throughput[frame_size][nb_desc]
def perf_test(self, port_num):
"""
Single core Performance Benchmarking test
"""
- # traffic option
- options = {
- 'rate' : '100%',
- #'ip': {'action': 'inc', 'mask' : '255.255.255.0', 'step': '0.0.0.1'}
- }
+ # ports whitelist
+ eal_para = ""
+ for i in range(self.nb_ports):
+ eal_para += " -w " + self.dut.ports_info[i]['pci']
- header = self.table_header
- if port_num == 2:
- pci0 = self.dut.ports_info[0]['pci']
- pci1 = self.dut.ports_info[1]['pci']
- eal = "-w %s -w %s" % (pci0, pci1)
- elif port_num == 4:
- pci0 = self.dut.ports_info[0]['pci']
- pci1 = self.dut.ports_info[1]['pci']
- pci2 = self.dut.ports_info[2]['pci']
- pci3 = self.dut.ports_info[3]['pci']
- eal = "-w %s -w %s -w %s -w %s" % (pci0, pci1, pci2, pci3)
-
- # run testpmd with 2 cores
+ # run testpmd with 2 cores, one for interaction ,and one for forwarding
core_config = "1S/2C/1T"
- core_list = self.dut.get_core_list(core_config, socket=self.socket)
+ core_list = self.dut.get_core_list(core_config, socket = self.socket)
+ self.logger.info("Executing Test Using cores: %s" % core_list)
port_mask = utils.create_mask(self.dut_ports)
- for frame_size in self.frame_sizes:
- ret_datas = {}
- for descriptor in self.descriptors:
- self.logger.info("Executing Test Using cores: %s" % core_list)
- if self.nic in ["fortville_25g", "fortville_spirit"]:
- self.pmdout.start_testpmd(core_config, "--portmask=%s --txd=%d --rxd=%d --rxq=2 --txq=2" % (port_mask, descriptor, descriptor),eal, socket=self.socket)
- else:
- self.pmdout.start_testpmd(core_config, "--portmask=%s --txd=%d --rxd=%d" % (port_mask, descriptor, descriptor),eal, socket=self.socket)
+ # parameters for application/testpmd
+ param = " --portmask=%s" % (port_mask)
+ # fortville has to use 2 queues at least to get the best performance
+ if self.nic in ["fortville_25g", "fortville_spirit"]:
+ param += " --rxq=2 --txq=2"
+
+ for frame_size in self.test_parameters.keys():
+ self.throughput[frame_size] = dict()
+ for nb_desc in self.test_parameters[frame_size]:
+ self.logger.info("Test running at parameters: " +
+ "framesize: {}, rxd/txd: {}".format(frame_size, nb_desc))
+ parameter = param + " --txd=%d --rxd=%d" % (nb_desc, nb_desc)
+ self.pmdout.start_testpmd(
+ core_config, parameter, eal_para, socket = self.socket)
self.dut.send_expect("start", "testpmd> ", 15)
- self.logger.info("Running with frame size %d " % frame_size)
-
- # create pcap file
- payload_size = frame_size - self.headers_size
- self.tester.scapy_append(
- 'wrpcap("test.pcap", [Ether(src="52:00:00:00:00:00")/IP(src="1.2.3.4",dst="1.1.1.1")/("X"*%d)])' % payload_size)
- self.tester.scapy_execute()
- self.tester.scapy_append(
- 'wrpcap("test1.pcap", [Ether(src="52:00:00:00:00:00")/IP(src="2.2.3.4",dst="1.1.1.1")/("X"*%d)])' % payload_size)
- self.tester.scapy_execute()
-
- # send the traffic
- streams = self.prepare_stream(port_num, options)
- _, packets_received = self.tester.pktgen.measure_throughput(stream_ids=streams, delay=self.trafficDuration)
-
+ # measure throughput
+ stream_ids = self.prepare_stream(frame_size)
+ _, packets_received = self.tester.pktgen.measure_throughput(
+ stream_ids = stream_ids, delay = self.test_duration)
throughput = packets_received / 1000000.0
+ self.throughput[frame_size][nb_desc] = throughput
self.dut.send_expect("stop", "testpmd> ")
self.dut.send_expect("quit", "# ", 30)
- self.logger.info("Throughput result for Descriptor :%s is :%s Mpps" % (descriptor, throughput))
+ self.verify(throughput,
+ "No traffic detected, please check your configuration")
+ self.logger.info("Trouthput of " +
+ "framesize: {}, rxd/txd: {} is :{} Mpps".format(
+ frame_size, nb_desc, throughput))
+
+ return self.throughput
- wirespeed = self.wirespeed(self.nic, frame_size, port_num)
+ def handle_results(self):
+ """
+ results handled process:
+ 1, save to self.test_results
+ 2, create test results table
+ 3, save to json file for Open Lab
+ """
- # one entry for test result record
+ # save test results to self.test_result
+ header = self.table_header
+ for frame_size in self.test_parameters.keys():
+ wirespeed = self.wirespeed(self.nic, frame_size, self.nb_ports)
+ ret_datas = {}
+ for nb_desc in self.test_parameters[frame_size]:
ret_data = {}
ret_data[header[0]] = frame_size
- ret_data[header[1]] = descriptor
- ret_data[header[2]] = str(float("%.3f" % throughput)) + " Mpps"
- ret_data[header[3]] = str(float("%.3f" % (throughput * 100 / wirespeed))) + "%"
- if self.nic == "niantic":
- ret_data[header[4]] = str(self.expected_throughput_nnt[frame_size][descriptor]) + " Mpps"
- elif self.nic == "fortville_25g":
- ret_data[header[4]] = str(self.expected_throughput_fvl25g[frame_size][descriptor]) + " Mpps"
- elif self.nic == "fortville_spirit":
- ret_data[header[4]] = str(self.expected_throughput_fvl40g[frame_size][descriptor]) + " Mpps"
- elif self.nic == "ConnectX5_MT4121":
- ret_data[header[4]] = str(self.expected_throughput_cx5[frame_size][descriptor]) + " Mpps"
- elif self.nic == "ConnectX4_LX_MT4117":
- nic_speed = self.dut.ports_info[0]['port'].get_nic_speed()
- if nic_speed == "25000":
- ret_data[header[4]] = str(self.expected_throughput_cx4lx25g[frame_size][descriptor]) + " Mpps"
- else:
- ret_data[header[4]] = str(self.expected_throughput_cx4lx40g[frame_size][descriptor]) + " Mpps"
- ret_datas[descriptor] = deepcopy(ret_data)
- self.test_result[frame_size] = deepcopy(ret_datas)
-
- for frame_size in self.frame_sizes:
- for descriptor in self.descriptors:
- self.verify(self.test_result[frame_size][descriptor][header[2]] > 0, "No traffic detected")
-
- # Print results
+ ret_data[header[1]] = nb_desc
+ ret_data[header[2]] = "{:.3f} Mpps".format(
+ self.throughput[frame_size][nb_desc])
+ ret_data[header[3]] = "{:.3f}%".format(
+ self.throughput[frame_size][nb_desc] * 100 / wirespeed)
+ ret_data[header[4]] = "{:.3f} Mpps".format(
+ self.expected_throughput[frame_size][nb_desc])
+ ret_data[header[5]] = "{:.3f} Mpps".format(
+ self.throughput[frame_size][nb_desc] -
+ self.expected_throughput[frame_size][nb_desc])
+
+ ret_datas[nb_desc] = deepcopy(ret_data)
+ self.test_result[frame_size] = deepcopy(ret_datas)
+
+ # Create test results table
self.result_table_create(header)
- for frame_size in self.frame_sizes:
- for descriptor in self.descriptors:
- table_row = [self.test_result[frame_size][descriptor][header[0]]]
- table_row.append(self.test_result[frame_size][descriptor][header[1]])
- table_row.append(self.test_result[frame_size][descriptor][header[2]])
- table_row.append(self.test_result[frame_size][descriptor][header[3]])
- table_row.append(self.test_result[frame_size][descriptor][header[4]])
+ for frame_size in self.test_parameters.keys():
+ for nb_desc in self.test_parameters[frame_size]:
+ table_row = list()
+ for i in range(len(header)):
+ table_row.append(
+ self.test_result[frame_size][nb_desc][header[i]])
self.result_table_add(table_row)
-
+ # present test results to screen
self.result_table_print()
# save test results as a file
if self.save_result_flag:
self.save_result(self.test_result)
- # check if the gap between expected throughput and actual throughput exceed accepted gap
- for frame_size in self.frame_sizes:
- for descriptor in self.descriptors:
- self.verify(float(self.test_result[frame_size][descriptor][header[4]].split()[0]) -
- float(self.test_result[frame_size][descriptor][header[2]].split()[0]) < self.gap, "Exceeded Gap")
-
- def prepare_stream(self, port_num, options):
+ def prepare_stream(self, frame_size):
'''
- create streams for ports, one port one stream
+ create streams for ports, one port two streams, and configure them.
'''
- # configure 2 streams for each tx port
- if port_num == 2:
- txport0 = self.tester.get_local_port(self.dut.get_ports()[0])
- txport1 = self.tester.get_local_port(self.dut.get_ports()[1])
- stream_id0 = self.tester.pktgen.add_stream(txport0, txport1, r'/root/test.pcap')
- stream_id1 = self.tester.pktgen.add_stream(txport0, txport1, r'/root/test1.pcap')
- stream_id2 = self.tester.pktgen.add_stream(txport1, txport0, r'/root/test.pcap')
- stream_id3 = self.tester.pktgen.add_stream(txport1, txport0, r'/root/test1.pcap')
- self.tester.pktgen.config_stream(stream_id0, options)
- self.tester.pktgen.config_stream(stream_id1, options)
- self.tester.pktgen.config_stream(stream_id2, options)
- self.tester.pktgen.config_stream(stream_id3, options)
- return [stream_id0, stream_id1, stream_id2, stream_id3]
- # configure 1 stream for each tx port
- elif port_num == 4:
- txport0 = self.tester.get_local_port(self.dut.get_ports()[0])
- txport1 = self.tester.get_local_port(self.dut.get_ports()[1])
- txport2 = self.tester.get_local_port(self.dut.get_ports()[2])
- txport3 = self.tester.get_local_port(self.dut.get_ports()[3])
- stream_id0 = self.tester.pktgen.add_stream(txport0, txport1, r'/root/test.pcap')
- stream_id1 = self.tester.pktgen.add_stream(txport1, txport0, r'/root/test.pcap')
- stream_id2 = self.tester.pktgen.add_stream(txport2, txport3, r'/root/test.pcap')
- stream_id3 = self.tester.pktgen.add_stream(txport3, txport2, r'/root/test.pcap')
- self.tester.pktgen.config_stream(stream_id0, options)
- self.tester.pktgen.config_stream(stream_id1, options)
- self.tester.pktgen.config_stream(stream_id2, options)
- self.tester.pktgen.config_stream(stream_id3, options)
- return [stream_id0, stream_id1, stream_id2, stream_id3]
+ # traffic option
+ options = {
+ 'rate': '100%',
+ # 'ip': {'action': 'inc', 'mask' : '255.255.255.0', 'step': '0.0.0.1'}
+ }
+
+ # create pcap file
+ payload_size = frame_size - self.headers_size
+ self.tester.scapy_append(
+ 'wrpcap("/tmp/test0.pcap", [Ether(src="52:00:00:00:00:00")/IP(src="1.2.3.4",dst="1.1.1.1")/("X"*%d)])' % payload_size)
+ self.tester.scapy_append(
+ 'wrpcap("/tmp/test1.pcap", [Ether(src="52:00:00:00:00:00")/IP(src="2.2.3.4",dst="1.1.1.1")/("X"*%d)])' % payload_size)
+ self.tester.scapy_execute()
+
+ stream_ids = []
+ for i in range(self.nb_ports):
+ if i % 2 == 0:
+ txport = self.tester.get_local_port(self.dut.get_ports()[i])
+ rxport = self.tester.get_local_port(
+ self.dut.get_ports()[i + 1])
+
+ # fortville requires 2 streams for 2 queues at least, and
+ # this's fine for other NIC too.
+ for k in range(2):
+ # txport -> rxport
+ stream_id = self.tester.pktgen.add_stream(
+ txport, rxport, '/tmp/test{}.pcap'.format(k))
+ self.tester.pktgen.config_stream(stream_id, options)
+ stream_ids.append(stream_id)
+ # rxport -> txport
+ stream_id = self.tester.pktgen.add_stream(
+ rxport, txport, '/tmp/test{}.pcap'.format(k))
+ self.tester.pktgen.config_stream(stream_id, options)
+ stream_ids.append(stream_id)
+
+ return stream_ids
def save_result(self, data):
'''
- Saves the test results as a separated file named with self.nic+_single_core_perf.txt
- in output folder if self.save_result_flag is True
+ Saves the test results as a separated file named with
+ self.nic+_single_core_perf.json in output folder
+ if self.save_result_flag is True
'''
- header = self.table_header
- table = PrettyTable(header)
- for frame_size in self.frame_sizes:
- for descriptor in self.descriptors:
- table_row = [self.test_result[frame_size][descriptor][header[0]]]
- table_row.append(self.test_result[frame_size][descriptor][header[1]])
- table_row.append(self.test_result[frame_size][descriptor][header[2]])
- table_row.append(self.test_result[frame_size][descriptor][header[3]])
- table_row.append(self.test_result[frame_size][descriptor][header[4]])
- table.add_row(table_row)
- file_to_save = open(os.path.join(
- rst.path2Result, "%s_single_core_perf.txt" % self.nic), 'w')
- file_to_save.write(str(table))
- file_to_save.close()
-
json_obj = dict()
json_obj['nic_type'] = self.nic
json_obj['results'] = list()
- for frame_size in self.frame_sizes:
- for descriptor in self.descriptors:
- row_in = self.test_result[frame_size][descriptor]
+ for frame_size in self.test_parameters.keys():
+ for nb_desc in self.test_parameters[frame_size]:
+ row_in = self.test_result[frame_size][nb_desc]
row_dict = dict()
row_dict['parameters'] = dict()
row_dict['parameters']['frame_size'] = dict(
- value=row_in['Frame Size'], unit='bytes')
+ value = row_in['Frame Size'], unit = 'bytes')
row_dict['parameters']['txd/rxd'] = dict(
- value=row_in['TXD/RXD'], unit='descriptors')
+ value = row_in['TXD/RXD'], unit = 'descriptors')
delta = (float(row_in['Throughput'].split()[0]) -
float(row_in['Expected Throughput'].split()[0]))
row_dict['throughput'] = dict(
- delta=delta, unit=row_in['Throughput'].split()[1])
+ delta = delta, unit = row_in['Throughput'].split()[1])
json_obj['results'].append(row_dict)
with open(os.path.join(rst.path2Result,
'{0:s}_single_core_perf.json'.format(
@@ -316,11 +315,16 @@ class TestNicSingleCorePerf(TestCase):
"""
Run after each test case.
"""
- if self.nic in ["fortville_25g"]:
- self.dut.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=y/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/' ./config/common_base", "#", 20)
+ pass
def tear_down_all(self):
"""
Run after each test suite.
"""
+ # resume setting
+ if self.nic in ["fortville_25g", "fortville_spirit"]:
+ self.dut.send_expect(
+ "sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=y/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/' ./config/common_base", "#", 20)
+ # self.dut.build_install_dpdk(self.target)
+
self.dut.kill_all()
--
1.8.3.1
^ permalink raw reply [flat|nested] 5+ messages in thread