From: Peng Yuan <yuan.peng@intel.com>
To: dts@dpdk.org
Cc: Peng Yuan <yuan.peng@intel.com>
Subject: [dts] [PATCH] tests: Add verification after flush rule to TestSuite_queue_region.py
Date: Thu, 16 Aug 2018 18:48:07 +0800 [thread overview]
Message-ID: <1534416487-122625-1-git-send-email-yuan.peng@intel.com> (raw)
Add some verification after flush rule,
Change some actions for fortpark card.
The packet not match any queue region rule will go to queue region 0.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/tests/TestSuite_queue_region.py b/tests/TestSuite_queue_region.py
index 9615388..2e4348a 100644
--- a/tests/TestSuite_queue_region.py
+++ b/tests/TestSuite_queue_region.py
@@ -196,20 +196,19 @@ class TestQueue_region(TestCase):
def test_pctype_map_queue_region(self):
# set queue region on a port
- self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 1 queue_num 1", "testpmd> ")
+ self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 1 queue_num 2", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 1 queue_start_index 3 queue_num 2", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 2 queue_start_index 6 queue_num 2", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 3 queue_start_index 8 queue_num 2", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 4 queue_start_index 11 queue_num 4", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 5 queue_start_index 15 queue_num 1", "testpmd> ")
- self.dut.send_expect("set port 0 queue-region region_id 6 queue_start_index 2 queue_num 1", "testpmd> ")
+ self.dut.send_expect("set port 0 queue-region region_id 6 queue_start_index 5 queue_num 1", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 7 queue_start_index 10 queue_num 1", "testpmd> ")
# Set the mapping of flowtype to region index on a port
self.dut.send_expect("set port 0 queue-region region_id 0 flowtype 31", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 1 flowtype 32", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 2 flowtype 33", "testpmd> ")
- self.dut.send_expect("set port 0 queue-region region_id 3 flowtype 34", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 4 flowtype 35", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 6 flowtype 36", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 2 flowtype 41", "testpmd> ")
@@ -217,22 +216,16 @@ class TestQueue_region(TestCase):
self.dut.send_expect("set port 0 queue-region region_id 4 flowtype 44", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 5 flowtype 45", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 7 flowtype 46", "testpmd> ")
- self.dut.send_expect("set port 0 queue-region region_id 1 flowtype 63", "testpmd> ")
self.dut.send_expect("set port 0 queue-region flush on", "testpmd> ")
# send the packets and verify the results
- queue_region = ["1"]
+ queue_region = ["1", "2"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="udp")
# fortville can't parse the TCP SYN type packet, fortpark can parse it.
- # but you need to update hardware defined pctype to software defined
- # flow type mapping table manully.
if(self.nic in ["fortpark_TLV"]):
- self.dut.send_expect("port config 0 pctype mapping update 32 1", "testpmd> ")
- self.dut.send_expect("port config all rss 1", "testpmd> ")
queue_region = ["3", "4"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="tcp", flags="S")
- self.dut.send_expect("port config all rss all", "testpmd> ")
else:
queue_region = ["6", "7"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="tcp", flags="S")
@@ -240,17 +233,25 @@ class TestQueue_region(TestCase):
queue_region = ["6", "7"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="tcp", flags="PA")
- queue_region = ["8", "9"]
+ # not assign ipv4-sctp packet to any queue region, the packet to queue region 0.
+ queue_region = ["1", "2"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="sctp", tag=1)
queue_region = ["11", "12", "13", "14"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv4")
- queue_region = ["2"]
+ queue_region = ["5"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv4", frag=1)
- queue_region = ["8", "9"]
- self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_tcp")
+ # fortville can't parse the TCP SYN type packet, fortpark can parse it.
+ # default is SYN mode.
+ # not assign ipv4-tcp SYN packet to any queue region, the packet to queue region 0.
+ if(self.nic in ["fortpark_TLV"]):
+ queue_region = ["1", "2"]
+ self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_tcp")
+ else:
+ queue_region = ["8", "9"]
+ self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_tcp")
queue_region = ["11", "12", "13", "14"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6_sctp", tag=2)
@@ -261,7 +262,8 @@ class TestQueue_region(TestCase):
queue_region = ["15"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="ipv6")
- queue_region = ["3", "4"]
+ # not assign L2 packet to any queue region, the packet to queue region 0.
+ queue_region = ["1", "2"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="L2", ethertype=0x88bb)
queue_region = ["11", "12", "13", "14"]
@@ -270,14 +272,28 @@ class TestQueue_region(TestCase):
# clear all the queue region configuration
# check if there is 1 flow rule have been created
out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
- self.get_and_compare_rules(out, 8, 12, 0)
+ self.get_and_compare_rules(out, 8, 10, 0)
self.dut.send_expect("set port 0 queue-region flush off", "testpmd> ")
out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
self.get_and_compare_rules(out, 0, 0, 0)
+ # confirm packet not to the same queue after flush all the queue region rull.
+ self.send_packet_pctype(mac=self.pf_mac, pkt_type="udp")
+ queue = self.get_queue_number()
+ self.verify(queue not in ["1", "2"], "the queue regions have not been flushed clearly.")
+ self.send_packet_pctype(mac=self.pf_mac, pkt_type="sctp")
+ queue = self.get_queue_number()
+ self.verify(queue not in ["1", "2"], "the queue regions have not been flushed clearly.")
+ self.send_packet_pctype(mac=self.pf_mac, pkt_type="ipv4")
+ queue = self.get_queue_number()
+ self.verify(queue not in ["10", "11", "12", "13"], "the queue regions have not been flushed clearly.")
+ self.send_packet_pctype(mac=self.pf_mac, pkt_type="ipv6_tcp")
+ queue = self.get_queue_number()
+ self.verify(queue not in ["8", "9"], "the queue regions have not been flushed clearly.")
+
def test_up_map_queue_region(self):
# set queue region on a port
- self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 0 queue_num 1", "testpmd> ")
+ self.dut.send_expect("set port 0 queue-region region_id 0 queue_start_index 14 queue_num 2", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 6 queue_start_index 1 queue_num 8", "testpmd> ")
self.dut.send_expect("set port 0 queue-region region_id 2 queue_start_index 10 queue_num 4", "testpmd> ")
@@ -289,10 +305,10 @@ class TestQueue_region(TestCase):
self.dut.send_expect("set port 0 queue-region flush on", "testpmd> ")
# send the packets and verify the results
- queue_region = ["0"]
+ queue_region = ["14", "15"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="udp", prio=4)
- queue_region = ["0"]
+ queue_region = ["14", "15"]
self.send_and_check(queue_region, mac=self.pf_mac, pkt_type="udp", prio=3)
queue_region = ["1", "2", "3", "4", "5", "6", "7", "8"]
@@ -309,7 +325,7 @@ class TestQueue_region(TestCase):
self.send_packet_pctype(mac=self.pf_mac, pkt_type="udp")
queue = self.get_queue_number()
- self.verify(queue not in ["10", "11", "12", "13"], "the packet doesn't enter the expected queue.")
+ self.verify(queue in ["14", "15"], "the packet doesn't enter the expected queue.")
# clear all the queue region configuration
out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
@@ -318,10 +334,13 @@ class TestQueue_region(TestCase):
out = self.dut.send_expect("show port 0 queue-region", "testpmd> ")
self.get_and_compare_rules(out, 0, 0, 0)
- # confirm packet can't into the previous queue_region
+ # confirm packet not to the same queue after flush all the queue region rull.
self.send_packet_up(mac=self.pf_mac, pkt_type="udp", prio=7)
queue = self.get_queue_number()
self.verify(queue not in ["10", "11", "12", "13"], "the queue regions have not been flushed clearly.")
+ self.send_packet_up(mac=self.pf_mac, pkt_type="tcp", prio=2)
+ queue = self.get_queue_number()
+ self.verify(queue not in ["10", "11", "12", "13"], "the queue regions have not been flushed clearly.")
def test_boundary_values(self):
# boundary value testing of "Set a queue region on a port"
--
2.7.4
next reply other threads:[~2018-08-16 10:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-16 10:48 Peng Yuan [this message]
2018-08-20 5:32 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534416487-122625-1-git-send-email-yuan.peng@intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).