From: Peng Yuan <yuan.peng@intel.com>
To: dts@dpdk.org
Cc: Peng Yuan <yuan.peng@intel.com>
Subject: [dts] [PATCH]test_plans: add qos_meter_test_plan.rst
Date: Thu, 31 Jan 2019 17:27:40 +0800 [thread overview]
Message-ID: <1548926860-46804-1-git-send-email-yuan.peng@intel.com> (raw)
Add qos_meter_test_plan.rst to test_plans.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/test_plans/qos_meter_test_plan.rst b/test_plans/qos_meter_test_plan.rst
new file mode 100644
index 0000000..671c6ce
--- /dev/null
+++ b/test_plans/qos_meter_test_plan.rst
@@ -0,0 +1,93 @@
+.. Copyright (c) <2011-2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==================
+QoS Metering Tests
+==================
+The QoS meter sample application is an example that demonstrates the use of
+DPDK to provide QoS marking and metering, as defined by RFC2697 for Single
+Rate Three Color Marker (srTCM) and RFC 2698 for Two Rate Three Color
+Marker (trTCM) algorithm.
+
+The detailed description of the application items and mode can be found in
+https://doc.dpdk.org/guides/sample_app_ug/qos_metering.html
+
+Prerequisites
+=============
+The DUT must have two 10G Ethernet ports connected to two ports of IXIA.
+
+Assume two DUT 10G Ethernet ports' pci device id is as the following,
+
+dut_port_0 : "0000:05:00.0"
+dut_port_1 : "0000:05:00.1"
+
+1. Compile DPDK and sample
+
+2. Bind two ports to dpdk igb_uio driver::
+
+ ./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1
+
+3. The default metering mode is::
+
+ APP_MODE_SRTCM_COLOR_BLIND
+
+Test Case: srTCM blind
+======================
+1. The application is constrained to use a single core in the EAL core mask
+ and 2 ports only in the application port mask (first port from the port
+ mask is used for RX and the other port in the core mask is used for TX)::
+
+ ./build/qos_meter -c 1 -n 4 -- -p 0x3
+
+2. Assuming the input traffic is generated at line rate and all packets
+ are 64 bytes Ethernet frames (IPv4 packet size of 46 bytes) and green,
+ the expected output traffic should be marked as shown in the following
+ table:
+
+ +-------------+--------------+---------------+------------+
+ | Mode | Green (Mpps) | Yellow (Mpps) | Red (Mpps) |
+ +-------------+--------------+---------------+------------+
+ | srTCM blind | 1 | 1 | 12.88 |
+ +-------------+------------------------------+------------+
+ | srTCM color | 1 | 1 | 12.88 |
+ +-------------+------------------------------+------------+
+ | trTCM blind | 1 | 0.5 | 13.38 |
+ +-------------+------------------------------+------------+
+ | trTCM color | 1 | 0.5 | 13.38 |
+ +-------------+------------------------------+------------+
+ | FWD | 14.88 | 0 | 0 |
+ +-------------+------------------------------+------------+
+
+3. Use the default setting, the packets are 64 bytes Ethernet frames,
+ and the metering mode is srTCM blind.
+ The green packets are dropped.
+ So the valid frames received on the peer IXIA port is 13.88(Mpps).
--
2.5.0
next reply other threads:[~2019-01-31 9:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 9:27 Peng Yuan [this message]
2019-02-01 5:21 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548926860-46804-1-git-send-email-yuan.peng@intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).