* [dts] [PATCH V3][bonding/802.3ad]: test plan for testpmd bonding/802.3ad mode @ 2019-02-26 7:20 yufengmx 2019-02-26 7:20 ` yufengmx 0 siblings, 1 reply; 3+ messages in thread From: yufengmx @ 2019-02-26 7:20 UTC (permalink / raw) To: dts; +Cc: yufengmx 802.3ad mode is link bonding mode 4 in testpmd, which is IEEE 802.3ad Dynamic link aggregation.This test plan aims to cover this feature. v3: - remove trailing whitespace. v2: - remove test content using switch. - fix typo issue. yufengmx (1): [bonding/802.3ad]: test plan for testpmd bonding/802.3ad mode test_plans/pmd_bonded_8023ad_test_plan.rst | 420 +++++++++++++++++++++++++++++ 1 file changed, 420 insertions(+) create mode 100644 test_plans/pmd_bonded_8023ad_test_plan.rst -- 1.9.3 ^ permalink raw reply [flat|nested] 3+ messages in thread
* [dts] [PATCH V3][bonding/802.3ad]: test plan for testpmd bonding/802.3ad mode 2019-02-26 7:20 [dts] [PATCH V3][bonding/802.3ad]: test plan for testpmd bonding/802.3ad mode yufengmx @ 2019-02-26 7:20 ` yufengmx 2019-02-28 10:29 ` Tu, Lijuan 0 siblings, 1 reply; 3+ messages in thread From: yufengmx @ 2019-02-26 7:20 UTC (permalink / raw) To: dts; +Cc: yufengmx link bonding mode 4 is IEEE 802.3ad Dynamic link aggregation. Creates aggregation groups that share the same speed and duplex settings. Utilizes all slaves in the active aggregator according to the 802.3ad specification. DPDK realize it based on 802.1AX specification, it includes LACP protocal and Marker protocol. This mode requires a switch that supports IEEE 802.3ad Dynamic link aggregation. Signed-off-by: yufengmx <yufengx.mo@intel.com> --- test_plans/pmd_bonded_8023ad_test_plan.rst | 420 +++++++++++++++++++++++++++++ 1 file changed, 420 insertions(+) create mode 100644 test_plans/pmd_bonded_8023ad_test_plan.rst diff --git a/test_plans/pmd_bonded_8023ad_test_plan.rst b/test_plans/pmd_bonded_8023ad_test_plan.rst new file mode 100644 index 0000000..03de918 --- /dev/null +++ b/test_plans/pmd_bonded_8023ad_test_plan.rst @@ -0,0 +1,420 @@ +.. Copyright (c) <2010-2019>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + +Link Bonding for mode 4 (802.3ad) +================================= + +This test plan is mainly to test link bonding mode 4(802.3ad) function via +testpmd. + +link bonding mode 4 is IEEE 802.3ad Dynamic link aggregation. Creates +aggregation groups that share the same speed and duplex settings. Utilizes all +slaves in the active aggregator according to the 802.3ad specification. DPDK +realize it based on 802.1AX specification, it includes LACP protocal and Marker +protocol. This mode requires a switch that supports IEEE 802.3ad Dynamic link +aggregation. + +note: Slave selection for outgoing traffic is done according to the transmit +hash policy, which may be changed from the default simple XOR layer2 policy. + +Requirements +------------ +#. Bonded ports shall maintain statistics similar to normal port. + +#. The slave links shall be monitor for link status change. See also the concept + of up/down time delay to handle situations such as a switch reboots, it is + possible that its ports report "link up" status before they become usable. + +#. Upon unbonding the bonding PMD driver must restore the MAC addresses that the + slaves had before they were enslaved. + +#. According to the bond type, when the bond interface is placed in promiscuous + mode it will propagate the setting to the slave devices. + +#. LACP control packet filtering offload. It is a idea of performance + improvement, which use hardware offloads to improve packet classification. + +#. support three 802.3ad aggregation selection logic modes (stable/bandwidth/ + count). The Selection Logic selects a compatible Aggregator for a port, using + the port LAG ID. The Selection Logic may determine that the link should be + operated as a standby link if there are constraints on the simultaneous + attachment of ports that have selected the same Aggregator. + +#. technical details refer to content attached in website:: + + http://dpdk.org/ml/archives/dev/2017-May/066143.html + +#. DPDK technical details refer to:: + + dpdk/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst: + ``Link Aggregation 802.3AD (Mode 4)`` + +#. linux technical document of 802.3ad as testing reference document:: + + https://www.kernel.org/doc/Documentation/networking/bonding.txt:``802.3ad`` + +Prerequisites for Bonding +========================= +all link ports of switch/dut should be the same data rate and support full-duplex. + +Functional testing hardware configuration +----------------------------------------- +NIC and DUT ports requirements: + +- Tester: 2 ports of nic +- DUT: 2 ports of nic + +port topology diagram:: + + Tester DUT + .-------. .-------. + | port0 | <------------------> | port0 | + | port1 | <------------------> | port1 | + '-------' '-------' + +Test Case : basic behavior start/stop +===================================== +#. check bonded device stop/start action under frequency operation status + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci address 2> + +#. boot up testpmd:: + + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + +#. loop execute this step 10 times, check if bonded device still work:: + + testpmd> port stop all + testpmd> port start all + testpmd> start + testpmd> show bonding config 2 + testpmd> stop + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior mac +============================== +#. bonded device's default mac is one of each slave's mac after one slave has + been added. +#. when no slave attached, mac should be 00:00:00:00:00:00 +#. slave's mac restore the MAC addresses that the slave has before they were +enslaved. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci address 2> + +#. boot up testpmd:: + + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + +#. check bond device mac should be 00:00:00:00:00:00:: + + testpmd> show bonding config 2 + +#. add two slaves to bond port:: + + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> port start all + +#. check bond device mac should be one of each slave's mac:: + + testpmd> show bonding config 0 + testpmd> show bonding config 1 + testpmd> show bonding config 2 + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior link up/down +======================================= +#. bonded device should be down status without slaves. +#. bonded device device should have the same status of link status. +#. Active Slaves status should change with the slave status change. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci address 2> + +#. boot up testpmd:: + + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + +#. stop bonded device and check bonded device/slaves link status:: + + testpmd> port stop 2 + testpmd> show bonding config 2 + testpmd> show bonding config 1 + testpmd> show bonding config 0 + +#. start bonded device and check bonded device/slaves link status:: + + testpmd> port start 2 + testpmd> show bonding config 2 + testpmd> show bonding config 1 + testpmd> show bonding config 0 + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior promiscuous mode +============================================ +#. bonded device promiscuous mode should be ``enabled`` by default. +#. bonded device/slave device should have the same status of promiscuous mode. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci address 2> + +#. boot up testpmd:: + + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + +#. check if bonded device promiscuous mode is ``enabled``:: + + testpmd> show bonding config 2 + +#. add two slaves and check if promiscuous mode is ``enabled``:: + + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> show bonding config 0 + testpmd> show bonding config 1 + +#. disable bonded device promiscuous mode and check promiscuous mode:: + + testpmd> set promisc 2 off + testpmd> show bonding config 2 + +#. enable bonded device promiscuous mode and check promiscuous mode:: + + testpmd> set promisc 2 on + testpmd> show bonding config 2 + +#. check slaves' promiscuous mode:: + + testpmd> show bonding config 0 + testpmd> show bonding config 1 + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior agg mode +=================================== +#. stable is the default agg mode. +#. check 802.3ad aggregation mode configuration, support <agg_option>:: + ``count`` + ``stable`` + ``bandwidth`` + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci address 2> + +#. boot up testpmd:: + + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> port start all + testpmd> show bonding config 2 + testpmd> set bonding agg_mode 2 <agg_option> + +#. check if agg_mode set successful:: + + testpmd> show bonding config 2 + Bonding mode: 4 + IEEE802.3AD Aggregator Mode: <agg_option> + Slaves (2): [0 1] + Active Slaves (2): [0 1] + Primary: [0] + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : basic behavior dedicated queues +=========================================== +#. check 802.3ad dedicated queues is ``disable`` by default +#. check 802.3ad set dedicated queues, support <agg_option>:: + ``disable`` + ``enable`` + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci address 2> + +#. boot up testpmd:: + + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX + +#. run testpmd command of bonding:: + + testpmd> port stop all + testpmd> create bonded device 4 0 + testpmd> add bonding slave 0 2 + testpmd> add bonding slave 1 2 + testpmd> show bonding config 2 + +#. check if dedicated_queues disable successful:: + + testpmd> set bonding lacp dedicated_queues 2 disable + +#. check if bonded port can start:: + + testpmd> port start all + testpmd> start + +#. check if dedicated_queues enable successful:: + + testpmd> stop + testpmd> port stop all + testpmd> set bonding lacp dedicated_queues 2 enable + +#. check if bonded port can start:: + + testpmd> port start all + testpmd> start + +#. quit testpmd:: + + testpmd> stop + testpmd> quit + +Test Case : command line option +=============================== +#. check command line option:: + + slave=<0000:xx:00.0> + agg_mode=<bandwidth | stable | count> + +#. compare bonding configuration with expected configuration. + +steps +----- + +#. bind two ports:: + + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci address 2> + +#. boot up testpmd :: + + ./testpmd -c 0x0f -n 4 \ + --vdev 'net_bonding0,slave=0000:xx:00.0,slave=0000:xx:00.1,mode=4,agg_mode=<agg_option>' \ + -- -i --port-topology=chained + +#. run testpmd command of bonding:: + + testpmd> port stop all + +#. check if bonded device has been created and slaves have been bonded successful:: + + testpmd> show bonding config 2 + Bonding mode: 4 + IEEE802.3AD Aggregator Mode: <agg_option> + Slaves (2): [0 1] + Active Slaves (2): [0 1] + Primary: [0] + +#. check if bonded port can start:: + + testpmd> port start all + testpmd> start + +#. check if dedicated_queues enable successful:: + + testpmd> stop + testpmd> port stop all + +#. quit testpmd:: + + testpmd> quit \ No newline at end of file -- 1.9.3 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V3][bonding/802.3ad]: test plan for testpmd bonding/802.3ad mode 2019-02-26 7:20 ` yufengmx @ 2019-02-28 10:29 ` Tu, Lijuan 0 siblings, 0 replies; 3+ messages in thread From: Tu, Lijuan @ 2019-02-28 10:29 UTC (permalink / raw) To: Mo, YufengX, dts; +Cc: Mo, YufengX Applied, thanks > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yufengmx > Sent: Tuesday, February 26, 2019 3:20 PM > To: dts@dpdk.org > Cc: Mo, YufengX <yufengx.mo@intel.com> > Subject: [dts] [PATCH V3][bonding/802.3ad]: test plan for testpmd > bonding/802.3ad mode > > > link bonding mode 4 is IEEE 802.3ad Dynamic link aggregation. Creates > aggregation groups that share the same speed and duplex settings. Utilizes all > slaves in the active aggregator according to the 802.3ad specification. DPDK > realize it based on 802.1AX specification, it includes LACP protocal and Marker > protocol. This mode requires a switch that supports IEEE 802.3ad Dynamic link > aggregation. > > Signed-off-by: yufengmx <yufengx.mo@intel.com> > --- > test_plans/pmd_bonded_8023ad_test_plan.rst | 420 > +++++++++++++++++++++++++++++ > 1 file changed, 420 insertions(+) > create mode 100644 test_plans/pmd_bonded_8023ad_test_plan.rst > > diff --git a/test_plans/pmd_bonded_8023ad_test_plan.rst > b/test_plans/pmd_bonded_8023ad_test_plan.rst > new file mode 100644 > index 0000000..03de918 > --- /dev/null > +++ b/test_plans/pmd_bonded_8023ad_test_plan.rst > @@ -0,0 +1,420 @@ > +.. Copyright (c) <2010-2019>, Intel Corporation > + All rights reserved. > + > + Redistribution and use in source and binary forms, with or without > + modification, are permitted provided that the following conditions > + are met: > + > + - Redistributions of source code must retain the above copyright > + notice, this list of conditions and the following disclaimer. > + > + - Redistributions in binary form must reproduce the above copyright > + notice, this list of conditions and the following disclaimer in > + the documentation and/or other materials provided with the > + distribution. > + > + - Neither the name of Intel Corporation nor the names of its > + contributors may be used to endorse or promote products derived > + from this software without specific prior written permission. > + > + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND > CONTRIBUTORS > + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS > + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE > + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, > INDIRECT, > + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES > + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS > OR > + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) > + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN > CONTRACT, > + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) > + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED > + OF THE POSSIBILITY OF SUCH DAMAGE. > + > +Link Bonding for mode 4 (802.3ad) > +================================= > + > +This test plan is mainly to test link bonding mode 4(802.3ad) function > +via testpmd. > + > +link bonding mode 4 is IEEE 802.3ad Dynamic link aggregation. Creates > +aggregation groups that share the same speed and duplex settings. > +Utilizes all slaves in the active aggregator according to the 802.3ad > +specification. DPDK realize it based on 802.1AX specification, it > +includes LACP protocal and Marker protocol. This mode requires a switch > +that supports IEEE 802.3ad Dynamic link aggregation. > + > +note: Slave selection for outgoing traffic is done according to the > +transmit hash policy, which may be changed from the default simple XOR > layer2 policy. > + > +Requirements > +------------ > +#. Bonded ports shall maintain statistics similar to normal port. > + > +#. The slave links shall be monitor for link status change. See also the concept > + of up/down time delay to handle situations such as a switch reboots, it is > + possible that its ports report "link up" status before they become usable. > + > +#. Upon unbonding the bonding PMD driver must restore the MAC addresses > that the > + slaves had before they were enslaved. > + > +#. According to the bond type, when the bond interface is placed in > promiscuous > + mode it will propagate the setting to the slave devices. > + > +#. LACP control packet filtering offload. It is a idea of performance > + improvement, which use hardware offloads to improve packet classification. > + > +#. support three 802.3ad aggregation selection logic modes (stable/bandwidth/ > + count). The Selection Logic selects a compatible Aggregator for a port, using > + the port LAG ID. The Selection Logic may determine that the link should be > + operated as a standby link if there are constraints on the simultaneous > + attachment of ports that have selected the same Aggregator. > + > +#. technical details refer to content attached in website:: > + > + http://dpdk.org/ml/archives/dev/2017-May/066143.html > + > +#. DPDK technical details refer to:: > + > + dpdk/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.rst: > + ``Link Aggregation 802.3AD (Mode 4)`` > + > +#. linux technical document of 802.3ad as testing reference document:: > + > + > + https://www.kernel.org/doc/Documentation/networking/bonding.txt:``802. > + 3ad`` > + > +Prerequisites for Bonding > +========================= > +all link ports of switch/dut should be the same data rate and support full-duplex. > + > +Functional testing hardware configuration > +----------------------------------------- > +NIC and DUT ports requirements: > + > +- Tester: 2 ports of nic > +- DUT: 2 ports of nic > + > +port topology diagram:: > + > + Tester DUT > + .-------. .-------. > + | port0 | <------------------> | port0 | > + | port1 | <------------------> | port1 | > + '-------' '-------' > + > +Test Case : basic behavior start/stop > +===================================== > +#. check bonded device stop/start action under frequency operation > +status > + > +steps > +----- > + > +#. bind two ports:: > + > + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci > + address 2> > + > +#. boot up testpmd:: > + > + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX > + > +#. run testpmd command of bonding:: > + > + testpmd> port stop all > + testpmd> create bonded device 4 0 > + testpmd> add bonding slave 0 2 > + testpmd> add bonding slave 1 2 > + > +#. loop execute this step 10 times, check if bonded device still work:: > + > + testpmd> port stop all > + testpmd> port start all > + testpmd> start > + testpmd> show bonding config 2 > + testpmd> stop > + > +#. quit testpmd:: > + > + testpmd> stop > + testpmd> quit > + > +Test Case : basic behavior mac > +============================== > +#. bonded device's default mac is one of each slave's mac after one slave has > + been added. > +#. when no slave attached, mac should be 00:00:00:00:00:00 #. slave's > +mac restore the MAC addresses that the slave has before they were > +enslaved. > + > +steps > +----- > + > +#. bind two ports:: > + > + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci > + address 2> > + > +#. boot up testpmd:: > + > + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX > + > +#. run testpmd command of bonding:: > + > + testpmd> port stop all > + testpmd> create bonded device 4 0 > + > +#. check bond device mac should be 00:00:00:00:00:00:: > + > + testpmd> show bonding config 2 > + > +#. add two slaves to bond port:: > + > + testpmd> add bonding slave 0 2 > + testpmd> add bonding slave 1 2 > + testpmd> port start all > + > +#. check bond device mac should be one of each slave's mac:: > + > + testpmd> show bonding config 0 > + testpmd> show bonding config 1 > + testpmd> show bonding config 2 > + > +#. quit testpmd:: > + > + testpmd> stop > + testpmd> quit > + > +Test Case : basic behavior link up/down > +======================================= > +#. bonded device should be down status without slaves. > +#. bonded device device should have the same status of link status. > +#. Active Slaves status should change with the slave status change. > + > +steps > +----- > + > +#. bind two ports:: > + > + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci > + address 2> > + > +#. boot up testpmd:: > + > + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX > + > +#. run testpmd command of bonding:: > + > + testpmd> port stop all > + testpmd> create bonded device 4 0 > + testpmd> add bonding slave 0 2 > + testpmd> add bonding slave 1 2 > + > +#. stop bonded device and check bonded device/slaves link status:: > + > + testpmd> port stop 2 > + testpmd> show bonding config 2 > + testpmd> show bonding config 1 > + testpmd> show bonding config 0 > + > +#. start bonded device and check bonded device/slaves link status:: > + > + testpmd> port start 2 > + testpmd> show bonding config 2 > + testpmd> show bonding config 1 > + testpmd> show bonding config 0 > + > +#. quit testpmd:: > + > + testpmd> stop > + testpmd> quit > + > +Test Case : basic behavior promiscuous mode > +============================================ > +#. bonded device promiscuous mode should be ``enabled`` by default. > +#. bonded device/slave device should have the same status of promiscuous > mode. > + > +steps > +----- > + > +#. bind two ports:: > + > + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci > + address 2> > + > +#. boot up testpmd:: > + > + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX > + > +#. run testpmd command of bonding:: > + > + testpmd> port stop all > + testpmd> create bonded device 4 0 > + > +#. check if bonded device promiscuous mode is ``enabled``:: > + > + testpmd> show bonding config 2 > + > +#. add two slaves and check if promiscuous mode is ``enabled``:: > + > + testpmd> add bonding slave 0 2 > + testpmd> add bonding slave 1 2 > + testpmd> show bonding config 0 > + testpmd> show bonding config 1 > + > +#. disable bonded device promiscuous mode and check promiscuous mode:: > + > + testpmd> set promisc 2 off > + testpmd> show bonding config 2 > + > +#. enable bonded device promiscuous mode and check promiscuous mode:: > + > + testpmd> set promisc 2 on > + testpmd> show bonding config 2 > + > +#. check slaves' promiscuous mode:: > + > + testpmd> show bonding config 0 > + testpmd> show bonding config 1 > + > +#. quit testpmd:: > + > + testpmd> stop > + testpmd> quit > + > +Test Case : basic behavior agg mode > +=================================== > +#. stable is the default agg mode. > +#. check 802.3ad aggregation mode configuration, support <agg_option>:: > + ``count`` > + ``stable`` > + ``bandwidth`` > + > +steps > +----- > + > +#. bind two ports:: > + > + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci > + address 2> > + > +#. boot up testpmd:: > + > + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX > + > +#. run testpmd command of bonding:: > + > + testpmd> port stop all > + testpmd> create bonded device 4 0 > + testpmd> add bonding slave 0 2 > + testpmd> add bonding slave 1 2 > + testpmd> port start all > + testpmd> show bonding config 2 > + testpmd> set bonding agg_mode 2 <agg_option> > + > +#. check if agg_mode set successful:: > + > + testpmd> show bonding config 2 > + Bonding mode: 4 > + IEEE802.3AD Aggregator Mode: <agg_option> > + Slaves (2): [0 1] > + Active Slaves (2): [0 1] > + Primary: [0] > + > +#. quit testpmd:: > + > + testpmd> stop > + testpmd> quit > + > +Test Case : basic behavior dedicated queues > +=========================================== > +#. check 802.3ad dedicated queues is ``disable`` by default #. check > +802.3ad set dedicated queues, support <agg_option>:: > + ``disable`` > + ``enable`` > + > +steps > +----- > + > +#. bind two ports:: > + > + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci > + address 2> > + > +#. boot up testpmd:: > + > + ./testpmd -c 0xXXXXX -n 4 -- -i --tx-offloads=0xXXXX > + > +#. run testpmd command of bonding:: > + > + testpmd> port stop all > + testpmd> create bonded device 4 0 > + testpmd> add bonding slave 0 2 > + testpmd> add bonding slave 1 2 > + testpmd> show bonding config 2 > + > +#. check if dedicated_queues disable successful:: > + > + testpmd> set bonding lacp dedicated_queues 2 disable > + > +#. check if bonded port can start:: > + > + testpmd> port start all > + testpmd> start > + > +#. check if dedicated_queues enable successful:: > + > + testpmd> stop > + testpmd> port stop all > + testpmd> set bonding lacp dedicated_queues 2 enable > + > +#. check if bonded port can start:: > + > + testpmd> port start all > + testpmd> start > + > +#. quit testpmd:: > + > + testpmd> stop > + testpmd> quit > + > +Test Case : command line option > +=============================== > +#. check command line option:: > + > + slave=<0000:xx:00.0> > + agg_mode=<bandwidth | stable | count> > + > +#. compare bonding configuration with expected configuration. > + > +steps > +----- > + > +#. bind two ports:: > + > + ./usertools/dpdk-devbind.py --bind=igb_uio <pci address 1> <pci > + address 2> > + > +#. boot up testpmd :: > + > + ./testpmd -c 0x0f -n 4 \ > + --vdev > 'net_bonding0,slave=0000:xx:00.0,slave=0000:xx:00.1,mode=4,agg_mode=<agg > _option>' \ > + -- -i --port-topology=chained > + > +#. run testpmd command of bonding:: > + > + testpmd> port stop all > + > +#. check if bonded device has been created and slaves have been bonded > successful:: > + > + testpmd> show bonding config 2 > + Bonding mode: 4 > + IEEE802.3AD Aggregator Mode: <agg_option> > + Slaves (2): [0 1] > + Active Slaves (2): [0 1] > + Primary: [0] > + > +#. check if bonded port can start:: > + > + testpmd> port start all > + testpmd> start > + > +#. check if dedicated_queues enable successful:: > + > + testpmd> stop > + testpmd> port stop all > + > +#. quit testpmd:: > + > + testpmd> quit > \ No newline at end of file > -- > 1.9.3 ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-28 10:30 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-02-26 7:20 [dts] [PATCH V3][bonding/802.3ad]: test plan for testpmd bonding/802.3ad mode yufengmx 2019-02-26 7:20 ` yufengmx 2019-02-28 10:29 ` Tu, Lijuan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).